Dynamic shear properties of the temporomandibular joint disc

Unilateral, Alloplastic Temporomandibular Joint Reconstruction, Biomechanically What Happens to the Contralateral Temporomandibular Joint?-A Prospective Cohort Study

PURPOSE

Unilateral alloplastic total temporomandibular joint reconstruction (TMJR) might influence the contralateral side joint function. This study's purpose was to estimate the risk for contralateral TMJR and the jaw function of the contralateral untreated temporomandibular joint (TMJ).

PATIENTS AND METHODS

A prospective cohort study design was used for patients who underwent unilateral alloplastic TMJR. The primary predictor was time after TMJR, and the secondary predictors were pre-TMJR mandibular angle resection, prior ipsilateral TMJ surgeries, and TMJR design (custom, stock). The primary outcome variable was the need for contralateral TMJR. The secondary outcome variables were the results of jaw function-jaw tracking, maximum voluntary clenching, surface electromyography, and pressure pain thresholds (PPT) and patient's quality-of-life (oral health-related quality-of-life [OHrQoL]). Data were collected preoperatively (T0), and 1 year (T1), 2-3 years (T2), and ≥ 4 years postoperatively (T4). Analysis of variance with post hoc Tukey -HSD test and multiple linear regression analysis were used for statistical analysis. P < .05 was considered significant.

RESULTS

Thirty-nine patients were enrolled, 15 males and 24 females, with an average age of 48.9 ± 16.2 years. Two patients (5.1%) required a contralateral TMJR. Contralateral condylar motion, incisal laterotrusion, and protrusion slightly decreased, while incisal opening (P = .003), rotation angle (P = .013), opening deflection, surface electromyography activity, maximum voluntary clenching (P = .01), PPTs, and OHrQoL all increased. Pre-TMJR mandibular angle resection had an impact on PPTs and subjective outcomes and prior ipsilateral TMJ surgeries on the opening rotation angle.

CONCLUSIONS

Based on this study, bilateral TMJR does not appear necessary when the contralateral TMJ is healthy. Unilateral alloplastic TMJR is associated with improved contralateral jaw function and OHrQoL.

Mechanical characterization and viscoelastic model of the ovine temporomandibular joint Disc in indentation, uniaxial tension, and biaxial tension

There have been recent investigations into developing disc replacements and regenerative medicine to treat internal derangements of the temporomandibular joint (TMJ) disc. Previous attempts at disc replacements have faced challenges related in part to a limited understanding of the TMJ's complex mechanical environment. The purpose of this study was to characterize the mechanical behavior of the ovine TMJ disc and to derive viscoelastic constitutive models from the experimental data. Fresh ovine TMJ discs were tested in indentation stress-relaxation tests on the inferior surface, uniaxial tension tests to failure, and dynamic biaxial tensile tests. Results showed an order of magnitude stiffer behavior in tension in the anteroposterior (primary fiber) direction compared to the mediolateral direction. The stiffness in tension was much greater than in compression. Regional comparisons showed greater elastic moduli in indentation in the posterior and anterior bands compared to the central region. A hyper-viscoelastic constitutive model captured the dynamic stress-stretch behavior in both indentation and biaxial tension with good agreement. These data will support ongoing and future computational modeling of local TMJ mechanics, aid in biomaterials identification, and ultimately enhance development of implant designs for TMJ disc replacement.

Alteration of structural and mechanical properties of the temporomandibular joint disc following elastase digestion

The temporomandibular joint disc is a fibrocartilaginous structure, composed of collagen fibers, elastin fibers, and proteoglycans. Despite the crucial role of elastin fibers in load‐bearing properties of connective tissues, its contribution in temporomandibular joint disc biomechanics has been disregarded. This study attempts to characterize the structural–functional contribution of elastin in the temporomandibular joint disc. Using elastase, we selectively perturbed the elastin fiber network in porcine temporomandibular joint discs and investigated the structural, compositional, and mechanical regional changes through: (a) analysis of collagen and elastin fibers by immunolabeling and transmission electron microscopy; (b) quantitative analysis of collagen tortuosity, cell shape, and disc volume; (c) biochemical quantification of collagen, glycosaminoglycan and elastin content; and (d) cyclic compression test. Following elastase treatment, microscopic examination revealed fragmentation of elastin fibers across the temporomandibular joint disc, with a more pronounced effect in the intermediate regions. Also, biochemical analyses of the intermediate regions showed significant depletion of elastin (50%), and substantial decrease in collagen (20%) and glycosaminoglycan (49%) content, likely due to non‐specific activity of elastase. Degradation of elastin fibers affected the homeostatic configuration of the disc, reflected in its significant volume enlargement accompanied by remarkable reduction of collagen tortuosity and cell elongation. Mechanically, elastase treatment nearly doubled the maximal energy dissipation across the intermediate regions while the instantaneous modulus was not significantly affected. We conclude that elastin fibers contribute to the restoration and maintenance of the disc resting shape and actively interact with collagen fibers to provide mechanical resilience to the temporomandibular joint disc.

Viscoelastic properties of the central region of porcine temporomandibular joint disc in shear stress-relaxation

In this study, shear relaxation properties of the porcine temporomandibular joint (TMJ) disc are investigated. Previous studies have shown that, in fatigue failure and damage of cartilage and fibrocartilage, shear loads could be one of the biggest contributors to the failure. The aim of the present study is to develop an evaluation method to study shear properties of the disc and to do a mathematical characterization of it. For the experiments, twelve porcine discs were used. Each disc was dissected from the TMJ and, then, static strain control tests were carried out to obtain the shear relaxation modulus for the central region of the discs. From the results, it was found that the disc presents a viscoelastic behavior under shear loads. Relaxation modulus decreased with time. Shear relaxation was 10% of the instantaneous stress, which implies that the viscous properties of the disc cannot be neglected. The present results lead to a better understanding of the discs mechanical behavior under realistic TMJ working conditions.

Properties of the Temporomandibular Joint in Growing Pigs

A subset of temporomandibular joint (TMJ) disorders are attributed to joint degeneration. The pig has been considered the preferred in-vivo model for the evaluation of potential therapies for TMJ disorders, and practical considerations such as cost and husbandry issues have favored the use of young, skeletally immature animals. However, the effect of growth on the biochemical and biomechanical properties of the TMJ disc and articulating cartilage has not been examined. The present study investigates the effect of age on the biochemical and biomechanical properties of healthy porcine TMJs at 3, 6, and 9 months of age. DNA , hyrdroxyproline, and glycosaminoglycan (GAG) content were determined and the discs and condyles were tested in uniaxial unconfined stress relaxation compression from 10% - 30% strain. TMJ discs were further assessed with a tensile test to failure technique, which included the ability to test multiple samples from the same region of an individual disc to minimize the intra-specimen variation. No differences in biochemical properties for the disc or compressive properties at 30% stress relaxation in the disc and condylar cartilage were found. In tension, no differences were observed for peak stress and tensile modulus. The collagen content of the condyle were higher at 9 months than 3 months (p<0.05), and the GAG content was higher at 9 months than 6 months (p<0.05). There was a trend of increased compressive instantaneous modulus with age. As such, age matched controls for growing pigs are probably appropriate for most parameters measured.

Mechanobehavioral Scores in Women with and without TMJ Disc Displacement

Cartilage fatigue may be a factor in the precocious development of degenerative changes in the temporomandibular joint (TMJ). This cross-sectional study estimated potential for cartilage fatigue via TMJ energy densities (ED) and jaw muscle duty factors (DF), which were combined to calculate mechanobehavioral scores (MBS) in women with (+) and without (-) bilateral TMJ disc displacement (DD). All subjects gave informed consent to participate and were examined using Diagnostic Criteria (DC) for Temporomandibular Disorders (TMD) and magnetic resonance (MR) and computed tomography (CT) images. Forty-seven subjects were categorized into +DD ( n = 29) and -DD ( n = 18) groups. Dynamic stereometry (MR images combined with jaw-tracking data) characterized individual-specific data of TMJ stress-field mechanics to determine ED (ED = W/ Q mJ/mm3, where W = work done, Q = volume of cartilage) during 10 symmetrical jaw-closing cycles with a 20-N mandibular right canine load. Subjects were trained to record masseter and temporalis electromyography over 3 days and 3 nights. Root mean square electromyography/bite-force calibrations determined subject-specific masseter and temporalis muscle activities per 20-N bite-force (T20 N, µV), which defined thresholds. Muscle DF (DF = % duration of muscle activity/total recording time) were determined for a range of thresholds, and MBS (ED2 × DF) were calculated. Intergroup differences in ED, DF, and MBS were assessed via analyses of variance with Bonferroni and Tukey honest significant difference post hoc tests. Average ED for contralateral TMJs was significantly larger ( P = 0.012) by 1.4-fold in +DD compared to -DD subjects. Average DF were significantly larger (all P < 0.01) for +DD compared to -DD subjects by 1.7-, 2.5-, and 1.9-fold for day, night, and overall, respectively. Daytime MBS were significantly larger (all P < 0.04) by up to 8.5-fold in +DD compared to -DD subjects. Significantly larger ED, DF, and MBS were shown in women with compared to women without bilateral TMJ DD.

Biomechanical properties of murine TMJ articular disc and condyle cartilage via AFM-nanoindentation

This study aims to quantify the biomechanical properties of murine temporomandibular joint (TMJ) articular disc and condyle cartilage using AFM-nanoindentation. For skeletally mature, 3-month old mice, the surface of condyle cartilage was found to be significantly stiffer (306±84kPa, mean±95% CI) than those of the superior (85±23kPa) and inferior (45±12kPa) sides of the articular disc. On the disc surface, significant heterogeneity was also detected across multiple anatomical sites, with the posterior end being the stiffest and central region being the softest. Using SEM, this study also found that the surfaces of disc are composed of anteroposteriorly oriented collagen fibers, which are sporadically covered by thinner random fibrils. Such fibrous nature results in both an F-D^3/2 indentation response, which is a typical Hertzian response for soft continuum tissue under a spherical tip, and a linear F-D response, which is typical for fibrous tissues, further signifying the high degree of tissue heterogeneity. In comparison, the surface of condyle cartilage is dominated by thinner, randomly oriented collagen fibrils, leading to Hertzian-dominated indentation responses. As the first biomechanical study of murine TMJ, this work will provide a basis for future investigations of TMJ tissue development and osteoarthritis in various murine TMJ models.

Consequences of Viscoelastic Behavior in the Human Temporomandibular Joint Disc

The consequences of the viscoelastic behavior of the temporomandibular joint disc were analyzed in simulated jaw open-close cycles. It was hypothesized that viscoelasticity helps protect the underlying bone, while augmenting the smoothness of articular movements. Simulations were performed with a dynamic model of the masticatory system, incorporating the joints’ cartilaginous structures as Finite Element Models. A non-linear viscoelastic material model was applied for the disc. The apparent stiffness of the disc to principal stress was largest when the jaw was closed, whereas, with the Von Mises’ stress, it appeared largest when the jaw was open. The apparent stiffnesses appeared to be dependent on both the speed of the movements and the presence of a resistance between the teeth. It was concluded that the disc becomes stiffer when load concentrations can be expected. During continued cyclic motion, it softens, which favors smoothness of joint movement at the cost of damage prevention.

The Frictional Coefficient of the Temporomandibular Joint and Its Dependency on the Magnitude and Duration of Joint Loading

In synovial joints, friction between articular surfaces leads to shear stress within the cartilaginous tissue, which might result in tissue rupture and failure. Joint friction depends on synovial lubrication of the articular surfaces, which can be altered due to compressive loading. Therefore, we hypothesized that the frictional coefficient of the temporomandibular joint (TMJ) is affected by the magnitude and duration of loading. We tested this by measuring the frictional coefficient in 20 intact porcine TMJs using a pendulum-type friction tester. The mean frictional coefficient was 0.0145 (SD 0.0027) after a constant loading of 50 N during 5 sec. The frictional coefficient increased with the length of the preceding loading duration and exceeded 0.0220 (SD 0.0014) after 1 hr. Application of larger loading (80 N) resulted in significantly larger frictional coefficients. In conclusion, the frictional coefficient in the TMJ was proportional to the magnitude and duration of joint loading.

Shear Properties of the Temporomandibular Joint Disc in Relation to Compressive and Shear Strain

Shear stress can result in fatigue, damage, and irreversible deformation of the temporomandibular joint disc. Insight into the dynamic shear properties of the disc may give insight into the mechanism inducing tissue failure due to shear. We tested the hypothesis that the dynamic shear properties of the disc depend on the amount of shear and compressive strain. Twenty-four porcine discs were used for dynamic shear tests. The specimens were clamped between the plates of a loading apparatus under compressive strains of 5%, 10%, and 15%. Dynamic shear was applied to the specimen by a sinusoidal strain of, respectively, 0.5%, 1.0%, and 1.5%. Both the dynamic elasticity and viscosity were proportional to compressive strain and inversely proportional to shear strain. These shear characteristics suggest a significant role of compressive and shear strain on the internal friction of the disc.

Viscoelastic shear properties of porcine temporomandibular joint disc

OBJECTIVES

To investigate the intrinsic viscoelastic shear properties in porcine TMJ discs.

MATERIALS AND METHODS

Twelve fresh porcine TMJ discs from young adult pigs (6-8 months) were used. Cylindrical samples (5 mm diameter) with uniform thickness (~1.2 mm) were prepared from five regions of the TMJ disc. Torsional shear tests were performed under 10% compressive strain. Dynamic shear was applied in two methods: 1) a frequency sweep test over the frequency range of 0.1-10 rad/s with a constant shear strain amplitude of 0.05 rad and 2) a strain sweep test over the range of 0.005-0.15 rad at a constant frequency of 10 rad/s. Transient stress relaxation tests were also performed to determine the equilibrium shear properties.

RESULTS

As the frequency increased in the frequency sweep test, the dynamic shear complex modulus increased, with values ranging from 7 to 17 kPa. The phase angle, ranging from 11 to 15 degrees, displayed no pattern of regional variation as the frequency increased. The dynamic shear modulus decreased as the shear strain increased. The equilibrium shear modulus had values ranging from 2.6 to 4 kPa. The posterior region had significantly higher values for dynamic shear modulus than those in the anterior region, while no significant regional difference was found for equilibrium shear modulus.

CONCLUSION

Our results suggest that the intrinsic region-dependent viscoelastic shear characteristics of TMJ disc may play a crucial role in determining the local strain of the TMJ disc under mechanical loading.

Current status of temporomandibular joint disorders and the therapeutic system derived from a series of biomechanical, histological, and biochemical studies

This article was designed to report the current status of temporomandibular joint disorders (TMDs) and the therapeutic system on the basis of a series of clinical, biomechanical, histological and biochemical studies in our research groups. In particular, we have focused on the association of degenerative changes of articular cartilage in the mandibular condyle and the resultant progressive condylar resorption with mechanical stimuli acting on the condyle during the stomatognathic function. In a clinical aspect, the nature and prevalence of TMDs, association of malocclusion with TMDs, association of condylar position with TMDs, association of craniofacial morphology with TMDs, and influences of TMDs, TMJ-osteoarthritis (TMJ-OA) in particular, were examined. In a biomechanical aspect, the nature of stress distribution in the TMJ from maximum clenching was analyzed with finite element method. In addition, the pattern of stress distribution was examined in association with varying vertical discrepancies of the craniofacial skeleton and friction between the articular disk and condyle. The results demonstrated an induction of large compressive stresses in the anterior and lateral areas on the condyle by the maximum clenching and the subsequent prominent increases in the same areas of the mandibular condyle as the vertical skeletal discrepancy became more prominent. Increase of friction at the articular surface was also indicated as a cause of larger stresses and the relevant disk displacement, which further induced an increase in stresses in the tissues posterior to the disks, indicating an important role of TMJ disks as a stress absorber. In a histological or biological aspect, increase in TMJ loading simulated by vertical skeletal discrepancy, which has already been revealed by the preceding finite element analysis or represented by excessive mouth opening, produced a decrease in the thickness of cartilage layers, an increase in the numbers of chondroblasts and osteoclasts and the subsequent degenerative changes in the condylar cartilage associated with the expression of bone resorption-related factors. In a biochemical or molecular and cellular aspect, excessive mechanical stimuli, irrespective of compressive or tensile stress, induced HA fragmentation, expression of proinflammatory cytokines, an imbalance between matrix metalloproteinases and the tissue inhibitors, all of which are assumed to induce lower resistance to external stimuli and degenerative changes leading to bone and cartilage resorption. Excessive mechanical stimuli also reduced the synthesis of superficial zone protein in chondrocytes, which exerts an important role in the protection of cartilage and bone layers from the degenerative changes. It is also revealed that various cytoskeletal changes induced by mechanical stimuli are transmitted through a stretch-activated or Ca2+channel. Finally, on the basis of the results from a series of studies, it is demonstrated that optimal intra-articular environment can be achieved by splint therapy, if indicated, followed by occlusal reconstruction with orthodontic approach in patients with myalgia of the masticatory muscles, and TMJ internal derangement or anterior disk displacement with or without reduction. It is thus shown that orthodontic treatment is available for the treatment of TMDs and the long-term stability after treatment.

Dynamic compressive properties of articular cartilages in the porcine temporomandibular joint

The mandibular condylar and temporal cartilages in the temporomandibular joint (TMJ) play an important role as a stress absorber during function. However, relatively little information is available on its viscoelastic properties in dynamic compression, particularly in a physiological range of frequencies. We hypothesized that these properties are region-specific and depend on loading frequency. To characterize the viscoelastic properties of both cartilages, we performed dynamic indentation tests over a wide range of loading frequencies. Nine porcine TMJs were used; the articular surface was divided into five regions: anterior; central; posterior; medial and lateral. Sinusoidal compressive strain was applied with an amplitude of 1.0% and a frequency range between 0.01 and 10 Hz. In both cartilages, the dynamic storage modulus increased with frequency, and the value was the highest in the lateral region. These values of E' in the temporal cartilage were smaller than those in the mandibular condylar cartilage in all five regions except the lateral region. The Loss tangent values were higher in the temporal cartilage (0.35-0.65) than in the mandibular condylar one (0.2-0.45), which means that the temporal cartilage presents higher viscosity. The present results suggest that the dynamic compressive moduli in both cartilages are region-specific and dependent on the loading frequency, which might have important implications for the transmission of load in the TMJ.

Shear mechanics of the TMJ disc: relationship to common clinical observations

The temporomandibular joint (TMJ) is a complex hinge and gliding joint that induces significant shear loads onto the fibrocartilage TMJ disc during jaw motion. The purpose of this study was to assess regional variation in the disc's shear loading characteristics under physiologically relevant loads and to associate those mechanical findings with common clinical observations of disc fatigue and damage. Porcine TMJ discs were compressed between an axially translating bottom platen and a 2.5-cm-diameter indenter within a hydrated testing chamber. Discs were cyclically sheared at 0.5, 1, or 5 Hz to 1, 3, or 5% shear strain. Within the anterior and intermediate regions of the disc when sheared in the anteroposterior direction, both shear and compressive moduli experienced a significant decrease from instantaneous to steady state, while the posterior region's compressive modulus decreased approximately 5%, and no significant loss of shear modulus was noted. All regions retained their shear modulus within 0.5% of instantaneous values when shear was applied in the mediolateral direction. The results of the disc's regional shear mechanics suggest an observable and predictable link with the common clinical observation that the posterior region of the disc is most often the zone in which fatigue occurs, which may lead to disc damage and perforation.

Biomechanical analysis of the influence of friction in jaw joint disorders

OBJECTIVE

Increased friction due to impaired lubrication in the jaw joint has been considered as one of the possible causes for internal joint disorders. A very common internal disorder in the jaw joint is an anteriorly dislocated articular disc. This is generally considered to contribute to the onset of arthritic injuries. Increase of friction as caused by impairment of lubrication is suspected to be a possible cause for such a disorder.

METHOD

The influence of friction was addressed by analysis of its effects on tensions and deformations of the cartilaginous structures in the jaw joint using computational biomechanical analysis. Jaw open-close movements were simulated while in one or two compartments of the right joint friction was applied in the articular contact. The left joint was treated as the healthy control.

RESULTS

The simulations predicted that friction primarily causes increased shear stress in the articular cartilage layers, but hardly in the articular disc.

CONCLUSIONS

This suggests that impaired lubrication may facilitate deterioration of the cartilage-subchondral bone unit of the articular surfaces. The results further suggest that increased friction is not a plausible cause for turning a normally functioning articular disc into an anteriorly dislocated one.

Regional Dynamic Tensile Properties of the TMJ Disc

Although the TMJ disc has been well-characterized under tension and compression, dynamic viscoelastic regional and directional variations have heretofore not been investigated. We hypothesized that the intermediate zone under mediolateral tension would exhibit lower dynamic moduli compared with the other regions of the disc under either mediolateral or anteroposterior tension. Specimens were prepared from porcine discs (3 regions/direction), and dynamic tensile sweeps were performed at 1% strain over a frequency range of 0.1 to 100 rad/sec. Generally, the intermediate zone possessed the lowest storage and loss moduli, and the highest loss tangent. This study further accentuates the known distinct character of the intermediate zone by showing for the first time that these differences also extend to dynamic behavior, perhaps implicating the TMJ disc as a structure primarily exposed to predominantly anteroposterior tension via anterior and posterior attachments, with a need for great distension mediolaterally across the intermediate zone.

Degenerative Disorders of the Temporomandibular Joint: Etiology, Diagnosis, and Treatment

Temporomandibular joint (TMJ) disorders have complex and sometimes controversial etiologies. Also, under similar circumstances, one person’s TMJ may appear to deteriorate, while another’s does not. However, once degenerative changes start in the TMJ, this pathology can be crippling, leading to a variety of morphological and functional deformities. Primarily, TMJ disorders have a non-inflammatory origin. The pathological process is characterized by deterioration and abrasion of articular cartilage and local thickening. These changes are accompanied by the superimposition of secondary inflammatory changes. Therefore, appreciating the pathophysiology of the TMJ degenerative disorders is important to an understanding of the etiology, diagnosis, and treatment of internal derangement and osteoarthrosis of the TMJ. The degenerative changes in the TMJ are believed to result from dysfunctional remodeling, due to a decreased host-adaptive capacity of the articulating surfaces and/or functional overloading of the joint that exceeds the normal adaptive capacity. This paper reviews etiologies that involve biomechanical and biochemical factors associated with functional overloading of the joint and the clinical, radiographic, and biochemical findings important in the diagnosis of TMJ-osteoarthrosis. In addition, non-invasive and invasive modalities utilized in TMJ-osteoarthrosis management, and the possibility of tissue engineering, are discussed.

Biomechanical response of condylar cartilage-on-bone to dynamic shear

Shear stress can result in fatigue, damage, and irreversible deformation of the mandibular condylar cartilage. However, little information is available on its dynamic properties in shear. We tested the hypothesis that the dynamic shear properties of the condylar cartilage depend on the frequency and amplitude of shear strain. Ten porcine mandibular condyles were used for dynamic shear tests. Two cartilage-bone plugs were dissected from each condyle and tested in a simple shear sandwich configuration under a compressive strain of 10%. Sinusoidal shear strain was applied with an amplitude of 1.0, 2.0, and 3.0% and a frequency range between 0.01 and 10 Hz. The magnitudes of the shear dynamic moduli were found to be dependent on the frequency and the shear strain amplitude. They increased with shear strain. tan delta ranged from 0.2 to 0.4, which means that the cartilage is primarily elastic in nature and has a small but not negligible viscosity. In conclusion, the present results show that the shear behavior of the mandibular condylar cartilage is dependent on the frequency and amplitude of the applied shear strain. The observed shear characteristics suggest a significant role of shear strain on the interstitial fluid flow within the cartilage.

Lubrication of the temporomandibular joint

Although tissue engineering of the temporomandibular joint (TMJ) structures is in its infancy, tissue engineering provides the revolutionary possibility for treatment of temporomandibular disorders (TMDs). Recently, several reviews have provided a summary of knowledge of TMJ structure and function at the biochemical, cellular, or mechanical level for tissue engineering of mandibular cartilage, bone and the TMJ disc. As the TMJ enables large relative movements, joint lubrication can be considered of great importance for an understanding of the dynamics of the TMJ. The tribological characteristics of the TMJ are essential for reconstruction and tissue engineering of the joint. The purpose of this review is to provide a summary of advances relevant to the tribological characteristics of the TMJ and to serve as a reference for future research in this field. This review consists of four parts. Part 1 is a brief review of the anatomy and function of the TMJ articular components. In Part 2, the biomechanical and biochemical factors associated with joint lubrication are described: the articular surface topology with microscopic surface roughness and the biomechanical loading during jaw movements. Part 3 includes lubrication theories and possible mechanisms for breakdown of joint lubrication. Finally, in Part 4, the requirement and possibility of tissue engineering for treatment of TMDs with degenerative changes as a future treatment regimen will be discussed in a tribological context.

Effect of Hyperactivity of the Lateral Pterygoid Muscle on the Temporomandibular Joint Disk

In this study, the effect of hyperactivity of the lateral pterygoid muscle (LPM) on the temporomandibular joint (TMJ) disk during prolonged clenching was examined with a mathematical model. Finite element models of the TMJ were constructed based on magnetic resonance images from two subjects with or without internal derangement of the TMJ. For each model, muscle forces were used as a loading condition for stress analysis for 10 min clenching. Furthermore, an intermittent increase of the LPM force with intervals of 1 min was applied. In the asymptomatic model, large stresses were found in the central and lateral part of the disk at the onset of clenching. In the retrodiscal tissue, stress relaxation occurred during the first 2 min of clenching. When the force of the LPM increased temporarily, the disk moved anteriorly and returned to its original position afterward. In the symptomatic model, large stresses were observed in both the posterior region of the disk and the retrodiscal tissue throughout clenching. Upon temporary increase of the LPM force, the disk was elongated anteriorly, which appeared to be irreversible. These results indicate that hyperactivity of the LPM may be involved in the progression of disk displacement.

Viscoelastic material model for the temporomandibular joint disc derived from dynamic shear tests or strain-relaxation tests

Viscoelastic material models for the temporomandibular joint disc, based upon strain relaxation, were considered to underestimate energy absorption for loads with time constants beyond the relaxation time. Therefore, the applicability of a material model that takes the viscous behavior at a wide range of frequencies into account was assessed. To that purpose a non-linear multi-mode Maxwell model was tested in cyclic large-strain compression tests. Its material constants were approximated from dynamic small-strain shear deformation tests. The storage and loss moduli as obtained from a disc sample could be approximated with a four-mode Maxwell model. In simulated large-strain compression tests it behaved similarly as observed from the experimental tests. The underestimation of energy dissipation, as obtained from a single-mode Maxwell model was considerably reduced, especially for deformations with a higher strain rate. Furthermore, in contrast to the latter it was able to predict the increase of the stress amplitude with the compression frequency much better. In conclusion, the applied four-mode Maxwell model, based upon dynamic shear tests, was considered more suitable to predict higher frequency viscoelastic response, for instance during shock absorption, than a model based upon strain-relaxation.

Dynamic shear properties of the porcine molar periodontal ligament

The role of the periodontal ligament (PDL) is to support the tooth during function and resist external forces applied to it. The dominant vertical component of these forces is associated with shear in the PDL. Little information, however, is available on the dynamic behavior of the PDL in shear. Therefore, the present study was designed to determine the dynamic shear properties of the PDL in the porcine molar (n=10). From dissected mandibles transverse sections of the mesial root of the first molar were obtained at the apical and coronal levels and used for dynamic shear tests. Shear strain (0.5%, 1.0%, and 1.5%) was applied in superoinferior direction parallel to the root axis with a wide range of frequencies (0.01-100 Hz). The dynamic complex and storage moduli increased significantly with the loading frequency, the dynamic loss modulus showed only a small increase. The dynamic elasticity was significantly larger in the coronal region than in the apical region although the dynamic viscosity was similar in both regions. The present results suggest that non-linearities, compression/shear coupling, and intrinsic viscoelasticity affect the shear material behavior of the PDL, which might have important implications for load transmission from tooth to bone and vice versa.

Comparison of dynamic shear properties of the porcine molar and incisor periodontal ligament

The role of the periodontal ligament (PDL) is to support the tooth during function and resist external forces applied to it. The dominant vertical component of these forces is associated with shear in the PDL. The mechanical response to vertical force may, however, be different between the molar and incisor as their loading regimen is different. The present study was designed to determine the viscoelastic behavior in shear of the PDL of the porcine molar and incisor (n = 10 for each). From dissected mandibles transverse sections including the mesial root of first molar and the incisal root were obtained and used for dynamic shear tests. Shear strain of 1.0% was applied in superoinferior direction parallel to the root axis with a wide range of frequencies (0.01-100 Hz). The viscoelastic behavior was characterized by the storage and loss modulus and loss tangent as a function of the frequency. For the incisor and molar, the complex and storage moduli increased significantly with the frequency. For the incisor, the loss modulus also increased with the frequency. The loss modulus and loss tangent were significantly (p < 0.05) larger in the incisor than in the molar. The present results suggest that the incisal PDL revealed more viscous behavior during dynamic shear than the molar one, which might have important implications for the principal role of the anterior teeth such as PDL sensation.

Biomechanical responses of human temporomandibular joint disc under tension and compression

The purpose of this study was to observe the microscopic changes in the temporomandibular joint (TMJ) disc in response to tension and compression, and to study the mechanism of disc failure when subjected to mechanical stresses. The scanning electron microscope was used to observe topographic characteristics of TMJ disc samples obtained from 13 cadavers before and during biomechanical experiments. The stress relaxation experiments were conducted at different strain levels (2, 3, 4 and 6%). The uniaxial tensile experiments were carried out at a constant strain rate (0.05 mm/s). The confined compression tests were performed with 3 different indenters (2, 3 and 4mm in diameter) for 150 s and 3 h. The maximal tensile strain of the disc was 5% (nearly equal to 0.22 MPa of tensile stress) in the mediolaterally tensile direction. Typical wavelike structure of the collagen fibrils of the disc was present at 2-4% strain ranges. Tensile and shear damage to local collagen fibrils was observed in specimens of the intermediate zone and the posterior band at 6% strain level. Changes in the collagen network from a wavelike structure to distortion observed on the surface of the testing samples were reversible in the 150-s indentation, but severe, irreversible breakdown and deformation of the collagen-proteoglycan network occurred in those specimens that had been compressed for 3h. Persistent and prolonged compression inevitably resulted in irrecoverable disc failure. Mechanical stress is a crucial factor in breakdown of the TMJ disc.

Tissue Engineering of the TMJ disc: a review

The potential impact of a tissue-engineered temporomandibular joint (TMJ) disc is immense. Currently, patients suffering from a severely dysfunctional TMJ have few options. Facing the general lack of safe, effective TMJ disc implants, many patients undergo discectomy, a procedure that removes the injured TMJ disc in hopes of reducing debilitating symptoms associated with severe TMJ disorders. This procedure may not be ideal as the TMJ is left without an important functional component. Tissue engineering is a promising approach for the creation of viable, effective implants. The first attempt to investigate TMJ disc cells on a biomaterial was conducted in 1991. The first TMJ tissue-engineered constructs to be tested biochemically and biomechanically were formed in 1994; however, in examining this study in retrospect, it is clear how little TMJ knowledge was available at that time. Within the last 10 to 15 years, multiple studies have investigated critical TMJ disc characteristics, and while this characterization is not complete, these data have created a solid foundation for tissue-engineering research. Thus, the last 5 years have yielded core studies investigating the principal elements of tissue engineering: scaffold, cell source, and biological/biomechanical stimuli. Although TMJ disc tissue engineering is still in its formative years, its future is quite promising. Key studies are now being conducted that will assist in the establishment of a solid TMJ disc tissue-engineering approach. As the challenges of tissue engineering are faced and met, the ultimate goal of creating a functional biological implant nears.

Fracture toughness estimation for the TMJ disc

J contour integral fracture toughness of the temporomandibular (TMJ) disc was estimated from a computational model based on fracture load data derived from experimental tests. The computational model involved a stress analysis of TMJ disc specimens with cracks oriented parallel and perpendicular to the primary collagen fiber axis within the intermediate zone of the disc. The results demonstrated differences occurred between crack orientations when an orthotropic model was used. Fracture toughness was much lower for a crack oriented parallel to the collagen fiber direction than that for a crack oriented perpendicularly. Thickness, crack size, and anisotropy ratio were observed as additional variables affecting the fracture toughness of the TMJ disc. Future model enhancements may be achieved by considering the poroviscoelastic nature of the TMJ disc.

Influence of additive hyaluronic acid on the lubricating ability in the temporomandibular joint

In synovial fluid, hyaluronic acid (HA) is an essential component for the lubrication of joints, thus preventing friction. The relationship between HA and joint friction is not unambiguously established yet. In the present study, the effect of the application of HA on the frictional coefficient in the temporomandibular joint was evaluated. After measuring the frictional coefficient in intact porcine joints (n = 10), the subsequent effect of phosphate-buffered saline (PBS) washing and gauze scouring and the application of HA was examined. Compared with the intact joint, the frictional coefficient was significantly larger after PBS washing and gauze scouring. Subsequent application of HA resulted in a significant decrease (50-75%) of the frictional coefficient. However, it did not recover to the same value as in the intact joints. Observations by scanning electron microscopy showed that after PBS washing, the amorphous layer of the articular cartilage was still intact, whereas it was partially collapsed after gauze scouring. In conclusion, the addition of HA did reduce the coefficient of friction under the experimental conditions in this study; the relevance to the clinical condition and the duration of the treatment effect in vivo require further investigation.