Physical-Chemical Characterization and Formulation Considerations for Solid Lipid Nanoparticles

Technology for Biobanking of Epididymal Spermatozoa from Patient with Obstructive Azoospermia: Case Report about Baby Born after Conventional Freezing Only with a Nonpermeable Cryoprotectant 360 kDa Polyvinylpyrrolidone

This publication reports, for the first time, the birth of a healthy child after intracytoplasmic sperm injection (ICSI) of motile spermatozoa after conventional ("slow") freezing of epididymal spermatozoa using 5% polyvinylpyrrolidone (PVP) of high molecular weight (360 kDa). Cryopreservation solution with 10% PVP was added to 30 µL of spermatozoa suspension in a 1:1 ratio, with a final PVP concentration of 5%. Then, polycarbonate capillaries for oocyte denudation with a diameter of 170 µm were filled with 60 µL of the resulting sperm suspension. After that, the capillaries were placed for 10 minutes at a height of 15 cm above liquid nitrogen and immersed into liquid nitrogen. To warm the spermatozoa, the capillaries were immersed in a water bath at a temperature of 40°C for 30 seconds. Oocyte fertilization was performed by ICSI. Zygotes were cultured in vitro for 5 days to the blastocyst stage. More than 100 spermatozoa were obtained after percutaneous epidydimal sperm aspiration, of which 80% were motile. After cryopreservation, storage for 3 months in liquid nitrogen, and thawing, 72% of the total sperm cells remained motile. Ten oocyte-cumulus complexes were found after follicle puncture, and eight metaphase II stage oocytes were fertilized using ICSI. After 18 hours, two pronuclei were found in seven (88%) of the oocytes. An analysis of the morphological characteristics of 5-day-old embryos showed that four (57%) of them reached the blastocyst stage. One embryo was transferred, and the remaining embryos were cryopreserved (vitrified). The onset of pregnancy was detected on the 14th day after embryo transfer, and one healthy girl (3300 g) was born at term.

The landscape of nanoparticle-based siRNA delivery and therapeutic development

Five small interfering RNA (siRNA)-based therapeutics have been approved by the Food and Drug Administration (FDA), namely patisiran, givosiran, lumasiran, inclisiran, and vutrisiran. Besides, siRNA delivery to the target site without toxicity is a big challenge for researchers, and naked-siRNA delivery possesses several challenges, including membrane impermeability, enzymatic degradation, mononuclear phagocyte system (MPS) entrapment, fast renal excretion, endosomal escape, and off-target effects. The siRNA therapeutics can silence any disease-specific gene, but their intracellular and extracellular barriers limit their clinical applications. For this purpose, several modifications have been employed to siRNA for better transfection efficiency. Still, there is a quest for better delivery systems for siRNA delivery to the target site. In recent years, nanoparticles have shown promising results in siRNA delivery with minimum toxicity and off-target effects. Patisiran is a lipid nanoparticle (LNP)-based siRNA formulation for treating hereditary transthyretin-mediated amyloidosis that ultimately warrants the use of nanoparticles from different classes, especially lipid-based nanoparticles. These nanoparticles may belong to different categories, including lipid-based, polymer-based, and inorganic nanoparticles. This review briefly discusses the lipid, polymer, and inorganic nanoparticles and their sub-types for siRNA delivery. Finally, several clinical trials related to siRNA therapeutics are addressed, followed by the future prospects and conclusions.

Fabrication of Sustained Release Curcumin-Loaded Solid Lipid Nanoparticles (Cur-SLNs) as a Potential Drug Delivery System for the Treatment of Lung Cancer: Optimization of Formulation and In Vitro Biological Evaluation

The goal of current research was to develop a new form of effective drug, curcumin-loaded solid lipid nanoparticles (Cur-SLNs) and test its efficacy in the treatment of lung cancer. Different batches of SLNs were prepared by the emulsification-ultrasonication method. For the optimization of formulation, each batch was evaluated for particle size, polydispersity index (PI), zeta potential (ZP), entrapment efficiency (EE) and drug loading (DL). The formulation components and process parameters largely affected the quality of SLNs. The SLNs obtained with particle size, 114.9 ± 1.36 nm; PI, 0.112 ± 0.005; ZP, -32.3 ± 0.30 mV; EE, 69.74 ± 2.03%, and DL, 0.81 ± 0.04% was designated as an optimized formulation. The formulation was freeze-dried to remove excess water to improve the physical stability. Freeze-dried Cur-SLNs showed 99.32% of drug release and demonstrated a burst effect trailed by sustained release up to 120 h periods. The erythrocyte toxicity study of Cur-SLNs and its components demonstrated moderate hemolytic potential towards red blood cells (RBCs). The cytotoxic potential of the formulation and plain curcumin was estimated using 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide (MTT) assay against A549 cell line. After 48 h of incubation, Cur-SLNs demonstrated more cytotoxicity (IC₅₀ = 26.12 ± 1.24 µM) than plain curcumin (IC₅₀ = 35.12 ± 2.33 µM). Moreover, the cellular uptake of curcumin was found to be significantly higher from Cur-SLNs (682.08 ± 6.33 ng/µg) compared to plain curcumin (162.4 ± 4.2 ng/µg). Additionally, the optimized formulation was found to be stable over the period of 90 days of storage. Hence, curcumin-loaded SLNs can be prepared using the proposed cost effective method, and can be utilized as an effective drug delivery system for the treatment of lung cancer, provided in vivo studies warrant a similar outcome.

Perspectives of using microRNA-loaded nanocarriers for epigenetic reprogramming of drug resistant colorectal cancers

Epigenetic regulation by microRNAs (miRs) demonstrated a promising therapeutic potential of these molecules to regulate genetic activity in different cancers, including colorectal cancers (CRCs). The RNA-based therapy does not change genetic codes in tumor cells but can silence oncogenes and/or reactivate inhibited tumor suppressor genes. In many cancers, specific miRs were shown to promote or stop tumor progression. Among confirmed and powerful epigenetic regulators of colon carcinogenesis and development of resistance are onco-miRs, which include let-7, miR-21, miR-22, miR-23a, miR-27a, miR-34, miR-92, miR-96, miR-125b, miR-135b, miR-182, miR-200c, miR-203, miR-221, miR-421, miR-451, and others. Moreover, various tumor-suppressor miRs (miR-15b-5b, miR-18a, miR-20b, miR-22, miR-96, miR-139-5p, miR-145, miR-149, miR-197, miR-199b, miR-203, miR-214, miR-218, miR-320, miR-375-3p, miR-409-3p, miR-450b-5p, miR-494, miR-577, miR-874, and others) were found silenced in drug-resistant CRCs. Re-expression of tumor suppressor miR is complicated by the chemical nature of miRs that are not long-lasting compounds and require protection from the enzymatic degradation. Several recent studies explored application of miRs using nanocarrier complexes. This study critically describes the most successfully tested nanoparticle complexes used for intracellular delivery of nuclear acids and miRs, including micelles, liposomes, inorganic and polymeric NPs, dendrimers, and aptamers. Nanocarriers shield incorporated miRs and improve the agent stability in circulation. Attachment of antibodies and/or specific peptide or ligands facilitates cell-targeted miR delivery. Addressing in vivo challenges, a broad spectrum of non-toxic materials has been tested and indicated reliable advantages of lipid-based (lipoplexes) and polymer-based liposomes. Recent cutting-edge developments indicated that lipid-based complexes with multiple cargo, including several miRs, are the most effective approach to eradicate drug-resistant tumors. Focusing on CRC-specific miRs, this review provides a guidance and insights towards the most promising direction to achieve dramatic reduction in tumor growth and metastasis using miR-nanocarrier complexes.

Features, applications, and sustainability of lipid nanoparticles in cosmeceuticals

Cosmeceuticals are a branch of cosmetic products that forms a bridge between cosmetic and drug products. It is a fast-growing branch of the cosmetic industry, especially after the introduction of novel formulation and manufacturing techniques such as lipid nanoparticles (LNPs). These LNPs-based cosmeceutical products offer several advantages such as enhanced bioavailability of cosmeceutical active ingredients (CAIs), improved aesthetic appeal, and stability of the final products. However, the use of these LNPs may raise some concerns about possible side effects of these LNPs and potential hazards to the customer’s health. Accordingly, an update that focuses on the use of this important branch of nanoparticles is necessary since most review papers are dealing with all types of nanocarriers in the same review with little focus on LNPs. Therefore, in the current review, a detailed analysis of the advantages and disadvantages of LNPs in this field was highlighted, to emphasize the LNPs-based cosmeceuticals on the market, as well as the potential risk posed by LNPs on exposure and recently introduced regulatory guidelines to address them. In addition, if these products can be a candidate as products that meet the sustainable development goals raised by the UN are discussed.

New method for cryoprotectant-free freezing of human oligoasthenoteratozoospremic spermatozoa with high-molecular polymer

Data about cryoprotectant-free cryopreservation of human ICSI spermatozoa are limited. The aim of this investigation was to compare two technologies for cryopreservation of spermatozoa from men with oligoasthenoteratozoospermia: standard conventional freezing with 5% glycerol (freezing in glycerol) and cryoprotectant-free freezing with 5% high-molecular-weight (360 kDa) polyvinylpyrrolidone (PVP) (PVP-freezing). Capillaries with spermatozoa were cooled in vapor and then plunginged into liquid nitrogen. Head-, midpiece- and tail-abnormality of spermatozoa, mitochondrial membrane potential (MMP) and DNA fragmentation rates after cryopreservation were evaluated. After warming of spermatozoa, fertilization of oocytes (ICSI) was performed. It was detected the lower rate of morphological abnormalities of PVP-frozen spermatozoa in comparison with cells frozen with glycerol (34.6 ± 4.1% vs. 20.7 ± 4.7%, respectively) (P < 0.05). Quality of cells with high MMP after warming in spermatozoa frozen with glycerol was lower than in PVP-frozen spermatozoa (34.7 ± 4.2 vs. 54.5 ± 4.2%, respectively) (P < 0.05). It was established that the DNA fragmentation rate in PVP-frozen spermatozoa was significantly lower in comparison with spermatozoa frozen with glycerol (23.1 ± 2.5% vs. 38.8 ± 3.0%, respectively) (P < 0.05). After fertilization (ICSI) of oocytes, it was established that cleavage and blastulation rates were higher in oocytes after fertilization with PVP-frozen spermatozoa than with spermatozoa frozen with glycerol. Fertilization-, development to 8-blastomeres-, and blastocyst-rates were for PVP-frozen and spermatozoa frozen with glycerol, respectively: 94.4 ± 7.8 vs. 82.2 ± 6.2% (P > 0.1 with tendency to increasing), 90.0 ± 4.6 vs. 69.5 ± 5.1% (P < 0.05), and 45.4 ± 4.1% vs. 30.9 ± 3.3% (P < 0.05). It was concluded that permeable cryoprotectant-free freezing with 5% high-molecular-weight (360 kDa) polyvinylpyrrolidone can be applied successfully for cryopreservation of human oligoasthenoteratozoospremic spermatozoa.

Insight Into the Prospects for RNAi Therapy of Cancer

RNA interference (RNAi), also known as gene silencing, is a biological process that prevents gene expression in certain diseases such as cancer. It can be used to improve the accuracy, efficiency, and stability of treatments, particularly genetic therapies. However, challenges such as delivery of oligonucleotide drug to less accessible parts of the body and the high incidence of toxic side effects are encountered. It is therefore imperative to improve their delivery to target sites and reduce their harmful effects on noncancerous cells to harness their full potential. In this study, the role of RNAi in the treatment of COVID-19, the novel coronavirus disease plaguing many countries, has been discussed. This review aims to ascertain the mechanism and application of RNAi and explore the current challenges of RNAi therapy by identifying some of the cancer delivery systems and providing drug information for their improvement. It is worth mentioning that delivery systems such as lipid-based delivery systems and exosomes have revolutionized RNAi therapy by reducing their immunogenicity and improving their cellular affinity. A deeper understanding of the mechanism and challenges associated with RNAi in cancer therapy can provide new insights into RNAi drug development.

Effect of α-tocopherol on the physicochemical, antioxidant and antibacterial properties of levofloxacin loaded hybrid lipid nanocarriers

Non-toxic hybrid lipidic nanoparticles become a promising tool for enhanced lung delivery of levofloxacin in combination with antioxidant properties.

Nanoformulations for Ocular Delivery of Drugs - A Patent Perspective

Efficient delivery of ocular therapeutics with improved efficacy, enhanced bioavailability, and acceptable patient compliance presents unique challenges. This can be attributed to the presence of protective mechanisms, physicobiological barriers, and structural obstacles in the eye. Nanotherapeutic interventions have been explored extensively over the past few years to overcome these limitations. The present review focusses on the nanoformulations developed for the diagnosis and treatment of various ocular diseases besides providing an in-depth insight into the patents reported for the same.

The Roles of Nanoparticles in Stem Cell-Based Therapy for Cardiovascular Disease

Cardiovascular disease (CVD) is currently one of the primary causes of mortality and morbidity worldwide. Nanoparticles (NPs) are playing increasingly important roles in regulating stem cell behavior because of their special features, including shape, size, aspect ratio, surface charge, and surface area. In terms of cardiac disease, NPs can facilitate gene delivery in stem cells, track the stem cells in vivo for long-term monitoring, and enhance retention after their transplantation. The advantages of applying NPs in peripheral vascular disease treatments include facilitating stem cell therapy, mimicking the extracellular matrix environment, and utilizing a safe non-viral gene delivery tool. However, the main limitation of NPs is toxicity, which is related to their size, shape, aspect ratio, and surface charge. Currently, there have been many animal models proving NPs’ potential in treating CVD, but no extensive applications of stem-cell therapy using NPs are available in clinical practice. In conclusion, NPs might have significant potential uses in clinical trials of CVD in the future, thereby meeting the changing needs of individual patients worldwide.

3D-printed microfluidic chip for the preparation of glycyrrhetinic acid-loaded ethanolic liposomes

18-α-Glycyrrhetinic acid (GA) is a bioactive compound extracted from licorice that exhibits many biological and pharmacological effects such as anti-inflammatory and antioxidant activities on the skin. However, its lipophilic nature results in poor bioavailability that limits clinical applications. Liposomes, presenting the ability to carry both hydrophobic and hydrophilic payloads and a good cytocompatibility, are effective to overcome this barrier. Furthermore, the addition of permeation enhancers such as ethanol into liposomal formulations helps the diffusion of these systems through the skin barrier. Here, we aimed to formulate GA-loaded ethanolic liposomes, using a natural soybean lecithin via a microfluidic approach. Using a fused deposition modeling (FDM) 3D printer we customized a microfluidic chip, and manufactured vesicles that presented spherical shape with a size of 202 ± 5.2 nm, a narrow size distribution and a good stability over a period of 30 days. After reaching a drug encapsulation efficiency of 63.15 ± 2.2%, liposomes were evaluated for their cytocompatibility and skin permeation potentiality after hydrogelation using xanthan gum. The in vitro release and permeation studies were performed using Franz diffusion cells comparing two different media and three synthetic membranes including a polymeric skin-mimicking membrane. The selected formulation presented no cytotoxicity and an increased permeation compared to GA saturated hydrogel. It could perform therapeutically better effects than conventional formulations containing free GA, as prolonged and controlled release topical dosage forms, which may lead to improved efficiency and better patient compliance.

Preparation, Characterization and Antioxidant Evaluation of Poorly Soluble Polyphenol-Loaded Nanoparticles for Cataract Treatment

Cataract, one of the leading causes of blindness worldwide, is a condition in which complete or partial opacity develops in the lens of the eyes, thereby impairing vision. This study aimed to examine the potential therapeutic and protective effects of poorly soluble polyphenols like curcumin, resveratrol, and dibenzoylmethane, known to possess significant antioxidant activity. The polyphenols were loaded into novel lipid-cyclodextrin-based nanoparticles and characterized by particle size, polydispersity index, differential scanning calorimetry, thermogravimetric analysis, X-ray diffraction, scanning electron microscopy (SEM), entrapment efficiency, and release studies. Ferric-reducing ability of plasma and 2,2-diphenyl-1-picrylhydrazyl chemical assays were used to evaluate their antioxidant properties based on their free radical quenching ability. Biochemical in vitro assays were used to examine these polyphenols on hydrogen peroxide-induced formation of cataracts in bovine lenses by estimating total glutathione content and superoxide dismutase activity. Nanoparticles were thermostable and amorphous. Particle size of curcumin, resveratrol, and dibenzoylmethane nanoparticles were 331.0 ± 17.9 nm, 329.9 ± 1.9 nm, and 163.8 ± 3.2 nm, respectively. SEM confirmed porous morphology and XRD confirmed physical stability. Entrapment efficiency for curcumin-, resveratrol-, and dibenzoylmethane-loaded nanoparticles was calculated to be 84.4 ± 2.4%, 72.2 ± 1.5%, and 86.4 ± 0.6%, respectively. In vitro release studies showed an initial burst release followed by a continuous release of polyphenols from nanoparticles. Chemical assays confirmed the polyphenols' antioxidant activity. Superoxide dismutase and glutathione levels were found to be significantly increased (p < 0.05) after treatment with polyphenol-loaded nanoparticles than pure polyphenols; thus, an improved antioxidant activity translational into potential anticataract activity of the polyphenols when loaded into nanoparticles was observed as compared to pure polyphenols.

RNA interference-based therapy and its delivery systems

RNA interference (RNAi) is considered a highly specific approach for gene silencing and holds tremendous potential for treatment of various pathologic conditions such as cardiovascular diseases, viral infections, and cancer. Although gene silencing approaches such as RNAi are widely used in preclinical models, the clinical application of RNAi is challenging primarily because of the difficulty in achieving successful systemic delivery. Effective delivery systems are essential to enable the full therapeutic potential of RNAi. An ideal nanocarrier not only addresses the challenges of delivering naked siRNA/miRNA, including its chemically unstable features, extracellular and intracellular barriers, and innate immune stimulation, but also offers "smart" targeted delivery. Over the past decade, great efforts have been undertaken to develop RNAi delivery systems that overcome these obstacles. This review presents an update on current progress in the therapeutic application of RNAi with a focus on cancer therapy and strategies for optimizing delivery systems, such as lipid-based nanoparticles.

Drug-Lipid-Surfactant Miscibility for the Development of Solid Lipid Nanoparticles

This research aimed to study the correlation between miscibility of flutamide (FLT), lipids and surfactant on the particle size of solid lipid nanoparticles (SLNs). Physical mixtures (PMs) of lipids-glyceryl monooleate (GMO), Precirol® (glyceryl palmitostearate, PRE), glyceryl monostearate (GMS), and Compritol® (glyceryl dibehenate, COM) were prepared with surfactant-Gelucire® (stearoyl polyoxyl-32 glycerides, GEL) 50/13 and 44/14. PMs were prepared in 5:2 w/w ratio (lipid:surfactant) and 2:1 w/w (Flutamide (FLT):lipids/GEL 50/13) by co-melting. Miscibility of PMs was investigated using modulated differential scanning calorimetry (MDSC). SLNs with and without drug were prepared using GEL 50/13 by the ultra-sonication method and particle size analysis was conducted. PMs of GMO, GMS, and PRE with both surfactants showed a decrease in the melting temperature, no change in melting and crystallization peak was observed with COM-GELs, indicating immiscibility. Similarly, MDSC data suggests good miscibility of FLT in GMO, GMS, and GEL 50/13 but not in PRE and COM. The particle size of drug-loaded SLNs prepared from GMO and GMS with GEL 50/13 was found to be 70.2 ± 5.4 and 92.6 ± 8.5 compared to > 200-nm particles obtained from PRE and COM. On lyophilization, an increase in particles size was observed with COM only. The particle size of SLNs with PRE and COM was prominently increased during stability studies indicating SLNs prepared with GMO and GMS are more stable due to miscibility and ability to reduce the crystallinity of FLT. The results established a good correlation between drug, lipids, and surfactants miscibility to the obtained particle size of SLNs before and after lyophilization. Graphical Abstract ᅟ.

Critical In Vitro Characterization Methods of Lipid-Based Formulations for Oral Delivery: a Comprehensive Review

Lipids have been extensively used in formulations to enhance dissolution and bioavailability of poorly water-soluble as well as water-soluble drug molecules. The digestion of lipid-based formulations, in the presence of bile salts, phospholipids, and cholesterol, changes the lipid composition in vivo, resulting in the formation of different colloidal phases in the intestine. Therefore, in vitro characterization and evaluation of such formulations are critical in developing a successful formulation. This review covers comprehensive discussion on in vitro characterization techniques such as solubility, drug entrapment, thermal characterization, dissolution, and digestion of lipid-based formulations.

Physicochemical characterization of solid lipid nanoparticles comprised of glycerol monostearate and bile salts

Successful applications of solid lipid nanoparticles (SLNs) rely on their physicochemical properties which are mainly governed by their comprising materials (e.g., lipids, emulsifiers) and preparation methods. We have prepared biocompatible solid lipid nanoparticles with glycerol monostearate as lipid and varying combinations of bile salts sodium deoxycholate and sodium cholate (bile salts to lipid ratio 8% w/w) as emulsifiers. The detailed characterization of solid lipid nanoparticles was performed using a combination of light scattering, microscopic, calorimetric, and spectroscopic techniques. It was seen that different compositions of bile salts yield nanoparticles with different sizes. The use of only sodium deoxycholate (8% w/w) produces nanoparticles with average sizes ∼487 nm. The average particle size increases with increasing cholate fraction. A higher average particle size around ∼652 nm is obtained with 8% (w/w) sodium cholate. All the SLNs show good physical stability at room temperature and do not show polymorphic transformation during the storage. In order to study the microenvironments, solid lipid nanoparticles are loaded with an external fluorescent-probe fisetin (probe to lipid ratio 1% w/w). Photophysical properties of fisetin loaded SLNs indicate the micro-heterogenicity inside the nanoparticles.

Optimization of solid lipid nanoparticles prepared by a single emulsification-solvent evaporation method

This data article contains the data related to the research article “Characterization, biorecognitive activity and stability of WGA grafted lipid nanostructures for the controlled delivery of rifampicin” (Pooja et al. 2015) [1]. In the present study, SLN were prepared by a single emulsification-solvent evaporation method and the various steps of SLN preparation are shown in a flow chart. The preparation of SLN was optimized for various formulation variables including type and quantity of lipid, surfactant, amount of co-surfactant and volume of organic phase. Similarly, effect of variables related to homogezation, sonication and stirring processes, on the size and surface potential of SLN was determined and optimized.