Highly sensitive integrated pressure sensor with horizontally oriented carbon nanotube network

A High Sensitive Flexible Pressure Sensor Designed by Silver Nanowires Embedded in Polyimide (AgNW-PI)

Silver nanowires (AgNW) have excellent electrical conductivity, transparency, and flexing endurance, and are broadly used in flexible electrodes and flexible sensors. This study mixed the silver nanowires and polyimide (PI) polymer using an in situ synthesis method, effectively reducing the problem of silver nanowires falling off the substrate. The selective wet etching method was firstly used to process the surface of AgNW-PI films, greatly enhancing the surface conductivity of AgNW-PI films. A flexible pressure sensor with high sensitivity was designed with two face-to-face AgNW-PI ultrathin layers. The experimental results show that our sensor presented a high sensitivity of about 1.3294 kPa⁻¹ under a pressure of about 600 Pa, and when pressure continued to increase, the sensitivity decreased rapidly and reached saturation. Our flexible pressure sensor has the properties of low cost, high sensitivity, excellent repeatability, durability, and can detect various types of mechanical forces which could be utilized for flexible electronics.

An interlocked flexible piezoresistive sensor with 3D micropyramidal structures for electronic skin applications

The development of flexible pressure sensors with human-like sensing capabilities is an emerging field due to their wide range of applications from human robot interactions to wearable electronics. Piezoresistive sensors respond to externally induced mechanical stimuli through changes in their electrical resistance. The current state-of-the-art piezoresistive sensors are mainly constructed via dispersion of conductive nanofillers in an elastomer matrix making their performance strongly reliable on the degree of dispersion. Alternatively, changes in the contact area of conductive elastomers result in higher sensitivity and more tunable variables. Herein, an interlocked sensor comprising two flexible layers of 3D pyramidal microstructures is fabricated with a thin layer of carbon nanotubes deposited onto the micropatterns. The introduced array of micropyramids with varying height and pitch sizes allows for higher changes in the contact area upon applying an external load. The results indicate that the height and pitch of the structures together with a newly defined variable, the critical dimension, affect the sensor's sensitivity. An optimal performance is observed for minimized values of the critical dimension. Furthermore, to verify the obtained results, a finite-element-assisted analytical constriction-resistance model is used to capture the piezoresistive response of the sensor. The theoretical results show the high tracking ability of their experimental counterparts.