Bioprospecting thermophilic glycosyl hydrolases, from hot springs of Himachal Pradesh, for biomass valorization

Cellulolytic potential of mangrove bacteria Bacillus haynesii DS7010 and the effect of anthropogenic and environmental stressors on bacterial survivability and cellulose metabolism

Cellulose degrading bacterial diversity of Bhitarkanika mangrove ecosystem, India, was uncovered and the cellulose degradation mechanism in Bacillus haynesii DS7010 under the modifiers such as pH (pCO2), salinity and lead (Pb) was elucidated in the present study. The abundance of cellulose degrading heterotrophic bacteria was found to be higher in mangrove sediment than in water. The most potential strain, B. haynesii DS7010 showed the presence of endoglucanase, exoglucanase and β-glucosidase with the maximum degradation recorded at 48 h of incubation, with 1% substrate concentration at 41 °C incubation temperature. Two glycoside hydrolase genes, celA and celB were confirmed in this bacterium. 3D structure prediction of the translated CelA and CelB proteins showed maximum similarities with glycoside hydrolase 48 (GH48) and glycoside hydrolase 5 (GH5) respectively. Native PAGE followed by zymogram assay unveiled the presence of eight isoforms of cellulase ranged from 78 kDa to 245 kDa. Among the stressors, most adverse effect was observed under Pb stress at 1400 ppm concentration, followed by pH at pH 4. This was indicated by prolonged lag phase growth, higher reactive oxygen species (ROS) production, lower enzyme activity and downregulation of celA and celB gene expressions. Salinity augmented bacterial metabolism up to 3% NaCl concentration. Mangrove leaf litter degradation by B. haynesii DS7010 indicated a substantial reduction in cellulolytic potential of the bacterium in response to the synergistic effect of the stressors. Microcosm set up with the stressors exhibited 0.97% decrease in total carbon (C%) and 0.02% increase in total nitrogen (N%) after 35 d of degradation while under natural conditions, the reduction in C and the increase in N were 4.05% and 0.2%, respectively. The findings of the study suggest the cellulose degradation mechanism of a mangrove bacterium and its resilience to the future consequences of environmental pollution and climate change.

Isolation and Characterization of Thermophilic Bacteria from a Hot Spring in the State of Hidalgo, Mexico, and Geochemical Analysis of the Thermal Water

Hot springs worldwide can be a source of extremophilic microorganisms of biotechnological interest. In this study, samplings of a hot spring in Hidalgo, Mexico, were conducted to isolate, identify, and characterize morphologically, biochemically, and molecularly those bacterial strains with potential industrial applications. In addition, a physicochemical and geochemical examination of the hot spring was conducted to fully understand the study region and its potential connection to the strains discovered. The hot spring was classified as sulfate-calcic according to the Piper Diagram; the hydrogeochemical analysis showed the possible interactions between minerals and water. Eighteen bacterial strains were isolated with optimal growth temperatures from 50 to 55 °C. All strains are Gram-positive, the majority having a rod shape, and one a round shape, and 17 produce endospores. Hydrolysis tests on cellulose, pectin, and xylan agar plates demonstrated enzymatic activity in some of the strains. Molecular identification through the 16S rDNA gene allowed classification of 17 strains within the Phylum Firmicutes and one within Deinococcus-Thermus. The bacterial strains were associated with the genera Anoxybacillus, Bacillus, Anerunibacillus, Paenibacillus, and Deinococcus, indicating a diversity of bacterial strains with potential industrial applications.

Transforming Lignin Biomass to Value: Interplay Between Ligninolytic Enzymes and Lignocellulose Depolymerization

Lignin is the main constituent of lignocellulosic biomasses, which have a significant untapped ability to replace ecologically unfavorable and non-renewable fossil fuels. The lignin is broken down by ligninolytic bacteria, which also use a peripheral pathway to transform heterogeneous lignin derivatives into central intermediates like protocatechuate or catechol. By undergoing ring cleavage through the -ketoadipate pathway, these intermediates become metabolites by producing acetyl-CoA for internal product biosynthesis, including the creation of triacylglycerols and polyhydroxyalkanoates. Expanding our understanding of ligninolytic microbial communities, strains, and enzymes through bioprospecting can help us better understand the metabolism of aromatics. The most viable idea for sustainable development is the valorization of lignin into biopolymers as well as other high-value goods. This process is now being used to generate a variety of biopolymers, including polyesters, epoxies, phenol resins, poly (lactic acids), poly hydroxyl alkanoates, and polyurethanes. Furthermore, lignin recalcitrance remained a possible barrier to efficient lignin valorization, prompting several efforts to design high-efficiency bioprocesses to produce specific polymer types as well as other important bioproducts.

Graphical Abstract

Optimization and biochemical characterization of a thermotolerant processive cellulase, PtCel1, of Parageobacillus thermoglucosidasius NBCB1

Vermicomposting involves enrichment of microorganisms that are able to resist higher temperatures and perform simultaneous degradation of lignocellulose, and therefore, such microbial communities are a potential source of cellulolytic enzymes. This study aimed to optimize the production of a processive cellulase by Parageobacillus thermoglucosidasius NBCB1 isolated from vermicompost, under submerged fermentation of rice straw and to characterize the purified enzyme for industrial suitability. Cellulase production in basal medium (7.27 IU/mg) was enhanced to 61 IU/mg by One Factor At a Time approach, which was further improved to 78.46 IU/mg by genetic algorithm based artificial neural networking. The cellulase PtCel1 purified from bacterial culture showed a molecular weight of ≈33 kD, had activity on both crystalline (305 IU/mg) and amorphous (184 IU/mg) cellulose as substrates. It had pH and temperature optima of 5.5°C and 60°C, respectively, and retained 100% activity upon preincubation at 60°C for 1 h indicating thermostability. PtCel1 was tolerant to sodium dodecyl sulfate, glucose and mannose; and the various metal chlorides, such as sodium, magnesium, calcium and zinc, acted as inducers giving 77.54%, 45.15%, 61.10%, and 169.14% augmentation of activity, respectively. Its efficiency on cellulosic substrates and robustness against aforementioned chemical and thermal environment makes it suitable for industrial applications.

Glycosyl hydrolase 11 (xynA) gene with xylanase activity from thermophilic bacteria isolated from thermal springs

Background

Hemicellulose is one of the copious polymer in lignocellulosic biomass (LCB). It is primarily composed of xylan linked by β-1,4 glycosidic bonds. Xylanase preferentially cleaves the β-1,4-glycosidic bonds in the xylan backbone resulting in complete hydrolysis of the biomass. Thermostable variants of glycoside hydrolases act as robust catalysts, not only in degradation but also during processing, to obtain specific carbohydrate-containing chemicals and materials (Ramasamy et al. in Madras Agric J 107(special):1. 10.29321/MAJ.2020.000382, 2020).

Results

The xylanase production by two thermophilic bacteria isolated from thermal springs was evaluated. In addition, the gene encoding this industrially vital enzyme was isolated and characterized, and its protein structure was analyzed. The thermophilic bacteria producing xylanases were isolated from augmented sawdust and banana fiber biomass from hot springs of Himachal Pradesh and identified as Bacillus subtilis VSDB5 and Bacillus licheniformis KBFB4 using 16S rRNA gene sequencing. The persistent xylanase activity revealed that the enzyme is secreted extracellularly with the maximum activity of 0.76 IU mL−1 and 1.0 IU mL−1 at 6 h and 12 h of growth by KBFB4 and VSDB5, respectively, under submerged fermentation. Both the strains exhibited the maximum activity at pH 6 and a temperature of 50 °C. The xylanases of KBFB4 and VSDB5 were thermostable and retained 40% of their activity at 60 °C after incubation for 30 min. Xylanase of VSDB5 had wide thermotolerance and retained 20% of its activity from 60 to 80 °C, whereas xylanase of KBFB4 showed wide alkali tolerance and retained 80% of its activity until pH 10. The xylanase (xynA)-encoding gene (650 bp) cloned from both the strains using specific primers showed 98 to 99% homology to β-1,4-endoxylanase gene. Further in silico analysis predicted that the xylanase protein, with a molecular weight of 23 kDa, had a high pI (9.44–9.65), which explained the alkaline nature of the enzyme and greater aliphatic index (56.29). This finding suggested that the protein is thermostable. Multiple sequence alignment and homology modeling of the protein sequence revealed that the gene product belonged to the GH11 family, indicating its possible application in bioconversion.

Conclusion

The strains B. subtilis VSDB5 and B. licheniformis KBFB4 obtained from hot springs of Himachal Pradesh produced potent and alkali-tolerant thermostable xylanases, which belong to the GH11 family. The enzyme can be supplemented in industrial applications for biomass conversion at high temperatures and pH (or in processes involving alkali treatment).

Graphical Abstract

A selected bacterial strain for the self-healing process in cementitious specimens without cell immobilization steps

The use of microorganisms capable of mediating the bioprecipitation process can be an important application in the self-healing processes of cement specimens. Thus, the present study identified and evaluated five Bacillus strains for potential application in the protocol of self-healing via bioprecipitation. Cell growth, enzyme production, and kinetic parameters conditions were evaluated during the fermentation process. Based on the analysis of 16S rDNA in conjunction with biochemical testing, results demonstrate that the strains are either Bacillus cereus or Bacillus thuringiensis. Strategically it was found that the addition of glycerol to fermentative medium was essential to increase the bacterial concentration (≈ 4.2 × 10⁷ cells mL^-1) and production of the enzyme urease (≈ 3.623,2 U.mL^-1). The addition of this medium after 40 days of fermentation promoted the self-healing of cracks and increased compressive strength in ≈ 14.2% of the cementitious specimens; therefore, increasing the sustainability and engineering properties of cement-based materials.

Thermotolerant glycosyl hydrolases-producing Bacillus aerius CMCPS1 and its saccharification efficiency on HCR-laccase (LccH)-pretreated corncob biomass

BACKGROUND

The current production of bioethanol based on lignocellulosic biomass (LCB) highly depends on thermostable enzymes and extremophiles owing to less risk of contamination. Thermophilic bacterial cellulases are preferred over fungi due to their higher growth rate, presence of complex multi-enzymes, stability, and enhanced bioconversion efficiency. Corncob, underutilized biomass, ensures energy conservation due to high lignocellulosic and more fermentable sugar content. In the present study, the thermophilic bacterium Bacillus aerius CMCPS1, isolated from the thermal springs of Manikaran, Himachal Pradesh, India, was characterized in terms of its activity, stability, and hydrolytic capacity. A two-step process comprising: (i) a combined strategy of hydrodynamic cavitation reaction (HCR)-coupled enzymatic (LccH at 6.5 U) pretreatment for delignification and (ii) subsequent hydrolysis of pre-treated (HCR-LccH) corncob biomass (CCB) using a thermostable cocktail of CMCPS1 was adopted to validate the efficiency of the process. Some of the parameters studied include lignin reduction, cellulose increase, and saccharification efficiency.

RESULT

Among the five isolates obtained by in situ enrichment on various substrates, B. aerius CMCPS1, isolated from hot springs, exhibited the maximum hydrolytic activity of 4.11. The GH activity of the CMCPS1 strain under submerged fermentation revealed maximum filter paper activity (FPA) and endoglucanase activity of 4.36 IU mL-1 and 2.98 IU mL-1, respectively, at 44 h. Similarly, the isolate produced exoglucanase and β-glucosidase with an activity of 1.76 IU mL-1 and 1.23 IU mL-1 at 48 h, respectively. More specifically, the enzyme endo-1,4-β-d glucanase E.C.3.2.1.4 (CMCase) produced by B. aerius CMCPS1 displayed wider stability to pH (3-9) and temperature (30-90 °C) than most fungal cellulases. Similarly, the activity of CMCase increased in the presence of organic solvents (118% at 30% acetone v/v). The partially purified CMCase from the culture supernatant of CMCPS1 registered 64% yield with twofold purification. The zymogram and SDS-PAGE analyses further confirmed the CMCase activity with an apparent molecular mass of 70 kDa. The presence of genes specific to cellulases, such as cellulose-binding domain CelB, confirmed the presence of GH family 46 and β-glucosidase activity (GH3). The multifunctional cellulases of CMCPS1 were evaluated for their saccharification efficiency on laccase (LccH, a fungal laccase from Hexagonia hirta MSF2)-pretreated corncob in a HCR. The lignin and hemicelluloses removal efficiency of HCR-LccH was 54.1 and 6.57%, respectively, with an increase in cellulose fraction (42.25%). The saccharification efficiency of 55% was achieved with CMCPS1 multifunctional cellulases at 50 °C and pH 5.0.

CONCLUSION

The multifunctional cellulase complex of B. aerius CMCPS1 is a potential biocatalyst for application in lignocellulosic biomass-based biorefineries. The saccharification ability of HCR-LccH-pretreated corncob at elevated temperatures would be an advantage for biofuel production from lignocellulosic biomass.