Dominant hand, non-dominant hand, or both? The effect of pre-training in hand-eye coordination upon the learning curve of laparoscopic intra-corporeal knot tying

Comparative Evaluation of Laparoscopic Origami Crane Training With 3D and 2D Laparoscopy: Correlation With Fundamentals of Laparoscopic Surgery Scores

Objective. This prospective comparative study evaluated the efficacy and relationship between laparoscopic origami crane training (LOCT) and the Fundamentals of Laparoscopic Surgery (FLS) score using 3D vs 2D laparoscopy.Methods. From 2020 to 2023, fourth-year medical students at Asahikawa Medical University created 20 origami cranes (1 per day) in a laparoscopic dry box. FLS scores were assessed 5 times, corresponding to every fifth crane. Primary outcomes included LOCT production time, quality, and FLS scores, analyzed using the Mann-Whitney U test and repeated-measures ANOVA.Results. Eighteen participants were divided into 2 groups: 8 in the 3D laparoscopy (3D) group and ten in the 2D laparoscopy (2D) group. At the end of the study, the 3D group (16.5 min) produced cranes significantly faster than the 2D group (27 min, P = 0.02). Repeated-measures ANOVA showed that the production time, origami crane score, and FLS score improved over time. The 3D group had a significantly shorter production time (F (1, 16) = 8, P = 0.01). The origami crane score was not significantly different between the groups (F (1, 7) = 3, P = 0.13) but tended to be higher in the 3D group. No significant differences were found in the FLS scores between the groups for any task. A significant negative correlation between LOCT production time and FLS score in both groups confirmed that shorter production time correlated with higher FLS scores.Conclusions. LOCT is effective for extraclinical laparoscopic training and correlates with FLS scores. 3D laparoscopy may help beginners develop depth perception, improve bimanual and hand-eye coordination, and enhance LOCT effectiveness.

Quantitative metrics for evaluating surgical dexterity using virtual reality simulations

This study develops and evaluates quantitative metrics to assess surgical dexterity within virtual reality (VR) simulations to enhance surgical training and performance. By employing advanced VR technology, this research systematically investigates the influence of controlled experimental factors-posture, handedness, and visual magnification-on surgical performance. The impact of human factors such as surgical specialty, experience, and lifestyle factors like sleep and caffeine consumption on surgical dexterity is also analyzed. The findings reveal that seated posture, dominant hand usage, and enhanced visual magnification significantly improve surgical precision and efficiency. Contrary to common beliefs, lifestyle factors such as sleep duration and coffee consumption showed minimal impact on performance metrics. The study highlights the potential of VR simulations to provide a controlled, replicable, and safe environment for surgical training, emphasizing the importance of personalized training protocols that cater to individual surgeon's needs. The insights from this research advocate for integrating quantitative, objective metrics in surgical training programs to refine and accelerate dexterity acquisition, ultimately aiming to improve patient outcomes and surgical care.

Learning surgical knot tying and suturing technique - effects of different forms of training in a controlled randomized trial with dental students

Objective

The acquisition of surgical skills requires motor learning. A special form of this is intermanual transfer by transferring motor skills from the nondominant hand (NDH) to the dominant hand (DH). The purpose of this study was to determine the learning gains that can be achieved for the DH by training with the DH, the NDH, and by non-surgical alternative training (AT).

Methods

124 preclinical (n=62) and clinical (n=62) dental students completed surgical knot tying and suturing technique training with the DH, with the NDH, and an AT in a controlled randomized trial.

Results

A statistically significant learning gain in knot tying and suture technique with the DH was evident only after training with the DH when compared to training with the NDH (p<0.001 and p=0.004, respectively) and an AT (p=0.001 and p=0.010, respectively). Of those students who achieved a learning gain ≥4 OSATS points, 46.4% (n=32) benefited in their knot tying technique with the DH from training with the DH, 29.0% (n=20) from training with the NDH, and 24.6% (n=17) from an AT while 45.7% (n=32) benefited in their suturing technique with the DH from training with the DH, 31.4% (n=22) from training with the NDH, and 22, 9% (n=16) from an AT.

Conclusions

Training with the DH enabled significantly better learning gains in the surgical knot tying and suturing techniques with the DH.

A haptic laparoscopic trainer based on affine velocity analysis: engineering and preliminary results

BACKGROUND

There is a general agreement upon the importance of acquiring laparoscopic skills outside the operation room through simulation-based training. However, high-fidelity simulators are cost-prohibitive and elicit a high cognitive load, while low-fidelity simulators lack effective feedback. This paper describes a low-fidelity simulator bridging the existing gaps with affine velocity as a new assessment variable. Primary validation results are also presented.

METHODS

Psycho-motor skills and engineering key features have been considered e.g. haptic feedback and complementary assessment variables. Seventy-seven participants tested the simulator (17 expert surgeons, 12 intermediates, 28 inexperienced interns, and 20 novices). The content validity was tested with a 10-point Likert scale and the discriminative power by comparing the four groups' performance over two sessions.

RESULTS

Participants rated the simulator positively, from 7.25 to 7.72 out of 10 (mean, 7.57). Experts and intermediates performed faster with fewer errors (collisions) than inexperienced interns and novices. The affine velocity brought additional differentiations, especially between interns and novices.

CONCLUSION

This affordable haptic simulator makes it possible to learn and train laparoscopic techniques. Self-assessment of basic skills was easily performed with slight additional cost compared to low-fidelity simulators. It could be a good trade-off among the products currently used for surgeons' training.

A comparison of laparoscopic procedures performed by novice medical students using 8K ultra-high-definition/two-dimensional and 2K high-definition/three-dimensional monitors

PURPOSE

8K Ultra-high-definition (UHD) imaging has been developed in accordance with the progression of imaging technologies. We evaluated laparoscopic procedures performed by novice medical students using 2K/two-dimensional (2D), 2K/three-dimensional (3D) and 8K/2D monitors, with a particular focus on depth perception.

METHODS

Nine medical students were enrolled. They performed two tasks using 2K/2D, 2K/3D and 8K/2D monitors. In Task 1, they were asked to grasp three metal rods with forceps using each hand. In Task 2, they were asked to grasp a metal rod with forceps held in the right hand, pass the metal rod through a metal ring and transfer it to their left hand.

RESULTS

In Task 1, when performed with the dominant hand, the procedures performed using 2K/3D took a significantly shorter time than those performed using 8K/2D (P = 0.04). However, there was no significant difference among the three groups in the time required for procedures performed by the non-dominant hand. In Task 2, the procedure time with 2K/2D was significantly longer than that with 2K/3D or 8K/2D (P = 0.02).

CONCLUSION

2K/3D showed superior utility to 8K/2D for performing forceps procedures using the dominant hand. However, when the movement of both hands was coordinated ("bi-hand coordination"), the laparoscopic procedures were performed almost as deftly with 8K/2D and 2K/3D.

Using Intraoperative Recordings to Evaluate Surgical Technique and Performance in Mastoidectomy

Importance

Otolaryngology residency programs currently lack rigorous methods for assessing surgical skill and often rely on biased tools of evaluation.

Objectives

To evaluate which techniques used in mastoidectomy can serve as indicators of surgeon level (defined as the level of training) and whether these determinations of technique can be made based solely on the movement of the drill head or suction.

Design, Setting, and Participants

In this prospective, observational study conducted from January 1, 2015, to December 31, 2019, at a single tertiary care institution, 3 independent observers made blinded evaluations on 24 intraoperative recordings of surgeons (6 junior residents, 4 senior residents, and 2 attending surgeons) performing mastoidectomies.

Main Outcomes and Measures

Observers assessed drill stroke count, drilling efficiency, stroke pattern, use of suction and irrigation, and estimated surgeon level. Assessments were made on both original videos and animated videos that show only the path of the burr head or suction as dots against a white background.

Results

Among the 24 recorded mastoidectomies performed by the 12 study surgeons, intraclass correlation was excellent for original video assessment of drill stroke count (0.98 [95% CI, 0.97-1.00]), use of suction (0.75 [95% CI, 0.52-0.89]), use of irrigation (0.83 [95% CI, 0.66-0.92]), and estimated surgeon level (0.82 [95% CI, 0.64-0.92]) and fair for drilling efficiency (0.54 [95% CI, 0.09-0.79]) and stroke pattern (0.49 [95% CI, -0.02 to 0.76]). Intraclass correlation was excellent for animated video assessment of drill stroke count per unit time (0.98 [95% CI, 0.96-0.99]) and drilling efficiency (0.80 [95% CI, 0.60-0.91]), good for stroke pattern (0.68 [95% CI, 0.38-0.85]) and estimated surgeon level (based on path of drill) (0.69 [95% CI, 0.38-0.85]), and fair for use of suction (0.58 [95% CI, 0.16-0.80]) and estimated surgeon level (based on path of suction) (0.58 [95% CI, 0.17-0.80]). On evaluation of original videos, junior residents had lower drill stroke count compared with senior residents and attending surgeons (6.0 [interquartile range (IQR), 3.0-8.0] vs 9.5 [IQR, 5.0-13.0] vs 10.5 [IQR, 5.0-17.8]; η2 = 0.14 [95% CI, 0.01-0.28]). On evaluation of animated videos, junior residents also had lower drill stroke count compared with senior residents and attending surgeons (6.0 [IQR, 4.0-9.0] vs 10.5 [IQR, 10.0-13.8] vs 10.5 [IQR, 4.3-21.0]; η2 = 0.19 [95% CI, 0.04-0.33]). Compared with junior and senior residents, attending surgeons had higher median ratings of drilling efficiency (original videos: junior residents, 4.0 [IQR, 3.0-4.0]; senior residents, 4.0 [IQR, 3.0-4.8]; attending surgeons, 5.0 [IQR, 4.3-5.0]; η2 = 0.23 [95% CI, 0.06-0.37]; animated videos: junior residents, 4.0 [IQR, 3.0-4.0]; senior residents, 3.0 [IQR, 2.0-4.0]; attending surgeons, 5.0 [IQR, 4.0-5.0]; η2 = 0.25 [95% CI, 0.08-0.39]) and stroke pattern (original videos: junior residents, 4.0 [IQR, 3.0-4.0]; senior residents, 4.0 [IQR, 3.0-4.8]; attending surgeons, 5.0 [IQR, 5.0-5.0]; η2 = 0.17 [95% CI, 0.03-0.31]; animated videos: junior residents, 4.0 [IQR, 3.0-4.0]; senior residents, 4.0 [IQR, 2.0-4.0]; attending surgeons, 5.0 [IQR, 5.0-5.0]; η2 = 0.15 [95% CI, 0.02-0.29]).

Conclusions and Relevance

This study suggests that observation of intraoperative mastoidectomy recordings is a feasible method of evaluating surgeon level. Reasonable indicators of surgeon level include the drill stroke count, drilling efficiency, stroke pattern, and use of the suction irrigator. Observing the path of the drill alone is sufficient to appreciate differences in drilling technique but not sufficient to accurately determine surgeon level. Intraoperative recordings can serve as a useful addition to resident education and evaluation.

Training and qualification in gynecological minimal access surgery: A systematic review

Minimally invasive surgery demands specific endoscopic psychomotor skills that are usually acquired outside the operating theatre. We present the results of a systematic analysis to identify how simulation is used during training and qualification in minimal access surgery to improve gynecologist's surgical skills. We found that despite the availability of simulation tools along with methods for training and testing specific endoscopic psychomotor and technical skills, there is no clear evidence of the superiority of one tool or method over the others in skill acquisition. However, prospective studies show that well-guided training courses combined with different trainers and methods improve significantly surgeon's laparoscopic skills and suturing ability, which are unforgettable over time. However, this proficiency could deteriorate over time when it is solely learned and executed on simulation trainers. Structured curricula including theory, simulation, and live-surgery seem to be the best option for trainees. More research in this field is needed.

Upper extremity surface electromyography signal changes after laparoscopic training

Introduction

Objective measures of laparoscopic skill in training are lacking.

Aim

To evaluate the changes in the surface electromyography (sEMG) signal during laparoscopic training, and to link them to intracorporeal knot tying.

Material and methods

Ten right-handed medical students (6 female), aged 25 ±0.98, without training in laparoscopy, were enrolled in the study. With no additional training, they tied intracorporeal single knots for 15 min. Then underwent laparoscopic training and redid the knot tying exercise. During both events, sEMG was recorded from 8 measurement points on the upper extremities and neck bilaterally. We analyzed changes in sEMG resulting from training and tried to find sEMG predictive parameters for higher technical competence defined by the number of knots tied after the training.

Results

The average number of knots increased after the training. Significant decreases in activity after the training were visible for the non-dominant hand deltoid and trapezius muscles. Dominant and non-dominant hands had different activation patterns. Differences largely disappeared after the training. All muscles, except for the dominant forearm and non-dominant thenar, produced a negative correlation between their activities and the number of tied knots. The strongest anticorrelation occurred for the non-dominant deltoid (r = –0.863, p < 0.05). Relatively strong relationships were identified in the case of the non-dominant trapezius and forearm muscles (r = –0.587, r = –0.504).

Conclusions

At least for some muscle groups there is a change in activation patterns after laparoscopic training. Proximal muscle groups tend to become more relaxed and the distal ones become more active. Changes in the non-dominant hand are more pronounced than in the dominant hand.

Simulation and Training of Gynaecological Skills

In order to offer our patients, the "state of the art" treatment in gynaecology, we need a structured teaching program for trainees concerning the gynaecological skills. In recent years, training and education in endoscopic surgery has been critically reviewed. Clinicians, both surgeons as gynaecologists who perform endoscopic surgery without proper training of the specific psychomotor skills, are at higher risk to increased patient morbidity and mortality. The traditional apprentice-tutor model is no longer valid for developing all skills necessary in gynaecological surgery, particularly in endoscopy. Endoscopic training should happen at both the theoretical and the practical skill level. The acquisition of the correct knowledge regarding general laparoscopy, hysteroscopy and standard level procedures is as important as learning the necessary psychomotor skills to successfully perform endoscopic manipulations. Training in the operating room can only start when it is proven that knowledge and skills are present. To learn and train total abdominal hysterectomy by laparotomy there are inexpensive simple models that can be used, which are easy to reproduce. The development, construction, cost, and utility of a low-cost and anatomically representative vaginal hysterectomy simulator also has been described. The complexity of modern surgery has increased the demands and challenges to surgical education and the quality control.

A randomized control trial to evaluate the importance of pre-training basic laparoscopic psychomotor skills upon the learning curve of laparoscopic intra-corporeal knot tying

Background

Training of basic laparoscopic psychomotor skills improves the acquisition of more advanced laparoscopic tasks, such as laparoscopic intra-corporeal knot tying (LICK). This randomized controlled trial was designed to evaluate whether pre-training of basic skills, as laparoscopic camera navigation (LCN), hand-eye coordination (HEC), and bimanual coordination (BMC), and the combination of the three of them, has any beneficial effect upon the learning curve of LICK. The study was carried out in a private center in Asunción, Paraguay, by 80 medical students without any experience in surgery. Four laparoscopic tasks were performed in the ENCILAP model (LCN, HEC, BMC, and LICK). Participants were allocated to 5 groups (G1-G5). The study was structured in 5 phases. In phase 1, they underwent a base-line test (T₁) for all tasks (1 repetition of each task in consecutive order). In phase 2, participants underwent different training programs (30 consecutive repetitions) for basic tasks according to the group they belong to (G1: none; G2: LCN; G3: HEC; G4: BMC; and G5: LCN, HEC, and BMC). In phase 3, they were tested again (T₂) in the same manner than at T₁. In phase 4, they underwent a standardized training program for LICK (30 consecutive repetitions). In phase 5, they were tested again (T₃) in the same manner than at T₁ and T₂. At each repetition, scoring was based on the time taken for task completion system.

Results

The scores were plotted and non-linear regression models were used to fit the learning curves to one- and two-phase exponential decay models for each participant (individual curves) and for each group (group curves). The LICK group learning curves fitted better to the two-phase exponential decay model. From these curves, the starting points (Y0), the point after HEC training/before LICK training (Y1), the Plateau, and the rate constants (K) were calculated. All groups, except for G4, started from a similar point (Y0). At Y1, G5 scored already better than the others (G1 p = .004; G2 p = .04; G3 p < .0001; G4 NS). Although all groups reached a similar Plateau, G5 has a quicker learning than the others, demonstrated by a higher K (G1 p < 0.0001; G2 p < 0.0001; G3 p < 0.0001; and G4 p < 0.0001).

Conclusions

Our data confirms that training improves laparoscopic skills and demonstrates that pre-training of all basic skills (i.e., LCN, HEC, and BMC) shortens the LICK learning curve.