ProCol vascular bioprosthesis for vascular access: midterm results

Strategies to counteract adverse remodeling of vascular graft: A 3D view of current graft innovations

Vascular grafts are widely used for vascular surgeries, to bypass a diseased artery or function as a vascular access for hemodialysis. Bioengineered or tissue-engineered vascular grafts have long been envisioned to take the place of bioinert synthetic grafts and even vein grafts under certain clinical circumstances. However, host responses to a graft device induce adverse remodeling, to varied degrees depending on the graft property and host's developmental and health conditions. This in turn leads to invention or failure. Herein, we have mapped out the relationship between the design constraints and outcomes for vascular grafts, by analyzing impairment factors involved in the adverse graft remodeling. Strategies to tackle these impairment factors and counteract adverse healing are then summarized by outlining the research landscape of graft innovations in three dimensions-cell technology, scaffold technology and graft translation. Such a comprehensive view of cell and scaffold technological innovations in the translational context may benefit the future advancements in vascular grafts. From this perspective, we conclude the review with recommendations for future design endeavors.

Small Diameter Xenogeneic Extracellular Matrix Scaffolds for Vascular Applications

Currently, despite the success of percutaneous coronary intervention (PCI), coronary artery bypass graft (CABG) remains among the most commonly performed cardiac surgical procedures in the United States. Unfortunately, the use of autologous grafts in CABG presents a major clinical challenge as complications due to autologous vessel harvest and limited vessel availability pose a significant setback in the success rate of CABG surgeries. Acellular extracellular matrix (ECM) scaffolds derived from xenogeneic vascular tissues have the potential to overcome these challenges, as they offer unlimited availability and sufficient length to serve as "off-the-shelf" CABGs. Unfortunately, regardless of numerous efforts to produce a fully functional small diameter xenogeneic ECM scaffold, the combination of factors required to overcome all failure mechanisms in a single graft remains elusive. This article covers the major failure mechanisms of current xenogeneic small diameter vessel ECM scaffolds, and reviews the recent advances in the field to overcome these failure mechanisms and ultimately develop a small diameter ECM xenogeneic scaffold for CABG. Impact Statement Currently, the use of autologous vessel in coronary artery bypass graft (CABG) is common practice. However, the use of autologous tissue poses significant complications due to tissue harvest and limited availability. Developing an alternative vessel for use in CABG can potentially increase the success rate of CABG surgery by eliminating complications related to the use of autologous vessel. However, this development has been hindered by an array of failure mechanisms that currently have not been overcome. This article describes the currently identified failure mechanisms of small diameter vascular xenogeneic extracellular matrix scaffolds and reviews current research targeted to overcoming these failure mechanisms toward ensuring long-term graft patency.

Current Strategies for the Manufacture of Small Size Tissue Engineering Vascular Grafts

Occlusive arterial disease, including coronary heart disease (CHD) and peripheral arterial disease (PAD), is the main cause of death, with an annual mortality incidence predicted to rise to 23.3 million worldwide by 2030. Current revascularization techniques consist of angioplasty, placement of a stent, or surgical bypass grafting. Autologous vessels, such as the saphenous vein and internal thoracic artery, represent the gold standard grafts for small-diameter vessels. However, they require invasive harvesting and are often unavailable. Synthetic vascular grafts represent an alternative to autologous vessels. These grafts have shown satisfactory long-term results for replacement of large- and medium-diameter arteries, such as the carotid or common femoral artery, but have poor patency rates when applied to small-diameter vessels, such as coronary arteries and arteries below the knee. Considering the limitations of current vascular bypass conduits, a tissue-engineered vascular graft (TEVG) with the ability to grow, remodel, and repair in vivo presents a potential solution for the future of vascular surgery. Here, we review the different methods that research groups have been investigating to create TEVGs in the last decades. We focus on the techniques employed in the manufacturing process of the grafts and categorize the approaches as scaffold-based (synthetic, natural, or hybrid) or self-assembled (cell-sheet, microtissue aggregation and bioprinting). Moreover, we highlight the attempts made so far to translate this new strategy from the bench to the bedside.

Use of Bovine Mesenteric Vein in Rescue Vascular Access Surgery

We describe a technique for rescue surgery of autologous arterovenous fistula (AVF), using Bovine Mesenteric Vein (BMV), which may be used in patients with autologous AVF malfunction caused by steno-occlusion on the arterial side or by fibrosis of the first portion of the vein. To preserve the autologous AVF, we replaced the diseased portion of the artery, or the first centimeters of the vein, by a segment of BMV, with the aim of saving the patency and functionality of the access. We used this technique in 16 cases. All patients underwent hemodialysis treatment immediately after the procedure. Infection or aneurismal dilatation of the graft in implanted BMV was never observed.

Bioengineered hemodialysis access grafts

There is a need for bioengineered therapies to improve the overall health of the growing and aging world population. Patients with renal failure have a life-long requirement for a durable form of hemodialysis vascular access. In this article, we review the history of tissue engineering as it pertains to bioengineered grafts and vessels for hemodialysis access. Over the years, various strategies have been utilized to develop ideal, humanized vessels for vascular replacement such as fixation of animal or human vessels, cell seeding of synthetic materials, and the synthesis of completely autologous or allogeneic bioengineered vessels. Tissue engineering technologies from two companies have progressed to reach phase 2 and phase 3 clinical trials, but the prospect of newer strategies on the horizon may offer improved manufacturing efficiency, a greater variety of conduit size and length, and reduce the cost to produce.

Clinical results of biologic prosthesis: A systematic review and meta-analysis of comparative studies

Background

Biologic prosthesis (BP) has been reported as a safe alternative to polytetrafluoroethylene (PTFE) in vascular reconstruction. However, efficacy of BP remains controversial. We, therefore, conducted a systematic review to summarize previous available evidences comparing the BP and PTFE in terms of clinical outcomes.

Materials and methods

A literature search of the MEDLINE and Scopus was performed to identify comparative studies reporting outcomes of BP, PTFE, and/or autologous veins graft (VG) in vascular access for hemodialysis or femoropopliteal bypass. The outcome of interest was graft patency. Two reviewers independently extracted data. Meta-analysis with a random-effect model was applied to pool a risk ratio (RR) across studies.

Results

Among 584 articles identified, 11 studies (4 randomized controlled trials (RCT) and 7 cohorts) comprising 2627 patients were eligible for pooling. Seven studies compared BP with PTFE and 3 studies compared PTFE with VG. Among BP vs PTFE, pooling based on 3 RCTs yielded the pooled RR of 1.54 (95% CI: 1.10, 2.16), indicating 54% higher graft patency in VG than PTFE. Adding the 7 cohorts in this pooling yield similar results with the pooled RR of 1.29 (95% CI: 1.15, 1.45). The pooled RR of graft patency for BP vs VG was 0.74 (95% CI, 0.55, 1.00), indicating 26% lower graft patency in BP than VG.

Conclusions

Our first meta-analysis indicated that the biosynthetic prosthesis might be benefit over PTFE by increasing graft patency. An updated meta-analysis or a large scale randomized control trial is required to confirm this benefit.

•

This study summarized the gap of knowledge of clinical outcome when compare with biologic prosthesis and PTFE.

•

This first meta-analysis was shown clearly about results and high performance of study were collected.

•

For the conclusion, high efficacy of alternative treatment was shown, however, further study needed to confirm the results.

Bioengineered human acellular vessels for dialysis access in patients with end-stage renal disease: two phase 2 single-arm trials

BACKGROUND

For patients with end-stage renal disease who are not candidates for fistula, dialysis access grafts are the best option for chronic haemodialysis. However, polytetrafluoroethylene arteriovenous grafts are prone to thrombosis, infection, and intimal hyperplasia at the venous anastomosis. We developed and tested a bioengineered human acellular vessel as a potential solution to these limitations in dialysis access.

METHODS

We did two single-arm phase 2 trials at six centres in the USA and Poland. We enrolled adults with end-stage renal disease. A novel bioengineered human acellular vessel was implanted into the arms of patients for haemodialysis access. Primary endpoints were safety (freedom from immune response or infection, aneurysm, or mechanical failure, and incidence of adverse events), and efficacy as assessed by primary, primary assisted, and secondary patencies at 6 months. All patients were followed up for at least 1 year, or had a censoring event. These trials are registered with ClinicalTrials.gov, NCT01744418 and NCT01840956.

FINDINGS

Human acellular vessels were implanted into 60 patients. Mean follow-up was 16 months (SD 7·6). One vessel became infected during 82 patient-years of follow-up. The vessels had no dilatation and rarely had post-cannulation bleeding. At 6 months, 63% (95% CI 47-72) of patients had primary patency, 73% (57-81) had primary assisted patency, and 97% (85-98) had secondary patency, with most loss of primary patency because of thrombosis. At 12 months, 28% (17-40) had primary patency, 38% (26-51) had primary assisted patency, and 89% (74-93) had secondary patency.

INTERPRETATION

Bioengineered human acellular vessels seem to provide safe and functional haemodialysis access, and warrant further study in randomised controlled trials.

FUNDING

Humacyte and US National Institutes of Health.

Operative and perioperative management of infected arteriovenous grafts

Vascular graft infections are a particularly troublesome complication for dialysis patients, many of whom are in an already immunocompromised state. The objective of this review is to detail the risk factors, etiology, diagnosis, perioperative and operative management of vascular graft infections.

Structural and Functional Properties of Venous Wall: Relationship between Elastin, Collagen, and Smooth Muscle Components and Viscoelastic Properties

The aims of this work were (1) to analyze the viscoelastic behavior of different venous segments and their differences, considering the structural characteristics (elastin, collagen, and smooth muscle content) of the venous wall; (2) to analyze the venous biomechanical behavior by means of the histological characteristics of the veins. Nine healthy male Corriedale sheep were included. One vein was selected from each animal to evaluate its biomechanical properties: (a) anterior vena cava, (b) right jugular vein, and (c) right femoral vein. Each selected vein was instrumented with pressure and diameter sensors. After excision, a small ring-shaped sample was set apart from each segment for histological analysis. The amounts of elastin, collagen and smooth muscle were correlated to calculated biomechanical parameters (high- and low-pressure compliance and viscosity). Conclusions are the following: (1) the viscoelastic behavior of the venous wall varies depending on the vascular territory, and it is associated with the variation of the histological structure. These differences involve muscle (both smooth and striated), elastin, and collagen contents. (2) In addition, the quantity of collagen was negatively correlated with high- and low-pressure compliances, and (3) the smooth muscle content was higher in peripheral veins and is positively correlated with venous wall viscosity.

Neointimal hyperplasia associated with synthetic hemodialysis grafts

Stenosis is a major cause of failure of hemodialysis vascular grafts and is primarily caused by neointimal hyperplasia (NH) at the anastomoses. The objective of this article is to provide a scientific review of the biology underlying this disorder and a critical review of the state-of-the-art investigational preventive strategies in order to stimulate further research in this exciting area. The histology of the NH shows myofibroblasts (that are probably derived from adventitial fibroblasts), extracellular matrices, pro-inflammatory cells including foreign-body giant cells, a variety of growth factors and cytokines, and neovasculature. The contributing factors of the pathogenesis of NH include surgical trauma, bioincompatibility of the synthetic graft, and the various mechanical stresses that result from luminal hypertension and compliance mismatch between the vessel wall and graft. These mechanical stimuli are focal in nature and may have a significant influence on the preferential localization of the NH. Novel mechanical graft designs and local drug delivery strategies show promise in animal models in preventing graft NH development. Successful prevention of graft stenosis would provide a superior alternative to the native fistula as hemodialysis vascular access.