Undercoverage of lateral trochlear resection is correlated with the tibiofemoral alignment parameters in kinematically aligned TKA: a retrospective clinical study

Kinematic alignment adequately restores trochlear anatomy, patellar kinematics and kinetics in total knee arthroplasty: A systematic review

PURPOSE

Patellofemoral pain, maltracking and instability remain common and challenging complications after total knee arthroplasty. Controversy exists regarding the effect of kinematic alignment on the patellofemoral joint, as it generally leads to more femoral component valgus and internal rotation compared to mechanical alignment. The aim of this systematic review is to thoroughly examine the influence of kinematic alignment on the third space.

METHODS

A systematic search of the Pubmed, Cochrane and Web of Science databases was performed to screen for relevant articles published before 7 April 2024. This led to the final inclusion of 42 articles: 2 cadaveric, 9 radiographic, 12 computer simulation and 19 clinical studies. The risk of bias was evaluated with the risk of bias in non-randomised studies - of interventions tool as the lowest level of evidence of the included clinical studies was IV. The effects of kinematic alignment on patellar kinematics and kinetics, trochlear anatomy reconstruction and patellofemoral complication rate were investigated.

RESULTS

Kinematic alignment closely restores native patellar kinematics and kinetics, better reproduces native trochlear anatomy than mechanical alignment and leads to a 0%-11.4% incidence of patellofemoral complications. A more valgus joint line of the distal femur can cause lateral trochlear undercoverage and a trochlear angle orientation medial to the quadriceps vector when applying kinematic alignment, both of which can be solved by using an adjusted design with a 20.5° valgus trochlea.

CONCLUSION

Kinematic alignment appears to be a safe strategy for the patellofemoral joint in most knees, provided that certain precautions are taken to minimize the risk of complications.

LEVEL OF EVIDENCE

Level IV clinical studies, in vitro research.

The Orientation of the Prosthetic Trochlear Angle Is Predictable in Kinematically Aligned Total Knee Arthroplasty

Objective: This study aimed to predict the orientation of the prosthetic trochlear angle (PTA) relative to the quadriceps line of force (QLF) in kinematically aligned total knee arthroplasty (KA-TKA) by using preoperative radiographic parameters. Methods: This study included 144 patients who underwent KA-TKA with a femoral component designed for mechanical alignment (MADFC), with a PTA of 6°. Radiographic parameters, including the lateral distal femoral angle (LDFA) and the QLF^FMA (quadriceps line of force-femoral mechanical axis angle), were measured pre- and postoperatively. We developed and validated a formula to predict PTA orientation based on these values: "X = QLF^FMA-(PTA-(90°-LDFA))", where values of x > 0° predict a lateral PTA orientation, while x < 0° predicts a medial PTA. Results: The formula accurately predicted PTA orientation in 100% of the cases, with a difference between the predicted and actual PTA values of <0.5° in 75% of the cases. Patients with an LDFA < 86° and lower QLF^FMA values were identified as at risk for medial PTA orientation, which can affect patellar tracking. Conclusions: Our formula offers a reliable preoperative tool for predicting PTA orientation in KA-TKA, aiding in component selection and alignment strategies to improve patellofemoral function and patient outcomes.

Individualised compared to off-the-shelf total knee arthroplasty results in lower and less variable patellar tilt

PURPOSE

The purpose of this study was to compare postoperative patellar tilt at 4 months follow-up in a consecutive series of randomised patients that received individualised or off-the-shelf (OTS) primary total knee arthroplasty (TKA). The hypothesis was that patellar tilt would be lower and less variable in patients who received individualised TKA compared to patients who received OTS TKA.

METHODS

A consecutive series of 385 patients randomised (1:1) to receive either OTS TKA or individualised TKA were analysed. Pre- and postoperative radiographs at 4 months were obtained of weight-bearing long leg, anterior-posterior and lateral knee views and a skyline view at 30° of flexion. Postoperative patellar tilt was measured between the anterior femoral line and patellar resection surface (β) and the anterior femoral line and mediolateral patellar axis (σ). Postoperative patellar tilt (absolute value) was compared between the individualised and OTS TKA groups based on preoperative phenotypes of their femoral mechanical angle, tibial mechanical angle and hip-knee-ankle angle. Variability in postoperative patellar tilt was compared using the 95% confidence intervals (CIs).

RESULTS

Comparisons of baseline patient characteristics revealed no difference between the individualised and OTS TKA groups. Comparison of absolute postoperative patellar tilt revealed significant differences between individualised and OTS TKA (|β|, 1.0° ± 1.0° and 2.5° ± 2.2°, respectively, p < 0.001; |σ|, 1.7° ± 1.6° and 2.8° ± 2.3°, respectively, p < 0.001). The 95% CI of postoperative patellar tilt (|β|) was narrower in patients that received individualised compared to OTS TKA (0.0° to 3.8° and 0.1° to 8.3°, respectively), irrespective of their preoperative phenotype.

CONCLUSION

Patients who underwent individualised TKA had lower and less variable postoperative patellar tilt than those with OTS TKA, irrespective of preoperative phenotype. Individualised TKA allows the decoupling of the tibiofemoral and patellofemoral joints, replicating anatomical trochlear orientation and improving patellar tilt, which could facilitate better clinical outcomes.

CLINICAL TRIAL REGISTRATION

This study constitutes a part of a larger registered randomised controlled trial comparing patient satisfaction following OTS versus individualised TKA (NCT04460989).

LEVEL OF EVIDENCE

Level II.

Medial Deviation of a 6° Prosthetic Trochlear Groove After Kinematically Aligned Total Knee Arthroplasty Occurs in Four Types of Coronal Plane Alignment of the Knee (CPAK) and Decreases the Forgotten Joint Score

Background

The study focused on kinematically aligned total knee arthroplasty (KA TKA). It identified which coronal plane alignment of the knee (CPAK) types are associated with a higher proportion of medial deviation of the 6° prosthetic trochlear groove (PTG) relative to the quadriceps' line of pull and whether medial deviation adversely affected the Forgotten Joint Score (FJS). The research calculated the minimum PTG angle required to prevent medial deviation by at least 2° in all patients.

Methods

The study analyzed 296 KA TKAs with a postoperative long-leg scanogram and a 2-year FJS score. Radiographic measurements were used to determine the CPAK type and to identify the deviation of the 6° PTG relative to the quadriceps' line of pull as medial (-) or lateral (+).

Results

Fifty-one percent of KA TKAs had a medial deviation of the PTG, and the proportion was higher in CPAK I, II, III, and VI than in IV and V types (P < .05). The median FJS of CPAK III was significantly lower than I and IV (P < .0262) and comparable to II, V, and VI (P > .085). The minimum PTG angle required to prevent medial deviation by at least 2° in all patients is 17°.

Conclusions

A medial deviation of the 6° PTG occurred in more than half of the KA TKAs and was observed in 4 of 6 CPAK types. Because medial deviation was associated with a lower FJS, it is suggested that the femoral component should have a minimum PTG of 17° to prevent medial deviation by at least 2° in all patients.

Level of evidence

IV.

Individualizing a Total Knee Arthroplasty with Three-Dimensional Planning

Total knee arthroplasty (TKA) is evolving from mechanical alignment to more individualized alignment options in an attempt to improve patient satisfaction. Thirteen-year survival of kinematically aligned prostheses has recently been shown to be similar to mechanically aligned TKA, allaying concerns of long-term failure of this newer individualized technique. There is a complex inter-relationship of three-dimensional knee and limb alignment for a TKA. This article will review planning parameters necessary to individualize each knee, along with a discussion of how these parameters are related in three dimensions. Future use of computer software and machine learning has the potential to identify the ideal surgical plan for each patient. In the meantime, the material presented here can assist surgeons as newer individual alignment planning becomes a reality.

The Trochlear Groove of a Femoral Component Designed for Kinematic Alignment Is Lateral to the Quadriceps Line of Force and Better Laterally Covers the Anterior Femoral Resection Than a Mechanical Alignment Design

Background: A concern about kinematically aligned (KA) total knee arthroplasty (TKA) is that it relies on femoral components designed for mechanical alignment (MAd-FC) that could affect patellar tracking, in part, because of a trochlear groove orientation that is typically 6° from vertical. KA sets the femoral component coincident to the patient’s pre-arthritic distal and posterior femoral joint lines and restores the Q-angle, which varies widely. Relative to KA and the native knee, aligning the femoral component with MA changes most distal joint lines and Q-angles, and rotates the posterior joint line externally laterally covering the anterior femoral resection. Whether switching from a MAd- to a KAd-FC with a wider trochlear groove orientation of 20.5° from vertical results in radiographic measures known to promote patellar tracking is unknown. The primary aim was to determine whether a KAd-FC sets the trochlear groove lateral to the quadriceps line of force (QLF), better laterally covers the anterior femoral resection, and reduces lateral patella tilt relative to a MAd-FC. The secondary objective was to determine at six weeks whether the KAd-FC resulted in a higher complication rate, less knee extension and flexion, and lower clinical outcomes. Methods: Between April 2019 and July 2022, two surgeons performed sequential bilateral unrestricted caliper-verified KA TKA with manual instruments on thirty-six patients with a KAd- and MAd-FC in opposite knees. An observer measured the angle between a line best-fit to the deepest valley of the trochlea and a line representing the QLF that indicated the patient’s Q-angle. When the trochlear groove was lateral or medial relative to the QLF, the angle is denoted + or −, and the femoral component included or excluded the patient’s Q-angle, respectively. Software measured the lateral undercoverage of the anterior femoral resection on a Computed Tomography (CT) scan, and the patella tilt angle (PTA) on a skyline radiograph. Complications, knee extension and flexion measurements, Oxford Knee Score, KOOS Jr, and Forgotten Joint Score were recorded pre- and post-operatively (at 6 weeks). A paired Student’s T-test determined the difference between the KA TKAs with a KAd-FC and MAd-FC with a significance set at p < 0.05. Results: The final analysis included thirty-five patients. The 20.5° trochlear groove of the KAd-FC was lateral to the QLF in 100% (15 ± 3°) of TKAs, which was greater than the 69% (1 ± 3°) lateral to the QLF with the 6° trochlear groove of the MAd-FC (p < 0.001). The KAd-FC’s 2 ± 1.9 mm lateral undercoverage of the anterior femoral resection was less than the 4.4 ± 1.5 mm for the MAd-FC (p < 0.001). The PTA, complication rate, knee extension and flexion, and clinical outcome measures did not differ between component designs. Conclusions: The KA TKA with a KAd-FC resulted in a trochlear groove lateral to the QLF that included the Q-angle in all patients, and negligible lateral undercoverage of the anterior femoral resection. These newly described radiographic parameters could be helpful when investigating femoral components designed for KA with the intent of promoting patellofemoral kinematics.

Six Commonly Used Postoperative Radiographic Alignment Parameters Do Not Predict Clinical Outcome Scores after Unrestricted Caliper-Verified Kinematically Aligned TKA

Background: Unrestricted caliper-verified kinematically aligned (KA) TKA restores patient’s prearthritic coronal and sagittal alignments, which have a wide range containing outliers that concern the surgeon practicing mechanical alignment (MA). Therefore, knowing which radiographic parameters are associated with dissatisfaction could help a surgeon decide whether to rely on them as criteria for revising an unhappy patient with a primary KA TKA using MA principles. Hence, we determined whether the femoral mechanical angle (FMA), hip–knee–ankle angle (HKAA), tibial mechanical angle (TMA), tibial slope angle (TSA), and the indicators of patellofemoral tracking, including patella tilt angle (PTA) and the lateral undercoverage of the trochlear resection (LUCTR), are associated with clinical outcome scores. Methods: Forty-three patients with a CT scan and skyline radiograph after a KA TKA with PCL retention and medial stabilized design were analyzed. Linear regression determined the strength of the association between the FMA, HKA angle, PTS, PTA, and LUCTR and the forgotten joint score (FJS), Oxford knee score (OKS), and KOOS Jr score obtained at a mean of 23 months. Results: There was no correlation between the FMA (range 2° varus to −10° valgus), HKAA (range 10° varus to −9° valgus), TMA (range 10° varus to −0° valgus), TSA (range 14° posterior to −4° anterior), PTA (range, −10° medial to 14° lateral), and the LUCTR resection (range 2 to 9 mm) and the FJS (median 83), the OKS (median 44), and the KOOS Jr (median 85) (r = 0.000 to 0.079). Conclusions: Surgeons should be cautious about using postoperative FMA, HKAA, TMA, TSA, PTA, and LUCTR values within the present study’s reported ranges to explain success and dissatisfaction after KA TKA.