Manual wheelchair propulsion cost across different components and configurations during straight and turning maneuvers

Effects of Incremental Changes to Frame Mass on Manual Wheelchair Propulsion Cost

The objective of this study was to assess the effects of small, incremental additions to wheelchair frame mass (0 kg, +2 kg, and +4 kg) on the mechanical propulsion characteristics in both straight and curvilinear maneuvers. A robotic propulsion system was used to propel a manual wheelchair over a smooth tiled surface following rectilinear ("Straight") and curvilinear ("Slalom") trajectories. Three unique loading conditions were tested. Propulsion costs and system rolling resistance estimations were empirically collected using the robotic wheelchair tester. Propulsion cost values were equivalent across all loading conditions over the Slalom trajectory. In the Straight trajectory, adding 2 kg on the axle had equivalent propulsion cost to the unloaded configuration. Adding 4 kg on axle was comparable, but not equivalent, to the unloaded configuration with small (≤4.1%) increases in propulsion cost. This study demonstrates that small (0-4 kg) changes to the frame mass have no meaningful impacts on the propulsion characteristics of the manual wheelchair system. Differences in propulsion cost and rolling resistance were detectable but contextually insignificant.

Effect of Wheels, Casters and Forks on Vibration Attenuation and Propulsion Cost of Manual Wheelchairs

Manual wheelchair users are exposed to whole-body vibrations as a direct result of using their wheelchair. Wheels, tires, and caster forks have been developed to reduce or attenuate the vibration that transmits through the frame and reaches the user. Five of these components with energy-absorbing characteristics were compared to standard pneumatic drive wheels and casters. This study used a robotic wheelchair propulsion system to repeatedly drive an ultra-lightweight wheelchair over four common indoor and outdoor surfaces: linoleum tile, decorative brick, poured concrete sidewalk, and expanded aluminum grates. Data from the propulsion system and a seat-mounted accelerometer were used to evaluate the energetic efficiency and vibration exposure of each configuration. Equivalence test results identified meaningful differences in both propulsion cost and seat vibration. LoopWheels and SoftWheels both increased propulsion costs by 12-16% over the default configuration without reducing vibration at the seat. Frog Legs suspension caster forks increased vibration exposure by 16-97% across all four surfaces. Softroll casters reduced vibration by 11% over metal grates. Wide pneumatic 'mountain' tires showed no difference from the default configuration. All vibration measurements were within acceptable ranges compared to health guidance standards. Out of the component options, softroll casters show the most promising results for ease of efficiency and effectiveness at reducing vibrations through the wheelchair frame and seat cushion. These results suggest some components with built-in suspension systems are ineffective at reducing vibration exposure beyond standard components, and often introduce mechanical inefficiencies that the user would have to overcome with every propulsion stroke.

Effect of Manual Wheelchair Type on Mobility Performance, Cardiorespiratory Responses, and Perceived Exertion

This study is aimed at comparing the design and configuration of the most commonly used manual wheelchair models through cardiorespiratory responses, perceived exertion, and mobility performance using two different manual wheelchairs, during mobility tasks. A within-group 2 × 3 × 2 controlled experiment was designed with three independent and four dependent variables. The independent variables included wheelchairs, with the levels active wheelchair with a rigid frame and passive wheelchair with foldable frame; conditions with the levels straight line, slalom, and agility; and speed with levels comfortable and fast. Dependent variables included oxygen uptake (VO₂), distance travelled, speed, and perceived exertion. Results show that the active wheelchair yielded more beneficial characteristics although only the effect of wheelchair type on VO₂ efficiency (oxygen uptake per meter travelled) was statistically significant with a large effect size (F(1, 14) = 118.298, p < 0.001, η² = 0.541). The better VO₂ efficiency was achieved with the active wheelchair under all tested conditions. The effect of wheelchair type on Borg scores was also statistically significant, although with a small effect size (F(1, 14) = 10.340, p = 0.006, η² = 0.119); thus, active wheelchair use had lower Borg scores under all trials and was considered less exhausting than the passive wheelchair. In summary, use of the active wheelchair resulted in the users expending less energy per meter travelled and at the same time experiencing less fatigue. This may benefit overall wheelchair mobility and possibly reduce health complications.

Propulsion Cost Changes of Ultra-Lightweight Manual Wheelchairs After One Year of Simulated Use

Manual wheelchairs are available with folding or rigid frames to meet the preferences and needs of individual users. Folding styles are commonly regarded as more portable and storable, whereas rigid frames are commonly regarded as more efficient for frequently daily use. To date, there are no studies directly comparing the performances of the frame types. Furthermore, while differences have been reported in the longevity of the frame types, no efforts have been made to relate this durability back to the real-world performance of the frames. This study investigated the propulsion efficiencies of four folding and two rigid ultra-lightweight frames equipped with identical drive tires and casters. A robotic wheelchair tester was used to measure the propulsion costs of each chair over two surfaces: concrete and carpet. A motorized carousel was used to drive the chairs 511 km around a circular track to simulate one year of use for each wheelchair. After simulated use, five of the six wheelchairs showed no decrease in propulsion effort, indicating that the frames were able to withstand the stresses of simulated use without a detrimental impact on performance. In the unused "new" condition, rigid chairs were found to have superior (>5%) performance over folding frames on concrete and carpet, and in the "worn" condition rigid chairs had superior performance over folding chairs on concrete but were comparable on the carpeted surface.

Scoping review of the rolling resistance testing methods and factors that impact manual wheelchairs

Introduction

Rolling resistance (RR) is a drag force acting on manual wheelchairs that is associated with increased propulsion force and is linked to secondary disabling conditions of the upper limbs. A scoping review was conducted to understand how RR of manual wheelchairs has been measured and to identify limitations of those test methods and the factors tested.

Methods

A total of 42 papers were identified and reviewed, and test methods were categorized based on the measurement style of RR, testing level, and if multiple parameters could be tested. Additionally, 34 articles were reviewed for what factors were tested.

Results

Seven different testing methods categories were identified: drag test, treadmill, motor draw, deceleration, physiological expenditure, ergometer/dynamometer, and robotic test rig. Relevant articles were categorized into testing factor categories: camber, toe, tire type, tire pressure, caster type, mass, mass distribution, and type of surface.

Conclusions

The variety of testing methods suggests the need for a standardized method that can be used for wheelchair wheel design and selection to reduce RR. It is important to use adjustments, such as a forward rear axle position to mitigate RR as well as using high-pressure pneumatic tires that are properly inflated.

Modeling manual wheelchair propulsion cost during straight and curvilinear trajectories

Minimizing the effort to propel a manual wheelchair is important to all users in order to optimize the efficiency of maneuvering throughout the day. Assessing the propulsion cost of wheelchairs as a mechanical system is a key aspect of understanding the influences of wheelchair design and configuration. The objective of this study was to model the relationships between inertial and energy-loss parameters to the mechanical propulsion cost across different wheelchair configurations during straight and curvilinear trajectories. Inertial parameters of an occupied wheelchair and energy loss parameters of drive wheels and casters were entered into regression models representing three different maneuvers. A wheelchair-propelling robot was used to measure propulsion cost. General linear models showed strong relationships (R² > 0.84) between the system-level costs of propulsion and the selected predictor variables representing sources of energy loss and inertial influences. System energy loss parameters were significant predictors in all three maneuvers. Yaw inertia was also a significant predictor during zero-radius turns. The results indicate that simple energy loss measurements can predict system-level performance, and inertial influences are mostly overshadowed by the increased resistive losses caused by added mass, though weight distribution can mitigate some of this added cost.