Utilizing In Vitro Dissolution-Permeation Chamber for the Quantitative Prediction of pH-Dependent Drug-Drug Interactions with Acid-Reducing Agents: a Comparison with Physiologically Based Pharmacokinetic Modeling

Enhanced biopharmaceutical performance of brick dust molecule nilotinib via stabilized amorphous nanosuspension using a facile acid-base neutralization approach

"Brick dust" compounds have high lattice energy as manifested by the poor aqueous solubility and suboptimal bioavailability. Nilotinib being a weakly basic brick dust molecule exhibits erratic and limited absorption during gastrointestinal transit, attributed to pre-absorptive factors like pH-dependent solubility, poor dissolution kinetics, and post-absorptive factors including P-gp-mediated drug efflux. In our study, these problems are addressed holistically by the successful fabrication of amorphous nanosuspension by an acid-base neutralization approach. The nanosuspension was obtained via rapid precipitation of nilotinib in an amorphous form and the generated in situ sodium chloride salt assisted in stabilizing the drug-loaded nanosuspension in a cage of salt and micellar stabilizer. Soluplus® and hypromellose acetate succinate (HPMCAS) were employed as a novel combination of stabilizers. Systematic optimization was carried out by employing the I-optimal method using Design Expert® software with a concentration of HPMCAS and Soluplus® as independent variables and evaluating them for responses viz particle size, polydispersity index (PDI), and zeta potential. The resultant nanosuspension showed a mean particle size of 130.5 ± 1.22 nm with a PDI value of 0.27 ± 0.01, and a zeta potential of - 5.21 ± 0.91 mV. The nanosuspension was further characterized for morphology, dissolution, and in vivo pharmacokinetics study. X-ray powder diffraction study of the nano-formulation displayed a halo pattern revealing the amorphous form. Stability studies showed that the nanosuspension remained stable at 40 °C ± 2 °C and 75% RH ± 5% RH for a period of three months. In vitro drug release and solubility study showed threefold and 36-fold enhancement in dissolution and solubility of the nanosuspension. Furthermore, an in vivo pharmacokinetic study in Sprague-Dawley rats following oral administration displayed a 1.46-fold enhancement in the relative bioavailability of the nanosuspension in contrast to neat nilotinib.

Advances in Oral Drug Delivery Systems: Challenges and Opportunities

The oral route is the most preferred route for systemic and local drug delivery. However, the oral drug delivery system faces the harsh physiological and physicochemical environment of the gastrointestinal tract, which limits the bioavailability and targeted design of oral drug delivery system. Innovative pharmaceutical approaches including nanoparticulate formulations, biomimetic drug formulations, and microfabricated devices have been explored to optimize drug targeting and bioavailability. In this review, the anatomical factors, biochemical factors, and physiology factors that influence delivering drug via oral route are discussed and recent advance in conventional and novel oral drug delivery approaches for improving drug bioavailability and targeting ability are highlighted. We also address the challenges and opportunities of oral drug delivery systems in future.

Biopredictive capability assessment of two dissolution/permeation assays, µFLUX™ and PermeaLoop™, using supersaturating formulations of Posaconazole

The majority of new drug entities exhibits poor water solubility and therefore enabling formulations are often needed to ensure sufficient in vivo bioavailability upon oral administration. Several in vitro tools have been proposed for biopredictive screening of such drug formulations to facilitate formulation development. Among these, combined dissolution/permeation (D/P) assays have gained increasing interest in recent years, since they are presumed to better predict the absorption behavior as compared to single-compartment dissolution assays. Moreover, especially for supersaturating formulations, it has been demonstrated that the presence of an absorption sink better mimics the intraluminal supersaturation performance. The present study aimed to investigate the biopredictive abilities of two in vitro D/P setups to predict intestinal supersaturation and systemic absorption of supersaturable systems. Experiments were performed with a µFLUX™ and PermeaLoop™ apparatus, respectively, which differ primarily in their volume-to-area ratios between donor compartment and membrane as well as in the type of biomimetic barrier. A two-stage dissolution protocol was adopted to mimic the transit from acidic stomach to more neutral intestinal fluids using biomimetic media. Three formulations of the weakly basic compound Posaconazole (PCZ), namely an acidified and a neutral suspension and an amorphous solid dispersion (ASD) tablet, were tested. Under the present conditions, and for the specific set of formulations studied here, PermeaLoop™ showed a better biopredictive ability for intestinal supersaturation and systemic absorption for the three formulations than the µFLUX™ D/P setup. Interestingly, minor modifications of the two-stage D/P protocol in terms of medium transfer rates from simulated gastric fluid (SGF) to fasted state simulated intestinal fluid (FaSSIF) had a substantial impact particularly on the permeation of the crystalline PCZ suspension ("acidified suspension"). The ASD tablet was less sensitive to gradual medium changes than the crystalline PCZ suspensions. The current study confirms the usefulness of D/P assays for formulation ranking of weakly basic compounds and supersaturating formulations.

Non-Effective Improvement of Absorption for Some Nanoparticle Formulations Explained by Permeability under Non-Sink Conditions

We evaluated the in vitro permeability of nanoparticle formulations of high and low lipophilic compounds under non-sink conditions, wherein compounds are not completely dissolved. The permeability of the highly lipophilic compound, griseofulvin, was improved by about 30% due to nanonization under non-sink conditions. Moreover, this permeability was about 50% higher than that under sink conditions. On the other hand, for the low lipophilic compound, hydrocortisone, there was no difference in permeability between micro-and nano-sized compounds under non-sink conditions. The nanonization of highly lipophilic compounds improves the permeability of the unstirred water layer (UWL), which in turn improves overall permeability. On the other hand, because the rate-limiting step in permeation for the low lipophilic compounds is the diffusion of the compounds in the membrane, the improvement of UWL permeability by nanonization does not improve the overall permeability. Based on this mechanism, nanoparticle formulations are not effective for low lipophilic compounds. To accurately predict the absorption of nanoparticle formulations, it is necessary to consider their permeability under non-sink conditions which reflect in vivo conditions.

Best practices in current models mimicking drug permeability in the gastrointestinal tract - an UNGAP review

The absorption of orally administered drug products is a complex, dynamic process, dependent on a range of biopharmaceutical properties; notably the aqueous solubility of a molecule, stability within the gastrointestinal tract (GIT) and permeability. From a regulatory perspective, the concept of high intestinal permeability is intrinsically linked to the fraction of the oral dose absorbed. The relationship between permeability and the extent of absorption means that experimental models of permeability have regularly been used as a surrogate measure to estimate the fraction absorbed. Accurate assessment of a molecule's intestinal permeability is of critical importance during the pharmaceutical development process of oral drug products, and the current review provides a critique of in vivo, in vitro and ex vivo approaches. The usefulness of in silico models to predict drug permeability is also discussed and an overview of solvent systems used in permeability assessments is provided. Studies of drug absorption in humans are an indirect indicator of intestinal permeability, but in vitro and ex vivo tools provide initial screening approaches are important tools for direct assessment of permeability in drug development. Continued refinement of the accuracy of in silico approaches and their validation with human in vivo data will facilitate more efficient characterisation of permeability earlier in the drug development process and will provide useful inputs for integrated, end-to-end absorption modelling.

pH-Dependent Molecular Gate Mesoporous Microparticles for Biological Control of Giardia intestinalis

Giardiasis is a parasitism produced by the protozoa Giardia intestinalis that lives as trophozoite in the small intestine (mainly in the duodenum) attached to the intestinal villus by means of billed discs. The first line treatment is metronidazole, a drug with high bioavailability, which is why to obtain therapeutic concentrations in duodenum, it is necessary to administer high doses of drug to patients with the consequent occurrence of side effects. It is necessary to developed new therapeutical approaches to achieve a local delivery of the drug. In this sense, we have developed gated mesoporous silica microparticles loaded with metronidazole and with a molecular gate pH dependent. In vitro assays demonstrated that the metronidazole release is practically insignificant at acidic pHs, but in duodenum conditions, the metronidazole delivery from the microparticles is effective enough to produce an important parasite destruction. In vivo assays indicate that this microparticulate system allows to increase the concentration of the drug in duodenum and reduce the concentration in plasma avoiding systemic effects. This system could be useful for other intestinal local treatments in order to reduce doses and increase drug availability in target tissues.

New Insights of Oral Colonic Drug Delivery Systems for Inflammatory Bowel Disease Therapy

Colonic Drug Delivery Systems (CDDS) are especially advantageous for local treatment of inflammatory bowel diseases (IBD). Site-targeted drug release allows to obtain a high drug concentration in injured tissues and less systemic adverse effects, as consequence of less/null drug absorption in small intestine. This review focused on the reported contributions in the last four years to improve the effectiveness of treatments of inflammatory bowel diseases. The work concludes that there has been an increase in the development of CDDS in which pH, specific enzymes, reactive oxygen species (ROS), or a combination of all of these triggers the release. These delivery systems demonstrated a therapeutic improvement with fewer adverse effects. Future perspectives to the treatment of this disease include the elucidation of molecular basis of IBD diseases in order to design more specific treatments, and the performance of more in vivo assays to validate the specificity and stability of the obtained systems.

On the Usefulness of Two Small-Scale In Vitro Setups in the Evaluation of Luminal Precipitation of Lipophilic Weak Bases in Early Formulation Development

A small-scale biphasic dissolution setup and a small-scale dissolution-permeation (D-P) setup were evaluated for their usefulness in simulating the luminal precipitation of three lipophilic weak bases—dipyridamole, ketoconazole and itraconazole. The transition from the gastric to intestinal environment was incorporated into both experimental procedures. Emulsification during the biphasic dissolution experiments had a minimal impact on the data, when appropriate risk mitigation steps were incorporated. Precipitation parameters estimated from the in vitro data were inputted into the Simcyp^® physiologically based pharmacokinetic (PBPK) modelling software and simulated human plasma profiles were compared with previously published pharmacokinetic data. Average C_max and AUC values estimated using experimentally derived precipitation parameters from the biphasic experiments deviated from corresponding published actual values less than values estimated using the default simulator parameters for precipitation. The slow rate of transport through the biomimetic membrane in the D-P setup limited its usefulness in forecasting the rates of in vivo precipitation used in the modelling of average plasma profiles.

Using pH Gradient Dissolution with In-Situ Flux Measurement to Evaluate Bioavailability and DDI for Formulated Poorly Soluble Drug Products

This study described a pH-gradient dissolution method combined with flux measurements as an in vitro tool for assessing the risk of bioavailability reduction due to drug-drug interactions (DDI) caused by acid reducing agents (ARAs). The device incorporates absorption chambers into USP II dissolution vessels, with fiber optic UV-probes monitoring concentration in situ. Dosage forms of Genentech BCS class II drugs, GDC-0810, GDC-0941, and compound A, were tested by starting the dissolution in either pH 1.6 or pH 4.0 media then converting to FaSSIF after 30 min. GDC-0810 showed no significant difference in flux between the two conversion experiments. A supersaturation phase was observed for GDC-0941 in the pH 1.6 experiments after media conversion to FaSSIF; however, it did not appear to occur in the pH 4.0 experiment due to low drug solubility at pH 4.0, resulting in a 95% decrease in flux compared to pH 1.6 experiment. The extent of flux reduction and the total accumulated API mass in the absorption chamber agreed well with the 89% reduction in mean Cmax and the 82% reduction in mean AUC from dog PK study between animals treated with pentagastrin and famotidine. Testing of the compound A optimized formulation tablets showed a 25% reduction in flux and in vitro absorbed amount by changing pH 1.6 to 4.0, correlating well with the AUC decrease in clinical studies. Good correlation between in vitro data and in vivo PK data demonstrated the applicability of the method for formulators to develop drug products mitigating DDI from ARAs.

Automated assays for thermodynamic (equilibrium) solubility determination

Solubility is a crucial physicochemical property for drug candidates and is important in both drug discovery and development. Poor solubility is detrimental to absorption after oral administration and can mask compound activity in bioassays in various ways. Hence, solubility liabilities should ideally be identified as early as possible in the drug development process. With the increasing number of compounds as potential drug candidates, automated thermodynamic solubility assays for high throughput screening enabling rapid evaluation of a large number of compounds are becoming increasingly important. This review discusses the current status of the most widely used automated assays for thermodynamic solubility, followed by recent high throughput measurements of properties related to solubility (e.g. dissolution rate and supersaturation) and a brief overview of predictive computational methods for thermodynamic solubility reported in the literature.

In vitro methods to assess drug precipitation in the fasted small intestine – a PEARRL review

Objectives

Drug precipitation in vivo poses a significant challenge for the pharmaceutical industry. During the drug development process, the impact of drug supersaturation or precipitation on the in vivo behaviour of drug products is evaluated with in vitro techniques. This review focuses on the small and full scale in vitro methods to assess drug precipitation in the fasted small intestine.

Key findings

Many methods have been developed in an attempt to evaluate drug precipitation in the fasted state, with varying degrees of complexity and scale. In early stages of drug development, when drug quantities are typically limited, small-scale tests facilitate an early evaluation of the potential precipitation risk in vivo and allow rapid screening of prototype formulations. At later stages of formulation development, full-scale methods are necessary to predict the behaviour of formulations at clinically relevant doses. Multicompartment models allow the evaluation of drug precipitation after transfer from stomach to the upper small intestine. Optimisation of available biopharmaceutics tools for evaluating precipitation in the fasted small intestine is crucial for accelerating the development of novel breakthrough medicines and reducing the development costs.

Summary

Despite the progress from compendial quality control dissolution methods, further work is required to validate the usefulness of proposed setups and to increase their biorelevance, particularly in simulating the absorption of drug along the intestinal lumen. Coupling results from in vitro testing with physiologically based pharmacokinetic modelling holds significant promise and requires further evaluation.

Ribociclib Bioavailability Is Not Affected by Gastric pH Changes or Food Intake: In Silico and Clinical Evaluations

Ribociclib (KISQALI), a cyclin‐dependent kinase 4/6 inhibitor approved for the first‐line treatment of HR+/HER2– advanced breast cancer with an aromatase inhibitor, is administered with no restrictions on concomitant gastric pH‐elevating agents or food intake. The influence of proton pump inhibitors (PPIs) on ribociclib bioavailability was assessed using 1) biorelevant media solubility, 2) physiologically based pharmacokinetic (PBPK) modeling, 3) noncompartmental analysis (NCA) of clinical trial data, and 4) population PK (PopPK) analysis. This multipronged approach indicated no effect of gastric pH changes on ribociclib PK and served as a platform for supporting ribociclib labeling language, stating no impact of gastric pH‐altering agents on the absorption of ribociclib, without a dedicated drug–drug interaction trial. The bioequivalence of ribociclib exposure with or without a high‐fat meal was demonstrated in a clinical trial. Lack of restrictions on ribociclib dosing may facilitate better patient compliance and therefore clinical benefit.

Impact of Drug-Rich Colloids of Itraconazole and HPMCAS on Membrane Flux in Vitro and Oral Bioavailability in Rats

Improving the oral absorption of compounds with low aqueous solubility is a common challenge that often requires an enabling technology. Frequently, oral absorption can be improved by formulating the compound as an amorphous solid dispersion (ASD). Upon dissolution, an ASD can reach a higher concentration of unbound drug than the crystalline form, and often generates a large number of sub-micrometer, rapidly dissolving drug-rich colloids. These drug-rich colloids have the potential to decrease the diffusional resistance across the unstirred water layer of the intestinal tract (UWL) by acting as rapidly diffusing shuttles for unbound drug. In a prior study utilizing a membrane flux assay, we demonstrated that, for itraconazole, increasing the concentration of drug-rich colloids increased membrane flux in vitro. In this study, we evaluate spray-dried amorphous solid dispersions (SDDs) of itraconazole with hydroxypropyl methylcellulose acetate succinate (HPMCAS) to study the impact of varying concentrations of drug-rich colloids on the oral absorption of itraconazole in rats, and to quantify their impact on in vitro flux as a function of bile salt concentration. When Sporanox and itraconazole/AFFINISOL High Productivity HPMCAS SDDs were dosed in rats, the maximum absorption rate for each formulation rank-ordered with membrane flux in vitro. The relative maximum absorption rate in vivo correlated well with the in vitro flux measured in 2% SIF (26.8 mM bile acid concentration), a representative bile acid concentration for rats. In vitro it was found that as the bile salt concentration increases, the importance of colloids for improving UWL permeability is diminished. We demonstrate that drug-containing micelles and colloids both contribute to aqueous boundary layer diffusion in proportion to their diffusion coefficient and drug loading. These data suggest that, for compounds with very low aqueous solubility and high epithelial permeability, designing amorphous formulations that produce colloids on dissolution may be a viable approach to improve oral bioavailability.