Harris-Galante II acetabular cup: a survival analysis

20-year Results of a 3D Titanium Mesh Coating Stability of 31 Artificial Cups

BACKGROUND

The aim of this work was to demonstrate the bony bond strength and resilience of a three-dimensional titanium mesh coating of an artificial acetabulum produced using the diffusion bonding technique. Under the extreme conditions ranging from abrasion-related osteolysis to acetabular perforation, the degree of residual bone and the integrity of the coating were determined. The remaining zones of the (still) stable bone connection are inevitably exposed to a greater load of the layer adhesion between the titanium mesh and the core shell. The investigation was intended to provide information about the stages of damage according to Paprosky in which it was still justifiable to leave the implant in place and simply change the inlay from the purely material-technical point of view of a stable coating. The bond between bone and implant was examined with regard to a possible retention of the implant for its adaptive remodeling up to 27 years.

MATERIALS AND METHODS

In a retrospective study, 31 explanted human acetabular cups of the Harris-Galante II type, with an average lifetime of 19.7 years (11-27 years), were examined by means of digital area measurement to determine both the bone areas remaining on the coating and the damaged areas of the titanium mesh. Periacetabular bone loss was recorded in a modified Paprosky (PAP) damage classification. Full hemispherical sections of 4 acetabular cups with a life time of 16, 20, 22 and 27 years were examined histopathologically using the diamond cut technique.

RESULTS

The periacetabular bone loss resulted in damage class PAP I in 8 cases, PAP IIa in 7 cases, PAP IIb in 2 cases, PAP IIc in 9 cases, PAP IIIa in 3 cases and PAP IIIa in 2 cases PAP IIIb. The average amount of bone that was still firmly attached to the coating after explantation was 17% (0-70%) of the total cup surface. Paprosky I accounted for 44.1%, and PAP IIa and IIb stadiums together a total of 17.1%. The average bone fraction of the implants no longer anchored in the host bed at stages IIc, IIIa and IIIb was 2%. The average coating damage was 11% (0-100%) and was exclusively attributable to the unstable implants of stages IIc, IIIa and IIIb. The histopathological findings showed adaptive bone remodeling, that was detectable for up to 27 years through the titanium mesh down to the interface with the solid acetabular core. The titanium wire mesh was mostly surrounded by lamellar, mature bone.

CONCLUSION

The results show that the connection between the Tivanium cup and the previously oldest and unchanged sintered coating - in the form of a three-dimensional titanium mesh applied in point and line contact - is very load-resistant even under the extreme loads of periacetabular osteolysis and cup perforations. Since there was no damage to the coating in periacetabular damage stages Paprosky I, IIa and IIb, it is justifiable in these damage stages to leave the implant in situ and to continue to use it with sole replacement of the inlay, but leaving the socket shell. The third-generation acetabular cup (Trilogy) with unchanged three-dimensional titanium mesh coating has been implanted in over 1.2 million cases for 26 years. After a long service life, an increasing number of wear and tear conditions can be expected in today's mostly elderly and vulnerable patient clientele. In view of the results presented here, the early detection of damage would make it possible to avoid costly and stressful explantation of the entire acetabular cup in favor of replacing the sole inlay in Paprosky stages I, IIa and IIb.

Long-Term Outcomes for Cementless Anatomic Femoral Components, Compared by Area of Porous Coating, in Patients Younger Than 50 Years Treated for Hip Dysplasia

BACKGROUND

We investigated whether the proximal circumferential porous coating of cementless stems would make implant survival of >20 years possible in young patients.

METHODS

Data for patients younger than 50 years with hip dysplasia who had an anatomic stem implanted with a proximal porous coating with hydroxyapatite/tricalcium phosphate were reviewed. Noncircumferential porous (non-C-type) stems were used in 17 hips (13 cases), and circumferential porous (C-type) stems were used in 87 hips (68 cases). Acetabular components with conventional polyethylene were used for all hips. The mean ages at surgery for patients with non-C-type stems and those with C-type stems were 43.3 and 44.7 years, respectively. Stems that had not loosened were retained at the time of acetabular revision. The average duration of follow-up for patients with non-C-type stems was 26.9 years and was 22.3 years for those with C-type stems.

RESULTS

Mean survival rates as determined by the Kaplan-Meier method were 74.9% at 20 years and 59.9% at 25 years for non-C-type stems and were 100% at 20 years and 94.0% at 25 years for C-type stems. The survivorship for C-type stems was significantly higher than that for non-C-type stems (P < .01). Focal osteolysis in the shoulder of 37 hips with C-type stems suppressed the spread of osteolysis to the distal femur.

CONCLUSION

Anatomic femoral stems with a circumferential porous coating provide excellent durability in patients with hip dysplasia who are 50 years of age or younger.

LEVEL OF EVIDENCE

Therapeutic Level IV.

An 18-year comparison of hybrid total hip replacement and Birmingham hip resurfacing in active young patients

AIM

To compare the long-term clinical and radiological results of metal-on-polyethylene hybrid total hip replacement (THA) with metal-on-metal Birmingham hip resurfacing (BHR) in young, active patients.

PATIENTS AND METHODS

From the 1st consecutive 63 hips in young, active patients who underwent BHR by the senior author, 54 (51 patients) were matched to patients who had undergone THA with regard to age, gender, body mass index and preoperative levels of activity. Radiologically, all hips were assessed for migration and osteolysis, THAs for polyethylene wear and BHRs for a pedestal sign. Patient-reported outcomes, mortality and revision rates were compared.

RESULTS

The mean follow-up of the patients with a hybrid THR was 19.9 years and for those with a BHR, 17.6 years. 13 patients with a hybrid THR and 5 with a BHR had died. 1 hybrid THR and 3 BHRs were lost to follow-up. The revision rate of the hybrid THRs was 14/54 and of the BHRs 6/54. Log rank comparison of Kaplan-Meier survival estimates demonstrated a significantly lower mortality in the BHR group (p = 0.039; hazard ratio [HR] = 0.37 [95% CI, 0.15-0.95]) but a non-significant difference in revision rates (p = 0.067; HR = 0.43 [95% CI, 0.18-1.06]). The BHRs recorded superior OHS (p = 0.03), UCLA (p = 0.0096), and EuroQol visual analogue scores (p = 0.03). Significantly more BHRs had run, played sport and undertaken heavy manual labour in the month preceding follow-up.

CONCLUSION

After 18 years, patients with BHRs remained more active with a lower mortality rate but demonstrated no significant difference in revision rates. Both groups demonstrated progressive radiological changes at long-term follow-up.

The incidence of dissociated liners in 4,751 consecutive total hip arthroplasties using Pinnacle polyethylene acetabular liners

INTRODUCTION

Acetabular liner dissociation is a complication exclusive to modular designs. We present a single surgeon series of 8 polyethylene liner dissociations with the Pinnacle Acetabular System (DePuy Orthopaedics) from over 4,750 cases. We also present a review of the literature and data from the UK National Joint Registry (NJR) on dissociation in total hip arthroplasty (THA).

METHODS

The Pinnacle Acetabular System has been used exclusively by the senior author since April 2003, and to date 5,882 have been implanted (837 ceramic liners, 4,751 polyethylene liners (1,606 Enduron/3,145 Marathon) and 294 metal liners). We reviewed all cases of liner dissociation from this cohort to determine an overall incidence with polyethylene liners, identify associated risk factors, and report the outcome following revision surgery.

RESULTS

Our incidence of this complication is 8 out of 4,751 cases (0.17%). Review of these cases and the literature suggests that femoral neck impingement against the polyethylene liner and/or edge loading may produce fatigue failure of the locking mechanism and subsequent dissociation.

CONCLUSIONS

Ensuring correct liner seating/locking, minimising impingement, achieving appropriate component version and avoiding radiographic cup inclinations >50° should minimise the risk of liner dissociation. Any new noise or squeaking from a polyethylene liner should undergo radiographic investigation to exclude dissociation. We recommend managing late cases of liner dissociation with revision of the acetabular shell if the cup orientation could be improved or if there is any damage to the liner-locking groove, to reduce the risk of recurrence.

Long-Term Outcomes of Liner Cementation into a Stable Retained Shell: A Concise Follow-up of a Previous Report

Liner cementation into a preexisting stable socket may reduce the morbidity of revision hip arthroplasty and preserve acetabular bone. However, the long-term outcomes of this technique remain unknown. The purpose of this report was to analyze the long-term results of a previously reported cohort of patients. Cementation of thirty-two liners (seventeen polyethylene and fifteen metal liners) into preexisting sockets was performed during revision hip arthroplasty, and the patients were followed for a minimum of two years. A retrospective chart review was performed to investigate the complications and survivorship. The mean duration of follow-up was 12.7 years (range, 2.1 to 19.1 years), with ten hips requiring rerevision at a mean of 6.4 years (range, 1.0 to 15.5 years). Nine patients experienced posterior dislocations, and two hips required rerevision for instability. Liner dissociation from the shell occurred in two patients. Survivorship analysis, with rerevision as the end point, demonstrated ten and fifteen-year survivorship of 77.3% and 68.8%, respectively. Dissociation of the cemented liner from the acetabular shell was an infrequent cause of failure despite long-term follow-up. Given the high rate of dislocations in this study, careful patient selection and surgical technique should be considered.

LEVEL OF EVIDENCE

Therapeutic Level III. See Instructions for Authors for a complete description of levels of evidence.

The tram track sign: a characteristic sonographic feature of polyethylene liner dissociation after total-hip arthroplasty

OBJECTIVES

Polyethylene liner dissociation from an acetabular component is a complication of total-hip arthroplasty (THA) caused by slippage of the liner, which causes pain and requires a revision. The aim of this study was to evaluate sonographic features of liner dissociation and detect useful sonographic findings compared to conventional radiography and computed tomography (CT).

METHODS

Among a total of 226 patients who underwent revision THA at our institution between September 2008 and June 2012, 10 patients (6 male and 4 female; mean age, 56.2 years) who showed severe narrowing of the superior joint space on the THA side and underwent sonography were retrospectively reviewed by evaluating radiographic, CT, and sonographic findings. In evaluation of the images, we put more emphasis on the "radiographic crescent sign," "CT crescent sign," and "sonographic tram track sign."

RESULTS

At surgery, 7 patients showed liner dissociation, and 3 showed severe liner wear. On radiography, 8 of 10 patients (80%) had a correct diagnosis of the presence or absence of liner dissociation; on sonography, all 10 patients (100%) had a correct diagnosis. The sensitivity, specificity, and accuracy for diagnosis of liner dissociation by pelvic radiography and sonography were 100% (7 of 7), 33% (1 of 3), and 80% (8 of 10) and 100% (7 of 7), 100% (3 of 3), and 100% (10 of 10), respectively.

CONCLUSIONS

Liner dissociation can be easily and well visualized by sonography, especially compared to pelvic radiography and CT. The sonographic tram track sign should be a very useful feature in the early diagnosis of liner dissociation.

A medium-term comparison of hybrid hip replacement and Birmingham hip resurfacing in active young patients

We compared the medium-term clinical and radiological results of hybrid total hip replacement (THR) with metal-on-metal Birmingham hip resurfacing (BHR) in two groups of 54 young patients matched for age, gender, body mass index and pre-operative levels of activity.

The clinical outcome was assessed by the University of California, Los Angeles (UCLA) activity score, the Oxford Hip Score (OHS) and the EuroQol scores. Radiologically, all hips were assessed for migration and osteolysis, the hybrid THRs for polyethylene wear and the BHRs for a pedestal sign. The mean follow-up of the patients with a hybrid THR was ten years and for those with a BHR, nine years. Four patients with a hybrid THR and one with a BHR had died. In each group five were lost to follow-up. The revision rate of the hybrid THRs was 16.7% (9 of 54) and of the BHRs 9.3% (5 of 54) (p = 0.195). Radiographs of a further eight hybrid THRs demonstrated wear and osteolysis, and they await revision (p = 0.008). Of the unrevised BHRs 90% had radiological changes, of which approximately 50% had progressed over the previous four years. All hybrid THRs demonstrated linear polyethylene wear with a mean of 1.24 mm (0.06 to 3.03). The BHRs recorded superior OHS (p = 0.013), UCLA (p = 0.008), and EuroQol visual analogue scores (p = 0.009).

After nine years, patients with BHRs remained more active and had a lower rate of revision than those with hybrid THRs. Both groups demonstrated progressive radiological changes at medium-term follow-up.

Survivorship of polyethylene liner exchanges performed for the treatment of wear and osteolysis among porous-coated cups

For the past 17 years, we have favored treating patients with polyethylene wear and osteolysis by performing a liner exchange with retention of the old shell when possible. Using our institutional database, we identified 187 acetabular revisions in which we had retained the old shell. Among this group, we found 25 rerevisions. These included 10 for hip instability, 9 for cup loosening, 3 for recurrence of excessive wear or osteolysis, 2 for infection, and 1 for dissociation of the replaced liner. The need for rerevision varied with the different retained shell designs. We rerevised 17% of the total hip arthroplasties with old spiked shells, 21% with Arthropor shells, 13% with Triloc shells and 5% with Duraloc shells. Before making a decision to retain or remove a well-fixed old acetabular shell, we recommend consideration of the design's past track record and careful inspection of the condition of the existing shell.