A novel eurythermic and thermostale lipase LipM from Pseudomonas moraviensis M9 and its application in the partial hydrolysis of algal oil

Recent Advances in Overexpression of Functional Recombinant Lipases

Heterologous functional expression of the recombinant lipases is typically a bottleneck due to the expression in the insoluble fraction as inclusion bodies (IBs) which are in inactive form. Due to the importance of lipases in various industrial applications, many investigations have been conducted to discover suitable approaches to obtain functional lipase or increase the expressed yield in the soluble fraction. The utilization of the appropriate prokaryotic and eukaryotic expression systems, along with the suitable vectors, promoters, and tags, has been recognized as a practical approach. One of the most powerful strategies to produce bioactive lipases is using the molecular chaperones co-expressed along with the target protein's genes into the expression host to produce the lipase in soluble fraction as a bioactive form. The refolding of expressed lipase from IBs (inactive) is another practical strategy which is usually carried out through chemical and physical methods. Based on recent investigations, the current review simultaneously highlights strategies to express the bioactive lipases and recover the bioactive lipases from the IBs in insoluble form.

N-terminal lid swapping contributes to the substrate specificity and activity of thermophilic lipase TrLipE

TrLipE is a thermophilic lipase that has potential commercial applications because of its catalytic ability under extreme conditions. Consistent with most lipases, the lid of TrLipE is located over the catalytic pocket, controls the substrate channel to the active center, and regulates the substrate specificity, activity, and stability of the enzyme through conformational changes. TrLipE from Thermomicrobium roseum has potential industrial applications, which is hindered by its weak enzymatic activity. Here, 18 chimeras (TrL1-TrL18) were reconstructed by N-terminal lid swapping between TrLipE and structurally similar enzymes. The results showed that the chimeras had a similar pH range and optimum pH as wild TrLipE but a narrower temperature range of 40-80°C, and TrL17 and the other chimeras showed lower optimum temperatures of 70°C and 60°C, respectively. In addition, the half-lives of the chimeras were lower than those of TrLipE under optimum temperature conditions. Molecular dynamics simulations indicated that chimeras had high RMSD, RMSF, and B-factor values. When p-nitrophenol esters with different chains were used as substrates, compared with TrLipE, most of the chimeras had a low Km and high kcat value. The chimeras TrL2, TrL3, TrL17, and TrL18 could specifically catalyze the substrate 4-nitrophenyl benzoate, with TrL17 showing the highest kcat/Km value of 363.88 ± 15.83 L⋅min-1⋅mmol-1. Mutants were then designed by investigating the binding free energies of TrL17 and 4-nitrophenyl benzoate. The results indicated that single, double, and triple substitution variants (M89W and I206N; E33W/I206M and M89W/I206M; and M89W/I206M/L21I and M89W/I206N/L21I, respectively) presented approximately 2- to 3-fold faster catalysis of 4-nitrophenyl benzoate than the wild TrL17. Our observations will facilitate the development of the properties and industrial applications of TrLipE.

Genomic Association Analysis of Growth and Backfat Traits in Large White Pigs

The pig industry is significantly influenced by complex traits such as growth rate and fat deposition, which have substantial implications for economic returns. Over the years, remarkable genetic advancements have been achieved through intense artificial selection to enhance these traits in pigs. In this study, we aimed to investigate the genetic factors that contribute to growth efficiency and lean meat percentages in Large White pigs. Specifically, we focused on analyzing two key traits: age at 100 kg live weight (AGE100) and backfat thickness at 100 kg (BF100), in three distinct Large White pig populations-500 Canadian, 295 Danish, and 1500 American Large White pigs. By employing population genomic techniques, we observed significant population stratification among these pig populations. Utilizing imputed whole-genome sequencing data, we conducted single population genome-wide association studies (GWAS) as well as a combined meta-analysis across the three populations to identify genetic markers associated with the aforementioned traits. Our analyses highlighted several candidate genes, such as CNTN1-which has been linked to weight loss in mice and is potentially influential for AGE100-and MC4R, which is associated with obesity and appetite and may impact both traits. Additionally, we identified other genes-namely, PDZRN4, LIPM, and ANKRD22-which play a partial role in fat growth. Our findings provide valuable insights into the genetic basis of these important traits in Large White pigs, which may inform breeding strategies for improved production efficiency and meat quality.

Selective cultivation of bacterial strains with lipolytic and hydrocarbon-oxidizing activity from bottom sediments of the Ob River, Western Siberia

Bacteria play a key role in biogeochemical cycles in natural and anthropogenic ecosystems. In river ecosystems, bacteria intensively colonize silt sediments. Microorganisms are essential for energy conversion, biogeochemical nutrient cycling, pollutant degradation, and biotransformation of organic matter; therefore, bottom sediments can be a source of metabolically diverse microorganisms, including those with promise for industrial biotechnologies. The aim of this work was to isolate and study pure cultures of microorganisms – producers of industrially important enzymes and decomposers of organic matter – from bottom sediments of the Ob River. Pork fat and diesel fuel were used as substrates to obtain enrichment and pure cultures for selective cultivation of bacteria with lipolytic and hydrocarbon-oxidizing activity. A total of 21 pure cultures were isolated. The phylogenetic position of the obtained bacterial isolates was determined based on the analysis of 16S rRNA gene sequences. The strains isolated on selective media belonged to representatives of the genera Pseudomonas and Aeromonas (Gammaproteobacteria), and the genus Microvirgula (Betaproteobacteria). The ability of strains to grow on culture media containing pork fat, olive oil and diesel fuel was analyzed. The lipolytic activity of the isolates was evidenced by cultivation on a diagnostic medium containing 1 % tributyrin. The phylogenetic and metabolic diversity of the cultivated non-pathogenic bacterial strains with lipolytic and oil-oxidizing activity revealed in the study indicates the biotechnological potential of the isolates. The most promising strains were M. aerodenitrificans sp. LM1 and P. lini sp. KGS5K3, which not only exhibited lipolytic activity on the diagnostic medium with tributyrin in a wide temperature range, but also utilized diesel fuel, pork fat and olive oil.

Extremophilic lipases for industrial applications: A general review

With industrialization and development in modern science enzymes and their applications increased widely. There is always a hunt for new proficient enzymes with novel properties to meet specific needs of various industrial sectors. Along with the high efficiency, the green and eco-friendly side of enzymes attracts human attention, as they form a true answer to counter the hazardous and toxic conventional industrial catalyst. Lipases have always earned industrial attention due to the broad range of hydrolytic and synthetic reactions they catalyse. When these catalytic properties get accompanied by features like temperature stability, pH stability, and solvent stability lipases becomes an appropriate tool for use in many industrial processes. Extremophilic lipases offer the same, thermostable: hot and cold active thermophilic and psychrophilic lipases, acid and alkali resistant and active acidophilic and alkaliphilic lipases, and salt tolerant halophilic lipases form excellent biocatalyst for detergent formulations, biofuel synthesis, ester synthesis, food processing, pharmaceuticals, leather, and paper industry. An interesting application of these lipases is in the bioremediation of lipid waste in harsh environments. The review gives a brief account on various extremophilic lipases with emphasis on thermophilic, psychrophilic, halophilic, alkaliphilic, and acidophilic lipases, their sources, biochemical properties, and potential applications in recent decades.

Insights into plastic biodegradation: community composition and functional capabilities of the superworm (Zophobas morio) microbiome in styrofoam feeding trials

Plastics are inexpensive and widely used organic polymers, but their high durability hinders biodegradation. Polystyrene, including extruded polystyrene (also known as styrofoam), is among the most commonly produced plastics worldwide and is recalcitrant to microbial degradation. In this study, we assessed changes in the gut microbiome of superworms (Zophobas morio) reared on bran, polystyrene or under starvation conditions over a 3 weeks period. Superworms on all diets were able to complete their life cycle to pupae and imago, although superworms reared on polystyrene had minimal weight gains, resulting in lower pupation rates compared to bran reared worms. The change in microbial gut communities from baseline differed considerably between diet groups, with polystyrene and starvation groups characterized by a loss of microbial diversity and the presence of opportunistic pathogens. Inferred microbial functions enriched in the polystyrene group included transposon movements, membrane restructuring and adaptations to oxidative stress. We detected several encoded enzymes with reported polystyrene and styrene degradation abilities, supporting previous reports of polystyrene-degrading bacteria in the superworm gut. By recovering metagenome-assembled genomes (MAGs) we linked phylogeny and functions and identified genera including Pseudomonas, Rhodococcus and Corynebacterium that possess genes associated with polystyrene degradation. In conclusion, our results provide the first metagenomic insights into the metabolic pathways used by the gut microbiome of superworms to degrade polystyrene. Our results also confirm that superworms can survive on polystyrene feed, but this diet has considerable negative impacts on host gut microbiome diversity and health.

A Valuable Product of Microbial Cell Factories: Microbial Lipase

As a powerful factory, microbial cells produce a variety of enzymes, such as lipase. Lipase has a wide range of actions and participates in multiple reactions, and they can catalyze the hydrolysis of triacylglycerol into its component free fatty acids and glycerol backbone. Lipase exists widely in nature, most prominently in plants, animals and microorganisms, among which microorganisms are the most important source of lipase. Microbial lipases have been adapted for numerous industrial applications due to their substrate specificity, heterogeneous patterns of expression and versatility (i.e., capacity to catalyze reactions at the extremes of pH and temperature as well as in the presence of metal ions and organic solvents). Now they have been introduced into applications involving the production and processing of food, pharmaceutics, paper making, detergents, biodiesel fuels, and so on. In this mini-review, we will focus on the most up-to-date research on microbial lipases and their commercial and industrial applications. We will also discuss and predict future applications of these important technologies.

Identification of functional cytochrome P450 and ferredoxin from Streptomyces sp. EAS-AB2608 by transcriptional analysis and their heterologous expression

Bioconversion using microorganisms and their enzymes is an important tool in many industrial fields. The discovery of useful new microbial enzymes contributes to the development of industries utilizing bioprocesses. Streptomyces sp. EAS-AB2608, isolated from a soil sample collected in Japan, can convert the tetrahydrobenzotriazole CPD-1 (a selective positive allosteric modulator of metabotropic glutamate receptor 5) to its hydroxylated form at the C4-(R) position. The current study was performed to identify the genes encoding the enzymes involved in CPD-1 bioconversion and to verify their function. To identify gene products responsible for the conversion of CPD-1, we used RNA sequencing to analyze EAS-AB2608; from its 8333 coding sequences, we selected two genes, one encoding cytochrome P450 (easab2608_00800) and the other encoding ferredoxin (easab2608_00799), as encoding desirable gene products involved in the bioconversion of CPD-1. The validity of this selection was tested by using a heterologous expression approach. A bioconversion assay using genetically engineered Streptomyces avermitilis SUKA24 ∆saverm3882 ∆saverm7246 co-expressing the two selected genes (strain ES_SUKA_63) confirmed that these gene products had hydroxylation activity with respect to CPD-1, indicating that they are responsible for the conversion of CPD-1. Strain ES_SUKA_63 also showed oxidative activity toward other compounds and therefore might be useful not only for bioconversion of CPD-1 but also as a tool for synthesis of drug metabolites and in optimization studies of various pharmaceutical lead compounds. We expect that this approach will be useful for bridging the gap between the latest enzyme optimization technologies and conventional enzyme screening using microorganisms. KEY POINTS: • Genes easab2608_00800 (cyp) and easab2608_00799 (fdx) were selected by RNA-Seq. • Selection validity was evaluated by an engineered S. avermitilis expression system. • Strain ES_SUKA_63 showed oxidative activity toward CPD-1 and other compounds.

Gene cloning, heterologous expression, and partial characterization of a novel cold-adapted subfamily I.3 lipase from Pseudomonas fluorescence KE38

A novel cold-active true lipase from Pseudomonas sp. KE38 was cloned, sequencing and expressed in E. coli by degenerate PCR and genome walking technique. The open reading frame of the cloned gene encoded a polypeptide chain of 617 amino acids with a confirmed molecular weight of 64 kD. Phylogenetic analysis of the deduced amino acid sequence of the lipase indicated that it had high similarity with lipases of subfamily Ι.3 of bacterial lipases. Recombinant lipase was purified in denatured form as inclusion bodies, which were then renatured by urea followed by dialysis. Lipase activity was determined titrimetrically using olive oil as substrate. The enzyme showed optimal activity at 25 °C, pH 8.5 and was highly stable in the presence of various metal ions and organic solvents. Low optimal temperature and high activity in the presence of methanol and ethanol make this lipase a potential candidate for transesterification reactions and biodiesel production.

The use of response surface methodology for enhanced production of a thermostable bacterial lipase in a novel yeast system

A thermostable bacterial lipase from Geobacillus zalihae was expressed in a novel yeast Pichia sp. strain SO. The preliminary expression was too low and discourages industrial production. This study sought to investigate the optimum conditions for T1 lipase production in Pichia sp. strain SO. Seven medium conditions were investigated and optimized using Response Surface Methodology (RSM). Five responding conditions namely; temperature, inoculum size, incubation time, culture volume and agitation speed observed through Plackett-Burman Design (PBD) method had a significant effect on T1 lipase production. The medium conditions were optimized using Box-Behnken Design (BBD). Investigations reveal that the optimum conditions for T1 lipase production and Biomass concentration (OD₆₀₀) were; Temperature 31.76 °C, incubation time 39.33 h, culture volume 132.19 mL, inoculum size 3.64%, and agitation speed of 288.2 rpm with a 95% PI low as; 12.41 U/mL and 95% PI high of 13.65 U/mL with an OD₆₀₀ of; 95% PI low as; 19.62 and 95% PI high as; 22.62 as generated by the software was also validated. These predicted parameters were investigated experimentally and the experimental result for lipase activity observed was 13.72 U/mL with an OD₆₀₀ of 24.5. At these optimum conditions, there was a 3-fold increase on T1 lipase activity. This study is the first to develop a statistical model for T1 lipase production and biomass concentration in Pichia sp. Strain SO. The optimized production of T1 lipase presents a choice for its industrial application.

PmrA/PmrB Two-Component System Regulation of lipA Expression in Pseudomonas aeruginosa PAO1

Pseudomonas lipases are well-studied, but few studies have examined the mechanisms of lipase expression regulation. As a global regulatory protein, PmrA controls the expression of multiple genes such as the Dot/Icm apparatus, eukaryotic-like proteins, and secreted effectors. In this study, the effect of PmrA on expression of the lipase lipA in Pseudomonas aeruginosa PAO1 was investigated by knocking out or overexpressing pmrA, rsmY, and rsmA. PmrA regulated the expression of lipA at both the transcriptional and translational level although translation was the pivotal regulatory mechanism for lipA expression. PmrA also regulated the expression of rsmY. Using gel mobility shift assay and pmrA/rsmY double gene knock-out model, we showed that PmrA directly bound to the promoter sequence of rsmY to regulate lipA expression. Translation of lipA was activated by the PmrA/PmrB system via RsmA. Specifically, the Shine-Dalgarno (SD) sequence located at lipA mRNA was overlapped through combination between RsmA and the AGAUGA sequence, subsequently blocking the 30S ribosomal subunit to the SD sequence, leading to translational inhibition of lipA. Transcriptional repression of RsmY initiated translation of lipA through negative translational regulation of rsmA. In conclusion, this study demonstrated that in P. aeruginosa PAO1, PmrA mainly regulated rsmY expression at a translational level to influence lipA expression. RsmY primarily activated lipA translation via negative translational regulation of rsmA.

Identification of a hot-spot to enhance Candida rugosa lipase thermostability by rational design methods

Lipase is one of the most widely used classes of enzymes in biotechnological applications and organic chemistry. Candida rugosa lipases (CRL) can catalyze hydrolysis, esterification and transesterification with high regio-, stereo- and enantio-selectivity. However, thermal inactivation above 45 °C limits CRL's applications. Studies on improving the thermal stability of CRL are often limited by its slow-growing eukaryotic expression host, which is not suitable for large-scale screening. Identification of thermally stable mutants by rational design, regarded as an efficient substitution of experimental efforts, would provide a method for site-directed improvement of CRL. In this study, mutation-induced stability changes in CRL Lip1 were predicted by three rational design methods. Followed by conservative analyses and functional region exclusion, five mutants of a hot-spot, Asp457Phe, Asp457Trp, Asp457Met, Asp457Leu, and Asp457Tyr, were identified and prepared for enzymatic characterization. These five mutants increased the apparent melting temperature of Lip1 from 7.4 °C to 9.3 °C, with the most thermostable mutant, Asp457Phe, exhibiting a 5.5-fold longer half-life at 50 °C and a 10 °C increase in optimum temperature. Furthermore, pH stability of Lip1 was also enhanced due to the introduction of Asp457Phe mutation. The study demonstrates that thermally stable mutants of CRL could be identified with limited experimental efforts using rational design methods.

The thermostability of Candida rugosa lipase expressed in a eukaryotic host is enhanced with limited experimental effort based on rational design methods.

Heterologous expression and characterization of a new lipase from Pseudomonas fluorescens Pf0-1 and used for biodiesel production

As a kind of important biocatalysts, Pseudomonas lipases are commonly applied in various industrial fields. Pflip1, a new extracellular lipase gene from Pseudomonas. fluorescens Pf0-1, was first cloned and respectively expressed in Escherichia coli BL21(DE3) and Pichia pastoris KM71, the recombinant proteins Pflip1a and Pflip1b were later purified separately. Then Pflip1a was further characterized. The optimum pH of Pflip1a was 8.0 and its optimal temperature was 70 °C. After incubation at 70 °C for 12 h, Pflip1a could retain over 95% of its original activity. It showed the highest activity towards p-nitrophenyl caprylate. Moreover, its activity was profoundly affected by metal ion, ionic surfactants and organic solvents. Furthermore, the two obtained recombinant lipases were immobilized on the magnetic nanoparticles for biodiesel preparation. The GC analysis showed that for the immobilized lipases Pflip1b and Pflip1a, the biodiesel yield within 24 h respectively attained 68.5% and 80.5% at 70 °C. The activities of the two immobilized lipases still remained 70% and 82% after 10 cycles of operations in non-solvent system. These characteristics and transesterification capacity of the recombinant protein indicated its great potential for organic synthesis, especially for biodiesel production.

Bioprospecting hot spring metagenome: lipase for the production of biodiesel

Screening of metagenomic library from Taptapani Hot Spring (Odisha) yielded a positive lipase clone (pUC-lip479). Sequence analysis showed an ORF (RK-lip479) of 416 amino acid residues which was overexpressed in Escherichia coli BL21 (DE3). Optimum pH and temperature of purified lipase RK-lip479 were 8.0 and 65 °C, respectively, and found to be stable over a pH range of 7.0-9.0 and temperatures 55-75 °C. RK-lip479 could hydrolyse a wide range of 4-nitrophenyl esters (4-nitrophenyoctanoate, 4-nitrophenyldodecanoate, 4-nitrophenylpalmitate, 4-nitrophenylmyristate and 4-nitrophenylstearate), and maximum activity was observed with 4-nitrophenyldodecanoate. RK-lip479 was resistant to many organic solvents, especially isopropanol, DMSO, methanol, DMF, ethanol, dichloromethane, acetone, glycerol and ethyl acetate. RK-lip479 also showed activity in the presence of monovalent (Na⁺ and K⁺), divalent (Mg²⁺, Mn²⁺, Ca²⁺, Hg²⁺, Cu²⁺, Co²⁺, Zn²⁺ and Ag²⁺ ) and trivalent cations (Fe³⁺ and Al³⁺). Yield of biodiesel production was in the range of 40-76% using various waste oils with RK-Lip479 under optimized conditions.

Efficient biosynthesis of ethyl (R)-4-chloro-3-hydroxybutyrate using a stereoselective carbonyl reductase from Burkholderia gladioli

Background

Ethyl (R)-4-chloro-3-hydroxybutyrate ((R)-CHBE) is a versatile chiral precursor for many pharmaceuticals. Although several biosynthesis strategies have been documented to convert ethyl 4-chloro-3-oxobutanoate (COBE) to (R)-CHBE, the catalytic efficiency and stereoselectivity are still too low to be scaled up for industrial applications. Due to the increasing demand of (R)-CHBE, it is essential to explore more robust biocatalyst capable of preparing (R)-CHBE efficiently.

Results

A stereoselective carbonyl reductase toolbox was constructed and employed into the asymmetric reduction of COBE to (R)-CHBE. A robust enzyme designed as BgADH3 from Burkholderia gladioli CCTCC M 2012379 exhibited excellent activity and enantioselectivity, and was further characterized and investigated in the asymmetric synthesis of (R)-CHBE. An economical and satisfactory enzyme-coupled cofactor recycling system was created using recombinant Escherichia coli cells co-expressing BgADH3 and glucose dehydrogenase genes to regenerate NADPH in situ. In an aqueous/octanol biphasic system, as much as 1200 mmol COBE was completely converted by using substrate fed-batch strategy to afford (R)-CHBE with 99.9 % ee at a space-time yield per gram of biomass of 4.47 mmol∙L⁻¹∙h⁻¹∙g DCW⁻¹.

Conclusions

These data demonstrate the promising of BgADH3 in practical synthesis of (R)-CHBE as a valuable chiral synthon. This study allows for the further application of BgADH3 in the biosynthesis of chiral alcohols, and establishes a preparative scale process for producing (R)-CHBE with excellent enantiopurity.

Electronic supplementary material

The online version of this article (doi:10.1186/s12896-016-0301-x) contains supplementary material, which is available to authorized users.

Draft genome sequence of Pseudomonas moraviensis strain Devor implicates metabolic versatility and bioremediation potential

Pseudomonas moraviensis is a predominant member of soil environments. We here report on the genomic analysis of Pseudomonas moraviensis strain Devor that was isolated from a gate at Oklahoma State University, Stillwater, OK, USA. The partial genome of Pseudomonas moraviensis strain Devor consists of 6016489 bp of DNA with 5290 protein-coding genes and 66 RNA genes. This is the first detailed analysis of a P. moraviensis genome. Genomic analysis revealed metabolic versatility with genes involved in the metabolism and transport of fructose, xylose, mannose and all amino acids with the exception of tryptophan and valine, implying that the organism is a versatile heterotroph. The genome of P. moraviensis strain Devor was rich in transporters and, based on COG analysis, did not cluster closely with P. moraviensis R28-S genome, the only previous report of a P. moraviensis genome with a native mercury resistance plasmid.