Statistical approach for assessing the influence of calcium silicate and HPMC on the formulation of novel alfuzosin hydrochloride mucoadhesive-floating beads as gastroretentive drug delivery systems

Intranasal Ion-Triggered In Situ Delivery System of Virus-like Particles: Development Using the Quality by Design Approach

The rapid growth in the prevalence of infectious diseases requires timely action from drug developers. In recent years, the COVID-19 pandemic has demonstrated the unpreparedness of the population for such emergencies. The introduction of modern methods of Design of Experiments (DoE) is required to accelerate the process of drug development and bring a drug to market. The main objective of this study was to develop an ion-triggered in situ system for intranasal delivery of VLP using a Quality by Design approach. Based on a literature review and initial studies, the key QTPP, CQA, CPP, and CMA were identified to develop a novel delivery system for virus-like particles. As a result of the studies on the quality attributes of the developed delivery system, an ion-triggered in situ gel meeting all the specified parameters was obtained using the Quality by Design method.

Recent developments in natural biopolymer based drug delivery systems

Targeted delivery of drug molecules to diseased sites is a great challenge in pharmaceutical and biomedical sciences. Fabrication of drug delivery systems (DDS) to target and/or diagnose sick cells is an effective means to achieve good therapeutic results along with a minimal toxicological impact on healthy cells. Biopolymers are becoming an important class of materials owing to their biodegradability, good compatibility, non-toxicity, non-immunogenicity, and long blood circulation time and high drug loading ratio for both macros as well as micro-sized drug molecules. This review summarizes the recent trends in biopolymer-based DDS, forecasting their broad future clinical applications. Cellulose chitosan, starch, silk fibroins, collagen, albumin, gelatin, alginate, agar, proteins and peptides have shown potential applications in DDS. A range of synthetic techniques have been reported to design the DDS and are discussed in the current study which is being successfully employed in ocular, dental, transdermal and intranasal delivery systems. Different formulations of DDS are also overviewed in this review article along with synthesis techniques employed for designing the DDS. The possibility of these biopolymer applications points to a new route for creating unique DDS with enhanced therapeutic qualities for scaling up creative formulations up to the clinical level.

Formulation, optimization, and in-vitro-ex-vivo evaluation of dual-crosslinked zinc pectinate-neem gum-interpenetrating polymer network mediated lansoprazole loaded floating microbeads

Low methoxy pectin (LM pectin) suffers from burst release owing to its high swellability and solubility in water. Consequently, in ways to design an ideal drug delivery system, these obstacles must be surmounted. Therefore, the work aimed to design dual crosslinked LM pectin -neem gum (NG) mediated interpenetrating polymer network (IPN) floating mucoadhesive microbeads for lansoprazole (LNZ) gastro-retentive delivery. In short, LNZ-loaded floating microbeads were achieved by using the ionic gelation method wherein zinc acetate was preferred as a crosslinking agent. The optimization of IPN microbeads was performed employing a 3²-factorial design wherein concentration of pectin and NG was considered as independent factors whereas dependant factors are entrapment efficiency and drug release. Importantly, carboxylic functionality of low methoxy (LM) pectin and hydroxylic functionality NG cross-linked with Zn⁺² forms a 3D network. Diffractogram and thermogram revealed that conversion of drug from crystalline to amorphous form because of entrapment of drug within polymeric network. Anticipated floating microbeads showed that polymer concentration had considerable effect on drug encapsulation efficiency and drug release. Briefly, optimizing floating microbeads (Batch B:5) showed maximum drug entrapment (87.47 %) with a delayed drug release (69.20 %, at 8 h) due to formation of strong IPN. Moreover, it showed good mucoadhesive aptitude with goat stomach mucosa because of entanglement between gum and mucus layer. In addition, use of calcium silicate assists to modulate floating profile of IPN microbeads. Therefore, designing dual crosslinked zinc-pectinate-NG mediated IPN floating mucoadhesive microbeads will offer a new substitute for floating delivery.

Gastroretentive Sustained-Release Tablets Combined with a Solid Self-Micro-Emulsifying Drug Delivery System Adsorbed onto Fujicalin®

Gastroretentive drug delivery systems (GRDDS) get retained in the stomach for a long time, thus facilitating the absorption of drugs in the upper gastrointestinal tract. However, drugs that are difficult to dissolve or unstable in an acidic environment are not suitable for GRDDS. The current study designs GRDDS combined with a self-micro-emulsifying drug delivery system (SMEDDS) for drugs with solubility or stability problems in the stomach. The model drug fenofibrate was formulated into the optimized liquid SMEDDS composed of 50 w/w% Capryol^® PGMC, 40 w/w% Kolliphor^® RH40, and 10 w/w% Transcutol^® HP and solidified through adsorption on several porous adsorbents. In a dissolution medium at pH 1.2, the powdered SMEDDS using Fujicalin^® dissolved quickly and achieved higher drug dissolution than other adsorbents. Based on these results, a gastroretentive bilayer tablet consisting of a drug release layer and a swelling layer was designed. The drug release layer was formulated with the powdered SMEDDS and hydroxypropyl methylcellulose (HPMC) as a release modifier. HPMC was also added to the swelling layer as a water-swellable polymer. The dissolution rate depended on the viscosity of the HPMC in the drug release layer. The time for 90% drug release was extended from 3.7 to 12.0 h by increasing the viscosity grade of HPMC from 0.1 to 100 K. Moreover, the tablet swelled and maintained a size comparable to a human pylorus diameter or more for at least 24 h. This GRDDS could apply to a broader range of drug candidates.

Pharmacokinetics and Bioequivalence Estimation of Two Formulations of Alfuzosin Extended-Release Tablets

Alfuzosin is a medication approved by the US Food and Drug Administration to treat benign prostatic hyperplasia symptoms. Bioequivalence studies are demanded by regulatory authorities to evaluate the expected in vivo biological similarity of 2 formulations of a medication. The aim of this study is to assess the bioavailability of the generic (test) and branded (reference) formulations of 10-mg alfuzosin extended-release tablets after oral administration to healthy adults under fed conditions. The study used a comparative randomized, single-dose, 2-way crossover open-label study design. Thirty-three participants were recruited and completed the clinical assessment. The pharmacokinetic parameters maximum plasma concentration (C_max ), area under the plasma concentration-time curve (AUC_0-t ), AUC extrapolated to infinity (AUC_0-∞ ), time to maximum concentration, and elimination half-life were estimated to prove bioequivalence. The confidence intervals for the log-transformed test/reference ratios for alfuzosin 110.7% (98.0-124.9) and 112.0% (101.9-123.1) for C_max and AUC_0-t respectively, which are within the allowed limits specified by the regulatory authorities (80-125% for C_max and AUC_0-t ). The test formulation can therefore be prescribed as an alternative to the reference for symptomatic treatment of benign prostatic hyperplasia.

Stimuli-responsive In situ gelling system for nose-to-brain drug delivery

The diagnosis and treatment of neurological ailments always remain an utmost challenge for research fraternity due to the presence of BBB. The intranasal route appeared as an attractive and alternative route for brain targeting of therapeutics without the intrusion of BBB and GI exposure. This route directly and effectively delivers the therapeutics to different regions of the brain via olfactory and trigeminal nerve pathways. However, shorter drug retention time and mucociliary clearance curtail the efficiency of the intranasal route. The in situ mucoadhesive gel overthrow the limitations of direct nose-to-brain delivery by not only enhancing nasal residence time but also minimizing the mucociliary clearance and enzymatic degradation. This delivery system further improves the nasal absorption as well as bioavailability of drugs in the brain. The in situ mucoadhesive gel is a controlled and sustained release system that facilitates the absorption of various proteins, peptides and other larger lipophilic and hydrophilic moieties. Owing to multiple benefits, in situ gelling system has been widely explored to target the brain via nasal route. However, very few review works are reported which explains the application of in situ nasal gel for brain delivery of CNS acting moieties. Hence, in this piece of work, we have initially discussed the global statistics of neurological disorders reported by WHO and other reputed organizations, nasal anatomy, mechanism and challenges of nose-to-brain drug delivery. The work mainly focused on the use of different stimuli-responsive polymers, specifically thermoresponsive, pH-responsive, and ion triggered systems for the development of an effective and controlled dosage form, i.e., in situ nasal gel for brain targeting of bioactives. We have also highlighted the origin, structure, nature and phase transition behavior of the smart polymers found suitable for nasal administration, including poloxamer, chitosan, EHEC, xyloglucan, Carbopol, gellan gum and DGG along with their application in the treatment of neurological disorders. The article is aimed to gather all the information of the past 10 years related to the development and application of stimuli-responsive in situ nasal gel for brain drug delivery.

Alfuzosin hydrochloride-loaded low-density gastroretentive sponges: development, in vitro characterization and gastroretentive monitoring in healthy volunteers via MRI

The current work aimed to develop low-density gastroretentive sponges loaded with alfuzosin HCl (ALF) to sustain the rate of drug release, improve its oral bioavailability and deliver it to the main site of absorption. Sponges were developed, according to a 2³ full factorial design, by compression of the lyophilized ALF-loaded hydroxypropylmethylcellulose (HPMC) or chitosan (CH) solutions. The influences of the polymer type, grade and concentration on the appearance, topography, porosity, density, in vitro ALF release, floating behavior, swelling, erosion, and mucoadhesive potential of the developed sponges were explored. Based on the desirability value, the best achieved system was selected. The gastroretentive potential of this system was evaluated in healthy male volunteers via MRI. Soft and flexible sponges were developed. They were characterized with interconnecting pores and channels and had excellent floating properties with respect to floating lag time and duration. Compared to HPMC-based sponges, CH-based ones exhibited higher porosity, larger pore diameters, lower bulk densities, higher drug release rates, larger swelling ratios, faster erosion rates and better mucoadhesive properties. MRI of magnetite-loaded best-achieved CH-based system (F8) ascertained the development of a promising gastroretentive system; exhibiting a gastric residence period of at least 5 h.

In situ thermo-co-electroresponsive mucogel for controlled release of bioactive agent

The purpose of this work was to develop an in situ thermosensitive electro-responsive mucoadhesive gel loaded with bioactive agent (nanocomposite) meant for nose to brain delivery in a controllable manner when electric stimulation is applied. Nanocomposite was developed using a combinatorial blending of chitosan, hydroxypropylmethylcellulose, pluronic F127 and polyaniline which was then loaded with BCNU-Nano-co-Plex (the bioactive agent). The nanocomposite was a liquid at room temperature but formed an in situ mucogel at a temperature of 27.5 ± 0.5 °C. Furthermore, the nanocomposite possessed a redox element which makes it responsive to electrical stimulation (ES). The stimuli responsiveness enabled the formulation to release the bioactive agent when electrical potential was applied and demonstrated a desired 10.28% release of nanoparticles per application cycle. The results further revealed pore formation within the formulation which accommodated the loaded nanoparticles. The release profile also demonstrated a pulsatile release of the bioactive material when subjected to ES. This formulation may therefore be useful as a nose to brain drug delivery system that can be modulated to deliver bioactive agents to the brain via electro-actuation in an "on-off" drug release kinetics by means of an external ES for a controlled nose-to-brain delivery.

Development and Evaluation of Compression Coating Gastro-Floating Tablet of Alfuzosin Hydrochloride for Zero-Order Controlled Release

Alfuzosin hydrochloride is an appropriate candidate drug to prepare a gastro-retention controlled release dosage form since it demonstrates a narrow absorption window in the proximal section of the gastrointestinal tract with a short half-life. The purpose of the present study was to develop and optimize a gastro-floating tablet of alfuzosin hydrochloride by using the compression coating method for controlling drug release in a controlled manner. The floating tablets were developed utilizing hydroxypropyl methylcellulose and carbomer as matrix materials. The impact of formulation factors on buoyancy property and in vitro drug release of the floating tablet was investigated. The "similarity factor" (f₂) was used as the indicator for the optimization of the formulations. Furthermore, in vivo pharmacokinetic study in rabbits and correlation of in vitro/in vivo study were also performed. It was found that the optimized formulation F9 could float immediately less than 2 min and remain lastingly buoyant over 24 h and follow zero-order release kinetics well. In comparison with the commercially available prolonged release tablets XATRAL® XL, the prepared floating tablet exhibited similar pharmacokinetic parameters (C_max, T_max, t_1/2, and AUC_0 - t) and plasma concentration versus time profile. Moreover, it indicated from the correlation of in vitro/in vivo study that the floating tablets exhibited a good correlation of in vitro/in vivo. In summary, the compression coating gastro-floating tablets might be a promising drug delivery system for alfuzosin hydrochloride to control drug release.

Design and optimization of gastric floating sustained-release mini-tablets of alfuzosin hydrochloride based on a factorial design: in vitro/in vivo evaluation

The purpose of this research was to develop multiple-unit gastric floating mini-tablets and to evaluate the possibility of using these mini-tablets as a delivery system to improve the drug absorption for drugs with a narrow absorption window. Mini-tablets were prepared using hydroxypropyl methylcellulose (HPMC K100M) and carbopol 971P as release retarding agents and sodium bicarbonate (NaHCO₃) as gas-forming agent. The properties of the prepared mini-tablets in terms of floating characteristic parameters and in vitro release were evaluated. Furthermore, in vivo gastric retention study in rats and in vivo pharmacokinetic study in rabbits of the optimized formulation were performed. The optimized mini-tablets containing 45% HPMC K100M, 15% stearyl alcohol, 13% carbopol 971P, and 12% NaHCO₃ were found to float immediately within 1 min and duration more than 9 h. The in vivo gastric retention study results indicated that the mini-tablets could retain in the stomach for more than 6.67 h. Furthermore, the AUC_0-t of the floating mini-tablets (6849.83 ± 753.80 h ng·mL^-1) was significantly higher than that of marketed sustained-release tablets XATRAL®XL (4970.16 ± 924.60 h ng·mL^-1). All these results illustrated that the gastric floating mini-tablets might be a promising drug delivery system for drugs with a narrow absorption window.

Denatured Whey Protein Powder as a New Matrix Excipient: Design and Evaluation of Mucoadhesive Tablets for Sustained Drug Release Applications

PURPOSE

In earlier study, we proposed denatured whey protein (DWP) powder obtained by atomization as a new excipient to promote oral drug delivery. In this work, we evaluate the possibility to formulate tablets based on DWP powders and to characterize their role as a matrix mucoadhesive excipient.

METHODS

Tablets containing increased amount of DWP (10 to 30%) were produced by direct compression after mixing with theophylline, microcrystalline cellulose, Aerosil® and magnesium stearate. Dissolution behaviors of obtained tablets were evaluated in different USP buffers (pH 1.2, 4.5 and 6.8) and in simulated gastric and intestinal fluids and mechanisms analyzed by multiple mathematical models. Swelling, erosion and mucoadhesion were also evaluated. Finally, release and absorption were studied in the artificial digestive system (TIM 1).

RESULTS

Tablets based on DWP and containing 300 mg of theophylline were obtained by direct compression. These tablets exhibited controlled release driven by diffusion starting from 15% DWP content whatever the pH studied. They also showed a great extent of swelling and water uptake while matrix weight loss was limited. Addition of enzymes accelerated drug release which became governed by erosion according to Peppas model.

CONCLUSIONS

The present study shows that DWP powders can be successfully used as a pharmaceutical excipient, and in particular as a matrix mucoadhesive controlled release tablets.

Mucoadhesive-floating zinc-pectinate-sterculia gum interpenetrating polymer network beads encapsulating ziprasidone HCl

A novel dual crosslinked low-methoxyl (LM) pectinate-sterculia gum (SG) interpenetrating polymer network (IPN) beads was developed for intragastric ziprasidone delivery. The IPN beads were accomplished by simultaneous ionotropic gelation with zinc acetate and covalent crosslinking with glutaraldehyde. The effects of pectin and SG contents on drug entrapment efficiency (DEE, %), and cumulative drug release after 8h (Q8, %) were studied to optimize the IPN beads using a 3(2) factorial design. The optimized beads encapsulating ziprasidone HCl (F-O) displayed DEE of 87.98±1.15% and Q8 of 58.81±1.50% with excellent buoyancy (floating lag time <2min, % buoyancy at 8h >63%) and good mucoadhesivity with the goat gastric mucosa. In most cases, the drug release behaviour obeyed Higuchi kinetics with anomalous transport mechanism. The Zn-pectinate-SG IPN beads were also characterized by SEM, FTIR, DSC and P-XRD analyses.