Quantum dot therapeutics: a new class of radical therapies

Iron coupled with hydroxylamine turns on the "switch" for free radical degradation of organic pollutants under high pH conditions

Reducing iron by hydroxylamine (HA) can promote the generation of reactive oxygen species (ROS) in the Fenton reaction and play a crucial role in the degradation of organic pollutants. However, the performance of this system at wider environmental thresholds is still not sufficiently understood, especially in the highly alkaline environments resulting from human activities. Here, we assessed the impact of solution pH on organic pollutant degradation by goethite with the addition of HA and H2O2. The solid phase variation and ROS generation were analyzed using Mössbauer spectroscopy, X-ray absorption near edge structure spectroscopy, and electron paramagnetic resonance analysis. This study found that under alkaline conditions, the system can continuously scavenge organic pollutants through oxygen-mediated generation of free radicals. At lower pH levels, organic pollutant decomposition, exemplified by the breakdown of bisphenol A (BPA), is primarily driven by the Fenton reaction facilitated by iron. As pH increases, hydroxyl radical (•OH) production decreases, accompanied by decreased BPA removal efficiency. However, the removal efficiency of BPA increased significantly at pH > 9. At pH 12, the removal of BPA exceeded that of the acidic condition after one hour, which is consistent with observations in soil system studies. Unlike the Fenton reaction, which is not sensitive to oxygen content, the removal of BPA under alkaline conditions occurs only under aerobic conditions. H2O2 is hardly involved in the reaction, and the depletion of HA becomes a critical factor in the decomposition of BPA. Importantly, in contrast to acidic conditions, where the dramatic decomposition of BPA occurs mainly in the first 10 min, the decomposition of BPA under alkaline conditions continued to occur over the 2 h of observation until complete removal. For natural systems, the remediation of pollutants depends more on the active time of ROS than on their reactivity. Therefore, this idea can reference pollution remediation strategies in anthropogenically disturbed environments.

Spiky Artificial Peroxidases with V-O-Fe Pair Sites for Combating Antibiotic-Resistant Pathogens

With the sharp rise of antibiotic-resistant pathogens worldwide, it is of enormous importance to create new strategies for combating pathogenic bacteria. Here, we create an iron oxide-based spiky artificial peroxidase (POD) with V-O-Fe pair sites (V-Fe2 O3 ) for combating methicillin-resistant Staphylococcus aureus (MRSA). The experimental studies and theoretical calculations demonstrate that the V-Fe2 O3 can achieve the localized "capture and killing" bifunction from the spiky morphology and massive reactive oxygen species (ROS) production. The V-Fe2 O3 can reach nearly 100 % bacterial inhibition over a long period by efficiently oxidizing the lipid membrane. Our wound disinfection results identify that the V-Fe2 O3 can not only efficiently eliminate MRSA and their biofilm but also accelerate wound recovery without causing noticeable inflammation and toxicity. This work offers essential insights into the critical roles of V-O-Fe pair sites and localized "capture and killing" in biocatalytic disinfection and provides a promising pathway for the de novo design of efficient artificial peroxidases.

Encapsulation of thymol and menthol loaded N/S co-doped carbon dots derived from a mixture of herbal extracts as theranostic agents with anticancer properties

This research was conducted by synthesizing carbon dots MNE-CDs (mixed natural extract-carbon dots) based on mixed natural extract (ginger, garlic, turmeric) through the hydrothermal routh. Menthol and thymol were loaded as multi-therapeutic drugs with the addition of the bio-enhancer loaded on MNE-CDs with the hydrothermal method during a separate stage. These nanostructures were successfully encapsulated in chitosan by the nanospray drying method to enhance sustainability and release control. This study answered three of these issues by fabricating novel carbon dots for anticancer potential, release behavior and bioimaging at the same time. Preparation carbon dots are characterized using UV-vis, PL, FE-SEM, DLS, EDX, and FT-IR analysis. A moderate and sustained release profile of encapsulated carbon dots was noticed in comparison to the free carbon dots over 48 h of study in both simulated physicological environment (pH 7.4) and tumor tissue (pH 5.2) conditions. It was found that the release of bioactive substances from encapsulated samples was significantly attenuated. The cell viability assay showed all the samples, including free and encapsulated carbon dots, offered acceptable cytotoxicity against MCF-7 breast cancer cells. Despite this, the toxicity of free carbon dots is more than the encapsulated samples, and also the enhancement in anticancer potential was not observed for carbon dots loaded with menthol and thymol. Upon the obtained results, the synthesized fluorescence N/S co-doped carbon dots hold great anticancer potential and biological fluorescent labeling.

Quenching effect of cerium oxide nanoparticles on singlet oxygen: validation of the potential for reaction with multiple reactive oxygen species

Here we studied cerium oxide nanoparticles (nanoceria) as an agent for the future treatment of oxidative damage by validating and evaluating its scavenging activity towards reactive oxygen species (ROS) in vitro. Nanoceria has been shown to mimic the activities of superoxide dismutase and catalase, degrading superoxide (O2•-) and hydrogen peroxide (H2O2). We examined the antioxidative activity of nanoceria, focusing on its ability to quench singlet oxygen (1O2) in an aqueous solution. Electron paramagnetic resonance (EPR) was used to determine the rates of second-order reactions between nanoceria and three ROS (1O2, O2•-, and H2O2) in aqueous solution, and its antioxidative abilities were demonstrated. Nanoceria shows a wide range of ultraviolet-light absorption bands and thus 1O2 was produced directly in a nanoceria suspension using high-frequency ultrasound. The quenching or scavenging abilities of nanoceria for 1O2 and hypoxanthine-xanthine oxidase reaction-derived O2•- were examined by EPR spin-trapping methods, and the consumption of H2O2 was estimated by the EPR oximetry method. Our results indicated that nanoceria interact not only with two previously reported ROS but also with 1O2. Nanoceria were shown to degrade O2•- and H2O2, and their ability to quench 1O2 may be one mechanism by which they protect against oxidative damage such as inflammation.

Algal organic matter and dissolved Mn cooperatively accelerate 17α-ethinylestradiol photodegradation: Role of photogenerated reactive Mn(III)

Algal extracellular organic matter (EOM), a major fraction of the dissolved organic matter found in eutrophic plateau lakes, can act as a photosensitizer to drive the abiotic oxidation of Mn(II). This process has the potential to generate reactive Mn(III) and influence the fate of organic pollutants. In this study, the photodegradation of 17α-ethinylestradiol (EE2) in the presence of Mn(II) and EOM was investigated with emphasis on the photogeneration mechanism of Mn(III). The results indicated that Mn(II) can accelerate EE2 photodegradation in EOM solution owing to the photogeneration of reactive Mn(III), and the enhancement was greater at higher Mn(II) concentrations. The generation of reactive Mn(III) was mainly attributable to the action of superoxide radical generated by photosensitization of EOM. In addition, the photodegradation of EE2 was slower at higher pH, possibly because of the deactivation of Mn(III) under alkaline conditions. Single-electron transfer was an indispensable process in the photodegradation. The differences in fluorophore content, pH, and NO₃^- concentrations are all important determinants for EE2 photodegradation in natural waters. The information obtained in this research would contribute to the understanding of reactions between Mn(II) and EOM, and provide new insights into the behaviors of reactive Mn(III) in eutrophic water irradiated by sunlight.

Photoactivated antibiotics to treat intracellular infection of bacteria

Antibiotic resistance combined with pathogen internalization leads to debilitating infections. Here we test novel superoxide producing, stimuli-activated quantum dots (QDs), to treat an intracellular infection of Salmonella enterica serovar Typhimurium in an osteoblast precursor cell line. These QDs are precisely tuned to reduce dissolved oxygen to superoxide and kill bacteria upon stimulation (e.g., light). We show QDs provide tunable clearance at various multiplicities of infection and limited host cell toxicity by modulating their concentration and stimuli intensity, proving the efficacy of superoxide producing QDs for intracellular infection treatment and establishing a framework for further testing in different infection models.

Oxidative Roles of Polystyrene-Based Nanoplastics in Inducing Manganese Oxide Formation under Light Illumination

Every year, large quantities of plastics are produced and used for diverse applications, growing concerns about the waste management of plastics and their release into the environment. Plastic debris can break down into millions of pieces that adversely affect natural organisms. In particular, the photolysis of micro/nanoplastics can generate reactive oxygen species (ROS). However, their oxidative roles in initiating redox chemical reactions with heavy and transition metals have received little attention. In this study, we investigated whether the photolysis of polystyrene (PS) nanoplastics can induce the oxidation of Mn²⁺(aq) to Mn oxide solids. We found that PS nanoplastics not only produced peroxyl radicals (ROO^•) and superoxide radicals (O₂^•-) by photolysis, which both play a role in unexpected Mn oxidation, but also served as a substrate for facilitating the heterogeneous nucleation and growth of Mn oxide solids and controlling the formation rate and crystalline phases of Mn oxide solids. These findings help us to elucidate the oxidative roles of nanoplastics in the oxidation of redox-active metal ions. The production of ROS from nanoplastics in the presence of light can endanger marine life and human health, and affect the mobility of the nanoplastics in the environment via redox reactions, which in turn may negatively impact their environmental remediation.

Photochemical reactions of dissolved organic matter and bromide ions facilitate abiotic formation of manganese oxide solids

Manganese (Mn) oxide solids are ubiquitous in nature, acting as both electron donors and acceptors in diverse redox reactions in the environment. Reactions of Mn(III/IV) oxides with dissolved natural organic matter (DOM) are commonly described as reductive dissolutions that generate Mn²⁺(aq). In this study, we investigated the role of photochemical reactions of DOM in Mn²⁺(aq) oxidation and the resulting formation of Mn oxide solids. During the photolysis of DOM, reactive intermediates can be generated, including excited triplet state DOM (³DOM*), hydroxyl radicals (^•OH), superoxide radicals (O₂^•-), hydrogen peroxide, and singlet oxygen. Among these, we found that O₂^•- radicals were mainly responsible for Mn oxidation. The solution pH controlled the formation of Mn oxide solids by affecting both Mn²⁺ oxidation by O₂^•- during photolysis of DOM and reductive dissolutions of Mn oxide solids by DOM. Further, with the addition of bromide ions (Br^-), reactions between ³DOM* and Br^-, together with reactions between ^•OH and Br^-, can form reactive bromide radicals. The formed Br radicals also promoted Mn oxide formation. In DOM with more aromatic functional groups, more Mn²⁺ was oxidized to Mn oxide solids. This enhanced oxidation could be the result of promoted pathways from charge-transfer state DOM (DOM^•+/•-) to O₂^•-. These new observations advance our understanding of natural Mn²⁺ oxidation and Mn(III/IV) oxide formation and highlight the underappreciated oxidative roles of DOM in the oxidation of metal ions in surface water illuminated by sunlight.

Photo-oxygenation of water media using photoactive plasmonic nanocomposites

Plasmonic nanocomposites ZnO–Ag and ZnO–SnO2–Ag(AgCl) were prepared by the polymer–salt method, and their structure and morphology were studied using XRD and SEM analyses. It was found that the addition of photoactive inorganic nanocomposites ZnO–Ag and ZnO–SnO2–Ag(AgCl) in pure water significantly enhances the effectiveness of its disinfection and purification during UV treatment and provides the effective water oxygenation. Oxygen photogeneration under blue light (λex. = 405 nm) can be related to the plasmon-excitation processes in ZnO–SnO2–Ag(AgCl) composites. Prepared composites demonstrate antibacterial activity against both Gram-positive and Gram-negative bacteria. The increase of Ag content in ZnO–Ag and ZnO–SnO2–Ag(AgCl) composites significantly enhances their antibacterial activity.

Atomic-Layered Cu5 Nanoclusters on FeS2 with Dual Catalytic Sites for Efficient and Selective H2 O2 Activation

Regulating the distribution of reactive oxygen species generated from H₂ O₂ activation is the prerequisite to ensuring the efficient and safe use of H₂ O₂ in the chemistry and life science fields. Herein, we demonstrate that constructing a dual Cu-Fe site through the self-assembly of single-atomic-layered Cu₅ nanoclusters onto a FeS₂ surface achieves selective H₂ O₂ activation with high efficiency. Unlike its unitary Cu or Fe counterpart, the dual Cu-Fe sites residing at the perimeter zone of the Cu₅ /FeS₂ interface facilitate H₂ O₂ adsorption and barrierless decomposition into ⋅OH via forming a bridging Cu-O-O-Fe complex. The robust in situ formation of ⋅OH governed by this atomic-layered catalyst enables the effective oxidation of several refractory toxic pollutants across a broad pH range, including alachlor, sulfadimidine, p-nitrobenzoic acid, p-chlorophenol, p-chloronitrobenzene. This work highlights the concept of building a dual catalytic site in manipulating selective H₂ O₂ activation on the surface molecular level towards efficient environmental control and beyond.

A Water-Soluble Organic Photocatalyst Discovered for Highly Efficient Additive-Free Visible-Light-Driven Grafting of Polymers from Proteins at Ambient and Aqueous Environments

Since the pioneering discovery of a protein bound to poly(ethylene glycol), the utility of protein-polymer conjugates (PPCs) is rapidly expanding to currently emerging applications. Photoinduced energy/electron-transfer reversible addition-fragmentation chain-transfer (PET-RAFT) polymerization is a very promising method to prepare structurally well-defined PPCs, as it eliminates high-cost and time-consuming deoxygenation processes due to its oxygen tolerance. However, the oxygen-tolerance behavior of PET-RAFT polymerization is not well-investigated in aqueous environments, and thereby the preparation of PPCs using PET-RAFT polymerization needs a substantial amount of sacrificial reducing agents or inert-gas purging processes. Herein a novel water-soluble and biocompatible organic photocatalyst (PC) is reported, which enables visible-light-driven additive-free "grafting-from" polymerizations of a protein in ambient and aqueous environments. Interestingly, the developed PC shows unconventional "oxygen-acceleration" behavior for a variety of acrylic and acrylamide monomers in aqueous conditions without any additives, which are apparently distinct from previously reported systems. With such a PC, "grafting-from" polymerizations are successfully performed from protein in ambient buffer conditions under green light-emitting diode (LED) irradiation, which result in various PPCs that have neutral, anionic, cationic, and zwitterionic polyacrylates, and polyacrylamides. It is believed that this PC will be widely employed for a variety of photocatalysis processes in aqueous environments, including the living cell system.

Regulation of photo triggered cytotoxicity in electrospun nanomaterials: role of photosensitizer binding mode and polymer identity

Although electrospun nanomaterials containing photoactive dyes currently compete with the present state of art antimicrobial materials, relatively few structure-activity relationships have been established to identify the role of carrier polymer and photosensitizer binding mode on the performance of the materials. In this study scaffolds composed of poly(vinyl alcohol), polyacrylonitrile, poly(caprolactone), and tailor-made phthalocyanine-based photosensitizers are developed utilizing electrospinning as a simple, time and cost-effective method. The photoinduced activity of nanofibrous materials was characterized in vitro against E. coli and B. subtilis as models for Gram-negative and Gram-positive bacteria respectively, as well as against bacteriophages phi6 and MS2 as models for enveloped and non-enveloped viruses respectively. For the first time, we show how polymer-specific properties affect antifouling and antimicrobial activity of the nanofibrous material, indicating that the most promising way to increase efficiency is likely via methods that focus on increasing the number of short, but strong and reversible bacteria-surface interactions.

Does Tert-Butyl Alcohol Really Terminate the Oxidative Activity of •OH in Inorganic Redox Chemistry?

The hydroxyl radical, ^•OH, is one of the most reactive free radicals and plays significant roles in the oxidative degradation of organic pollutants and the electron transfer of inorganic ions in natural and engineered environmental processes. To quantitatively determine the contribution of ^•OH to oxidative reactions, a specific scavenger, such as tert-butyl alcohol (TBA), is usually added to eliminate ^•OH effects. Although TBA is commonly assumed to transform ^•OH into oxidatively inert products, this study demonstrates that utilizing TBA as an ^•OH scavenger generates the secondary peroxyl radical (ROO^•), influencing the oxidation of transition metals, such as Mn. Although ROO^• is less reactive than ^•OH, it has an extended half-life and a longer diffusion distance that enables more redox reactions, such as the oxidation of Mn²⁺(aq) to Mn^IV oxide solids. In addition to promoting Mn²⁺(aq) oxidation kinetics, TBA can also affect the crystalline phases, oxidation states, and morphologies of Mn oxide solids. Thus, the oxidative roles of ^•OH in aqueous redox reactions cannot be examined simply by adding TBA: the effects of secondary ROO^• must also be considered. This study urges a closer look at the potential formation of secondary radicals during scavenged oxidative reactions in environmental systems.

Photoactivated Indium Phosphide Quantum Dots Treat Multidrug-Resistant Bacterial Abscesses In Vivo

The increasing prevalence of drug-resistant bacterial strains is causing illness and death in an unprecedented number of people around the globe. Currently implemented small-molecule antibiotics are both increasingly less efficacious and perpetuating the evolution of resistance. Here, we propose a new treatment for drug-resistant bacterial infection in the form of indium phosphide quantum dots (InP QDs), semiconductor nanoparticles that are activated by light to produce superoxide. We show that the superoxide generated by InP QDs is able to effectively kill drug-resistant bacteria in vivo to reduce subcutaneous abscess infection in mice without being toxic to the animal. Our InP QDs are activated by near-infrared wavelengths with high transmission through skin and tissues and are composed of biocompatible materials. Body weight and organ tissue histology show that the QDs are nontoxic at a macroscale. Inflammation and oxidative stress markers in serum demonstrate that the InP QD treatment did not result in measurable effects on mouse health at concentrations that reduce drug-resistant bacterial viability in subcutaneous abscesses. The InP QD treatment decreased bacterial viability by over 3 orders of magnitude in subcutaneous abscesses formed in mice. These InP QDs thus provide a promising alternative to traditional small-molecule antibiotics, with the potential to be applied to a wide variety of infection types, including wound, respiratory, and urinary tract infections.

Advances in Drug Delivery Nanosystems Using Graphene-Based Materials and Carbon Nanotubes

Carbon is one of the most abundant elements on Earth. In addition to the well-known crystallographic modifications such as graphite and diamond, other allotropic carbon modifications such as graphene-based nanomaterials and carbon nanotubes have recently come to the fore. These carbon nanomaterials can be designed to help deliver or target drugs more efficiently and to innovate therapeutic approaches, especially for cancer treatment, but also for the development of new diagnostic agents for malignancies and are expected to help combine molecular imaging for diagnosis with therapies. This paper summarizes the latest designed drug delivery nanosystems based on graphene, graphene quantum dots, graphene oxide, reduced graphene oxide and carbon nanotubes, mainly for anticancer therapy.

Shining light on transition metal sulfides: New choices as highly efficient antibacterial agents

Globally, millions of people die of microbial infection-related diseases every year. The more terrible situation is that due to the overuse of antibiotics, especially in developing countries, people are struggling to fight with the bacteria variation. The emergence of super-bacteria will be an intractable environmental and health hazard in the future unless novel bactericidal weapons are mounted. Consequently, it is critical to develop viable antibacterial approaches to sustain the prosperous development of human society. Recent researches indicate that transition metal sulfides (TMSs) represent prominent bactericidal application potential owing to the meritorious antibacterial performance, acceptable biocompatibility, high solar energy utilization efficiency, and excellent photo-to-thermal conversion characteristics, and thus, a comprehensive review on the recent advances in this area would be beneficial for the future development. In this review article, we start with the antibacterial mechanisms of TMSs to provide a preliminary understanding. Thereafter, the state-of-the-art research progresses on the strategies for TMSs materials engineering so as to promote their antibacterial properties are systematically surveyed and summarized, followed by a summary of the practical application scenarios of TMSs-based antibacterial platforms. Finally, based on the thorough survey and analysis, we emphasize the challenges and future development trends in this area.

Gold nanoclusters cause selective light-driven biochemical catalysis in living nano-biohybrid organisms

Living nano-biohybrid organisms or nanorgs combine the specificity and well-designed surface chemistry of an enzyme catalyst site, with the strong light absorption and efficient charge injection (for biocatalytic reaction) from inorganic materials. Previous efforts in harvesting sunlight for renewable and sustainable photochemical conversion of inexpensive feedstocks to biochemicals using nanorgs focused on the design of semiconductor nanoparticles or quantum dots (QDs). However, metal nanoparticles and nanoclusters (NCs), such as gold (Au), offer strong light absorption properties and biocompatibility for potential application in living nanorgs. Here we show that optimized, sub-1 nanometer Au NCs-nanorgs can carry out selective biochemical catalysis with high turnover number (10⁸ mol mol^-1 of cells) and turnover frequency (>2 × 10⁷ h^-1). While the differences of size, light absorption, and electrochemical properties between these NCs (with 18, 22, and 25 atoms) are small, large differences in their light-activated properties dictate that 22 atom Au NCs are best suited for forming living nanorgs to drive photocatalytic ammonia production from air. Based on our experiments, these Au₂₂ NC-nanorgs demonstrate 29.3% quantum efficiency of converting absorbed photons to the desired chemical, and 12.9% efficiency of photon-to-fuel conversion based on energy input-output. Further, by comparing the light-driven ammonia production yield between strains producing Mo-Fe nitrogenase with and without histidine tags, we demonstrate that preferential coupling of Au NCs to the nitrogenase through Au-histidine interactions is crucial for effective electron transfer and subsequent product generation. Together, these results provide the design rules for forming Au NCs-nanorgs and can have important implications for carrying out light-driven biochemical catalysis for renewable solar fuel generation.

Photo/electrocatalysis and photosensitization using metal nanoclusters for green energy and medical applications

Owing to the rapidly increasing demand for sustainable technologies in fields such as energy, environmental science, and medicine, nanomaterial-based photo/electrocatalysis has received increasing attention. Recently, synthetic innovations have allowed the fabrication of atomically precise metal nanoclusters (NCs). These NCs show potential for green energy and medical applications. The present article primarily focuses on evaluation of the recent developments in the photo/electrocatalytic and photosensitizing characteristics of metal and alloy NCs. The review comprises two sections: (i) photo/electrocatalysis for green energy and (ii) photosensitization for biomedical therapy applications. Finally, the challenges associated with the use of metal NCs are presented on the basis of current developments.

Resazurin-Based Assay to Evaluate Cell Viability After Quantum Dot Interaction

The increasing applications of quantum dots (QDs) as optic tools in life science have stimulated researchers to evaluate the effects of these nanoprobes in cell viability using a variety of methods, especially colorimetric ones. One of the most applied tests is the MTT assay. In comparison to MTT, for example, the resazurin-based method has the main advantage of not evaluating the cells directly, thus eliminating false-positive results that may arise from the overlap of the absorbances of the QD with the colorimetric compound. Therefore, herein, we describe the resazurin assay as an alternative, simple, quick, sensitivity, reproducible, and nontoxic test to evaluate the in vitro cell viability after QD exposure. Moreover, this test presents an additional advantage; the cells remain viable for complementary experimental procedures, such as cell migration or adhesion.