Recent advances in wearable actuated ankle-foot orthoses: Medical effects, design, and control

This paper presents a survey on recent advances of wearable actuated ankle-foot orthoses (AAFOs). First of all, their medical functions are investigated. From the short-term aspect, they lead to rectification of pathological gaits, reduction of metabolic cost, and improvement of gait performance. After AAFO-based walking training with sufficient time, free walking performance can be enhanced. Then, key design factors are studied. First, primary design parameters are investigated. Second, common actuators are analysed. Third, human-robot interaction (HRI), ergonomics, safety, and application places, are considered. In the following section, control technologies are reviewed from the aspects of rehabilitation stages, gait feature quantities, and controller characteristics. Finally, existing problems are discussed; development trends are prospected.

A Survey on Design and Control of Lower Extremity Exoskeletons for Bipedal Walking

Exoskeleton robots are electrically, pneumatically, or hydraulically actuated devices that externally support the bones and cartilage of the human body while trying to mimic the human movement capabilities and augment muscle power. The lower extremity exoskeleton device may support specific human joints such as hip, knee, and ankle, or provide support to carry and balance the weight of the full upper body. Their assistive functionality for physically-abled and disabled humans is demanded in medical, industrial, military, safety applications, and other related fields. The vision of humans walking with an exoskeleton without external support is the prospect of the robotics and artificial intelligence working groups. This paper presents a survey on the design and control of lower extremity exoskeletons for bipedal walking. First, a historical view on the development of walking exoskeletons is presented and various lower body exoskeleton designs are categorized in different application areas. Then, these designs are studied from design, modeling, and control viewpoints. Finally, a discussion on future research directions is provided.

State of the art in parallel ankle rehabilitation robot: a systematic review

Background

The ankle joint complex (AJC) is of fundamental importance for balance, support, and propulsion. However, it is particularly susceptible to musculoskeletal and neurological injuries, especially neurological injuries such as drop foot following stroke. An important factor in ankle dysfunction is damage to the central nervous system (CNS). Correspondingly, the fundamental goal of rehabilitation training is to stimulate the reorganization and compensation of the CNS, and to promote the recovery of the motor system’s motor perception function. Therefore, an increasing number of ankle rehabilitation robots have been developed to provide long-term accurate and uniform rehabilitation training of the AJC, among which the parallel ankle rehabilitation robot (PARR) is the most studied. The aim of this study is to provide a systematic review of the state of the art in PARR technology, with consideration of the mechanism configurations, actuator types with different trajectory tracking control techniques, and rehabilitation training methods, thus facilitating the development of new and improved PARRs as a next step towards obtaining clinical proof of their rehabilitation benefits.

Methods

A literature search was conducted on PubMed, Scopus, IEEE Xplore, and Web of Science for articles related to the design and improvement of PARRs for ankle rehabilitation from each site’s respective inception from January 1999 to September 2020 using the keywords “ parallel”, “ ankle”, and “ robot”. Appropriate syntax using Boolean operators and wildcard symbols was utilized for each database to include a wider range of articles that may have used alternate spellings or synonyms, and the references listed in relevant publications were further screened according to the inclusion criteria and exclusion criteria.

Results and discussion

Ultimately, 65 articles representing 16 unique PARRs were selected for review, all of which have developed the prototypes with experiments designed to verify their usability and feasibility. From the comparison among these PARRs, we found that there are three main considerations for the mechanical design and mechanism optimization of PARRs, the choice of two actuator types including pneumatic and electrically driven control, the covering of the AJC’s motion space, and the optimization of the kinematic design, actuation design and structural design. The trajectory tracking accuracy and interactive control performance also need to be guaranteed to improve the effect of rehabilitation training and stimulate a patient’s active participation. In addition, the parameters of the reviewed 16 PARRs are summarized in detail with their differences compared by using figures and tables in the order they appeared, showing their differences in the two main actuator types, four exercise modes, fifteen control strategies, etc., which revealed the future research trends related to the improvement of the PARRs.

Conclusion

The selected studies showed the rapid development of PARRs in terms of their mechanical designs, control strategies, and rehabilitation training methods over the last two decades. However, the existing PARRs all have their own pros and cons, and few of the developed devices have been subjected to clinical trials. Designing a PARR with three degrees of freedom (DOFs) and whereby the mechanism’s rotation center coincides with the AJC rotation center is of vital importance in the mechanism design and optimization of PARRs. In addition, the design of actuators combining the advantages of the pneumatic-driven and electrically driven ones, as well as some new other actuators, will be a research hotspot for the development of PARRs. For the control strategy, compliance control with variable parameters should be further studied, with sEMG signal included to improve the real-time performance. Multimode rehabilitation training methods with multimodal motion intention recognition, real-time online detection and evaluation system should also be further developed to meet the needs of different ankle disability and rehabilitation stages. In addition, the clinical trials are in urgent need to help the PARRs be implementable as an intervention in clinical practice.

Trends and Technologies in Rehabilitation of Foot Drop: A Systematic Review

INTRODUCTION

Foot Drop (FD) is a condition, which is very commonly found in post-stoke patients; however it can also be seen in patients with multiple sclerosis, and cerebral palsy. It is a sign of neuromuscular damage caused by the weakness of the muscles. There are various approaches of FD's rehabilitation, such as physiotherapy, surgery, and the use of technological devices. Recently, researchers have worked on developing various technologies to enhance assisting and rehabilitation of FD.

AREAS COVERED

This review analyzes different types of technologies available for FD. This include devices that are available commercially or still under research. 101 studies published between 2015 and 2020 were identified for the review, many were excluded due to various reasons, e.g., were not robot-based devices, did not include FD as one of the targeted diseases, or was insufficient information. 24 studies that met our inclusion criteria were assessed. These studies were further classified into two different categories: robot-based ankle-foot orthosis (RAFO) and Functional Electrical Stimulation (FES) devices.

EXPERT OPINION

Studies included showed that both RAFO and FES showed considerable improvement in the gait cycle of the patients. Future trends are inclining towards integrating FES with other neuro-concepts such as muscle-synergies for further developments.

Parametric design optimization of an ankle rehabilitation robot using SolidWorks

This paper presents the approach to determine most suitable dimensions and volume of the proposed ankle rehabilitation robot design. This design aim is the robot needs to be portable without compromising the workspace of the proposed robot and it must fulfill all required basic ankle motions. To do this, optimisation was used to generate possible initial dimensions in order to achieve suitable length for the outer frame through minimization of the dimensions. Based on the selected variables and constraints, the result of the optimization shows minimization of the proposed design has been achieved through reduction of the dimension of the outer frame of the robot in which translate the reduction of the weight of the robot.

Design and Performance Evaluation of a Novel Wearable Parallel Mechanism for Ankle Rehabilitation

Repetitive and intensive physiotherapy is indispensable to patients with ankle disabilities. Increasingly robot-assisted technology has been employed in the treatment to reduce the burden of the therapists and the related costs of the patients. This paper proposes a configuration of a wearable parallel mechanism to supplement the equipment selection for ankle rehabilitation. The kinematic analysis, i.e., the inverse position solution and Jacobian matrices, is elaborated. Several performance indices, including the reachable workspace index, motion isotropy index, force transfer index, and maximum torque index, are developed based on the derived kinematic solution. Moreover, according to the proposed kinematic configuration and wearable design concept, the mechanical structure that contains a basic machine-drive system and a multi-model position/force data collection system is designed in detail. Finally, the results of the performance evaluation indicate that the wearable parallel robot possesses sufficient motion isotropy, high force transfer performance, and large maximum torque performance within a large workspace that can cover all possible range of motion of human ankle complex, and is suitable for ankle rehabilitation.

Wearable Ankle Robots in Post-stroke Rehabilitation of Gait: A Systematic Review

Background: Stroke causes weak functional mobility in survivors and affects the ability to perform activities of daily living. Wearable ankle robots are a potential intervention for gait rehabilitation post-stroke. Objective: The aim of this study is to provide a systematic review of wearable ankle robots, focusing on the overview, classification and comparison of actuators, gait event detection, control strategies, and performance evaluation. Method: Only English-language studies published from December 1995 to July 2018 were searched in the following databases: PubMed, EMBASE, Web of Science, Scopus, IEEE Xplore, Science Direct, SAGE journals. Result: A total of 48 articles were selected and 97 stroke survivors participated in these trials. Findings showed that few comparative trials were conducted among different actuators or control strategies. Moreover, mixed sensing technology which combines kinematic with kinetic information was effective in detecting motion intention of stroke survivors. Furthermore, all the selected clinical studies showed an improvement in the peak dorsiflexion degree of the swing phase, propulsion on the paretic side during push-off, and further enhanced walking speed after a period of robot-assisted ankle rehabilitation training. Conclusions: Preliminary findings suggest that wearable ankle robots have certain clinical benefits for the treatment of hemiplegic gait post-stroke. In the near future, a multicenter randomized controlled clinical trial is extremely necessary to enhance the clinical effectiveness of wearable ankle robots.

Research on an Ankle Joint Auxiliary Rehabilitation Robot with a Rigid-Flexible Hybrid Drive Based on a 2-S'PS' Mechanism

An ankle joint auxiliary rehabilitation robot has been developed, which consists of an upper platform, a lower platform, a dorsiflexion/plantar flexion drive system, a varus/valgus drive system, and some connecting parts. The upper platform connects to the lower platform through a ball pin pair and two driving branch chains based on the S′PS′ mechanism. Although the robot has two degrees of freedom (DOF), the upper platform can realize three kinds of motion. To achieve ankle joint auxiliary rehabilitation, the ankle joint of patients on the upper platform makes a bionic motion. The robot uses a centre ball pin pair as the main support to simulate the motion of the ankle joint; the upper platform and the centre ball pin pair construct a mirror image of a patient's foot and ankle joint, which satisfies the human body physiological characteristics; the driving systems adopt a rigid-flexible hybrid structure; and the dorsiflexion/plantar flexion motion and the varus/valgus motion are decoupled. These structural features can avoid secondary damage to the patient. The rehabilitation process is considered, and energy consumption of the robot is studied. An experimental prototype demonstrates that the robot can simulate the motion of the human foot.

Design and Workspace Analysis of a Parallel Ankle Rehabilitation Robot (PARR)

The ankle rehabilitation robot is essential equipment for patients with foot drop and talipes valgus to make up deficiencies of the manual rehabilitation training and reduce the workload of rehabilitation physicians. A parallel ankle rehabilitation robot (PARR) was developed which had three rotational degrees of freedom around a virtual stationary center for the ankle joint. The center of the ankle should be coincided with the virtual stationary center during the rehabilitation process. Meanwhile, a complete information acquisition system was constructed to improve the human-machine interactivity among the robot, patients, and physicians. The physiological motion space (PMS) of ankle joint in the autonomous and boundary elliptical movements was obtained with the help of the RRR branch and absolute encoders. The natural extreme postures of the ankle complex are the superposition of the three typical movements at the boundary motions. Based on the kinematic model of PARR, the theoretical workspace (TWS) of the parallel mechanism was acquired using the limit boundary searching method and could encircle PMS completely. However, the effective workspace (EWS) was smaller than TWS due to the physical structure, volume, and interference of mechanical elements. In addition, EWS has more clinical significance for the ankle rehabilitation. The PARR prototype satisfies all single-axis rehabilitations of the ankle and can cover most compound motions of the ankle. The goodness of fit of PMS can reach 93.5%. Hence, the developed PARR can be applied to the ankle rehabilitation widely.

Robot-assisted ankle rehabilitation: a review

Aim: The aim of this review paper is to summarize recent developments and research in robotics, relevant to the field of ankle rehabilitation, to overview new findings and determine the actual state of the art.Method: The literature search was performed using scientific and medical databases (Scopus, PubMed and Web of Science) and other websites related to robots used in the area of ankle rehabilitation, analysing studies from 1950s to present. Information about the mechanical and kinematic specifications, actuation and stage of development was extracted from the selected literature.Results: Several types of rehabilitation robots have been considered, and they were classified depending on their architecture and design features. We we found that, regardless of the differences in architectures, only a few of them have been commercialized. The majority of rehabilitation robots designs allows plantarflexion-dorsiflexion movements. Unless some exceptions, most of the wearable robots do not allow the adduction-abduction movement. Neither the physical appearance of the robot nor the user's perception towards it has not regularly been taken into account in the design stage. This limits the possibility of successful commercialization.Conclusions: Up to the present moment, the main challenges in the field of robot rehabilitation are the lack of unique rehabilitation protocols capable to fulfil the needs of all types of patients and the additional resources to measure the effectiveness of proposals that have not yet been commercialized. Nonetheless, we have mentioned above three areas were the challenges in design are more pressing. The first one is the robot architecture, which still presents some incommodities nowadays to emulate the ankle joint movement in a natural way. Thus, the displacements experienced by the axes in the joint must be adaptable to each patient and a wide range of pathologies. Moreover, many proposals are not been conceived to the purpose of commercialization, and even less to become an object of personal use.Implications for rehabilitationThis review states that the use of robotic devices for ankle rehabilitation is a consolidated paradigm in the ankle's rehabilitation.Platform-based robots allow to do complex and specialized spatial movements and these architectures endow the device with high stiffness, a balanced force distribution and better adaptability to the mechanical properties of human ankle joints. Unless some exceptions, most of the wearable robots do not allow the adduction-abduction movement.For a full integration of these technologies in the ankle's rehabilitation field, more clinical evaluations are needed.Regardless of the potential of robotic devices in rehabilitation, only a few of them have been commercialized.

Toward Standardizing the Classification of Robotic Gait Rehabilitation Systems

With the existence of numerous rehabilitation systems, classification and comparison becomes difficult, especially due to the many factors involved. Moreover, most current reviews are descriptive and do not provide systematic methods for the visual comparison of systems. This review proposes a method for classifying systems and representing them graphically to easily visualize various characteristics of the different systems at the same time. This method could be an introduction for standardizing the evaluation of gait rehabilitation systems. It evaluates four main modules (body weight support, reciprocal stepping mechanism, pelvis mechanism, and environment module) of 27 different gait systems based on a set of characteristics. The combination of these modular evaluations provides a description of the system "in the space of rehabilitation." The evaluation of each robotic module, based on specific characteristics, showed diverse tendencies. While there is an augmented interest in developing more sophisticated reciprocal stepping mechanisms, few researchers are dedicated to enhance the properties of pelvis mechanisms.

Moving toward Soft Robotics: A Decade Review of the Design of Hand Exoskeletons

Soft robotics is a branch of robotics that deals with mechatronics and electromechanical systems primarily made of soft materials. This paper presents a summary of a chronicle study of various soft robotic hand exoskeletons, with different electroencephalography (EEG)- and electromyography (EMG)-based instrumentations and controls, for rehabilitation and assistance in activities of daily living. A total of 45 soft robotic hand exoskeletons are reviewed. The study follows two methodological frameworks: a systematic review and a chronological review of the exoskeletons. The first approach summarizes the designs of different soft robotic hand exoskeletons based on their mechanical, electrical and functional attributes, including the degree of freedom, number of fingers, force transmission, actuation mode and control strategy. The second approach discusses the technological trend of soft robotic hand exoskeletons in the past decade. The timeline analysis demonstrates the transformation of the exoskeletons from rigid ferrous materials to soft elastomeric materials. It uncovers recent research, development and integration of their mechanical and electrical components. It also approximates the future of the soft robotic hand exoskeletons and some of their crucial design attributes.

Measuring the 3D motion space of the human ankle

BACKGROUND

The 3D motion space of the human ankle is an important area of study in medicine. The 3D motion space can provide significant information for establishing more reasonable rehabilitation procedures and standards of ankle injury care.

OBJECTIVE

This study aims to measure the 3D motion space of the human ankle and to use mathematical methods to quantify it.

METHODS

A motion capturing system was used to simultaneously capture the 3D coordinates of points marked on the foot, and convert these coordinate values into rotation angles through trigonometric functions and vectors. The mathematical expression of the ankle's motion space was obtained by screening, arranging, and fitting the converted data.

RESULTS

The mathematical expression of the 3D motion space of the participants was obtained. We statistically analyzed the data and learned that, in terms of 3D motion space, the right foot is more flexible than the left foot and the female foot is more flexible than the male foot.

CONCLUSIONS

The adduction and abduction rotation ranges are affected by the plantar flexion or dorsal flexure rotation angles. This relationship can be expressed mathematically, which is significant in the study of the ankle joint.

Design and development of platform ankle rehabilitation robot with Shape Memory Alloy based actuator

Various ankle rehabilitation robots have been developed in the recent decade to improve ankle strength and mobility and to alleviate the burdens on clinicians and physiotherapists. However, existing designs have stiff actuating mechanism, heavy and bulky electromagnetic or pneumatic actuators. This paper introduces ankle rehabilitation robot that utilizes Shape Memory Alloy (SMA) wire actuator to provide foot plantarflexion and dorsiflexion during rehabilitation exercise. SMA wire is a smart material that can contract when it is heated and expand back to its original shape when it is cooled. It also has high power to weight ratio. However, the SMA wire has low cooling rate thus limits its operating frequency. A periodical cooling mechanism is proposed here. Its efficacy is then evaluated against natural cooling and continuous forced convection. The experimental study shows promising results and demonstrates that periodical cooling has both the advantages of natural cooling and forced convection and can improve the cooling rate of SMA wire actuator.