An efficient method for markerless mutant generation by allelic exchange in Clostridium acetobutylicum and Clostridium saccharobutylicum using suicide vectors

Improvement of the Genome Editing Tools Based on 5FC/5FU Counter Selection in Clostridium acetobutylicum

Several genetic tools have been developed for genome engineering in Clostridium acetobutylicum utilizing 5-fluorouracil (5FU) or 5-fluorocytosine (5FC) resistance as a selection method. In our group, a method based on the integration, by single crossing over, of a suicide plasmid (pCat-upp) followed by selection for the second crossing over using a counter-selectable marker (the upp gene and 5FU resistance) was recently developed for genome editing in C. acetobutylicum. This method allows genome modification without leaving any marker or scar in a strain of C. acetobutylicum that is ∆upp. Unfortunately, 5FU has strong mutagenic properties, inducing mutations in the strain's genome. After numerous applications of the pCat-upp/5FU system for genome modification in C. acetobutylicum, the CAB1060 mutant strain became entirely resistant to 5FU in the presence of the upp gene, resulting in failure when selecting on 5FU for the second crossing over. It was found that the potential repressor of the pyrimidine operon, PyrR, was mutated at position A115, leading to the 5FU resistance of the strain. To fix this problem, we created a corrective replicative plasmid expressing the pyrR gene, which was shown to restore the 5FU sensitivity of the strain. Furthermore, in order to avoid the occurrence of the problem observed with the CAB1060 strain, a preventive suicide plasmid, pCat-upp-pyrR*, was also developed, featuring the introduction of a synthetic codon-optimized pyrR gene, which was referred to as pyrR* with low nucleotide sequence homology to pyrR. Finally, to minimize the mutagenic effect of 5FU, we also improved the pCat-upp/5FU system by reducing the concentration of 5FU from 1 mM to 5 µM using a defined synthetic medium. The optimized system/conditions were used to successfully replace the ldh gene by the sadh-hydG operon to convert acetone into isopropanol.

Effect of spo0A, sigE, sigG, and sigK disruption on butanol production and spore formation in Clostridium saccharoperbutylacetonicum strain N1-4 (ATCC13564)

Clostridium saccharoperbutylacetonicum strain N1-4 (ATCC13564) is a butanol-producing strain suitable for application to butanol production from cellulosic materials by co-culture with cellulolytic and thermophilic species, such as Hungateiclostridium thermocellum (synonym: Clostridium thermocellum). The optimal temperature for butanol production by strain N1-4 is 30 °C, and the strain is sensitive to a high culture temperature of 37 °C. Given that spore formation is observed at high frequency when strain N1-4 is cultivated at 37 °C, we assumed in a previous study that the initiation of sporulation is related to a decrease in butanol production. Therefore, to investigate the relationship between butanol production and spore formation, we generated strain N1-4 isolates in which genes related to spore formation were disrupted. The sporulation-related gene disruptants of spo0A, sigE, sigG, and sigK lost the ability to produce heat-resistant spores, irrespective of the culture temperature. Among the gene disruptants produced, only the spo0A disruptant lost butanol-producing ability when cultivated at 30 °C. Interestingly, the sigE disruptant maintained butanol productivity similar to that observed at 30 °C, even when cultivated at 37 °C. In addition, the sigE disruptant successfully produced butanol from Avicel cellulose by co-culture with H. thermocellum at a fermentation temperature of 37 °C.

Development of an efficient ClosTron system for gene disruption in Ruminiclostridium papyrosolvens

Ruminiclostridium papyrosolvens is an anaerobic, mesophilic, and cellulolytic clostridia, promising consolidated bioprocessing (CBP) candidate for producing renewable green chemicals from cellulose, but its metabolic engineering is limited by lack of genetic tools. Here, we firstly employed the endogenous xylan-inducible promoter to control ClosTron system for gene disruption of R. papyrosolvens. The modified ClosTron can be easily transformed into R. papyrosolvens and specifically disrupt targeting genes. Furthermore, a counter selectable system based on uracil phosphoribosyl-transferase (Upp) was successfully established and introduced into the ClosTron system, which resulted in plasmid curing rapidly. Thus, the combination of xylan-inducible ClosTron and upp-based counter selectable system makes the gene disruption more efficient and convenient for successive gene disruption in R. papyrosolvens. KEY POINTS: • Limiting expression of LtrA enhanced the transformation of ClosTron plasmids in R. papyrosolvens. • DNA targeting specificity can be improved by precise management of the expression of LtrA. • Curing of ClosTron plasmids was achieved by introducing the upp-based counter selectable system.

Anti-tumor effect of infant-derived Enterococcus via the inhibition of proliferation and inflammation as well as the promotion of apoptosis

Probiotic Enterococcus hirae WEHI01 and Enterococcus faecium WEFA23 from infants were previously found to effectively inhibit the development of melanoma. In this study, their immunomodulatory and antitumor mechanisms were systemically studied. In vitro assay showed that E. hirae WEHI01 and E. faecium WEFA23 achieved biphasic immune regulation, which was revealed by the activation of resting spleen lymphocytes and RAW264.7 macrophages, as well as the anti-inflammation effect when immune cells were treated with LPS. The antitumor effects of E. hirae WEHI01 and E. faecium WEFA23 in vitro and vivo were then investigated. CCK8 and the cell scratch assay showed that the conditioned media, which were co-incubated with Enterococcus and spleen lymphocytes, significantly inhibited the proliferation and migration of B16F10, HepG-2 and HT-29 cells. The results of the tumor-bearing mice model experiment showed that E. faecium WEFA23 inhibition of the growth of tumors in mice, and the anti-tumor mechanism involved three aspects, namely tumor proliferation (decreasing expressions of LDHA, VEGF, MMP2, MMP9 and HIF-1α), inhibition of the pro-inflammation state (decreasing expressions of IL-6, TGF-β and IL-17) and the promotion of apoptosis (increasing expression of Bax/Bcl-2, caspase-3 and p53). The results suggest that the two strains of Enterococcus could be promising candidates for treating melanoma with a highly inhibitory effect.

Clostridium beijerinckii strain degeneration is driven by the loss of Spo0A activity

Solventogenic clostridia represent a diverse group of anaerobic, spore-forming bacteria capable of producing acetone, butanol and ethanol through their unique biphasic metabolism. An intrinsic problem with these organisms however is their tendency to degenerate when repeatedly subcultured or when grown continuously. This phenomenon sees cells lose their ability to produce solvents and spores, posing a significant problem for industrial applications. To investigate the mechanistic and evolutionary basis of degeneration we combined comparative genomics, ultra-deep sequencing, and concepts of sociomicrobiology using Clostridium beijerinckii NCIMB 8052 as our model organism. These approaches revealed spo0A, the master regulator gene involved in spore and solvent formation, to be key to the degeneration process in this strain. Comparative genomics of 71 degenerate variants revealed four distinct hotspot regions that contained considerably more mutations than the rest of the genome. These included spo0A as well as genes suspected to regulate its expression and activity. Ultra-deep sequencing of populations during the subculturing process showed transient increases in mutations we believe linked to the spo0A network, however, these were ultimately dominated by mutations in the master regulator itself. Through frequency-dependent fitness assays, we found that spo0A mutants gained a fitness advantage, relative to the wild type, presumably allowing for propagation throughout the culture. Combined, our data provides new insights into the phenomenon of clostridial strain degeneration and the C. beijerinckii NCIMB 8052 solvent and spore regulation network.

Emerging technologies for genetic modification of solventogenic clostridia: From tool to strategy development

Solventogenic clostridia has been considered as one of the most potential microbial cell factories for biofuel production in the biorefinery industry. However, the inherent shortcomings of clostridia strains such as low productivity, by-products formation and toxic tolerance still strongly restrict the large-scale application. Therefore, concerns regarding the genetic modification of solventogenic clostridia have spurred interests into the development of modern gene-editing tools. In this review, we summarize the latest advances of genetic tools involved in modifying solventogenic clostridia. Following a systematic comparison on their respective characteristics, we then review the corresponding strategies for overcoming the obstacles to the enhanced production. Discussing the progress of other microbial cell factories for solventogenesis, we finally describe the key challenges and trends with valuable recommendations for future large-scale biosolvent industrial application.

Sporulation in solventogenic and acetogenic clostridia

The Clostridium genus harbors compelling organisms for biotechnological production processes; while acetogenic clostridia can fix C1-compounds to produce acetate and ethanol, solventogenic clostridia can utilize a wide range of carbon sources to produce commercially valuable carboxylic acids, alcohols, and ketones by fermentation. Despite their potential, the conversion by these bacteria of carbohydrates or C1 compounds to alcohols is not cost-effective enough to result in economically viable processes. Engineering solventogenic clostridia by impairing sporulation is one of the investigated approaches to improve solvent productivity. Sporulation is a cell differentiation process triggered in bacteria in response to exposure to environmental stressors. The generated spores are metabolically inactive but resistant to harsh conditions (UV, chemicals, heat, oxygen). In Firmicutes, sporulation has been mainly studied in bacilli and pathogenic clostridia, and our knowledge of sporulation in solvent-producing or acetogenic clostridia is limited. Still, sporulation is an integral part of the cellular physiology of clostridia; thus, understanding the regulation of sporulation and its connection to solvent production may give clues to improve the performance of solventogenic clostridia. This review aims to provide an overview of the triggers, characteristics, and regulatory mechanism of sporulation in solventogenic clostridia. Those are further compared to the current knowledge on sporulation in the industrially relevant acetogenic clostridia. Finally, the potential applications of spores for process improvement are discussed.Key Points• The regulatory network governing sporulation initiation varies in solventogenic clostridia.• Media composition and cell density are the main triggers of sporulation.• Spores can be used to improve the fermentation process.

Improved CRISPR/Cas9 Tools for the Rapid Metabolic Engineering of Clostridium acetobutylicum

Clustered regularly interspaced short palindromic repeats (CRISPR)/Cas (CRISPR-associated proteins)9 tools have revolutionized biology-several highly efficient tools have been constructed that have resulted in the ability to quickly engineer model bacteria, for example, Escherichia coli. However, the use of CRISPR/Cas9 tools has lagged behind in non-model bacteria, hampering engineering efforts. Here, we developed improved CRISPR/Cas9 tools to enable efficient rapid metabolic engineering of the industrially relevant bacterium Clostridium acetobutylicum. Previous efforts to implement a CRISPR/Cas9 system in C. acetobutylicum have been hampered by the lack of tightly controlled inducible systems along with large plasmids resulting in low transformation efficiencies. We successfully integrated the cas9 gene from Streptococcuspyogenes into the genome under control of the xylose inducible system from Clostridium difficile, which we then showed resulted in a tightly controlled system. We then optimized the length of the editing cassette, resulting in a small editing plasmid, which also contained the upp gene in order to rapidly lose the plasmid using the upp/5-fluorouracil counter-selection system. We used this system to perform individual and sequential deletions of ldhA and the ptb-buk operon.

Adaptation and application of a two-plasmid inducible CRISPR-Cas9 system in Clostridium beijerinckii

Recent developments in CRISPR technologies have opened new possibilities for improving genome editing tools dedicated to the Clostridium genus. In this study we adapted a two-plasmid tool based on this technology to enable scarless modification of the genome of two reference strains of Clostridium beijerinckii producing an Acetone/Butanol/Ethanol (ABE) or an Isopropanol/Butanol/Ethanol (IBE) mix of solvents. In the NCIMB 8052 ABE-producing strain, inactivation of the SpoIIE sporulation factor encoding gene resulted in sporulation-deficient mutants, and this phenotype was reverted by complementing the mutant strain with a functional spoIIE gene. Furthermore, the fungal cellulase-encoding celA gene was inserted into the C. beijerinckii NCIMB 8052 chromosome, resulting in mutants with endoglucanase activity. A similar two-plasmid approach was next used to edit the genome of the natural IBE-producing strain C. beijerinckii DSM 6423, which has never been genetically engineered before. Firstly, the catB gene conferring thiamphenicol resistance was deleted to make this strain compatible with our dual-plasmid editing system. As a proof of concept, our dual-plasmid system was then used in C. beijerinckii DSM 6423 ΔcatB to remove the endogenous pNF2 plasmid, which led to a sharp increase of transformation efficiencies.