A high-density microelectrode-tissue-microelectrode sandwich platform for application of retinal circuit study

Hemispherical Microelectrode Array for Ex Vivo Retinal Neural Recording

To investigate the neuronal visual encoding process in the retina, researchers have performed in vitro and ex vivo electrophysiological experiments using animal retinal tissues. The microelectrode array (MEA) has become a key component in retinal experiments because it enables simultaneous neural recording from a population of retinal neurons. However, in most retinal experiments, it is inevitable that the retinal tissue is flattened on the planar MEA, becoming deformed from the original hemispherical shape. During the tissue deforming process, the retina is subjected to mechanical stress, which can induce abnormal physiological conditions. To overcome this problem, in this study, we propose a hemispherical MEA with a curvature that allows retinal tissues to adhere closely to electrodes without tissue deformation. The electrode array is fabricated by stretching a thin, flexible polydimethylsiloxane (PDMS) electrode layer onto a hemispherical substrate. To form micro patterns of electrodes, laser processing is employed instead of conventional thin-film microfabrication processes. The feasibility for neural recording from retinal tissues using this array is shown by conducting ex vivo retinal experiments. We anticipate that the proposed techniques for hemispherical MEAs can be utilized not only for ex vivo retinal studies but also for various flexible electronics.

Perforation Does Not Compromise Patterned Two-Dimensional Substrates for Cell Attachment and Aligned Spreading

Polymeric sheets were perforated by laser ablation and were uncompromised by a debris field when first treated with a thin layer of photoresist. Polymer sheets perforated with holes comprising 5, 10, and 20% of the nominal surface area were then patterned in stripes by photolithography, which was followed by synthesis in exposed regions of a cell-attractive zirconium oxide-1,4-butanediphosphonic acid interface. Microscopic and scanning electron microscopy analyses following removal of unexposed photoresist show well-aligned stripes for all levels of these perforations. NIH 3T3 fibroblasts plated on each of these perforated surfaces attached to the interface and spread in alignment with pattern fidelity in every case that is as high as that measured on a nonperforated, patterned substrate.

16-Channel biphasic current-mode programmable charge balanced neural stimulation

BACKGROUND

Neural stimulation is an important method used to activate or inhibit action potentials of the neuronal anatomical targets found in the brain, central nerve and peripheral nerve. The neural stimulator system produces biphasic pulses that deliver balanced charge into tissue from single or multichannel electrodes. The timing and amplitude of these biphasic pulses are precisely controlled by the neural stimulator software or imbedded algorithms. Amplitude mismatch between the anodic current and cathodic current of the biphasic pulse will cause permanently damage for the neural tissues. The main goal of our circuit and layout design is to implement a 16-channel biphasic current mode programmable neural stimulator with calibration to minimize the current mismatch caused by inherent complementary metal oxide semiconductor (CMOS) manufacturing processes.

METHODS

This paper presents a 16-channel constant current mode neural stimulator chip. Each channel consists of a 7-bit controllable current DAC used as sink and source current driver. To reduce the LSB quantization error and the current mismatch, an automatic calibration circuit and flow diagram is presented in this paper. There are two modes of operation of the stimulator chip-namely, stimulation mode and calibration mode. The chip also includes a digital interface used to control the stimulator parameters and calibration levels specific for each individual channel.

RESULTS

This stimulator Application Specific Integrated Circuit (ASIC) is designed and fabricated in a 0.18 μm High-Voltage CMOS technology that allows for ±20 V power supply. The full-scale stimulation current was designed to be at 1 mA per channel. The output current was shown to be constant throughout the timing cycles over a wide range of electrode load impedances. The calibration circuit was also designed to reduce the effect of CMOS process variation of the P-channel metal oxide semiconductor (PMOS) and N-channel metal oxide semiconductor (NMOS) devices that will result in charge delivery to have less than 0.13% error.

CONCLUSIONS

A 16-channel integrated biphasic neural stimulator chip with calibration is presented in this paper. The stimulator circuit design was simulated and the chip layout was completed. The chip layout was verified using design rules check (DRC) and layout versus schematic (LVS) design check using computer aided design (CAD) software. The test results we presented show constant current stimulation with charge balance error within 0.13% least-significant-bit (LSB). This LSB error was consistent throughout a variety stimulation patterns and electrode load impedances.

Modeling electrical stimulation of retinal ganglion cell with optimizing additive noises for reducing threshold and energy consumption

BACKGROUND

Epiretinal prosthesis is one device for the treatment of blindness, which target retinal ganglion cells (RGCs) by electrodes on retinal surface. The stimulating current of epiretinal prosthesis is an important factor that influences the safety threshold and visual perception. Stochastic resonance (SR) can be used to enhance the detection and transmission of subthreshold stimuli in neurons. Here, it was assumed that SR was a potential way to improve the performance of epiretinal prosthesis. The effect of noises on the response of RGCs to electrical stimulation and the energy of stimulating current was studied based on a RGC model.

METHODS

The RGC was modeled as a multi-compartment model consisting of dendrites and its branches, soma and axon. To evoke SR, a subthreshold signal, a series of bipolar rectangular pulse sequences, plus stochastic biphasic pulse sequences as noises, were used as a stimulus to the model. The SR-type behavior in the model was characterized by a "power norm" measure. To decrease energy consumption of the stimulation waveform, the stochastic biphasic pulse sequences were only added to the cathode and anode phase of the subthreshold pulse and the noise parameters were optimized by using a genetic algorithm (GA).

RESULTS

When certain intensity of noise is added to the subthreshold signal, RGC model can fire. With the noise's RMS amplitudes increased, more spikes were elicited and the curve of power norm presents the inverted U-like graph. The larger pulse width of stochastic biphasic pulse sequences resulted in higher power norm. The energy consumption and charges of the single bipolar rectangular pulse without noise in threshold level are 468.18 pJ, 15.30 nC, and after adding optimized parameters's noise to the subthreshold signal, they became 314.8174 pJ, 11.9281 nC and were reduced by 32.8 and 22.0%, respectively.

CONCLUSIONS

The SR exists in the RGC model and can enhance the representation of RGC model to the subthreshold signal. Adding the stochastic biphasic pulse sequences to the cathode and anode phase of the subthreshold signal helps to reduce stimulation threshold, energy consumption and charge of RGC stimulation. These may be helpful for improving the performance of epiretinal prosthesis.