Scanning electron microscopical observation of an osteoblast/osteoclast co-culture on micropatterned orthopaedic ceramics

Tuning the resorption-formation balance in an in vitro 3D osteoblast-osteoclast co-culture model of bone

The aim of the present study was to further improve an in vitro 3D osteoblast (OB) - osteoclast (OC) co-culture model of bone by tuning it towards states of formation, resorption, and equilibrium for their future applications in fundamental research, drug development and personalized medicine. This was achieved by varying culture medium composition and monocyte seeding density, the two external parameters that affect cell behavior the most. Monocytes were seeded at two seeding densities onto 3D silk-fibroin constructs pre-mineralized by MSC-derived OBs and were co-cultured in one of three different media (OC stimulating, Neutral and OB stimulating medium) for three weeks. Histology showed mineralized matrix after co-culture and OC markers in the OC medium group. Scanning Electron Microscopy showed large OC-like cells in the OC medium group. Micro-computed tomography showed increased formation in the OB medium group, equilibrium in the Neutral medium group and resorption in the OC medium group. Culture supernatant samples showed high early tartrate resistant acid phosphatase (TRAP) release in the OC medium group, a later and lower release in the Neutral medium group, and almost no release in the OB medium group. Increased monocyte seeding density showed a less-than-proportional increase in TRAP release and resorption in OC medium, while it proportionally increased TRAP release in Neutral medium without affecting net resorption. The 3D OB-OC co-culture model was effectively used to show an excess of mineral deposition using OB medium, resorption using OC medium, or an equilibrium using Neutral medium. All three media applied to the model may have their own distinct applications in fundamental research, drug development, and personalized medicine.

Osteoclast formation from mouse bone marrow cells on micro/nano-scale patterned surfaces

OBJECTIVES

Osteoclasts can sense the surface topography of materials. However, it is difficult to identify the structural factors that affect osteoclast formation and its function. Furthermore, we hypothesized that the type of osteoclast precursor cells also affects osteoclastogenesis in the materials. In this study, we investigated the effects of defined micro/nanoscale patterns on osteoclastogenesis from bone marrow cells (BMCs).

METHODS

Various cyclo-olefin polymer (COP) patterns were prepared using nanoimprinting. The effects of shape, size, and height of the patterns, and the wettability of the patterned surfaces on osteoclastogenesis from BMCs were evaluated in vitro.

RESULTS

Osteoclast formation was promoted on pillars (diameter, 1 μm or 500 nm; height, 500 nm). Notably, osteoclastogenesis from BMCs was better promoted on hydrophobic pillars than on hydrophilic pillars. In contrast, decreased osteoclast formation was observed on the nanopillars (diameter, 100 nm; height, 200 nm).

CONCLUSIONS

We demonstrated the promotion of osteoclast formation from BMCs on hydrophobic pillars with diameters of 1 μm and 500 nm. Some cellular behaviors in the patterns were dependent on the type of osteoclast precursor cells. The designed patterns are useful for designing the surface of dental implants or bone replacement materials with a controllable balance between osteoblast and osteoclast activities.

Assessment of Collagen-Based Nanostructured Biomimetic Systems with a Co-Culture of Human Bone-Derived Cells

Osteoporosis is a worldwide disease resulting in the increase of bone fragility and enhanced fracture risk in adults. In the context of osteoporotic fractures, bone tissue engineering (BTE), i.e., the use of bone substitutes combining biomaterials, cells, and other factors, is considered a potential alternative to conventional treatments. Innovative scaffolds need to be tested in in vitro systems where the simultaneous presence of osteoblasts (OBs) and osteoclasts (OCs), the two main players of bone remodeling, is required to mimic their crosstalk and molecular cooperation. To this aim, two composite materials were developed, based on type I collagen, and containing either strontium-enriched mesoporous bioactive glasses or rod-like hydroxyapatite nanoparticles. The developed nanostructured systems underwent genipin chemical crosslinking and were then tested with an indirect co-culture of human trabecular bone-derived OBs and buffy coat-derived OC precursors, for 2–3 weeks. The favorable structural and biological properties of the materials proved to successfully support the viability, adhesion, and differentiation of cells, encouraging a further investigation of the developed bioactive systems as biomaterial inks for the 3D printing of more complex scaffolds for BTE.

Co-culture systems of osteoblasts and osteoclasts: Simulating in vitro bone remodeling in regenerative approaches

Bone is an extremely dynamic tissue, undergoing continuous remodeling for its whole lifetime, but its regeneration or augmentation due to bone loss or defects are not always easy to obtain. Bone tissue engineering (BTE) is a promising approach, and its success often relies on a "smart" scaffold, as a support to host and guide bone formation through bone cell precursors. Bone homeostasis is maintained by osteoblasts (OBs) and osteoclasts (OCs) within the basic multicellular unit, in a consecutive cycle of resorption and formation. Therefore, a functional scaffold should allow the best possible OB/OC cooperation for bone remodeling, as happens within the bone extracellular matrix in the body. In the present work OB/OC co-culture models, with and without scaffolds, are reviewed. These experimental systems are intended for different targets, including bone remodeling simulation, drug testing and the assessment of biomaterials and 3D scaffolds for BTE. As a consequence, several parameters, such as cell type, cell ratio, culture medium and inducers, culture times and setpoints, assay methods, etc. vary greatly. This review identifies and systematically reports the in vitro methods explored up to now, which, as they allow cellular communication, more closely resemble bone remodeling and/or the regeneration process in the framework of BTE. STATEMENT OF SIGNIFICANCE: Bone is a dynamic tissue under continuous remodeling, but spontaneous healing may fail in the case of excessive bone loss which often requires valid alternatives to conventional treatments to restore bone integrity, like bone tissue engineering (BTE). Pre-clinical evaluation of scaffolds for BTE requires in vitro testing where co-cultures combining innovative materials with osteoblasts (OBs) and osteoclasts (OCs) closely mimic the in vivo repair process. This review considers the direct and indirect OB/OC co-cultures relevant to BTE, from the early mouse-cell models to the recent bone regenerative systems. The co-culture modeling of bone microenvironment provides reliable information on bone cell cross-talk. Starting from improved knowledge on bone remodeling, bone disease mechanisms may be understood and new BTE solutions are designed.

Organically modified hydroxyapatite (ormoHAP) nanospheres stimulate the differentiation of osteoblast and osteoclast precursors: a co-culture study

Isolated nanospheres consisting of organically modified hydroxyapatite (ormoHAP), prepared by an electric field-assisted ion double migration process, were embedded in foamed gelatin to form a composite scaffold. Degradation rates have been demonstrated to correlate with the crosslinking degree (40%, 80%) as well as with the mineral content of the scaffolds (0%, 20%, 40%). A human co-culture model of osteoblasts and osteoclasts, derived from bone marrow stromal cells and monocytes, respectively, without external addition of the factors RANKL and M-CSF, was run for up to 42 d in order to characterize the action of the ormoHAP-gelatin scaffolds on the co-culture. Examination was performed by quantitative biochemical methods (DNA, LDH, ALP, TRAP5b), gene expression analysis (ALP, BSP II, RANKL, IL-6, VTNR, CTSK, TRAP, OSCAR, CALCR) and confocal laser scanning microscopy (cell nuclei, actin, CD68, TRAP). Results confirm that ormoHAP embedded in the gelatin matrix enhanced TRAP 5b activity. As a feedback, ALP activity and gene expression of BSP II of osteoblasts increased. Finally, a sequence of cell cross-talk actions is suggested, which can explain the behavior of the formed vital co-culture and moreover the influence of the presence and concentration of ormoHAP.

Osteoclastogenesis Behavior of Zirconia for Dental Implant

Zirconia is worth studying as an alternative to dental titanium implants to overcome the disadvantages of titanium. This study investigated the surface characteristics of the zirconia implant material and osteoclastogenesis responses on the surface compared with titanium. Yttrium oxide-stabilized 5% tetragonal zirconia polycrystalline specimens were manufactured, and osteoclast-precursor cells were cultured and differentiated into osteoclasts on the specimens. Surface shape, roughness, and chemical composition were evaluated. After culturing, cell morphologies and differentiation capacity were analyzed using tartrate-resistant acid phosphatase activity (TRACP). mRNA of two critical transcription factors, nuclear factor of activated T-cells 1 (NFATc1) and c-Fos were measured, and protein levels of NFATc1 and c-Fos were investigated. The zirconia specimens had rhomboid-like shapes with smooth surfaces and exhibited no difference in surface roughness compared to the titanium specimens. Morphologies of differentiated osteoclasts on both materials were similar. TRACP activity on the zirconia showed comparable results to that on the titanium. The mRNA value of NFATc1 on the zirconia was higher than that on the titanium at day four. The protein level of c-Fos was expressed thicker on the zirconia when compared to the titanium at day two. The results of this study suggest that zirconia material provides adequate osteoclastogenesis behaviors for dental implant use.

Triptolide inhibits the function of TNF-α in osteoblast differentiation by inhibiting the NF-κB signaling pathway

Chronic inflammation often delays fracture healing or leads to bone nonunion. Effectively suppressing pathological inflammation is crucial for fracture healing or bone remodeling. Triptolide, which is a diterpenoid epoxide, is the major active component of the Thunder God Vine, Tripterygium wilfordii. The aim of the present study was to investigate the role of triptolide in osteoblast differentiation and explore the molecular mechanisms of triptolide in fracture healing. Alkaline phosphatase (ALP) activity was used to evaluate osteoblast differentiation. ALP activity was measured via histochemical staining and western blotting was used to determine the expression of factors associated with inflammation. C2C12 cells were initially treated with 200 ng/ml bone morphogenetic protein (BMP)-2 alone for 3 days, which caused a significant increase in ALP activity (P<0.01). However, treatment with tumor necrosis factor (TNF)-α significantly decreased the ALP activity (P<0.05). Notably, treatment with the chronic inflammatory cytokine TNF-α significantly decreased the effect of BMP-2 in C2C12 cells compared with BMP-2 treatment alone (P<0.01). C2C12 cells were treated with increasing concentrations of BMP-2 or TNF-α for 3 days. The results demonstrated that TNF-α treatment significantly inhibited BMP-2-induced osteoblast differentiation in a dose-dependent manner (P<0.01). The role of triptolide in BMP-2-induced osteoblast differentiation was also examined. Cells were treated with BMP-2, BMP-2 + TNF-α alone, or BMP2 + TNF-α with increasing concentrations of triptolide (4, 8 or 16 ng/ml). After 3 days, the results of ALP activity revealed that triptolide significantly reversed the TNF-α-associated inhibition of osteoblast differentiation (P<0.01). Western blotting analysis demonstrated that triptolide markedly inhibited the phosphorylation of nuclear factor-κB, therefore suppressing the effects of TNF-α. In summary, triptolide is able to reverse the TNF-α-associated suppression of osteoblast differentiation, suggesting that triptolide treatment may have a positive effect on bone remodeling and fracture repairing.

Osteogenic and bactericidal surfaces from hydrothermal titania nanowires on titanium substrates

Nanotopographical cues on Ti have been shown to elicit different cell responses such as cell differentiation and selective growth. Bone remodelling is a constant process requiring specific cues for optimal bone growth and implant fixation. Moreover, biofilm formation and the resulting infection on surgical implants is a major issue. Our aim is to identify nanopatterns on Ti surfaces that would be optimal for both bone remodelling and for reducing risk of bacterial infection. Primary human osteoblast/osteoclast co-cultures were seeded onto Ti substrates with TiO₂ nanowires grown under alkaline conditions at 240 °C for different times (2, 2.5 or 3 h). Cell growth and behaviour was assessed by scanning electron microscopy (SEM), immunofluorescence microscopy, histochemistry and quantitative RT-PCR methods. Bacterial colonisation of the nanowire surfaces was also assessed by confocal microscopy and SEM. From the three surfaces tested the 2 h nanowire surface supported osteoblast and to a lesser extent osteoclast growth and differentiation. At the same time bacterial viability was reduced. Hence the 2 h surface provided optimal bone remodeling in vitro conditions while reducing infection risk, making it a favourable candidate for future implant surfaces.

Establishment of a 3D-dynamic osteoblasts-osteoclasts co-culture model to simulate the jawbone microenvironment in vitro

AIMS

We aimed to establish a 3D osteoblasts/osteoclasts co-culture system requiring limited amounts of human primary cells and useful as platform to 1. recapitulate an "oral bone microenvironment" in healthy or pathological condition, and 2. produce potential implantable cell constructs for regeneration of jawbone which can be negatively affected by bisphosphonates (BPs).

MAIN METHODS

Osteoblasts from normal bone chips (hOBs) or from jawbone of patients taking BPs (hnOBs) were co-cultured with monocytes (hMCs) either in static (3D-C) or dynamic (3D-DyC) condition using the RCCS-4™ bioreactor for 3weeks. Cell aggregates were characterized for viability, histological features and specific osteoclastic and osteogenic markers.

KEY FINDINGS

In all tested conditions hOBs supported the formation of mature osteoclasts (hOCs), without differentiating agents or exogenous scaffolds. 3D-DyC condition associated with a ground based condition (Xg) rather than modeled microgravity (μXg) produced aggregates with high level of osteogenic markers including Osteopontin (OPN), Osterix (OSX), Runx2 and appreciable bone mineral matrix. hnOBs co-cultured with hMCs in 3D-Dyc/Xg condition generated OPN and mineral matrix positive aggregates.

SIGNIFICANCE

We optimized a 3D co-culture system with a limited amount of cells preserving viability and functionality of bone cellular components and generating bone-like aggregates also by using cells from jawbone necrotic tissue. The feasibility to obtain from poor-quality bone sites viable osteoblasts able to form aggregates when co-cultured with hMCs, allows to study the development of autologous implantable constructs to overcome jawbone deficiency in patients affected by MRONJ (Medication-Related Osteonecrosis of the Jaws).

Surface micropatterning with zirconia and calcium phosphate ceramics by micromoulding in capillaries

Micropatterning of silicon surface with bioinert yttria-stabilised zirconia or bioactive calcium phosphate ceramic by micromoulding in capillaries.