Comparative Systematic Review of Fixation Methods of the Coracoid and Conjoined Tendon in the Anterior Glenoid to Treat Anterior Shoulder Instability

Inlay structure can improve bone graft stability in the Bristow procedure

BACKGROUND

Compared with the Latarjet procedure, the Bristow procedure has a lower screw-related complication rate but poor bone healing. A modified Inlay Bristow procedure has been reported to significantly improve the bone healing rate, but the biomechanical mechanism is unclear. The aim of this study was to evaluate the biomechanical stability of the bone graft between a modified Inlay Bristow procedure and the classic Bristow procedure.

METHODS

Sixteen left scapula models (Sawbones, Composite Scapula, and fourth generation) were randomly divided into 2 groups (8:8). The bone graft in the first group was fixed with a 3.5 mm screw using the Inlay structure. The bone graft in the second group was fixed with a 3.5 mm screw via the traditional method. The maximum cyclic displacement, ultimate failure load and stiffness were evaluated biomechanically. The failure type was recorded for each model.

RESULTS

Cyclic loading tests demonstrated that the maximum cyclic displacement of the Inlay procedure was significantly smaller (P = .001) than that of the classic procedure. The Inlay Bristow technique resulted in a significantly higher (P = .024) ultimate failure load than the classic Bristow technique. The stiffness of the classic group was 19.17 ± 4.01 N/mm and that of the inlay group was 22.34 ± 5.35 N/mm (P = .232). Failure was mainly due to bone graft fractures through the drill hole or glenoid bone fractures.

CONCLUSION

Inlay Bristow fixation of the bone graft in a Sawbones model provides significantly stronger fixation and better time point zero stability than classic Bristow fixation, suggesting a higher likelihood of graft union.

Efficacy and safety of the Latarjet procedure for the treatment of athletes with glenoid bone defects ≥ 20%: a single-arm meta-analysis

BACKGROUND

The shoulder joint is the most commonly dislocated joint in the human body, and the recurrence rate exceeds 50% after nonsurgical treatment. Although surgical treatment reduces the recurrence rate, there is controversy regarding the optimal surgical approach. Previous studies suggest that the Latarjet procedure yields favourable outcomes for specific populations at risk of recurrence, such as competitive athletes with significant glenoid defects. However, most of the existing related research consists of nonrandomized controlled trials with small sample sizes, and there is a lack of strong evidence regarding the efficacy and safety of the Latarjet procedure.

METHODS

The PubMed, Embase, Cochrane Library, and Web of Science databases were systematically searched. Athletes with ≥ 20% glenoid defects were selected for inclusion. The following data were extracted: general patient information, instability rates, return to sports (RTS) rates, imaging features (graft positioning rate and graft healing rate), functional assessments [Rowe score, Athletic Shoulder Outcome Scoring System(ASOSS), visual analogue scale (VAS), forward flexion function, and external rotation function], and complications.

RESULTS

After excluding suspected duplicate cases, a total of 5 studies were included in this meta-analysis. The studies involved a total of 255 patients, including 237 males (93%) and 18 females (7%). The average age at the time of surgery was 25.4 ± 8.5 years. All the studies had a minimum follow-up period of 2 years, with an average follow-up time of 48.7 ± 18.9 months. The pooled rate of return to sport (RTS) was 94.3% (95% CI: 87.3%, 98.8%), and 86.1% (95% CI: 78.2%, 92.5%) of patients returned to their preoperative level of activity. The pooled redislocation rate was 1.1% (95% CI: 0%, 3.8%). Regarding the imaging results, the combined graft retention rate was 92.1% (95% CI: 88.1%, 95.5%), and the graft healing rate was 92.1% (95% CI: 88%, 95.4%). Postoperative functional evaluation revealed that the combined Rowe score, ASOSS score, and VAS score were 93.7 ± 6.5 points, 88.5 ± 4.4 points, and 1.1 ± 10 points, respectively. The forward flexion and external rotation angles were 170.9 ± 6.9 degrees and 65.6 ± 4.5 degrees, respectively. After excluding one study with unclear complications, the combined complication rate was 9.4% (95% CI: 1.0%, 23.6%).

CONCLUSION

For athletes with shoulder instability and a total of ≥ 20% glenoid bone defects, the Latarjet procedure can achieve excellent functional outcomes, with the majority of patients returning to preoperative levels of sports activity. This procedure also leads to a low recurrence rate. Therefore, the Latarjet procedure has been proven to be a safe and effective treatment.

Determining optimal length of coracoid graft in the modified Bristow procedure for anterior shoulder instability: A three-dimensional finite element analysis

BACKGROUND

There is a lack of consensus concerning the coracoid graft length in the modified Bristow procedure.

OBJECTIVE

We attempted to determine the optimal graft length using the three-dimensional finite element method.

METHODS

In a shoulder model with a 25% anterior glenoid defect, a coracoid graft of varying lengths (5, 10, 15, and 20 mm) was fixed using a half-threaded screw. First, a compressive load of 500 N was applied to the screw head to determine the graft failure load during screw tightening. Next, a tensile load (200 N) was applied to the graft to determine the failure load due to biceps muscle traction.

RESULTS

In the screw compression, the failure loads in the 5-, 10-, 15-, and 20-mm models were 252, 370, 377, and 331 N, respectively. In the tensile load applied to the coracoid graft, the failure load exceeded 200 N for both the 5- and 10-mm models.

CONCLUSION

The 5-mm graft had a high risk of fracture during intraoperative screw tightening. As for the biceps muscle traction, the 5- and 10-mm-grafts had a lower failure risk than the 15- and 20-mm-grafts. Therefore, we believe that the optimal length of the coracoid graft is 10 mm in the modified Bristow procedure.

Editorial Commentary: Both Bristow and Latarjet Procedures Result in Low Rates of Recurrent Shoulder Instability Despite Potential for Bone Resorption and Lack of Graft Healing

Anterior shoulder instability surgery has evolved over the decades, including both anatomic and nonanatomic repairs and reconstructions. Surgeons are continually advancing their skills and performing more of these procedures using arthroscopic as opposed to open techniques in patients with and without glenoid bone loss. However, there is a steep learning curve and increased technical demands when performing these procedures arthroscopically. Despite high success rates, bone graft resorption or lack of healing after Latarjet and Bristow procedures is well documented, and it is possible that patients develop enough scarring that their shoulders remain stable. Osteoarthritis after these nonanatomic procedures can occur making shoulder arthroplasty and reconstruction technically more challenging because of scarring and the altered anatomy. It remains to be seen whether these arthroscopic techniques as opposed to open surgery lessen the scarring and thus the technical demands of shoulder reconstruction in the small subset of patients who unfortunately develop symptomatic shoulder osteoarthritis. Therefore, in my practice, these techniques are carefully chosen for select patients. My indications for use of the Bristow procedure as a primary procedure for anterior shoulder instability are in patients who perform mixed martial arts fighting and high-level wrestlers without significant glenoid or humeral bone loss. My indications for the Latarjet procedure are in patients with chronic anterior instability and associated anterior glenoid bone loss 15% to 30%, off-track Hill-Sachs lesions, and revision surgery, particularly in high-demand contact and collision athletes. These 2 arthroscopic procedures, despite being nonanatomic, provide surgeons with excellent treatment options for those difficult patients with anterior shoulder instability. Despite high success rates with these arthroscopic procedures, patients should be counseled on the risks of graft resorption, graft nonunion, and possible shoulder osteoarthritis. The appropriate indications for these arthroscopic procedures can enhance the successful outcomes for high-risk patients with shoulder instability while also considering the possible long-term impacts of altering shoulder anatomy and scarring in the rare patient who develops shoulder osteoarthritis.

The Arthroscopic Bristow Procedure Is Superior to the Arthroscopic Latarjet Procedure in Return to Sports but Inferior in Graft Healing: A Comparative Study With 3.4-Year Follow-Up

PURPOSE

To compare clinical and computed tomography outcomes between the arthroscopic Latarjet procedure and the arthroscopic Bristow procedure.

METHODS

Patients who underwent arthroscopic Latarjet or Bristow procedures with at least 2 years of follow-up were retrospectively reviewed. Thirty-eight shoulders were included in the Latarjet group, and 34 were included in the Bristow group. Recurrence of dislocation, clinical scores, rate of return to sports (RTS), and computed tomography assessment findings (position of transferred coracoid, graft healing, graft absorption, and glenohumeral degenerative osteoarthritis [OA]) were obtained at final follow-up.

RESULTS

No recurrent dislocation occurred in either group, and no significant differences in clinical scores were found between the 2 procedures, with a mean follow-up period of 3.4 years. The operative time in the Bristow group was significantly shorter than that in the Latarjet group (P < .001). The transferred coracoid had healed in 94.7% of the patients in the Latarjet group and 85.3% in the Bristow group at final follow-up (P = .01). No significant difference in graft absorption or the degree of glenohumeral OA was detected between the 2 groups. However, moderate to severe OA only occurred in the Latarjet group at final follow-up (4 of 38 shoulders, 10.5%). The postoperative external rotation angle and level of RTS favored the Latarjet procedure (P = .030 and P = .034, respectively).

CONCLUSIONS

Both the arthroscopic Latarjet and arthroscopic Bristow procedures led to good clinical scores with no new dislocation episodes. The Bristow group showed significantly less graft healing than the Latarjet group. However, the arthroscopic Bristow procedure took less operative time and showed a lower rate of early moderate to severe glenohumeral OA, better range of motion, and a higher rate of RTS.

LEVEL OF EVIDENCE

Level III, retrospective comparative therapeutic trial.

Use of Cannulated Screws for Primary Latarjet Procedures

Background

Rapid consolidation of the bone block is paramount for the success of the Latarjet procedure. Noncannulated screws have shown satisfactory long-term bone block fusion, while cannulated screws are challenged with inferior mechanical properties and fusion rates.

Purpose

To report outcomes of the Latarjet procedure using cannulated screws, notably bone block fusion and complication rates at 3 months, as well as clinical scores and return to sports at minimum 2 years postoperatively.

Study Design

Case series; Level of evidence, 4.

Methods

We reviewed the records of 124 consecutive patients (124 shoulders) who underwent primary Latarjet procedures using cannulated screws between 2015 and 2018. All patients underwent clinical examination at 3 months postoperatively, including range of motion and radiographs to assess graft fusion. The Walch-Duplay score, Rowe score, Subjective Shoulder Value, and visual analog scale for pain were collected at a minimum follow-up of 2 years.

Results

Overall, 9 patients (7%) required reoperation: 7 (6%) had screw removal for unexplained residual pain, 1 (0.8%) had lavage for deep infection, and 1 (0.8%) had evacuation to treat a hematoma. Furthermore, 3 patients (2.4%) had recurrent instability, none of whom underwent reoperation. At 3-month follow-up, all 124 shoulders showed complete radiographic graft fusion, and at 40 ± 11 months (mean ± SD; range, 24-64 months), 88% of patients had returned to sport (109/124), the Walch-Duplay score was 86 ± 14, Rowe was 84 ± 15, Subjective Shoulder Value was 88 ± 11, and visual analog scale for pain was 1 ± 1.

Conclusion

The clinical relevance of these findings is that 4.5-mm cannulated screws are safe and effective for primary Latarjet procedures and grant adequate graft healing, with low recurrence of instability and a high rate of return to sports.

Clinical and Radiologic Outcomes of All-Arthroscopic Latarjet Procedure With Modified Suture Button Fixation: Excellent Bone Healing With a Low Complication Rate

PURPOSE

To investigate the clinical outcomes and radiologic evaluation of an all-arthroscopic Latarjet procedure with modified button fixation.

METHODS

Patients who received all-arthroscopic Latarjet procedure with modified suture button fixation between September 2015 to September 2016 were retrospectively reviewed. Indications for surgery were recurrent anterior shoulder dislocation with any 1 of these 3 conditions: glenoid defect >15%, contact-sport athlete, or failure after Bankart repair. Inclusion criteria included cases who received this surgery. Clinical outcomes were evaluated by University of California Los Angeles, ASES and Rowe score with a minimal follow-up of 3 years. Radiologic assessment on 3D computed tomography scan was performed preoperatively and postoperatively at different time points. Complications were also recorded.

RESULTS

A total of 30 patients were eventually included in this study. The mean follow-up time was 38.0 ± 2.5 months. There were 25 patients who performed contact sports. Of them, 10 patients were without glenoid defect >15% or failed Bankart repair. The remaining 20 patients had glenoid defect >15%, including 2 failed Bankart cases. Ten patients had glenoid defect < 13.5%, and the rest 20 patients had > 13.5%. UCLA, American Shoulder and Elbow Surgeons, and Rowe score significantly improved during follow-up, and the improvement exceeded MCID for all patients. No severe complications were noted. In total, 86.7% of the graft positioning was measured as flush and 13.3% as medial. The bone union rate was 96.7% at 3 months postoperatively and at final follow-up. The remodeling process for the restoration of the normal anatomy of the lower part of glenoid was noted.

CONCLUSIONS

All-arthroscopic Latarjet with modified suture button fixation can achieve stable fixation of the coracoid, good clinical outcomes (all patients with improvement exceeding MCID), low complications rate. Furthermore, the bone remodeling process contributes to the recovery of the normal anatomy of anteroinferior glenoid.

STUDY DESIGN

Case series; Level of evidence, 4.

Open Bristow Versus Open Latarjet for Anterior Shoulder Instability in Rugby Players: Radiological and Clinical Outcomes

Background:

Coracoid transfer is a reliable method for managing anterior shoulder instability in athletes who play contact sports; however, differences between the Bristow and Latarjet procedures are unclear.

Purpose:

To compare clinical outcomes and rates of bone union and bone resorption of the coracoid process between the open Bristow and open Latarjet procedures in rugby players.

Study Design:

Cohort study; Level of evidence, 3.

Methods:

Rugby players who underwent an open Bristow or an open Latarjet procedure were retrospectively reviewed for anterior shoulder instability, and 66 shoulders in the Bristow group and 35 in the Latarjet group were included. Graft union and resorption were evaluated using computed tomography at 3 months to 1 year postoperatively. Patient-reported outcome measures (American Shoulder and Elbow Surgeons score, Rowe score, and satisfaction rate) were obtained at a mean follow-up of 74 months (range, 45-160 months) for Bristow and 64 months (range, 50-76 months) for Latarjet procedures. Recurrence and the rate of return to play (RTP), frequency of pain after RTP, and retirement rate after RTP were also assessed.

Results:

In 97.1% of the Latarjet procedure cases, bone union of the coracoid was achieved at 3 months postoperatively; however, bone union was achieved in only 72.7% of the Bristow procedure cases at 6 months postoperatively. Bone resorption of the coracoid process occurred in 6.1% of shoulders after the Bristow procedure, whereas 100% of shoulders showed bone resorption after the Latarjet procedure. No statistical differences were found in outcome scores between the 2 procedures. Subluxation and persistent pain after returning to sports were identified at a significantly higher rate in the Latarjet group (5 shoulders [14%] and 9 shoulders [26%], respectively) than in the Bristow group (2 shoulders [3%] and 2 shoulders [3%]) (P = .0471 and P = .001, respectively).

Conclusion:

The Latarjet procedure had an advantage in the early and high rate of bone union but was at a disadvantage in bone resorption compared with the Bristow procedure. Subluxation and pain after returning to sports were more frequent in patients who underwent the open Latarjet procedure than in those who underwent the open Bristow procedure.

Clinical and Radiographic Outcomes After Arthroscopic Inlay Bristow Surgery With Screw Versus Suture Button Fixation: A Comparative Study of 117 Patients With 3.3-Year Follow-up

Background:

Some studies have advocated the use of suture button fixation during Bristow-Latarjet surgery to reduce complications associated with screw fixation. However, data comparing these fixation methods are relatively incomplete.

Purpose:

To investigate the efficacy of modified arthroscopic Bristow-Latarjet surgery and compare the clinical and radiographic outcomes using screw versus suture button fixation.

Study Design:

Cohort study; Level of evidence, 3.

Methods:

We evaluated 136 patients with traumatic anterior shoulder instability who underwent the modified arthroscopic Bristow-Latarjet surgery between June 2015 and February 2018. Of these patients, 117 who met the inclusion criteria were enrolled at a mean follow-up of 3.3 ± 0.7 years. Shoulders were separated into 2 groups based on fixation technique: screw fixation (group A; n = 63) or suture button fixation (group B; n = 54). Computed tomography imaging findings and clinical results were assessed preoperatively; immediately after operation; and postoperatively at 3 months, 6 months, 1 year, and final follow-up.

Results:

There were no significant differences between the groups in terms of postoperative clinical scores, the level of return to sports, range of motion, graft position, or reoperation rates. Bone healing was observed in 97.4% of the cases overall (114/117), with 98.4% bone union in group A and 96.3% in group B at final follow-up. Bone absorption was more common in group A (n = 30; 47.6%) compared with group B (n = 10; 18.5%) (P = .003). There were no hardware-related complications in group B, compared with 7.9% of patients in group A (P = .034). One patient in group B had a recurrent dislocation due to an unexpected event, and there were no recurrent dislocations in group A.

Conclusion:

After the modified arthroscopic Bristow-Latarjet procedure, both suture button and screw fixation methods demonstrated high bony healing rates and low risk of recurrence. Less coracoid graft resorption and no hardware-related complications were seen with suture button fixation.

Latarjet After Failed Arthroscopic Bankart Repair Results in Twice the Rate of Recurrent Instability Compared With Primary Latarjet

PURPOSE

To assess recurrent instability of the shoulder following open Latarjet performed as the primary stabilization procedure or as a salvage procedure.

METHODS

A retrospective, comparative cohort study was performed for a consecutive series of patients in the Military Health System who underwent open Latarjet from January 1, 2010, to December 31, 2018. All patients were diagnosed with recurrent anterior shoulder instability and had a minimum of 2 years of postoperative follow-up. Patients were categorized as either having a primary Latarjet (PL; no prior shoulder stabilization procedure) or salvage Latarjet (SL; ≥1 previous arthroscopic surgical stabilization procedures).

RESULTS

A total of 234 Latarjet procedures were performed in 234 patients. The overall recurrent instability rate was 15.8% (37/234), the overall reoperation rate was 16.7% (36/234), and the overall complication rate was 14.2% (33/234) over a mean 5.0 years of follow-up. There were 99 PL procedures and 135 SL procedures. The SL group had significantly more recurrent instability than the PL group (SL 28/135, 20.7%; PL 9/99, 9.1%; P = .0158). There was no difference in overall reoperation rates (SL 26/135, 19.3%; PL 13/99, 13.1%; P = .2140) or complication rates (SL 20/135, 14.8%; PL 13/99, 13.3%; P = .9101).

CONCLUSION

The rate of recurrent instability following the Latarjet procedure in an active, high-risk population is 15.8%. Primary Latarjet was found to have lower rates of recurrence compared with salvage Latarjet procedures (9.1% versus 20.7%).

LEVEL OF EVIDENCE

III.

[An arthroscopic "inlay" Bristow procedure with suture button fixation: Surgical technique and radiology evaluation]

OBJECTIVE

To introduce an arthroscopic "inlay" Bristow procedure based on the Mortise-Tenon joint structure concept using suture button fixation, and to evaluate its clinical and radiology results postoperatively with a minimal 3-year follow-up.

METHODS

A total of 56 patients who received arthroscopic "inlay" Bristow procedure with suture button fixation between June 2015 to June 2016 were eventually enrolled in this study. Radiological assessment on the 3D CT scan was performed preoperatively, immediately after operation, and postoperatively at the end of 3 months, 6 months and the final follow-up. Complications postoperatively were also recorded.

RESULTS

A total of 56 patients were finally included in this study. The mean follow-up time was (36.1±3.7) months. Coracoid grafts (middle point) were positioned at about 4 o'clock (123.8°±12.3°) in the En-face view. In the axial view, 95% (53/56) of the grafts positioning were measured as flush, 5% (3/56) as medial. Bone union rate was 96.4% at the final follow-up. At the end of 3 months, 6 months, and the final follow-up, the length of the coracoid graft was 96.9%±4.9%, 91.9%±6.2%, and 91.6%±6.6% of the immediate postoperative length, respectively. Compared with the immediate postoperative length, the length measured at the end of 3 months shortened not significantly (t=2.12, P > 0.05). The coracoid graft shortened more pronouncedly 6 months postoperatively (t=4.98, P < 0.05) and then remained almost constant over time (t=-0.75, P > 0.05), with all grafted coracoid graft retaining more than 90% of their initial length by the 3-year follow-up. And new bone formation at the junction between the coracoid graft and glenoid neck in the axial view were obviously noted in 25 cases. The quantitative evaluation showed that the glenoid area in En-face view was significantly increased at the final follow-up than that immediately after surgery [(9.72±1.22) cm² vs. (9.42±1.11) cm²]. No degenerative changes were noted on CT images in all the patients at the final follow-up.

CONCLUSION

This study reported a series of "inlay" Bristow procedure with suture button fixation for recurrent shoulder dislocation, providing satisfactory union rate and excellent graft positioning. And using suture button fixation instead of screw can reduce osteolysis and complications related to hardware implantation. Moreover, the bone remodeling between the coracoid process and glenoid could be beneficial to restoring the anterior stability of shoulder joint in a long term follow-up.

Intra-articular biomechanical environment following modified Bristow and Latarjet procedures in shoulders with large glenoid defects: relationship with postoperative complications

BACKGROUND

Although coracoid transfers including the modified Bristow and Latarjet procedures are widely used to treat anterior shoulder instability, the influence of the choice of procedure on the biomechanical outcomes is not well characterized. We aimed to clarify the intra-articular stress distribution following these 2 procedures using 3-dimensional finite-element analysis and to investigate the role of stress distribution in the pathophysiology of postoperative complications.

METHODS

Overall, 6 male patients aged 17-47 years with unilateral anterior shoulder instability were recruited. Computed tomographic digital imaging and communications in medicine (CT-DICOM) data of the contralateral (healthy) shoulder of each patient was obtained and used for developing the 3-dimensional normal glenohumeral joint model. A 25% bony defect was created in the anterior glenoid rim where the coracoid process was transferred in the standing and lying-down positions to create the Bristow and Latarjet models, respectively. The arm position was set as 0° or 90° abduction. The Young moduli of the humerus and scapula were calculated using CT data, and set as 35.0 MPa and 113.8 GPa for the articular cartilage and inserted screw, respectively. A compressive load (50 N) was applied to the greater tuberosity toward the center of the glenoid, and a tensile load (20 N) was applied to the tip of the coracoid in the direction of conjoint tendon. Elastic analysis was used to determine the equivalent stress distribution.

RESULTS

A significant reduction in mean equivalent stress was observed within the glenoid cartilage for both models (P = .031); however, a new stress concentration appeared within the grafted coracoid-facing region of the humeral-head cartilage in both models. The proximal half of the coracoid graft exhibited lower equivalent stress than the distal half in 5 of the 6 Latarjet models, whereas the proximal half showed higher equivalent stress than the distal half in all 6 Bristow models. High stress concentration was identified at the midpoint of the inserted screw in Bristow models.

DISCUSSION AND CONCLUSIONS

Intra-articular stress distribution may explain the different rates of postoperative complications associated with the modified Bristow and Latarjet procedures. New stress concentration within the humeral-head cartilage might contribute to the development of glenohumeral osteoarthritis following both procedures. Stress shielding in the proximal part of the coracoid graft might contribute to osteolysis following the Latarjet procedure. Surgeons should be aware of the risk of breakage of the inserted screw following the modified Bristow procedure.

Traditional versus congruent-arc Latarjet anatomic and biomechanical perspective

The congruent-arc Latarjet (CAL) allows reconstruction of a greater percentage of glenoid bone deficit because the inferior surface of the coracoid is wider than the lateral edge of the coracoid used with the traditional Latarjet (TL).

Biomechanical studies have shown higher initial fixation strength between the graft and the glenoid with the TL.

In the TL, the undersurface of the coracoid, which is wider than the medial edge used with the CAL, remains in contact with the anterior edge of the glenoid, increasing the contact surface between both bones and thus facilitating bone consolidation.

The shorter bone distance around the screw with the CAL is potentially less tolerant of screw-positioning error compared to the TL. Moreover, the wall of the screw tunnel is potentially more likely to fracture with the CAL due to the minimal space between the screw and the graft wall.

CAL may be very difficult to perform in patients with very small coracoids such as small women or skeletally immature patients.

Radius of curvature of the inferior face of the coracoid graft (used with the CAL) is similar to that of the native glenoid. This may potentially decrease contact pressure across the glenohumeral joint, avoiding degenerative changes in the long term.

Cite this article: EFORT Open Rev 2021;6:280-287. DOI: 10.1302/2058-5241.6.200074

Glenoid Bone Loss Is a Risk Factor for Poor Clinical Results After Coracoid Transfer in Rugby Players With Shoulder Dislocations

Background:

Although surgical shoulder stabilization via coracoid transfer in collision athletes is effective and has a low reinjury rate, the factors affecting poor clinical results and the superiority of the 2 stabilization procedures (Bristow and Latarjet) remain unclear.

Purpose:

To explore the factor(s) affecting poor clinical results of coracoid transfer in a large cohort of rugby players and to compare postoperative function between the Bristow and Latarjet procedures.

Study Design:

Cohort study; Level of evidence, 3.

Methods:

This study included 169 consecutive shoulders of 154 competitive male rugby players who underwent shoulder stabilization surgery (Bankart repair with coracoid transfer) between 2014 and 2018 and had a mean follow-up of 2.7 years (minimum follow-up, 2 years). The Bristow procedure was performed in the first 92 shoulders (84 players), and the Latarjet procedure was performed in the latter 77 shoulders (70 players). A poor clinical result was defined as a postoperative Rowe score of <70 and a postoperative Western Ontario Shoulder Instability Index (WOSI) score of >630. Multiple logistic regression analysis was conducted to identify the factors affecting postoperative functional failure. The postoperative scores and complication rates were also compared between the 2 procedures.

Results:

In total, 92.3% of the rugby players returned to their preinjury competition level at a mean of 5.9 months postoperatively. The Rowe and WOSI scores showed that shoulder function was improved postoperatively compared with preoperatively. The number of rugby players with a poor clinical result was 18 (10.7%). Multiple logistic regression analysis demonstrated that a poor clinical result was associated with a preoperative glenoid bone defect of >20% of the glenoid width (odds ratio, 9.8), whereas the clinical result was unaffected by the type of coracoid transfer. There were no differences between the 2 procedures in any of the postoperative scores or complication rates.

Conclusion:

The present study indicated that the most effective predictor of postoperative functional scores was the degree of the glenoid bone defect and not the type of coracoid transfer. This information may be useful for the strategic treatment of shoulder dislocations in collision athletes.

Cuistow: Chinese Unique Inlay Bristow: A Novel Arthroscopic Surgical Procedure for Treatment of Recurrent Anterior Shoulder Instability with a Minimum 3-Year Follow-Up

BACKGROUND

The prevalence of nonunion after the Latarjet procedure remains high. The purpose of the present study was to investigate healing and clinical outcomes after a novel arthroscopic coracoid process transfer procedure.

METHODS

Sixty-three patients who underwent the arthroscopic inlay Bristow procedure combined with Bankart repair were identified, and 51 patients who met the inclusion criteria were enrolled in this study. The key feature of this technique was that the coracoid process was trimmed and fixed into a trough (5 to 10 mm deep) in the glenoid neck with a metal screw. Bone graft union and positioning accuracy were assessed with use of postoperative computed tomography (CT) imaging. Clinical examinations, return to sport, and functional scores (American Shoulder and Elbow Surgeons [ASES] and Rowe scores) were recorded.

RESULTS

The mean duration of follow-up (and standard deviation) was 41.5 ± 7.7 months (range, 36 to 48 months). Postoperative CT scans showed that the position of coracoid graft was at 4:10 (from 3:50 to 5:00) (referencing the right shoulder) in the sagittal view. The α angle was 16.4° ± 9.5°, with 4 (7.8%) of 51 screws being over-angulated (α > 25°). On the axial view, the graft position was considered to be flush in 33 patients (64.7%), medial in 11 (21.6%), congruent in 7 (13.7%), and lateral or too medial in none. At 1 year, the coracoid graft had healed in 49 patients (96.1%) and had failed to unite in 2 patients. CT scanning, performed for 47 patients, showed grade-0 osteolysis in 9 patients, grade-1 osteolysis in 21 patients, and grade-2 osteolysis in 17 patients. At the time of the latest follow-up, there was a significant increase in the Rowe score (from 35.5 ± 8.3 to 95.7 ± 7.2) and the ASES score (from 71.2 ± 9.7 to 91.5 ± 4.4), and 87.0% of patients were able to return to sport. No arthropathy was observed in any patient.

CONCLUSIONS

After a minimum 3-year follow-up, the arthroscopic inlay Bristow procedure resulted in a high rate of graft healing, excellent clinical outcomes, and a high rate of return to sports.

LEVEL OF EVIDENCE

Therapeutic Level IV. See Instructions for Authors for a complete description of levels of evidence.

An Arthroscopic "Inlay" Bristow Procedure With Suture Button Fixation for the Treatment of Recurrent Anterior Glenohumeral Instability: 3-Year Follow-up

BACKGROUND

Coracoid graft positioning, fixation, and bone union are key factors affecting the clinical outcomes of Bristow and Latarjet procedures. We developed an arthroscopic "inlay" Bristow procedure based on the "mortise-tenon" joint structure concept using suture button fixation to achieve more stable fixation and better bone union of the graft.

PURPOSE

To evaluate the positioning of the coracoid graft, bone union rate, and clinical outcomes of this arthroscopic inlay Bristow procedure with suture button fixation.

STUDY DESIGN

Case series; Level of evidence, 4.

METHODS

A total of 62 patients who received the arthroscopic inlay Bristow procedure with suture button fixation between June 2015 to June 2016 were eligible for inclusion, and 56 patients who met the inclusion criteria were enrolled in this study. Radiological assessment on 3-dimensional computed tomography scan was performed preoperatively, immediately after the operation, and postoperatively at 3 months, 6 months, 1 year, and the final follow-up. Pre- and postoperative clinical results were also assessed.

RESULTS

A total of 56 patients were included in this study. The mean ± SD follow-up time was 36.1 ± 3.7 months. Coracoid grafts (middle point) were positioned at 4 o'clock (range, 123.8°± 12.3°) in the sagittal view. In the axial view, 94.6% (53/56) of the graft positioning was measured as flush and 5.4% (3/56) as medial. Neither lateral nor too medial positioning was noted. The bone union rate was 96.4% at final follow-up. The mean visual analog scale score for pain during motion, American Shoulder and Elbow Surgeons score, and Rowe score all improved significantly after surgery-from 4.8 ± 2.6 to 1.1 ± 1.0, 69.2 ± 12.5 to 92.5 ± 7.0, and 33.5 ± 12.1 to 96.0 ± 4.9 at last follow-up, respectively. Almost all patients (98%; 55/56) returned to sports within 1 year after surgery at the same or higher level as compared with their preinjury performance. The mean subjective value for sports participation was 90.3% ± 7.1% (range, 70%-100%) as compared with the normal shoulder. The overall complication rate was 3.6%. No degenerative changes were noted in any patients.

CONCLUSION

This study reported the first series of an inlay Bristow procedure with suture button fixation for recurrent shoulder dislocation, providing a satisfactory union rate and excellent graft positioning with a low complication rate. The mortise-tenon joint structure can provide excellent graft fixation and healing, while using suture button fixation instead of screw fixation could reduce osteolysis and complications related to hardware implantation.

When to Abandon the Arthroscopic Bankart Repair: A Systematic Review

CONTEXT

Bone loss is a major factor in determining surgical choice in patients with anterior glenohumeral instability. Although bone loss has been described, there is no consensus on glenoid, humeral head, and bipolar bone loss limits for which arthroscopic-only management with Bankart repair can be performed.

OBJECTIVE

To provide guidelines for selecting a more complex repair or reconstruction (in lieu of arthroscopic-only Bankart repair) in the setting of glenohumeral instability based on available literature.

DATA SOURCES

An electronic search of the literature for the period from 2000 to 2019 was performed using PubMed (MEDLINE).

STUDY SELECTION

Studies were included if they quantified bone loss (humeral head or glenoid) in the setting of anterior instability treated with arthroscopic Bankart repair.

STUDY DESIGN

Systematic review.

LEVEL OF EVIDENCE

Level 4.

DATA EXTRACTION

Study design, level of evidence, patient demographics, follow-up, recurrence rates, and measures of bone loss (glenoid, humeral head, bipolar).

RESULTS

A total of 14 studies met the inclusion criteria. Of these, 10 measured glenoid bone loss, 5 measured humeral head bone loss, and 2 measured "tracking" without explicit measurement of humeral head bone loss. Measurement techniques for glenoid and humeral head bone loss varied widely. Recommendations for maximum glenoid bone loss for arthroscopic repair were largely <15% of glenoid width in recent studies. Recommendations regarding humeral head loss were more variable (many authors providing only qualitative descriptions) with increasing attention on glenohumeral tracking.

CONCLUSION

It is essential that a standardized method of glenoid and humeral head bone loss measurements be performed preoperatively to assess which patients will have successful stabilization after arthroscopic Bankart repair. Glenoid bone loss should be <15%, and humeral head lesions should be "on track" if an arthroscopic-only Bankart is planned. If there is greater bone loss, adjunct or open procedures should be performed.

Are Patients Who Undergo the Latarjet Procedure Ready to Return to Play at 6 Months? A Multicenter Orthopaedic Outcomes Network (MOON) Shoulder Group Cohort Study

BACKGROUND

The Latarjet procedure is growing in popularity for treating athletes with recurrent anterior shoulder instability, largely because of the high recurrence rate of arthroscopic stabilization, particularly among contact athletes with bone loss.

PURPOSE

(1) To evaluate return of strength and range of motion (ROM) 6 months after the Latarjet procedure and (2) to determine risk factors for failure to achieve return-to-play (RTP) criteria at 6 months.

STUDY DESIGN

Case-control study; Level of evidence, 3.

METHODS

A total of 65 athletes (83% contact sports, 37% overhead sports; mean ± SD age, 24.5 ± 8.2 years; 59 male, 6 female) who enrolled in a prospective multicenter study underwent the Latarjet procedure for anterior instability (29% as primary procedure for instability, 71% for failed prior stabilization procedure). Strength and ROM were assessed preoperatively and 6 months after surgery. RTP criteria were defined as return to baseline strength and <20° side-to-side ROM deficits in all planes. The independent likelihood of achieving strength and motion RTP criteria at 6 months was assessed through multivariate logistic regression modeling with adjustment as needed for age, sex, subscapularis split versus tenotomy, preoperative strength/motion, percentage bone loss, number of prior dislocations, preoperative subjective shoulder function (American Shoulder and Elbow Surgeons and Western Ontario Shoulder Instability Index percentage), and participation in contact versus overhead sports.

RESULTS

Of the patients, 55% failed to meet ≥1 RTP criteria: 6% failed for persistent weakness and 51% for ≥20° side-to-side loss of motion. There was no difference in failure to achieve RTP criteria at 6 months between subscapularis split (57%) versus tenotomy (47%) (P = .49). Independent risk factors for failure to achieve either strength or ROM criteria were preoperative American Shoulder and Elbow Surgeons scores (per 10-point decrease: adjusted odds ratio [aOR], 1.61; 95% CI, 1.14-2.43; P = .006), Western Ontario Shoulder Instability Index percentage (per 10% decrease: aOR, 0.61; 95% CI, 0.38-0.92; P = .01), and a preoperative side-to-side ROM deficit ≥20° in any plane (aOR, 5.01; 95% CI, 1.42-21.5; P = .01) or deficits in external rotation at 90° of abduction (per 10° increased deficit: aOR, 1.64; 95% CI, 1.06-2.88; P = .02).

CONCLUSION

A large percentage of athletes fail to achieve full strength and ROM 6 months after the Latarjet procedure. Greater preoperative stiffness and subjective disability are risk factors for failure to meet ROM or strength RTP criteria.

Outcomes After Latarjet Procedure: Patients With First-Time Versus Recurrent Dislocations

BACKGROUND

The preoperative number of dislocations has been previously proved to be a major factor influencing the results after Bankart repair with more preoperative dislocations correlated with higher recurrence rates and more reoperations. This could possibly be because of the lower quality of the tissue repaired during the procedure after multiple dislocations. On the other hand, the Latarjet procedure does not "repair" but rather reconstructs and augments the anterior glenoid.

PURPOSE/HYPOTHESIS

The main objective was to report the clinical outcomes of patients undergoing a Latarjet procedure after 1 dislocation versus multiple (≥2) dislocations. The hypothesis was that the preoperative number of dislocations would not influence clinical results.

STUDY DESIGN

Cohort study; Level of evidence, 3.

METHODS

Patients older than 18 years who had undergone a primary Latarjet procedure for shoulder instability with at least 2 years of follow-up were included. Three different techniques were used: a mini-open technique using 2 screws, an arthroscopic technique using 2 screws, and an arthroscopic technique using 2 cortical buttons. Patients were evaluated and answered a questionnaire to assess the number of episodes of dislocation before surgery, the time between the first dislocation and surgery, recurrence of the dislocation, revision surgery, the Walch-Duplay score, the Simple Shoulder Test score, and the visual analog scale (VAS) score for pain.

RESULTS

A total of 308 patients were included for analysis with a mean follow-up of 3.4 ± 0.8 years. Of that, 83 patients were included in the first-time dislocation group and 225 in the recurrent dislocation group. At last follow-up, the rates of recurrence and reoperation were not significantly different between groups: 4.8% in the first-time dislocation group versus 3.65% in the recurrent dislocation group and 6.1% versus 4.0%, respectively. The overall Walch-Duplay scores at last follow-up were also comparable between the 2 groups, 67.3 ± 24.85 and 71.8 ± 25.1, even though the first-time dislocation group showed a lower pain subscore (15.0 ± 8.6 vs 18.0 ± 7.5; P = .003). The VAS for pain was also significantly higher in the first-time dislocation group compared with the recurrent dislocation group (1.8 ± 2.3 vs 1.2 ± 1.7; P = .03).

CONCLUSION

The number of episodes of dislocation before surgery does not affect postoperative instability rates and reoperation rates after the Latarjet procedure. However, patients with first-time dislocations had more postoperative pain compared with patients with recurrent dislocations before surgery.

Arthroscopic Bristow: Assessments of Safety and Effectiveness, 12 Years of Experience

Objective  The open Bristow procedure is a long established and effective method for treating anterior shoulder instability. Following the trends of minimally-invasive surgeries, these procedures were performed arthroscopically, and their outcomes were evaluated.

Methods  A total of 43 shoulders of patients submitted to Bristow procedures by arthroscopy, using a graft positioned horizontally and a screw, with at least two years of postoperative follow-up, were evaluated regarding quality of life, de novo dislocation index, and loss of lateral rotation.

Results  The mean follow-up time was of 76 months (range: 129 to 24 months). The University of California at Los Angeles (UCLA) score varied from 25.56 ± 0.50 (standard deviation [SD] = 3.25) to 33.23 ± 0.44 (SD = 2.91) ( p  < 0.0001). Two or more years after surgery, the mean Rowe score was of 94.25 ± 1.52 (SD = 1.34), whereas the good results standard is 75 ( p  < 0.0001). The mean value for the simple shoulder test was of 11.35 ± 0.21 (SD = 1.34), while the mean value of the lateral rotation loss was of 10.37° ± 1.36° (SD = 8.58°). There were no de novo dislocations.

In total, there were 12 complications, 8 of which had no clinical repercussions. The clinically-significant complications included an infection six months after surgery with a potential hematogenous origin, a coracoid fracture that required an intraoperatively procedure change, and two patients with previous impingement who required synthesis material removal more than six months after surgery.

Conclusion  Although the arthroscopic Bristow procedure was effective in treating anterior shoulder instability, it is not a complication-free surgery.

The Long Head of the Biceps Bristow-Bankart Procedure for Anterior Shoulder Instability

Surgical procedures to treat anterior shoulder instability are basically split into 2 groups: those for patients with important bone loss and those for patients with no bone loss. However, there is a gray zone between these procedures in which a bone graft would not be needed but bone grafting would result in a desirable improvement in stabilizing mechanisms. We describe a technique based on the triple soft-tissue block, Bankart reconstruction, and long head of the biceps tenodesis at the anterior glenoid rim. The long head of the biceps would add an anterior restrictor by itself, as well as by tensioning the inferior part of the subscapularis.