An experimental animal model of aseptic loosening of hip prostheses in sheep to study early biochemical changes at the interface membrane

A Novel Rat Model to Study Postsurgical Pain After Joint Replacement Surgery

Purpose

The mechanisms underlying chronic postsurgical pain after joint replacement (JR) are complex, and it has been suggested that chronic postsurgical pain can develop as a result of inadequate acute pain management. Few studies have addressed acute pain after JR using specific animal models. This study aimed to develop a novel JR model focused on postsurgical pain assessment and the time course of pain recovery.

Materials and Methods

Rats were allocated to the following three groups: sham (joint exposure), joint destruction (JD; resection of the femoral head), and JR (femoral head replacement using an originally developed implant). The time course of postsurgical pain behavior was measured using a dynamic weight-bearing apparatus, along with radiological assessments. The expression of calcitonin gene-related peptide-immunoreactive (CGRP-IR) neurons in the dorsal root ganglion (DRG) was evaluated by immunohistochemistry on days 28 and 42.

Results

The ratio of weight-bearing distribution in the JR group gradually recovered from day 14 and reached the same level as that in the sham group on day 42, which was significantly greater than that in the JD group after day 7 (p<0.05). Radiologically, no significant issues were found, except for transient central migration of the implant in the JR group. The percentage of CGRP-IR DRG neurons in the JR group was significantly lower than that in the JD group on day 28 (mean, 37.4 vs 58.1%, p<0.05) and day 42 (mean, 32.3 vs 50.0%, p<0.05).

Conclusion

Our novel JR model presented acute postsurgical pain behavior that was successfully recovered to the baseline level at day 42 after surgery. Difference of the pain manifestation between the JR and JD groups could be supported by the expression of CGRP-IR in DRG neurons. This model is the first step toward understanding detailed mechanisms of post-JR pain.

Image-based design and 3D-metal printing of a rat hip implant for use in a clinically representative model of joint replacement

The aim of this study was to obtain micro-computed tomography derived measurements of the rat proximal femur, to create parameterized rat hip implants that could be surgically installed in a clinically representative small animal model of joint replacement. The proximal femoral anatomy of N = 25 rats (male, Sprague-Dawley, 390-605 g) was quantified. Key measurements were used to parameterize computer-aided design models of monoblock rat femoral implants. Linear regression analysis was used to determine if rat hip dimensions could be predicted from animal weight. A correlation analysis was used to determine how implants could be scaled to create a range of sizes. Additive manufacturing (3D printing) was used to create implants in medical-grade metal alloys. Linear regressions comparing rat weight to femoral head diameter and neck-head axis length revealed a significant nonzero slope (P < .05). Pearson's correlation analysis revealed five significant correlations between key measurements in the rat femur (P < .05). Implants were installed into both cadaveric and live animals; iterative design modifications were made to prototypes based on these surgical findings. Animals were able to tolerate the installation of implants and were observed ambulating on their affected limbs postoperatively. Clinical significance: We have developed a preclinical rat hip hemiarthroplasty model using image-based and iterative design techniques to create 3D-metal printed implants in medical-grade metal alloys. Our findings support further development of this model for use as a low-cost translational test platform for preclinical orthopaedic research into areas such as osseointegration, metal-on-cartilage wear, and periprosthetic joint infection.

Periprosthetic Osteolysis: Mechanisms, Prevention and Treatment

Clinical studies, as well as in vitro and in vivo experiments have demonstrated that byproducts from joint replacements induce an inflammatory reaction that can result in periprosthetic osteolysis (PPOL) and aseptic loosening (AL). Particle-stimulated macrophages and other cells release cytokines, chemokines, and other pro-inflammatory substances that perpetuate chronic inflammation, induce osteoclastic bone resorption and suppress bone formation. Differentiation, maturation, activation, and survival of osteoclasts at the bone-implant interface are under the control of the receptor activator of nuclear factor kappa-Β ligand (RANKL)-dependent pathways, and the transcription factors like nuclear factor κB (NF-κB) and activator protein-1 (AP-1). Mechanical factors such as prosthetic micromotion and oscillations in fluid pressures also contribute to PPOL. The treatment for progressive PPOL is only surgical. In order to mitigate ongoing loss of host bone, a number of non-operative approaches have been proposed. However, except for the use of bisphosphonates in selected cases, none are evidence based. To date, the most successful and effective approach to preventing PPOL is usage of wear-resistant bearing couples in combination with advanced implant designs, reducing the load of metallic and polymer particles. These innovations have significantly decreased the revision rate due to AL and PPOL in the last decade.

Micrometer-Sized Titanium Particles Induce Aseptic Loosening in Rabbit Knee

Wear debris induced aseptic loosening is the leading cause of total knee arthroplasty (TKA) failure. The complex mechanism of aseptic loosening has been a major issue for introducing effective prevention and treatment methods, so a simplified yet efficient rabbit model was established to address this concern with the use of micrometer-sized titanium particles. 20 New Zealand white rabbits were selected and divided into two groups (control = 10, study = 10). A TKA surgery was then performed for each of them, with implantation of a titanium rod prosthesis which was coated evenly with micrometer-sized titanium in the study group and nothing in the control group, into right femoral medullary cavity. After 12 weeks, all the animals were euthanized and X-ray analyses, H&E staining, Goldner Masson trichrome staining, Von Kossa staining, PCR, and Western blotting of some specific mRNAs and proteins in the interface membrane tissues around the prosthesis were carried out. The implantation of a titanium rod prosthesis coated with 20 μm titanium particles into the femoral medullary cavity of rabbits caused continuous titanium particle stimulation around the prosthesis, effectively inducing osteolysis and aseptic loosening. Titanium particle-induced macrophages produce multiple inflammatory factors able to activate osteoclast differentiation through the OPG/RANKL/RANK signaling pathway, resulting in osteolysis while suppressing the function of osteoblasts and reducing bone ingrowth around the prosthesis. This model simulated the implantation and loosening process of an artificial prosthesis, which is an ideal etiological model to study the aseptic prosthetic loosening.

Fabrication of Titanium-Niobium-Zirconium-Tantalium Alloy (TNZT) Bioimplant Components with Controllable Porosity by Spark Plasma Sintering

Spark Plasma Sintering (SPS) is used to fabricate Titanium-Niobium-Zirconium-Tantalum alloy (TNZT) powder-based bioimplant components with controllable porosity. The developed densification maps show the effects of final SPS temperature, pressure, holding time, and initial particle size on final sample relative density. Correlations between the final sample density and mechanical properties of the fabricated TNZT components are also investigated and microstructural analysis of the processed material is conducted. A densification model is proposed and used to calculate the TNZT alloy creep activation energy. The obtained experimental data can be utilized for the optimized fabrication of TNZT components with specific microstructural and mechanical properties suitable for biomedical applications.

Osteolysis around total knee arthroplasty: a review of pathogenetic mechanisms

Aseptic loosening and other wear-related complications are some of the most frequent late reasons for revision of total knee arthroplasty (TKA). Periprosthetic osteolysis (PPOL) pre-dates aseptic loosening in many cases, indicating the clinical significance of this pathogenic mechanism. A variety of implant-, surgery- and host-related factors have been delineated to explain the development of PPOL. These factors influence the development of PPOL because of changes in mechanical stresses within the vicinity of the prosthetic device, excessive wear of the polyethylene liner, and joint fluid pressure and flow acting on the peri-implant bone. The process of aseptic loosening is initially governed by factors such as implant/limb alignment, device fixation quality and muscle coordination/strength. Later, large numbers of wear particles detached from TKA trigger and perpetuate particle disease, as highlighted by progressive growth of inflammatory/granulomatous tissue around the joint cavity. An increased accumulation of osteoclasts at the bone-implant interface, impairment of osteoblast function, mechanical stresses and increased production of joint fluid contribute to bone resorption and subsequent loosening of the implant. In addition, hypersensitivity and adverse reactions to metal debris may contribute to aseptic TKA failure, but should be determined more precisely. Patient activity level appears to be the most important factor when the long-term development of PPOL is considered. Surgical technique, implant design and material factors are the most important preventative factors, because they influence both the generation of wear debris and excessive mechanical stresses. New generations of bearing surfaces and designs for TKA should carefully address these important issues in extensive preclinical studies. Currently, there is little evidence that PPOL can be prevented by pharmacological intervention.

Particle disease: biologic mechanisms of periprosthetic osteolysis in total hip arthroplasty

Numerous studies provide detailed insight into the triggering and amplification mechanisms of the inflammatory response associated with prosthetic wear particles, promoting final dominance of bone resorption over bone formation in multiple bone multicellular units around an implant. In fact, inflammation is a highly regulated process tightly linked to simultaneous stimulation of tissue protective and regenerative mechanisms in order to prevent collateral damage of periprosthetic tissues. A variety of cytokines, chemokines, hormones and specific cell populations, including macrophages, dendritic and stem cells, attempt to balance tissue architecture and minimize inflammation. Based on this fact, we postulate that the local tissue homeostatic mechanisms more effectively regulate the pro-inflammatory/pro-osteolytic cells/pathways in patients with none/mild periprosthetic osteolysis (PPOL) than in patients with severe PPOL. In this line of thinking, 'particle disease theory' can be understood, at least partially, in terms of the failure of local tissue homeostatic mechanisms. As a result, we envision focusing current research on homeostatic mechanisms in addition to traditional efforts to elucidate details of pro-inflammatory/pro-osteolytic pathways. We believe this approach could open new avenues for research and potential therapeutic strategies.

Structure-process-functional property relationship of nanostructured carbon mediated cellular response for soft-tissue reconstruction and replacement

The flexible and ductile silicone is widely used as a soft-tissue substitute for joint reconstruction and replacement in situations including joint pain and loss of mobility caused by the congenital or acquired factors such as osteoarthritis. Although these artificial devices have an expected life span of 15 years or more, they can fragment prematurely. Explanations for such failure are low tensile strength and inadequate bone build-up around the device, as a result of which the device does not bind with the surrounding tissues. Thus, the continued challenge for materials in contact with the bone is the design of high-strength-at-break silicone with the ability to modulate cell-substrate interactions for promoting osseointegration and long-term stability. To this end, we have discovered exciting evidence that the introduction of a novel nanostructured carbon in the void space between the silicone chains combined with processing at elevated pressure favorably stimulate cellular functions and provide a high degree of cytocompatibility. Furthermore, the high strength-at-break and undiminished intrinsic elongation of silicone are retained. In this regard, we combine here materials science and engineering and cellular biology, to elucidate the mechanism of cell-substrate interactions and the molecular machinery controlling the cell response. This is accomplished by investigating cell attachment, proliferation, and morphology, including cytomorphometric evaluation and quantitative assessment of prominent proteins, actin, vinculin, and fibronectin that are sensitive to cell-substrate interactions. The study strengthens the foundation for utilizing the nano- or quantum-size effects of nanostructured biomaterials.

Biocompatibility issues with modern implants in bone - a review for clinical orthopedics

Skeletal defects may result from traumatic, infectious, congenital or neoplastic processes and are considered to be a challenge for reconstructive surgery. Although the autologous bone graft is still the “gold standard”, there is continuing demand for bone substitutes because of associated disadvantages, such as limited supply and potential donor side morbidity [1]. This is not only true for indications in orthopedic and craniomaxillofacial surgeries, but also in repairing endodontic defects and in dental implantology.

Before clinical use all new bone substitute materials have to be validated for their osseoconductive and - depending on the composition of the material also –inductive ability, as well as for their long-term biocompatibility in bone. Serving this purpose various bone healing models to test osteocompatibility and inflammatory potential of a novel material on one hand and, on the other hand, non-healing osseous defects to assess the healing potential of a bone substitute material have been developed. Sometimes the use of more than one implantation site can be helpful to provide a wide range of information about a new material [2].

Important markers for biocompatibility and inflammatory responses are the cell types appearing after the implantation of foreign material. There, especially the role of foreign body giant cells (FBGC) is discussed controversial in the pertinent literature, such that it is not clear whether their presence marks an incompatibility of the biomaterial, or whether it belongs to a normal degradation behavior of modern, resorbable biomaterials.

This publication is highlighting the different views currently existing about the function of FBGC that appear in response to biomaterials at the implantation sites. A short overview of the general classes of biomaterials, where FBGC may appear as cellular response, is added for clarity, but may not be complete.

Evaluation of an accelerated aging medium for acrylic bone cement based on analysis of nanoindentation measurements on laboratory-prepared and retrieved specimens

The thrust of the study was a critical evaluation of the efficacy of a medium (30% v/v H(2)O(2), at 60 degrees C) that has been suggested in a literature report as being suitable for simulating the oxidative aging process, seen in vivo, in the acrylic bone cement mantles of total hip and knee joint replacements. For this purpose, quasi-static and dynamic nanoindentation measurements were used to obtain material properties--elastic modulus, E; hardness, H; and the variation of the storage and loss moduli with the frequency of the applied indenting force--of PalacosR acrylic bone cement specimens after various periods of immersion (7, 14, 21, and 28 days) in the aging solution, and of specimens prepared from cement mantles retrieved from cemented total hip joint replacements after various times in vivo (0.92-21 years). Also, best-fit relationships were obtained between E and time in the H(2)O(2) solution (t), H and t, E and in vivo time (T), and H and T. This body of results points to the possibility that the aging solution is effective, although the evidence is not conclusive.

Role of free radicals in aseptic loosening of hip arthroplasty

Fibrous pseudocapsule around hip implants is an invariable finding at revision operations and is believed to release inflammatory mediators that stimulate bone resorption. Reactive oxygen species have been proposed to be causative factors in various disorders with tissue fibrosis. We were interested in investigating whether aseptic loosening is connected with high oxidative stress, and in showing the underlying mechanism of periprosthetic fibrosis and its role in loosening. Levels of oxidative stress markers reduced (GSH) and oxidized (GSSG) gluthatione and malondialdehyde (MDA) were assayed in 28 loose hips and in 12 stable hips revised for high rate of wear and osteolysis. Collagen in the periprosthetic tissues was measured as hydroxyproline content. Osteolysis and polyethylene wear were graded. Increased oxidative stress measured by low GSH/GSSG ratio as well as by increased MDA level was established in patients compared to controls. Oxidative stress markers intercorrelated significantly. MDA and both GSH and GSSG levels correlated significantly with hydroxyproline level. Levels of GSSG and MDA were higher in hips with greater polyethylene wear. The results suggest that high oxidative stress may play a role in formation of a fibrous membrane observed at revision of loose hips. The fibrous pseudocapsule is probably related to high intraarticular pressure and expansion of the effective joint space. This study may elicit some aspects of the pathogenesis of aseptic hip loosening and aid in future investigations aiming at prevention of this complication.

Effect of zoledronate on bone quality in the treatment of aseptic loosening of hip arthroplasty in the dog

Periprosthetic bone loss, which is a direct cause of aseptic loosening in total hip arthroplasty (THA), can be suppressed by bisphosphonates. It is unknown how the quality of this bone is affected in the presence of both wear debris (from implant) and bisphosphonates. The objective of this study was to evaluate the effect of zoledronate (ZLN) on bone quality in the presence of wear debris [polyethylene (PE) particles] in a canine model of uncemented THA. Thirty dogs underwent THA, and aseptic loosening was induced via implantation of PE particles packed into the femoral component. For 26 weeks until sacrifice, two groups (each n = 10) received weekly injections of ZLN (low dose 2 mug/kg, high dose 10 mug/kg) and the third group (control) received saline. Histological and radiographic examinations were performed to evaluate the degree of implant reaction. Histomorphometry (static/dynamic) was performed to evaluate bone turnover. Back-scattered electron imaging was used to quantify the newly formed bone and to evaluate the mineralization distribution. Density fractionation and X-ray diffraction were used to evaluate mineral properties, while four-point bending was used to determine mechanical properties. A dose-dependent presence of newly formed subperiosteal bone was found, which appeared to be less mineralized than the adjacent cortical bone. The high-dose ZLN group showed decreased cortical porosity and turnover and increased mineralization profile, failure strength, and modulus. We conclude that ZLN affects some of the material properties of cortical bone and allows the newly formed subperiosteal bone to remain and therefore affect the overall quality of the bone.