Mid-term results of a new femoral prosthesis using Ti-Nb-Sn alloy with low Young's modulus

Effectiveness of Stress Shielding Prevention Using a Low Young's Modulus Ti-33.6Nb-4Sn Stem: A 7-Year Follow-Up Study

BACKGROUND

Stress shielding (SS) after total hip arthroplasty (THA) leads to proximal femoral bone loss and increases the risk of complications such as implant loosening and periprosthetic fracture. While various low-stiffness stems have been developed to prevent SS, they often compromise mechanical stability. A novel femoral stem composed of Ti-33.6Nb-4Sn (TNS) alloy offers a gradually decreasing Young's modulus from proximal to distal regions, potentially improving load distribution and reducing SS. This study aimed to evaluate the mid-term clinical and radiographic outcomes of the TNS stem, with a particular focus on its effectiveness in suppressing SS.

METHODS

A prospective clinical study was conducted involving 35 patients who underwent THA using the TNS stem, with a minimum follow-up of 7 years. Twenty-one patients with Ti6Al4V metaphyseal-filling stems served as controls. Clinical outcomes were assessed using Japanese Orthopaedic Association (JOA) scores, and radiographic SS was graded using Engh's classification and analyzed in Gruen zones. Inter-examiner reliability and statistical comparisons between groups were performed using appropriate tests.

RESULTS

The TNS group showed significantly higher preoperative JOA scores than the control group, but no significant difference in final scores. Both groups demonstrated significant improvement postoperatively. Third-degree SS occurred in the TNS group, although the overall SS grade distribution was significantly lower than in the control group (p = 0.03). SS frequency was significantly reduced in Gruen Zones 2, 3, and 6 in the TNS group.

CONCLUSIONS

The TNS stem demonstrated a significant reduction in SS progression compared to conventional titanium stems over a 7-year period, with comparable clinical outcomes. However, the occurrence of third-degree SS indicates that material optimization alone may be insufficient, highlighting the need for further design improvements.

Preoperative Osteoporosis Treatment Reduces Stress Shielding in Total Hip Arthroplasty

Background: Total hip arthroplasty (THA) is a widely used surgical intervention for hip osteoarthritis (HOA), with a rising demand driven by an aging population. Osteoporosis is associated with increased risks of bone loss and implant loosening after THA. While medications such as bisphosphonates and denosumab have shown promise in mitigating these risks, the impact of preoperative osteoporosis treatment on postoperative outcomes remains unclear. This study investigates the effect of preoperative osteoporosis treatment intervention on stress shielding and clinical outcomes in THA patients. Methods: This retrospective study included 107 patients who underwent cementless THA between April 2019 and March 2022. Patients under 60 years old, with a follow-up period of less than one year, or with prior hip surgery were excluded. Participants were divided into two groups: a treatment group receiving osteoporosis medication preoperatively and a non-treatment group. The outcomes assessed included preoperative bone metabolism markers, Bombelli classification, stress shielding grade, and clinical scores. Statistical analysis was performed using the Mann-Whitney U test and Chi-squared test, with significance set at p < 0.05. Results: The preoperative osteoporosis treatment intervention rate was 28.9%. Stress shielding grades were significantly lower in the treatment group (p = 0.001). However, no significant differences were observed in clinical scores one year postoperatively. Conclusion: Preoperative osteoporosis treatment significantly reduced stress shielding incidence, potentially influencing long-term outcomes by preventing bone atrophy-related pain and fractures. Preoperative bone density assessment and osteoporosis treatment intervention are recommended to improve THA outcomes. Larger studies are needed for further validation.

TiNbSn alloy plates with low Young's modulus modulates interfragmentary movement and promote osteosynthesis in rat femur

Orthopedic implants such as arthroplasty prostheses, fracture plates, and intramedullary nails often use materials like Ti6Al4V alloy and commercially pure titanium (CP-Ti), which have Young's modulus significantly higher than that of human cortical bone, potentially causing stress shielding and inhibiting effective fracture healing. TiNbSn alloy, a β-type titanium alloy with a lower Young's modulus (40-49 GPa), has shown promise in reducing stress shielding and enhancing bone healing by promoting effective load sharing with bone. This study used 5-hole plates made from TiNbSn alloy and CP-Ti to investigate their effects on bone healing in a rat femoral fracture model. Micro-CT analysis and mechanical testing were performed six weeks postoperatively to assess bone healing. Additionally, Finite element method (FEM) analysis was employed to evaluate stress shielding and interfragmentary movement (IFM) at the fracture site. Micro-CT analysis revealed significantly higher bone volume and mineral density in the TiNbSn group than in the CP-Ti group. Mechanical testing showed increased maximum load and stiffness in the TiNbSn group (77.2 ± 10.0 N for the TiNbSn alloy plate group versus 53.3 ± 8.5 N for the CP-Ti group (p = 0.002)). FEM analysis indicated that TiNbSn plates reduced stress shielding and allowed for greater displacement and strain, promoting IFM conducive to bone healing. The findings suggest that TiNbSn alloy plates are more effective than CP-Ti plates in promoting bone healing by reducing stress shielding and enhancing IFM. The lower Young's modulus of TiNbSn allows better load distribution, facilitating bone regeneration and strengthening at the fracture site.

Comparison of Stress between Three Different Functionally Graded Hip Stem Implants Made of Different Titanium Alloys and Composite Materials

This study aims to evaluate the mechanical behavior, by ways of the FEM, of three femoral stems made of a Ti-6Al-4V titanium alloy with transverse holes in the proximal zone and a stem made of a β-type titanium alloy with a stiffness varying from 65 GPa in the proximal zone to 110 GPa in the distal zone and the CFRP composite material. The purpose of the study was to evaluate the effect of stress shielding on an intact femoral bone. A three-dimensional model of the intact femur was created, and the three prostheses were inserted with perfect stem bone fit. Applying constraint conditions such as fixation in all directions of the distal part of the femur and the application of a static load simulating standing still during a gait cycle allowed the stresses of both the implants and the bone to be compared. Evaluating the stress shielding for the three proposed materials was possible by identifying the seven Gruen zones. We can see from the results obtained that the metal alloys produced observable stress shielding in all the Gruen zones. There was a difference for the β-type alloy which, as a result of its stiffness variation from the proximal to the distal zone, did not show any level of stress shielding in Gruen zones 1 and 2. The CFRP composite, in contrast, showed no stress shielding in all of the Gruen zones and is an excellent material for the fabrication of total hip replacements. Further in vitro and in vivo validation studies are needed to make the modeling more accurate and understand the biological effects of the use of the three materials.

Long-term results of Chiari pelvic osteotomy on the preservation of hip function with mean follow-up of more than 30 years and its prognostic factors

BACKGROUND

Clinical outcomes of Chiari pelvic osteotomy for acetabular dysplasia, including conversion to total hip arthroplasty (THA), have not been adequately explored. The purpose of this study was to examine the long-term results and clinical outcomes of Chiari pelvic osteotomy as the primary outcome and to analyze its prognostic factors as the second outcome.

METHODS

This study was a multicenter, retrospective cohort study. Ninety-seven patients underwent Chiari pelvic osteotomy at three hospitals between March 1975 and October 1997. The long-term clinical outcomes of Chiari pelvic osteotomy, including conversion to THA and hip pain, were analyzed using the Kaplan-Meier method. In addition, the prognostic factors for conversion to THA after Chiari pelvic osteotomy were evaluated with clinical variables and radiographic parameters.

RESULTS

The study included 51 hips in 45 patients (4 men and 41 women) with long-term follow-up. The survival rates assessed by Kaplan-Meier analysis with conversion to THA as an endpoint, were 90.2% (95% confidence interval (CI) 82.0-98.4%) at 20 years and 73.5% (95% CI 61.1-86.0%) at 30 years. In contrast, the Kaplan-Meier survival rates with the Japanese Orthopaedic Association hip score for pain ≤20 as an endpoint, were 86.3% (95% CI 76.8-95.7%) at 20 years and 65.6% (95% CI 52.3-79.0%) at 30 years. Only older age at osteotomy was the significantly poor prognostic factor for conversion to THA, with a hazard ratio of 1.11/year, 95% CI 1.06 to 1.18, (p < 0.01).

CONCLUSION

Chiari pelvic osteotomy may still be a good alternative to bony reconstructive surgery for acetabular dysplasia especially in young patients. Only older age at the osteotomy was related to the poor prognosis of preserving hip function.

Debulking of the Femoral Stem in a Primary Total Hip Joint Replacement: A Novel Method to Reduce Stress Shielding

In current-generation designs of total primary hip joint replacement, the prostheses are fabricated from alloys. The modulus of elasticity of the alloy is substantially higher than that of the surrounding bone. This discrepancy plays a role in a phenomenon known as stress shielding, in which the bone bears a reduced proportion of the applied load. Stress shielding has been implicated in aseptic loosening of the implant which, in turn, results in reduction in the in vivo life of the implant. Rigid implants shield surrounding bone from mechanical loading, and the reduction in skeletal stress necessary to maintain bone mass and density results in accelerated bone loss, the forerunner to implant loosening. Femoral stems of various geometries and surface modifications, materials and material distributions, and porous structures have been investigated to achieve mechanical properties of stems closer to those of bone to mitigate stress shielding. For improved load transfer from implant to femur, the proposed study investigated a strategic debulking effort to impart controlled flexibility while retaining sufficient strength and endurance properties. Using an iterative design process, debulked configurations based on an internal skeletal truss framework were evaluated using finite element analysis. The implant models analyzed were solid; hollow, with a proximal hollowed stem; FB-2A, with thin, curved trusses extending from the central spine; and FB-3B and FB-3C, with thick, flat trusses extending from the central spine in a balanced-truss and a hemi-truss configuration, respectively. As outlined in the International Organization for Standardization (ISO) 7206 standards, implants were offset in natural femur for evaluation of load distribution or potted in testing cylinders for fatigue testing. The commonality across all debulked designs was the minimization of proximal stress shielding compared to conventional solid implants. Stem topography can influence performance, and the truss implants with or without the calcar collar were evaluated. Load sharing was equally effective irrespective of the collar; however, the collar was critical to reducing the stresses in the implant. Whether bonded directly to bone or cemented in the femur, the truss stem was effective at limiting stress shielding. However, a localized increase in maximum principal stress at the proximal lateral junction could adversely affect cement integrity. The controlled accommodation of deformation of the implant wall contributes to the load sharing capability of the truss implant, and for a superior biomechanical performance, the collared stem should be implanted in interference fit. Considering the results of all implant designs, the truss implant model FB-3C was the best model.

Low Young's Modulus TiNbSn Alloy Locking Plates Accelerate Osteosynthesis in Rabbit Tibiae

A new beta TiNbSn alloy with a low Young's modulus of approximately 40 GPa has been developed to resolve the stress shielding by Young's modulus divergence. In this study, the efficacy of TiNbSn alloy locking plates on bone repair is compared to that of commercially pure titanium (CP-Ti). The TiNbSn alloy and CP-Ti, which have Young's moduli of 49.1 GPa and 107 GPa, respectively, were compared. Male Japanese white rabbits were anesthetized, and osteotomy and osteosynthesis with locking plates were performed on the right tibia. The bone repair was assessed using micro-computed tomography (CT), histomorphometry, immunohistochemistry, and mechanical testing. Micro-CT, histomorphometry, immunohistochemistry, and mechanical testing were performed four weeks after osteotomy. Six weeks after surgery, micro-CT and mechanical testing were performed. Micro-CT analysis at four weeks after surgery showed that the intramedullary fracture callus in the TiNbSn alloy group had more bone volume and numerous bridging structures compared to the CP-Ti group (CP-Ti vs. TiNbSn alloy, 34.3 ± 13.1 mm3 vs. 61.3 ± 19.6 mm3, p = 0.02; mean ± standard deviation). At four weeks post-osteotomy, the healed tibia showed significantly higher strength in the TiNbSn alloy group compared with CP-Ti (CP-Ti vs. TiNbSn alloy, 81.3 ± 31.2 N vs. 133.7 ± 46.6 N, p = 0.04). TiNbSn alloy locking plates had a more positive impact on bone formation and bone strength restoration than the CP-Ti locking plates during the early phase of bone healing.

TiNbSn stems with gradient changes of Young's modulus and stiffness reduce stress shielding compared to the standard fit-and-fill stems

BACKGROUND

The difference between Young's moduli of the femur and the stem causes stress shielding (SS). TiNbSn (TNS) stem has a low Young's modulus and strength with gradient functional properties during the change in elastic modulus with heat treatment. The aim of this study was to investigate the inhibitory effect of TNS stems on SS and their clinical outcomes compared to conventional stems.

METHODS

This study was a clinical trial. Primary THA was performed using a TNS stem from April 2016 to September 2017 for patients in the TNS group. Unilateral THA was performed using a Ti6Al4V alloy stem from January 2007 to February 2011 for patients in the control group. The TNS and Ti6Al4V stems were matched in shape. Radiographs were obtained at the 1- and 3-year follow-ups. Two surgeons independently checked the SS grade and appearance of cortical hypertrophy (CH). The Japanese Orthopaedic Association (JOA) scores before and 1 year after surgery were assessed as clinical scores.

RESULTS

None of the patients in the TNS group had grade 3 or 4 SS. In contrast, in the control group, 24% and 40% of patients had grade 3 and 4 SS at the 1- and 3-year follow-ups, respectively. The SS grade was lower in the TNS group than in the control group at the 1- and 3-year follow-ups (p < 0.001). The frequencies of CH in both groups were no significant difference at the 1- and 3-year follow-ups. The JOA scores of the TNS group significantly improved at 1 year after surgery and were comparable to control group.

CONCLUSION

The TNS stem reduced SS at 1 and 3 years after THA compared to the proximal-engaging cementless stem, although the shapes of the stems matched. The TNS stem could reduce SS, stem loosening, and periprosthetic fractures.

TRIAL REGISTRATION

Current Controlled Trials. ISRCTN21241251. https://www.isrctn.com/search?q=21241251 . The date of registration was October 26, 2021. Retrospectively registered.

Recent Methods for Modifying Mechanical Properties of Tissue-Engineered Scaffolds for Clinical Applications

The limited regenerative capacity of the human body, in conjunction with a shortage of healthy autologous tissue, has created an urgent need for alternative grafting materials. A potential solution is a tissue-engineered graft, a construct which supports and integrates with host tissue. One of the key challenges in fabricating a tissue-engineered graft is achieving mechanical compatibility with the graft site; a disparity in these properties can shape the behaviour of the surrounding native tissue, contributing to the likelihood of graft failure. The purpose of this review is to examine the means by which researchers have altered the mechanical properties of tissue-engineered constructs via hybrid material usage, multi-layer scaffold designs, and surface modifications. A subset of these studies which has investigated the function of their constructs in vivo is also presented, followed by an examination of various tissue-engineered designs which have been clinically translated.

Genome-Wide Association Study and Transcriptome of Japanese Patients with Developmental Dysplasia of the Hip Demonstrates an Association with the Ferroptosis Signaling Pathway

This study examined the association between developmental dysplasia of the hip (DDH) and disease-associated loci in a Japanese cohort. A genome-wide association study (GWAS) of 238 Japanese patients with DDH and 2044 healthy individuals was performed. As a replicate, GWAS was also conducted on the UK Biobank data with 3315 cases and matched 74,038 controls. Gene set enrichment analyses (GSEAs) of both the genetics and transcriptome of DDH were performed. Transcriptome analysis of cartilage specimens from DDH-associated osteoarthritis and femoral neck fractures was performed as a control. Most of the lead variants were very low-frequency ones in the UK, and variants in the Japanese GWAS could not be replicated with the UK GWAS. We assigned DDH-related candidate variants to 42 and 81 genes from the Japanese and UK GWASs, respectively, using functional mapping and annotation. GSEA of gene ontology, disease ontology, and canonical pathways identified the most enriched pathway to be the ferroptosis signaling pathway, both in the Japanese gene set as well as the Japanese and UK merged set. Transcriptome GSEA also identified significant downregulation of genes in the ferroptosis signaling pathway. Thus, the ferroptosis signaling pathway may be associated with the pathogenic mechanism of DDH.

Antimicrobial Properties of TiNbSn Alloys Anodized in a Sulfuric Acid Electrolyte

TiNbSn alloy is a high-performance titanium alloy which is biosafe, strong, and has a low Young's modulus. TiNbSn alloy has been clinically applied as a material for orthopedic prosthesis. Anodized TiNbSn alloys with acetic and sulfuric acid electrolytes have excellent biocompatibility for osseointegration. Herein, TiNbSn alloy was anodized in a sulfuric acid electrolyte to determine the antimicrobial activity. The photocatalytic activities of the anodic oxide alloys were investigated based on their electronic band structure and crystallinity. In addition, the cytotoxicity of the anodized TiNbSn alloy was evaluated using cell lines of the osteoblast and fibroblast lineages. The antimicrobial activity of the anodic oxide alloy was assessed according to the ISO 27447 using methicillin-susceptible Staphylococcus aureus, methicillin-resistant Staphylococcus aureus, and Escherichia coli. The anodic oxide comprised rutile and anatase titanium dioxide (TiO₂) and exhibited a porous microstructure. A well-crystallized rutile TiO₂ phase was observed in the anodized TiNbSn alloy. The methylene blue degradation tests under ultraviolet illumination exhibited photocatalytic activity. In antimicrobial tests, the anodized TiNbSn alloy exhibited robust antimicrobial activities under ultraviolet illumination for all bacterial species, regardless of drug resistance. Therefore, the anodized TiNbSn alloy can be used as a functional biomaterial with low Young's modulus and excellent antimicrobial activity.

β-type TiNbSn Alloy Plates With Low Young Modulus Accelerates Osteosynthesis in Rabbit Tibiae

BACKGROUND

Ti6Al4V alloy, which is commonly used for biomedical applications, has a Young modulus (110 GPa) that is higher than that of human cortical bone (11 to 20 GPa). Using an implant with a material with a low Young modulus that enhances load sharing by the bone even more than those made of Ti6Al4V could be beneficial for bone healing and further reduce the potential for stress shielding. A new β-type TiNbSn alloy has a low Young modulus of approximately 40 to 49 GPa. However, whether the new titanium alloy with a lower Young modulus is advantageous in terms of fracture healing has not been assessed, and a small-animal model seems a reasonable first step in its assessment.

QUESTIONS/PURPOSES

To assess the impact of a TiNbSn alloy plate with a lower Young modulus compared with a Ti6Al4V alloy plate on fracture healing, we evaluated: (1) bony bridging and callus volume, (2) new bone formation and remaining cartilage tissue, (3) osteoblast activity in the callus, and (4) mechanical strength and stiffness of the callus in bending.

METHODS

Fracture plates manufactured from TiNbSn and Ti6Al4V alloys, which have Young moduli of 49 GPa and 110 GPa, respectively, were compared. The main reason for using rabbits was the high reliability of the three-point bending mechanical test of the rabbit tibia. Forty-two male Japanese white rabbits weighing 2.8 to 3.4 kg were anesthetized. A 5-cm skin incision was made on the medial side in the mid-diaphysis of the right tibia. Eight-hole plates were used, which were 42 mm long, 5 mm wide, and 1.2 mm thick. Plate fixation was performed using three proximal and three distal screws. After the plate was installed, an osteotomy was performed using a 1-mm-wide wire saw to create a standardized tibial transverse osteotomy model with a 1-mm gap. Bone healing was quantitatively assessed by two nonblinded observers using micro-CT (bony bridging and callus volume), histomorphometry (new bone formation and remaining cartilage tissue), immunohistochemistry (osteoblast activity), and mechanical testing (mechanical strength and stiffness in bending). Measurements on nondemineralized specimens were descriptive statistics due to their small number. Four weeks after osteotomy and fixation, 30 rabbits were euthanized to undergo micro-CT and subsequent mechanical testing (n = 12), histomorphometry and immunohistochemistry with demineralized specimens (n = 12), and histomorphometry with a nondemineralized specimen (n = 6). Eight weeks postoperatively, 12 rabbits were euthanized for micro-CT and subsequent mechanical testing.

RESULTS

Intramedullary fracture calluses treated with TiNbSn alloy plates had larger bone volumes and more numerous bridging structures than those treated with Ti6Al4V alloy plates at 4 weeks after osteotomy (Ti6Al4V alloy versus TiNbSn alloy: 30 ± 7 mm 3 versus 52 ± 14 mm 3 , mean difference 22 [95% CI 9 to 37]; p = 0.005; ICC 0.98 [95% CI 0.95 to 0.99]). Histologic assessments demonstrated there was greater new bone formation (total callus: Ti6Al4V versus TiNbSn: 16 ± 4 mm 2 versus 24 ± 7 mm 2 , mean difference 8 [95% CI 1 to 16]; p = 0.04; ICC 0.98 [95% CI 0.93 to 0.99]; intramedullary callus: Ti6Al4V versus TiNbSn: 6 ± 4 mm 2 versus 13 ± 5 mm 2 , mean difference 7 [95% CI 1 to 13]; p = 0.02; ICC 0.98 [95% CI 0.95 to 0.99]) and a higher number of osteocalcin-positive cells (Ti6Al4V alloy versus TiNbSn alloy: 1397 ± 197 cells/mm 2 versus 2044 ± 183 cells/mm 2 , mean difference 647 [95% CI 402 to 892]; p < 0.001; ICC 0.98 [95% CI 0.95 to 0.99]) in the TiNbSn alloy group than in the Ti6Al4V alloy group. At 4 weeks after osteotomy, both bone strength and stiffness of the healed bone in the TiNbSn alloy group were higher than those in the Ti6Al4V alloy group (maximum load: Ti6Al4V alloy versus TiNbSn alloy: 83 ± 30 N versus 127 ± 26 N; mean difference 44 [95% CI 8 to 80]; p = 0.02; stiffness: Ti6Al4V alloy versus TiNbSn alloy: 92 ± 43 N/mm versus 165 ± 63 N/mm; mean difference 73 [95% CI 4 to 143]; p = 0.047). Eight weeks after osteotomy, no between-group differences were observed in the strength and stiffness of the healed bone.

CONCLUSION

The results of this study indicate that TiNbSn alloy plate with a lower Young modulus resulted in improved bone formation and stiffer callus during the early phase (4 weeks after surgery) but not the later phase (8 weeks after surgery) of bone healing.

CLINICAL RELEVANCE

An overly stiff plate may impair callus formation and bone healing. The TiNbSn alloy plate with a low Young modulus improves the early formation of new bone and stiff callus at the osteotomy site compared with the Ti6Al4V alloy plate in the healing process, which may promote bone repair. TiNbSn alloy may be a promising biomaterial for fracture treatment devices. Further research to address concerns about the strength of TiNbSn alloy plates, such as fatigue life and plate fracture, will be necessary for clinical applications, including mechanical tests to verify fatigue life and validation in larger animals with greater body weight.

A Review of Anodized TiNbSn Alloys for Improvement in Layer Quality and Application to Orthopedic Implants

Titanium alloys are useful for application in orthopedic implants. However, complications, such as prosthetic infections and aseptic loosening, often occur after orthopedic devices are implanted. Therefore, innovation in surface modification techniques is essential to develop orthopedic materials with optimal properties at the biomaterial–bone interface. In this review, we present recent research on the improvement in the osteoconductivity and antibacterial effect of the Ti-33.6% Nb-4% Sn (TiNbSn) alloy by anodic oxidation and other related studies. TiNbSn alloys are excellent new titanium alloys with a low Young’s modulus, high tensile strength, and with gradient functional properties such as a thermally adjustable Young’s modulus and strength. Titanium dioxide (TiO₂), when obtained by the anodic oxidation of a TiNbSn alloy, improves bone affinity and provides antibacterial performance owing to its photocatalytic activity. The safety of TiO₂ and its strong bonding with metal materials make its method of preparation a promising alternative to conventional methods for improving the surface quality of orthopedic implants. Implementing anodization technology for TiNbSn alloys may alleviate orthopedic surgery-related complications, such as loosening, stress shielding, and infection after arthroplasty.

Total hip arthroplasty after rotational acetabular osteotomy for developmental dysplasia of the hip: a retrospective observational study

Background

Total hip arthroplasty after osteotomy is more technically challenging than primary total hip arthroplasty, especially concerning cup placement. This is attributed to bone morphological abnormalities caused by acetabular bone loss and osteophyte formation. This study aimed to investigate the clinical and radiological outcomes of total hip arthroplasty after rotational acetabular osteotomy compared with those of primary total hip arthroplasty, focusing mainly on acetabular deformity and cup position.

Methods

The study included 22 hips that had undergone rotational acetabular osteotomy and 22 hips in an age- and sex-matched control group of patients who underwent total hip arthroplasties between 2005 and 2020. We analyzed cup abduction and anteversion; lateral, anterior, and posterior cup center–edge angle; hip joint center position; femoral anteversion angle; and presence of acetabular defect using postoperative radiography and computed tomography. Operative results and clinical evaluations were also analyzed.

Results

The clinical evaluation showed that the postoperative flexion range of motion was lower in total hip arthroplasty after rotational acetabular osteotomy than in primary total hip arthroplasty, although no significant difference was noted in the postoperative total Japanese Orthopedic Association hip score. The operative time was significantly longer in the rotational acetabular osteotomy group than in the control group, but there was no significant difference in blood loss. The lateral cup center–edge angle was significantly higher and the posterior cup center–edge angle was significantly lower in the total hip arthroplasty after rotational acetabular osteotomy, suggesting a posterior bone defect existed in the acetabulum. In total hip arthroplasty after rotational acetabular osteotomy, the hip joint center was located significantly superior and lateral to the primary total hip arthroplasty.

Conclusions

In total hip arthroplasty after rotational acetabular osteotomy, the cup tended to be placed in the superior and lateral positions, where there was more bone volume. The deformity of the acetabulum and the high hip center should be considered for treatment success because they may cause cup instability, limited range of motion, and impingement.

Antibacterial Activity of an Anodized TiNbSn Alloy Prepared in Sodium Tartrate Electrolyte

In this study, we anodized a TiNbSn alloy with low Young’s modulus in an electrolyte of sodium tartrate with and without hydrogen peroxide (H2O2). The photo-induced characteristics of the anodized alloy were analyzed for crystallinity and electrochemical conditions with comparisons to the effect with the addition of H2O2. The antibacterial activity was evaluated using methicillin-resistant Staphylococcus aureus and other pathogenic bacteria according to ISO 27447, and time decay antibacterial tests were also conducted. The anodized oxide had a porous microstructure with anatase- and rutile-structured titanium dioxide (TiO2). In contrast, the peaks of rutile-structured TiO2 were accelerated in the anodized TiNbSn alloy with H2O2. The formation of hydroxyl radicals and methylene blue breaching performance under ultraviolet irradiation was confirmed in the anodic oxide on TiNbSn alloy with and without H2O2. The anodic oxide on TiNbSn alloy had a robust antibacterial activity, and no significant difference was detected with or without H2O2. We conclude that anodized TiNbSn alloy with sodium tartrate electrolyte may be a functional biomaterial with a low Young’s modulus and an antibacterial function.

When the Total Hip Replacement Fails: A Review on the Stress-Shielding Effect

Total hip arthroplasty is one of the most common and successful orthopedic surgeries. Sometimes, periprosthetic osteolysis occurs associated with the stress-shielding effect: it results in the reduction of bone density, where the femur is not correctly loaded, and in the formation of denser bone, where stresses are confined. This paper illustrates the stress shielding effect as a cause of the failing replacement of the hip joint. An extensive literature survey has been accomplished to describe the phenomenon and identify solutions. The latter refer to the design criteria and the choice of innovative materials/treatments for prosthetic device production. Experimental studies and numerical simulations have been reviewed. The paper includes an introduction to explain the scope; a section illustrating the causes of the stress shielding effect; a section focusing on recent attempts to redefine prosthetic device design criteria, current strategies to improve the osteointegration process, and a number of innovative biomaterials; functionally graded materials are presented in a dedicated section: they allow customizing prosthesis features with respect to the host bone. Conclusions recommend an integrated approach for the production of new prosthetic devices: the “engineering community” has to support the “medical community” to assure an effective translation of research results into clinical practice.