Increased Intramural Retention After Local Delivery of Molecules with Increased Binding Properties: Implications for Regional Delivery of Pharmacologic Agents

Delivery of gene and cellular therapies for heart disease

Although there has been considerable interest in the utilization of gene and cellular therapy for heart disease in recent years, there remain critical questions prior to widespread promotion of therapy, and key among these issues is the delivery method used for both gene therapy and cellular therapy. Much of the failure of gene and cellular therapy can be explained by the biological therapy itself; however, certainly there is a critical role played by the delivery technique, in particular, those that have been adapted from routine clinical use such as intravenous and intracoronary injection. Development of novel techniques to deliver gene and cellular therapy has ensued with some preclinical and even clinical success, though questions regarding safety, invasiveness, and repeatability remain. Here, we review techniques for gene and cellular therapy delivery, both existing and adapted techniques, and novel techniques that have emerged recently at promoting improved efficacy of therapy without the cost of systemic distribution. We also highlight key issues that need to be addressed to improve the chances of success of delivery techniques to enhance therapeutic benefit.

Lesion complexity determines arterial drug distribution after local drug delivery

Though stents are deployed in diseased arteries drug distribution has only been quantified in intact, non-diseased vessels. We correlated steady-state arterial drug distribution with tissue ultrastructure and composition in abdominal aortae from atherosclerotic human autopsy specimens and rabbits with lesions induced by dietary manipulation and controlled injury. Paclitaxel, everolimus, and sirolimus depositions in the human aortae were maximal in the media and scaled inversely with lipid content. Net tissue paclitaxel and everolimus levels were indistinguishable in mildly injured rabbit arteries independent of diet. Yet, serial sectioning of cryopreserved arterial segments demonstrated a differential transmural deposition pattern that was amplified with disease and correlated with the expression of their intracellular targets, tubulin and FKBP-12. Tubulin distribution and paclitaxel binding increased with vascular injury and macrophage infiltration, and were reduced with lipid content. Sirolimus analogs and their specific binding target FKBP-12 were less sensitive to alterations of diet in mildly injured arteries, presumably reflecting a faster transient response of FKBP-12 to injury. The data demonstrate that disease-induced changes in the distribution of drug-binding proteins and interstitial lipid alter the distribution of these drugs, forcing one to consider how disease might affect the evaluation and efficacy of the local release of these and like compounds.

Site-specific intracoronary delivery of octreotide in humans: a pharmacokinetic study to determine dose-efficacy in restenosis prevention

Somatostatin analogues have been shown to inhibit smooth muscle cell proliferation after local administration in vivo in animal models and in vitro using human coronary smooth muscle cell cultures. However, the optimal dosage for attaining effective site-specific administration remains undefined. This study was performed to determine the required theoretical dose of the somatostatin analogue, octreotide, to be delivered site specifically, for prevention of restenosis after coronary angioplasty in humans using a previously described methodology to determine regional pharmacokinetics of site-specific intracoronary administrated compounds. In 7 patients, 111In-octreotide, a gamma-labeled somatostatin analogue, was infused post angioplasty at the site of dilatation via a coil-balloon and quantified using a radio-isotopic technique. Efficiency of delivery ranged from 0.1% to 2.7% of the total infused dose of 0.18 microg, corresponding to a mean peak delivered amount of 1.8 +/- 1.9 ng. Total locally bioavailable 111In-octreotide reached 2.28 +/- 2.15 ng h. Based on current in vitro bioavailability and peak concentration data to inhibit proliferation and thymidine incorporation in human coronary smooth muscle cells, a 4000x higher averaged dose (approximately 700 microg) should be infused site specifically to obtain a biologic efficacy in 50% of the treated patients (ED50). Quantification of regional pharmacokinetics enables the determination of a theoretical site-specific dose for achieving appropriate bioavailability above the therapeutic threshold concentration for smooth muscle cell inhibition. This approach is proposed for the determination of the appropriate site-specific coronary infusion dose for the inhibition of restenosis after balloon angioplasty.

Separate and combined effects of local and continuous intravenous administration of beta-cyclodextrin tetradecasulfate on intimal hyperplasia after angioplasty in porcine coronary arteries

BACKGROUND

Beta-Cyclodextrin tetradecasulfate binds fibroblast growth factors and possesses anticoagulant properties. This study was designed to assess the separate and combined effects of local intramural delivery and intravenous administration of beta-cyclodextrin tetrade-casulfate on neointimal formation and arterial damage following angioplasty.

METHODS AND RESULTS

Fifty-two pigs randomized into four groups underwent coronary artery angioplasty: 1) control, 2) continuous intravenous infusion of 100 mg/kg/d of beta-cyclodextrin tetradecasulfate, 3) intramural delivery of 1250 mg beta-cyclodextrin tetradecasulfate, 4) intramural delivery of 1250 mg beta-cyclodextrin tetradecasulfate followed by continuous intravenous infusion of 100 mg/kg/d. Fourteen days after injury, morphometric analysis revealed that arteries randomized to the intravenous beta-cyclodextrin tetradecasulfate groups had a decreased normalized neointima area: control, 3.03 +/- 0.75 mm(2); intravenous, 1.67 +/- 0.73 mm(2) (40% decrease; P < 10(-7)); intravenous plus local, 1.95 +/- 0.76 mm(2) (30% decrease; P < 10(-5)). There was no difference in neointimal response following local beta-cyclodextrin tetradecasulfate delivery only (2.82 +/- 1.14 mm(2)). Coronary arterial damage, defined as aneurysm, dissection, adventitial rupture, and retromedial hematoma was similar in all groups (12% in control and local groups, 10% in the intravenous group, 14% in the intravenous plus local; NS). Bleeding complications were more frequent in the intravenous and intravenous plus local groups compared to the local and control groups (23%vs 7.6% and 0%, respectively; P < 0.05).

CONCLUSIONS

Continuous intravenous administration of beta-cyclodextrin tetradecasulfate substantially reduced intimal hyperplasia, while intramural delivery had no effect, indicating that a single bolus of beta-cyclodextrin tetradecasulfate did not reduce intimal hyperplasia. There was no additive effect of local intramural delivery of beta-cyclodextrin tetradecasulfate. However, local delivery of beta-cyclodextrin tetradecasulfate induced less bleeding complications and did not lead to additional arterial injury, indicating that local delivery of an anticoagulant does not cause additional arterial injury.

Binding and retention of polycationic peptides and dendrimers in the vascular wall

Extracellular matrix (ECM) of tissues, vascular tissue in particular, contains a high concentration of negatively charged glycosaminoglycans (GAGs), which are involved in the regulation of cell motility, cell proliferation and the regulation of enzyme activities. Previously, we have shown that the vascular ECM is capable of binding an extremely high concentration of positively charged molecules, such as polylysine. Vascular ECM can be used therefore as a substrate for binding and retention of drugs delivered intravascularly, if these drugs are endowed with an ability to bind to the vascular ECM. In this study, we evaluated a number of positively charged molecules as potential affinity vehicles for delivery of drugs to the vascular ECM. We labelled the molecules of interest with fluorescence and compared them ex vivo in terms of binding and retention in the de-endothelialised rat carotid artery after intravascular delivery under pressure. High molecular weight polylysine (84 kDa) and polyamidoamine (PAMAM) dendrimers accumulated in the wall of the artery up to a concentration of 10 mg/ml and were not washed away significantly after 4 h of perfusion of the artery. A 24-mer peptide containing a consensus sequence for binding to GAGs (ARRRAARA)(3), 2.7 kDa, was comparable to high molecular weight polylysine and dendrimers in terms of binding and retention. A 14-mer GAG-binding peptide from vitronectin and low molecular weight polylysine, 3 kDa, accumulated in the vascular wall up to about 3 mg/ml and was washed away after 30 min of perfusion. A 10-mer consensus GAG-binding peptide did not bind significantly to the vascular tissue. We conclude that the consensus 24-mer GAG-binding peptide is by far superior to polylysine of a similar molecular weight in terms of binding to vascular tissue, and can provide high accumulation and long-term retention of a low molecular weight compound (fluorescein, as a model molecule) in the vascular wall. Rationally designed GAG-binding peptides can be useful as affinity vehicles for targeting drugs to the vascular ECM.

Adenovirus-catheter compatibility increases gene expression after delivery to porcine myocardium

Endomyocardial injection of adenoviral gene vectors enables localized delivery to comprised myocardial tissue. However, many materials used in endomyocardial delivery catheters may not be compatible with adenoviral gene vectors. In this study, a series of catheter-based endocardial and epicardial (direct visualization) procedures were performed to assess catheter-adenovirus compatibility in an in vivo model. A standard Nitinol-stainless steel (Ni-SS) catheter was compared with a novel Stiletto catheter designed for improved biocompatibility. In 4 animals 40 endocardial injections of adenovirus encoding beta-galactosidase (beta-Gal) were performed with the 2 catheters. After sectioning of the hearts only 8 of 20 Ni-SS beta-Gal+ sites could be identified (40% retrieval) whereas 16 of the 20 Stiletto injection sites were identified (80%). Within these areas successful transfection was observed (12.2 +/- 4.0 beta-Gal+ cells/high-power field [HPF] in the Ni-SS group vs. 30.1 +/- 6.8 beta-Gal+ cells/HPF in the Stiletto group; p = 0.03). After epicardial delivery to distinct areas of the myocardium adenoviral delivery as assayed by beta-galactosidase protein activity was >21 +/- 16-fold (range, 5 to >43-fold) greater than after Stiletto delivery. In conclusion, this study highlights the importance of adenovirus-material compatibility in gene delivery to the myocardium. Efficiency was greater when using the catheter designed to enhance biocompatibility.

Polylysine as a vehicle for extracellular matrix-targeted local drug delivery, providing high accumulation and long-term retention within the vascular wall

We present the first steps in the elaboration of an approach of extracellular matrix-targeted local drug delivery (ECM-LDD), designed to provide a high concentration, ubiquitous distribution, and long-term retention of a drug within the vessel wall after local intravascular delivery. The approach is based on the concept of a bifunctional drug comprising a "therapeutic effector" and an "affinity vehicle," which should bind to an abundant component of the vessel wall. The aim of the present study was to select molecules suitable for the role of affinity vehicles for ECM-LDD and to study their intravascular delivery and retention ex vivo and in an animal model. By use of fluorescence microscopy, the following molecules were selected on the basis of strong binding to cross sections of human vessels: protamine, polylysine, polyarginine, a glycosaminoglycan-binding peptide from vitronectin, and a synthetic dendrimer. With polylysine as a prototypic affinity vehicle, we showed that after intravascular delivery, polylysine was concentrated throughout a luminal layer of the vascular wall to an extremely high concentration of 20 g/L and was retained therein for at least 72 hours of perfusion without noticeable losses. Low molecular weight (fluorescein) and high molecular weight (hirudin) compounds could be chemically conjugated to polylysine and were retained in the vessel wall after intravascular delivery of the conjugates. In conclusion, by use of the ECM-LDD method, an extremely high concentration and long-term retention of locally delivered drug can be reached. Polycationic molecules can be considered as potential affinity vehicles for ECM-LDD.