Genipin crosslinked chitosan/PEO nanofibrous scaffolds exhibiting an improved microenvironment for the regeneration of articular cartilage

Preparation and characterization of structural and antifouling properties of chitosan/polyethylene oxide membranes

It aims to prepare the chitosan (CS) and polyethylene oxide (PEO) hydrogel membranes with different CS/PEO blend ratios (100:0, 95:5, 90:10, 80:20 and 70:30) via solvent casting. The physicochemical properties of these membranes were investigated using various characterization techniques: Fourier Transform Infrared Spectroscopy (FTIR), X-ray diffraction (XRD), differential scanning calorimetry (DSC), scanning electron microscopy (SEM), atomic force microscopy (AFM), energy dispersive X-ray (EDX), contact angle, and tensile testing. The interaction of PEO and chitosan was investigated by DSC in terms of freezing bound, freezing free, and non-freezing PEO fraction. The cross-sectional surface morphology of membranes displayed a smoother surface with increasing PEO content up to 20 %, beyond which nonhomogeneity on the surface was visible. The antifouling behavior of membranes was investigated by bacterial adherence study, which showed an enhanced antifouling nature of membranes with the increase in the PEO content. The peeling strength of the membranes was measured using a 90° angle peeling test, and it was found that 20 % and more PEO content promotes easy removal from the gelatin slab. In addition to this, live/ dead assay of the CS was performed to visualize the presence of live and dead bacteria on the surface. The CS/PEO blend with 20 % PEO content has properties makes it suitable for use as a protective layer on wound dressings to prevent bacterial growth. It's use in wound dressings has the potential to reduce the pain during the time of dressing removal and improve patient outcomes. The present investigation leads to the development of a CS hydrogel matrix which exhibits very interesting interaction with the PEO moiety along with its innovative feature of antifouling and antimicrobial nature.

Repair of annulus fibrosus defects using decellularized annulus fibrosus matrix/chitosan hybrid hydrogels

Degenerative disc disease is the leading cause of lower back and leg pain, considerably impacting daily life and incurring substantial medical expenses for those affected. The development of annulus fibrosus tissue engineering offers hope for treating this condition. However, the current annulus fibrosus tissue engineering scaffolds fail to accurately mimic the natural biological environment of the annulus fibrosus, resulting in limited secretion of extracellular matrix produced by the seeded cells and poor biomechanical properties of the constructed biomimetic annulus fibrosus tissue. This inability to match the biomechanical performance of the natural annulus fibrosus hinders the successful treatment of annulus fibrosus defects. In this study, we fabricated decellularized annulus fibrosus matrix (DAFM)/chitosan hydrogel-1 (DAFM: Chitosan 6:2) and DAFM/chitosan hydrogel-2 (DAFM: Chitosan 4:4) by varying the ratio of DAFM to chitosan. Rat annulus fibrosus (AF)-derived stem cells were cultured on these hydrogel scaffolds, and the cell morphology, AF-related gene expression, and Interleukin-6 (IL-6) levels were investigated. Additionally, magnetic resonance imaging, Hematoxylin and eosin staining, and Safranine and Fast Green staining were performed to evaluate the repair effect of the DAFM/chitosan hydrogels in vivo. The gene expression results showed that the expression of Collagen type I (Col-I), Collagen type I (Col-II), and aggrecan by annulus fibrosus stem cells (AFSCs) cultured on the DAFM/chitosan-1 hydrogel was higher compared with the DAFM/chitosan-2 hydrogel. Conversely, the expression of metalloproteinase-9 (MMP-9) and IL-6 was lower on the DAFM/chitosan-1 hydrogel compared with the DAFM/chitosan-2 hydrogel. In vivo, both the DAFM/chitosan-1 and DAFM/chitosan-2 hydrogels could partially repair large defects of the annulus fibrosus in rat tail vertebrae. In conclusion, the DAFM/chitosan-1 hydrogel could be regarded as a candidate scaffold material for the repair of annulus fibrosus defects, offering the potential for improved treatment outcomes.

Application of chitosan with different molecular weights in cartilage tissue engineering

Cartilage tissue engineering involves the invention of novel implantable cartilage replacement materials to help heal cartilage injuries that do not heal themselves, aiming to overcome the shortcomings of current clinical cartilage treatments. Chitosan has been widely used in cartilage tissue engineering because of its similar structure to glycine aminoglycan, which is widely distributed in connective tissues. The molecular weight, as an important structural parameter of chitosan, affects not only the method of chitosan composite scaffold preparation but also the effect on cartilage tissue healing. Thus, this review identifies methods for the preparation of chitosan composite scaffolds with low, medium and high molecular weights, as well as a range of chitosan molecular weights appropriate for cartilage tissue repair, by summarizing the application of different molecular weights of chitosan in cartilage repair in recent years.

Electrospun hybrid nanofibers: Fabrication, characterization, and biomedical applications

Nanotechnology is one of the most promising technologies available today, holding tremendous potential for biomedical and healthcare applications. In this field, there is an increasing interest in the use of polymeric micro/nanofibers for the construction of biomedical structures. Due to its potential applications in various fields like pharmaceutics and biomedicine, the electrospinning process has gained considerable attention for producing nano-sized fibers. Electrospun nanofiber membranes have been used in drug delivery, controlled drug release, regenerative medicine, tissue engineering, biosensing, stent coating, implants, cosmetics, facial masks, and theranostics. Various natural and synthetic polymers have been successfully electrospun into ultrafine fibers. Although biopolymers demonstrate exciting properties such as good biocompatibility, non-toxicity, and biodegradability, they possess poor mechanical properties. Hybrid nanofibers from bio and synthetic nanofibers combine the characteristics of biopolymers with those of synthetic polymers, such as high mechanical strength and stability. In addition, a variety of functional agents, such as nanoparticles and biomolecules, can be incorporated into nanofibers to create multifunctional hybrid nanofibers. Due to the remarkable properties of hybrid nanofibers, the latest research on the unique properties of hybrid nanofibers is highlighted in this study. Moreover, various established hybrid nanofiber fabrication techniques, especially the electrospinning-based methods, as well as emerging strategies for the characterization of hybrid nanofibers, are summarized. Finally, the development and application of electrospun hybrid nanofibers in biomedical applications are discussed.

Polyethylene Oxide Assisted Fish Collagen-Poly-ε-Caprolactone Nanofiber Membranes by Electrospinning

Fish collagen has higher biocompatibility and lower immunogenicity than terrestrial collagen, and is currently one of the important raw materials for preparing biological materials. In this study, PEO was used as a spinning aid to prepare fish skin collagen-PCL nanofiber membranes by electrospinning, and the process was optimized to get smooth nanofibers. The morphological and mechanical properties of collagen-PCL nanofiber membranes were assessed by scanning electron microscopy (SEM). The changes in chemical composition due to the incorporation of collagen into PCL and PEO were determined by Fourier Transform infrared spectroscopy (FTIR). The biocompatibility of the collagen-PCL nanofiber membranes was evaluated in vitro in cultures of mouse fibroblasts and in vivo by subcutaneous implantation studies in rats. It was found that the diameter of the spun fibers became fine and smooth when the ratio of the collagen/PCL increased. The finally obtained nanofiber had good mechanical strength, porosity, and hydrophilicity, and could promote cell adhesion and proliferation. The FC-PCL nanofiber membrane prepared by this route opens a new way to prepare fish collagen biomaterials with electrospinning.