Porous and single-skinned polyethersulfone membranes support the growth of HepG2 cells: A potential biomaterial for bioartificial liver systems

Preparation Method and Application of Porous Poly(lactic acid) Membranes: A Review

Porous membrane technology has garnered significant attention in the fields of separation and biology due to its remarkable contributions to green chemistry and sustainable development. The porous membranes fabricated from polylactic acid (PLA) possess numerous advantages, including a low relative density, a high specific surface area, biodegradability, and excellent biocompatibility. As a result, they exhibit promising prospects for various applications, such as oil-water separation, tissue engineering, and drug release. This paper provides an overview of recent research advancements in the fabrication of PLA membranes using electrospinning, the breath-figure method, and the phase separation method. Firstly, the principles of each method are elucidated from the perspective of pore formation. The correlation between the relevant parameters and pore structure is discussed and summarized, subsequently followed by a comparative analysis of the advantages and limitations of each method. Subsequently, this article presents the diverse applications of porous PLA membranes in tissue engineering, oil-water separation, and other fields. The current challenges faced by these membranes, however, encompass inadequate mechanical strength, limited production efficiency, and the complexity of pore structure control. Suggestions for enhancement, as well as future prospects, are provided accordingly.

Rapid large-scale culturing of microencapsulated hepatocytes: a promising approach for cell-based hepatic support

INTRODUCTION

The efficacy of any bioartificial liver device requires both rapid production and proper bioactivity of the cells for the bioreactor. The goal of this study was to observe the effect of spinner speed and cell density on the proliferation of microencapsulated immortalized human hepatocytes (HepLL) and human hepatoma (HepG2) cells.

MATERIALS AND METHODS

Alginate-chitosan microcapsulated HepG2 and HepLL cells were randomly divided into 2 groups, and each group was further divided into 8 subgroups according to embedded cell density and spinner speed. The growth, metabolism, and functions of the encapsulated cells in each group were evaluated.

RESULTS

In each group, the cell number, ammonium removal, albumin synthesis, and diazepam clearance increased significantly with the spinner speed, whereas embedded cell density had no impact. Albumin synthesis, removal of ammonium, and diazepam clearance were significantly higher in the microencapsulated HepLL groups than in HepG2 cells at any time point, without any significant difference in cell numbers.

CONCLUSIONS

Spinner culture significantly promoted microencapsulated HepLL and HepG2 cell bioactivity. Wrapped cells had optimal function on day 10 in rolling culture groups. These data show that HepLL cells would be a promising candidate for cell-based liver support therapy.

Integration of single-layer skin hollow fibers and scaffolds develops a three-dimensional hybrid bioreactor for bioartificial livers

Bioartificial liver support systems are expected to be an effective therapy as a "bridge" for liver transplantation or reversible acute liver disease. A major roadblock in the application of bioartificial livers is the need for a bioreactor that fully meets the requirements of hepatocyte culture, mass transfer and immunobarriers. In this study, we developed a three-dimensional hybrid bioreactor (3DHB) on a base of single-layer skin polyethersulfone hollow fibers by integrating with polyurethane scaffolds. The mass transfer of bilirubin and albumin from the intracapillary space to the extracapillary space of the hollow fibers was not significantly different between 3DHBs and hollow fiber bioreactors (HFBs). Cell viability staining showed that high-density hepatocytes were uniformly found in different regions of the 3DHB after 7 days of culture. Liver-specific functions of human mature hepatocytes cultured in the 3DHB, such as albumin secretion, urea production, ammonia removal rate and cytochrome P450 activity, were maintained stably and were significantly higher compared with the HFB. These results indicated that the 3DHB has good mass transfer and improves cell distribution and liver-specific functions. Meanwhile, the ammonia and unconjugated bilirubin concentrations in plasma from patients with liver failure were significantly decreased during 6 h of circulation by hepatocytes cultured in the 3DHB. Most hepatocytes in the 3DHB were viable after 6 h exposure to the patient plasma. We further demonstrated that bioartificial liver systems with 3DHB can remove toxins from and endure the deleterious effects of the patient plasma. Therefore, the 3DHB has the potential to accomplish different actions for the clinical application of bioartificial livers.

Bifunctional polyethersulfone hollow fiber with a porous, single-layer skin for use as a bioartificial liver bioreactor

A bioartificial liver bioreactor requires a bifunctional hollow fiber that is hemocompatible on one side and cytocompatible on the other side. In this study, we developed a single-layer skin polyethersulfone (PES) hollow fiber with smooth inner surface and rough/porous outer surface for an artificial liver bioreactor. The hemocompatibility of the inner surface was evaluated by hemolysis, complement activation and clotting time. The cytocompatibility of the outer surface with HepG2 cells was examined by morphology, proliferation and liver-specific functions. The inner surface of the PES hollow fiber exhibited lower hemolysis and complement activation than cellulose acetate (CA) hollow fiber and a prolonged blood coagulation time. HepG2 cells readily adhered to the outer surfaces of the PES hollow fibers, and proliferated to form multicellular aggregates with time. Furthermore, HepG2 cells cultured on the outer surface of the PES hollow fiber exhibited higher proliferation ability and liver-specific functions than those grown on the CA hollow fiber. These results suggest that the single-layer skin PES hollow fiber is a bifunctional hollow fiber with good hemocompatibility on the inner side and cytocompatibility on the outer side. Thus, porous and single-layer skin PES hollow fibers may have potential as materials for an artificial liver bioreactor.