Hamstrings force-length relationships and their implications for angle-specific joint torques: a narrative review

The relationship between hamstring strength tests and sprint performance in female Gaelic footballers: A correlation and linear regression analysis

OBJECTIVES

To investigate the relationships between handheld dynamometer (HHD), isokinetic and Nordic hamstrings exercise (NHE) measurements of knee flexor strength and their association with sprinting performance.

DESIGN

Cross-sectional.

METHODS

The relationships between HHD (prone isometric, prone break and supine break knee flexor strength tests), isokinetic and NHE peak knee flexor strength measures were examined using Pearson product correlations on 38 female footballers. A linear regression analysis was also performed for each pair of dependent variables (10 and 30 metre sprint times) and independent predictor variables (average relative peak torque for HHD, isokinetic and NHE testing).

RESULTS

There were good correlations between HHD tests (r = 0.81-0.90, p < 0.001, R2 = 0.65-0.82), moderate correlations between HHD and isokinetic peak torque, (r = 0.61-0.67, p < 0.001, R2 = 0.37-0.44) and poor association between the HHD peak torques and isokinetic work (r = 0.44-0.46, p = 0.005-0.007, R2 = 0.20-0.21) and average power (r = 0.39-0.45, n = 36, p = 0.006-0.019, R2 = 0.15-0.22). There was a poor association between NHE peak torque and isokinetic total work (r = 0.34, p = 0.04, R2 = 0.12). No associations between knee flexor strength and sprint times were observed (p = 0.12-0.79, r2 = 0.002-0.086).

CONCLUSIONS

Moderate to good correlations within HHD testing and poor to moderate correlations between HHD and isokinetic testing were observed. HHD knee flexor torque assessment may be useful to regularly chart the progress of hamstring rehabilitation for female footballers. Knee flexor strength assessments were not associated with sprint times in female footballers. Other aspects of knee flexor strength and sprint performance should be investigated to assist clinicians in making return to running and sprinting decisions in this population.

Stress-strain relationship of individual hamstring muscles: A human cadaver study

The incidence of hamstring muscle strain varies among muscles, suggesting that the mechanical stresses associated with elongation may differ among muscles. However, the passive mechanical properties of whole human muscles have rarely been directly measured and clarified. This study aimed to clarify the stress-strain relationship of the hamstring muscles using a soft-embalmed Thiel cadaver. The long heads of the biceps femoris (BFlh), semimembranosus (SM), and semitendinosus (ST) muscles were dissected from eight cadavers. The proximal and distal hamstring tendons were affixed to the mechanical testing machine. Slack length was defined as the muscle length at the initial loading point detected upon the application of a tensile load. Muscle length was measured using a tape measure, and the anatomical cross-sectional area (ACSA) of the muscle was measured at the proximal and distal sites using B-mode ultrasonography. In the loading protocol, the muscle was elongated from its slack length to a maximum of 8% strain at an average rate of 0.83 L0/s, and the amount of displacement and tensile load were measured for each muscle. Further, the strain (%, displacement/slack muscle length) and stress (kPa, tensile load/ACSA) were calculated to evaluate the mechanical properties. Two-way repeated-measures analysis of variance (ANOVA) was used to compare stress changes with increasing muscle strain. A significant interaction between the muscle and strain factors was observed with respect to stress. Post-hoc tests revealed higher stresses in the BFlh and SM than in ST after 3% strain (P < 0.01). However, no significant differences were observed between the BFlh and SM groups. At 8% strain, the BFlh, SM, and ST exhibited stresses of 63.7 ± 12.1, 53.7 ± 23.2, and 21.0 ± 11.9 kPa, respectively. The results indicate that the stress changes associated with muscle strain differed among muscles. In particular, the stress applied to the three muscles at the same strain was found to be higher in the BFlh and SM. Thus, these findings suggest that increased mechanical stress during elongation may contribute to the frequent occurrence of muscle strain in BFlh and SM.

Effect of a graded running race on lower limb muscle damage, jump performance and muscle soreness in men and women

PURPOSE

Delayed structural and functional recovery after a 20 km graded running race was analyzed with respect to the sex effect.

METHODS

Thirteen female and 14 male recreational runners completed the race and three test sessions: one before (PRE) and two after, once on Day 1 or 2 (D1-2) and then on Day 3 or 4 (D3-4). Muscle damage was assessed indirectly using ultrasonography to quantify changes in cross-sectional area (CSA) of 10 lower-limb muscles. Delayed onset of muscle soreness (DOMS) was assessed for three muscle groups. Functional recovery was quantified by kinetic analysis of a squat jump (SJ) and a drop jump (DJ) test performed on a sledge ergometer. Linear mixed models were used to assess control group reproducibility and recovery patterns according to sex.

RESULTS

Regardless of sex, DOMS peaked at D1-2 for all muscle groups and resolved at D3-4. CSA was increased in each muscle group until D3-4, especially in the semimembranosus muscle. A specific increase was found in the short head of the biceps femoris in women. Regardless of sex, SJ and DJ performances declined up to D3-4. Depending on the muscle, positive and/or negative correlations were found between structural and functional changes. Some of these were sex-specific.

CONCLUSION

Structural and functional recovery was incomplete in both sexes up to D3-4, although DOMS had disappeared. More emphasis should be placed on hamstring muscle recovery. Highlighting the intermuscular compensations that can occur during multi-joint testing tasks, the structural-functional relationships were either positive or negative, muscle- and sex-dependent.

Does Pelvic Tilt Angle Influence the Isokinetic Strength of the Hip and Knee Flexors and Extensors?

The purpose of this study was to examine the effect of pelvic tilt angle on maximum hip and knee muscles' strength and antagonist/agonist strength ratios. Twenty-one young males and females performed maximum isokinetic concentric knee extension-flexion and hip extension-flexion efforts at 60°·s-1, 120°·s-1, and 180°·s-1 from three positions: anterior, neutral, and posterior pelvic tilt. Peak torques and knee flexor-to-extensor and hip flexor-to-extensor torque ratios were analyzed. An analysis of variance showed that peak hip extensor torque was significantly greater in the anterior pelvic tilt condition compared to either neutral or posterior pelvic tilt angles (p > 0.05). No effects of changing pelvic tilt angle on hip flexor, knee flexor, or knee extension values were found (p > 0.05). The hip flexor-to-extensor torque ratio decreased (p < 0.05) in the anterior pelvic tilt position relative to the other positions, while no difference in the knee flexor-to-extensor ratio between pelvic positions was observed (p > 0.05). This study shows that an increased anterior pelvic tilt affects the maximum isokinetic strength of the hip extensors, supporting previous suggestions regarding the link between pelvic position and hip and knee muscle function. Isokinetic testing from an anterior pelvic tilt position may alter the evaluation of hip flexion/extension strength.

Hamstring muscle injuries in athletics

Hamstring muscle injuries (HMI) are a common and recurrent issue in the sport of athletics, particularly in sprinting and jumping disciplines. This review summarizes the latest literature on hamstring muscle injuries in athletics from a clinical perspective. The considerable heterogeneity in injury definitions and reporting methodologies among studies still needs to be addressed for greater clarity. Expert teams have recently developed evidence-based muscle injury classification systems whose application could guide clinical decision-making; however, no system has been adopted universally in clinical practice, yet.The most common risk factor for HMI is a previously sustained injury, particularly early after return-to-sport. Other modifiable (e.g. weakness of thigh muscles, high-speed running exposure) and non-modifiable (e.g. older age) risk factors have limited evidence linking them to injury. Reducing injury may be achieved through exercise-based programs, but their specific components and their practical applicability remain unclear.Post-injury management follows similar recommendations to other soft tissue injuries, with a graded progression through stages of rehabilitation to full return to training and then competition, based on symptoms and clinical signs to guide the individual speed of the recovery journey. Evidence favoring surgical repair is conflicting and limited to specific injury sub-types (e.g. proximal avulsions). Further research is needed on specific rehabilitation components and progression criteria, where more individualized approaches could address the high rates of recurrent HMI. Prognostically, a combination of physical examination and magnetic resonance imaging (MRI) seems superior to imaging alone when predicting 'recovery duration,' particularly at the individual level.

Distal hamstrings tendons mechanical properties at rest and contraction using free-hand 3-D ultrasonography

Tendon properties impact human locomotion, influencing sports performance, and injury prevention. Hamstrings play a crucial role in sprinting, particularly the biceps femoris long head (BFlh), which is prone to frequent injuries. It remains uncertain if BFlh exhibits distinct mechanical properties compared to other hamstring muscles. This study utilized free-hand three-dimensional ultrasound to assess morphological and mechanical properties of distal hamstrings tendons in 15 men. Scans were taken in prone position, with hip and knee extended, at rest and during 20%, 40%, 60%, and 80% of maximal voluntary isometric contraction of the knee flexors. Tendon length, volume, cross-sectional area (CSA), and anteroposterior (AP) and mediolateral (ML) widths were quantified at three locations. Longitudinal and transverse deformations, stiffness, strain, and stress were estimated. The ST had the greatest tendon strain and the lowest stiffness as well as the highest CSA and AP and ML width strain compared to other tendons. Biceps femoris short head (BFsh) exhibited the least strain, AP and ML deformation. Further, BFlh displayed the highest stiffness and stress, and BFsh had the lowest stress. Additionally, deformation varied by region, with the proximal site showing generally the lowest CSA strain. Distal tendon mechanical properties differed among the hamstring muscles during isometric knee flexions. In contrast to other bi-articular hamstrings, the BFlh high stiffness and stress may result in greater energy absorption by its muscle fascicles, rather than the distal tendon, during late swing in sprinting. This could partly account for the increased incidence of hamstring injuries in this muscle.

Force Production and Electromyographic Activity during Different Flywheel Deadlift Exercises

This study aimed to characterize and compare force production and muscle activity during four flywheel deadlift exercises (bilateral [Bi] vs. unilateral [Uni]) with different loading conditions (vertical [Ver] vs. horizontal [Hor]). Twenty-three team-sport athletes underwent assessments for exercise kinetics (hand-grip force), along with surface electromyography (sEMG) of the proximal (BFProx) and medial biceps femoris (BFMed), semitendinosus (ST), and gluteus medius (GM). Mean and peak force were highest (p < 0.001) in Bi + Ver compared with Bi + Hor, Uni + Ver, and Uni + Hor. Although no significant differences were observed between Bi + Hor and Uni + Ver, both variants showed higher (p < 0.001) average force and peak eccentric force when compared with Uni + Hor. The presence of eccentric overload was only observed in the vertically loaded variants. Bi + Ver and Uni + Ver showed higher (p < 0.05) sEMG levels in BFProx and BFMed compared with the Uni + Hor variant. In addition, Uni + Ver registered the largest GM and ST sEMG values. In conclusion, the vertical variants of the flywheel deadlift exercise led to higher muscle force production and sEMG compared with their horizontal counterparts. Both Bi + Ver and Uni + Ver may be effective in promoting an increase in hamstring muscles activity and muscle force at long muscle length, while the Uni + Ver variant may be more effective in promoting GM and ST involvement.

Eccentric force and electromyogram comparison between the eccentric phase of the Nordic hamstring exercise and the razor hamstring curl

PURPOSE

Nordic hamstring exercise (NHE) and razor hamstring curl (RHC) are usually performed to train hamstring eccentric contraction strength. However, it is unclear whether there are differences in the intensity of the two methods and the amount of loading on each muscle. Therefore, this study was conducted using peak eccentric force and each muscle surface electromyogram (s-EMG) to provide useful information to decide whether NHE or RHC should be prescribed for training and rehabilitation.

METHODS

s-EMG electrodes were placed in the medial gastrocnemius, lateral gastrocnemius, biceps femoris, semitendinosus, gluteus maximus, and erector spinae of the dominant leg of the fifteen healthy male university students with exercise habits. Maximum voluntary isometric contractions of 3 seconds were performed on each muscle followed by NHE and RHC in random order. The outcome variables included peak eccentric force and s-EMG of each muscle calculated by means amplitude during the NHE and RHC.

RESULTS

Peak eccentric force was significantly higher in RHC than in NHE (p = 0.001, r = 0.73). However, NHE was significantly higher in s-EMG of semitendinosus (p = 0.04, r = -0.52) than RHC. However, there were no significant differences in EMG of the medial gastrocnemius (p = 0.202, r = -0.34), lateral gastrocnemius (p = 0.496, r = 0.18), biceps femoris (p = 0.061, r = -0.48), gluteus maximus (p = 0.112, r = -0.41), erector spinae (p = 0.45, r = 0.20) between NHE and RHC.

CONCLUSIONS

For NHE and RHC, the peak eccentric force exerted during the exercise was significantly higher for RHC, and the s-EMG of semitendinosus was significantly higher for NHE.

How mechanics of individual muscle-tendon units define knee and ankle joint function in health and cerebral palsy-a narrative review

This study reviews the relationship between muscle-tendon biomechanics and joint function, with a particular focus on how cerebral palsy (CP) affects this relationship. In healthy individuals, muscle size is a critical determinant of strength, with muscle volume, cross-sectional area, and moment arm correlating with knee and ankle joint torque for different isometric/isokinetic contractions. However, in CP, impaired muscle growth contributes to joint pathophysiology even though only a limited number of studies have investigated the impact of deficits in muscle size on pathological joint function. As muscles are the primary factors determining joint torque, in this review two main approaches used for muscle force quantification are discussed. The direct quantification of individual muscle forces from their relevant tendons through intraoperative approaches holds a high potential for characterizing healthy and diseased muscles but poses challenges due to the invasive nature of the technique. On the other hand, musculoskeletal models, using an inverse dynamic approach, can predict muscle forces, but rely on several assumptions and have inherent limitations. Neither technique has become established in routine clinical practice. Nevertheless, identifying the relative contribution of each muscle to the overall joint moment would be key for diagnosis and formulating efficient treatment strategies for patients with CP. This review emphasizes the necessity of implementing the intraoperative approach into general surgical practice, particularly for joint correction operations in diverse patient groups. Obtaining in vivo data directly would enhance musculoskeletal models, providing more accurate force estimations. This integrated approach can improve the clinicians' decision-making process and advance treatment strategies by predicting changes at the muscle and joint levels before interventions, thus, holding the potential to significantly enhance clinical outcomes.

A Conceptual Exploration of Hamstring Muscle-Tendon Functioning during the Late-Swing Phase of Sprinting: The Importance of Evidence-Based Hamstring Training Frameworks

An eccentrically lengthening, energy-absorbing, brake-driven model of hamstring function during the late-swing phase of sprinting has been widely touted within the existing literature. In contrast, an isometrically contracting, spring-driven model of hamstring function has recently been proposed. This theory has gained substantial traction within the applied sporting world, influencing understandings of hamstring function while sprinting, as well as the development and adoption of certain types of hamstring-specific exercises. Across the animal kingdom, both spring- and motor-driven muscle-tendon unit (MTU) functioning are frequently observed, with both models of locomotive functioning commonly utilising some degree of active muscle lengthening to draw upon force enhancement mechanisms. However, a method to accurately assess hamstring muscle-tendon functioning when sprinting does not exist. Accordingly, the aims of this review article are three-fold: (1) to comprehensively explore current terminology, theories and models surrounding muscle-tendon functioning during locomotion, (2) to relate these models to potential hamstring function when sprinting by examining a variety of hamstring-specific research and (3) to highlight the importance of developing and utilising evidence-based frameworks to guide hamstring training in athletes required to sprint. Due to the intensity of movement, large musculotendinous stretches and high mechanical loads experienced in the hamstrings when sprinting, it is anticipated that the hamstring MTUs adopt a model of functioning that has some reliance upon active muscle lengthening and muscle actuators during this particular task. However, each individual hamstring MTU is expected to adopt various combinations of spring-, brake- and motor-driven functioning when sprinting, in accordance with their architectural arrangement and activation patterns. Muscle function is intricate and dependent upon complex interactions between musculoskeletal kinematics and kinetics, muscle activation patterns and the neuromechanical regulation of tensions and stiffness, and loads applied by the environment, among other important variables. Accordingly, hamstring function when sprinting is anticipated to be unique to this particular activity. It is therefore proposed that the adoption of hamstring-specific exercises should not be founded on unvalidated claims of replicating hamstring function when sprinting, as has been suggested in the literature. Adaptive benefits may potentially be derived from a range of hamstring-specific exercises that vary in the stimuli they provide. Therefore, a more rigorous approach is to select hamstring-specific exercises based on thoroughly constructed evidence-based frameworks surrounding the specific stimulus provided by the exercise, the accompanying adaptations elicited by the exercise, and the effects of these adaptations on hamstring functioning and injury risk mitigation when sprinting.

Biceps Femoris Fascicle Behavior during Submaximal and Maximal Slow Speed Contractions

PURPOSE

The present study compared the effects of contraction intensity (submaximal vs maximal) and mode (concentric vs eccentric) on biceps femoris long head (BFlh) fascicle lengthening, rotation, and architectural gear ratio at long and short muscle lengths.

METHODS

Data were captured from 18 healthy adults (10 men and 8 women) without history of right hamstring strain injury. BFlh fascicle length ( Lf ), fascicle angle (FA), and muscle thickness (MT) were assessed in real time using two serially aligned ultrasound devices while submaximal and maximal concentric and eccentric isokinetic knee flexions were performed at 30°·s -1 . Ultrasound videos were exported and edited to create a single, synchronized video, and three fascicles were analyzed through the range of motion (10° to 80°). Changes (Δ) in Lf , FA, MT, and muscle gear at long (60° to 80° knee angle; 0° = full knee extension) and short (10° to 30°) muscle lengths and across the full knee flexion range were measured and compared.

RESULTS

Greater Δ Lf was observed at long muscle length ( P < 0.001) during both submaximal and maximal eccentric and concentric contractions. When the full length range was analyzed, a slightly greater ΔMT was observed in concentric contractions ( P = 0.03). No significant differences between submaximal and maximal contractions were observed for Δ Lf , ΔFA, or ΔMT. No changes were detected in the calculated muscle gear between muscle lengths, intensities, or conditions ( P > 0.05).

CONCLUSIONS

Although gear ratio ranged ~1.0 to 1.1 under most conditions, the increased fascicle lengthening observed at long muscle lengths might influence acute myofiber damage risk but also speculatively play a role in chronic hypertrophic responses to training.