A new aspiration device equipped with a hydro-separator for acute ischemic stroke due to challenging soft and stiff clots

Water content for clot composition prediction in acute ischemic stroke

BACKGROUND

Mechanical thrombectomy (MT) has become the gold standard care for treating acute ischemic stroke (AIS) due to large vessel occlusion. Emerging evidence suggests that understanding the composition of clots prior to intervention could be useful for the selection of neuroendovascular techniques, potentially improving the efficacy of treatments. However, current imaging modalities lack the ability to distinguish clot composition accurately and reliably. Since water content can influence signal intensity on CT and MRI scans, its assessment may provide indirect clues about clot composition. This study aimed to elucidate the correlation between water content and clot composition using human clots retrieved from stroke patients and experimentally generated ovine clots.

MATERIALS AND METHODS

This study involved an analysis of ten clots retrieved from patients with AIS undergoing MT. Additionally, we created ten red blood cells (RBC)-rich and ten fibrin-rich ovine blood clots, which were placed in a human intracranial vascular model under realistic flow conditions. The water content and compositions of these clots were evaluated, and linear regression analyses were performed to determine the relationship between clot composition and water content.

RESULTS

The regression analysis in human stroke clots revealed a significant negative association between RBC concentration and water content. We also observed a positive correlation between water content and both fibrin and platelets in ovine blood clots. Conclusion.

Fabrication of Shape Memory Polymer Endovascular Thrombectomy Device for Treating Ischemic Stroke

Stroke is the second result for death and ischemic stroke constitutes most of all stroke cases. Ischemic stroke takes place when blood clot or embolus blocks cerebral vessel and interrupts blood flow, which often leads to brain damage, permanent disability, or death. There is a 4.5-h (golden hour) treatment window to restore blood flow prior to permanent neurological impairment results. Current stroke treatments consist mechanical system or thrombolytic drug therapy to disrupt or dissolve thrombus. Promising method for stroke treatment is mechanical retrieving of thrombi employing device deployed endovascularly. Advent of smart materials has led to research fabrication of several minimally invasive endovascular devices that take advantage of new materials capabilities. One of these capabilities is shape memory, is capability of material to store temporary form, then activate to primary shape as subjected to stimuli. Shape memory polymers (SMPs) are employed as good materials for thrombectomy device fabrication. Therefore, current review presents thrombectomy device development and fabrication with SMPs. Design, performance, limitations, and in vitro or in vivo clinical results of SMP-based thrombectomy devices are identified. Review also sheds light on SMP's future outlook and recommendations for thrombectomy device application, opening a new era for advanced materials in materials science.

Dynamic Perviousness Predicts Revascularization Success in Acute Ischemic Stroke

BACKGROUND

The predictive value of thrombus perviousness in acute ischemic stroke (AIS), as measured by computed tomography (CT), has been intensively studied with conflicting results. In this study, we investigate the predictive potential of the novel concept of dynamic perviousness using three-dimensional (3D) volumetric evaluation of occlusive thrombi.

METHODS

The full thrombus volume in 65 patients with a hyperdense artery sign on non-contrast CT (NCCT), who underwent mechanical thrombectomy (MT), was segmented. Perviousness maps were computed voxel-wise for the entire thrombus volume as thrombus attenuation increase (TAI) between NCCT and CT angiography (CTA) as well as between CTA and late venous phase CT (CTV). Perviousness was analyzed for its association with NIHSS at admission, Thrombolysis In Cerebral Infarction (TICI) score, and number of MT passes.

RESULTS

The mean late-uptake TAI of thrombi with NIHSS scores greater than 21 at admission was approximately 100% higher than for lower scored NIHSS (p between 0.05 and 0.005). Concerning revascularization results, thrombi requiring less than four MT passes had ca. 80% higher group mean late-uptake TAI than clots requiring four or more passes (p = 0.03), and thrombi with TICI score III had ca. 95% higher group mean late-uptake TAI than thrombi with TICI II (p = 0.03). Standard perviousness showed no significant correlation with MT results.

CONCLUSION

Standard thrombus perviousness of 3D clot volume is not associated with revascularization results in AIS. In contrast, dynamic perviousness assessed with a voxel-wise characterization of 3D thrombi volume may be a better predictor of MT outcomes than standard perviousness.

Experimental evaluation of the plunger technique: A method of cyclic manual aspiration thrombectomy for treatment of acute ischemic stroke

BACKGROUND

Mechanical thrombectomy via direct aspiration is a rapid treatment for acute ischemic stroke. This method often results in the partial ingestion of the clot or "corking" of the catheter tip. Cyclic aspiration may take advantage of the mechanical properties of the clot, resulting in greater clot ingestion and overall procedure success.

METHODS

An in vitro analysis was performed comparing static and cyclic (plunger technique) aspiration. Embolus analogs were used to create occlusions in a mock circulatory flow loop, and one aspiration attempt (first pass effect) using either a static or plunger technique was performed. The percent ingestion of each embolus analog was recorded for each trial.

RESULTS

Static aspiration for 0% and 50% hematocrit embolus analogs resulted in ingestions of 12.8 ± 4.6% and 15.1 ± 10.0%, respectively, while plunger technique (cyclic) aspiration resulted in 15.8 ± 7.3% and 34.4 ± 19.5% ingestion. Complete ingestion was observed only with 50% hematocrit analogs, occurring in 30% of plunger and 10% of static cases. Statistical differences were determined between the two aspiration techniques for the 50% hematocrit samples, with the plunger technique yielding significantly more ingestion. In addition, the plunger technique was shown to maintain a negative vacuum pressure throughout the duration of cyclic plunging.

CONCLUSIONS

The plunger technique for manual cyclic aspiration resulted in higher rates of complete ingestion and greater average % ingestions when compared to static aspiration. Increased clot ingestion can result in a higher rate of complete reperfusion during the first aspiration attempt, maximizing the number of patients with good clinical outcomes.

Devices and Techniques

This extensive review explores the intricacies of the three principal mechanical thrombectomy techniques: the stent retriever technique, contact aspiration technique, and a combined approach, and their application in managing acute ischemic stroke. Each technique operates uniquely on the thrombus, leading to differences in their efficacy. Factors including clot size, clot stiffness, vessel tortuosity, and the angle of interaction between the aspiration catheter and the clot significantly influence these differences. Clinical trials and meta-analyses have shown the overall equivalency of these techniques for the treatments of large vessel occlusion and distal medium vessel occlusions. However, there are nuanced differences that emerge under specific clinical circumstances, highlighting the absence of a one-size-fits-all strategy in acute ischemic stroke management. We emphasize the need for future investigations to elucidate these nuances further, aiming to refine procedural strategies and individualize patient care for optimal outcomes.

Engineering a highly elastic bioadhesive for sealing soft and dynamic tissues

Injured tissues often require immediate closure to restore the normal functionality of the organ. In most cases, injuries are associated with trauma or various physical surgeries where different adhesive hydrogel materials are applied to close the wounds. However, these materials are typically toxic, have low elasticity, and lack strong adhesion especially to the wet tissues. In this study, a stretchable composite hydrogel consisting of gelatin methacrylol catechol (GelMAC) with ferric ions, and poly(ethylene glycol) diacrylate (PEGDA) was developed. The engineered material could adhere to the wet tissue surfaces through the chemical conjugation of catechol and methacrylate groups to the gelatin backbone. Moreover, the incorporation of PEGDA enhanced the elasticity of the bioadhesives. Our results showed that the physical properties and adhesion of the hydrogels could be tuned by changing the ratio of GelMAC/PEGDA. In addition, the in vitro toxicity tests confirmed the biocompatibility of the engineered bioadhesives. Finally, using an ex vivo lung incision model, we showed the potential application of the developed bioadhesives for sealing elastic tissues.

Engineering a naturally derived hemostatic sealant for sealing internal organs

Controlling bleeding from a raptured tissue, especially during the surgeries, is essentially important. Particularly for soft and dynamic internal organs where use of sutures, staples, or wires is limited, treatments with hemostatic adhesives have proven to be beneficial. However, major drawbacks with clinically used hemostats include lack of adhesion to wet tissue and poor mechanics. In view of these, herein, we engineered a double-crosslinked sealant which showed excellent hemostasis (comparable to existing commercial hemostat) without compromising its wet tissue adhesion. Mechanistically, the engineered hydrogel controlled the bleeding through its wound-sealing capability and inherent chemical activity. This mussel-inspired hemostatic adhesive hydrogel, named gelatin methacryloyl-catechol (GelMAC), contained covalently functionalized catechol and methacrylate moieties and showed excellent biocompatibility both in vitro and in vivo. Hemostatic property of GelMAC hydrogel was initially demonstrated with an in vitro blood clotting assay, which showed significantly reduced clotting time compared to the clinically used hemostat, Surgicel®. This was further assessed with an in vivo liver bleeding test in rats where GelMAC hydrogel closed the incision rapidly and initiated blood coagulation even faster than Surgicel®. The engineered GelMAC hydrogel-based seaalant with excellent hemostatic property and tissue adhesion can be utilized for controlling bleeding and sealing of soft internal organs.