Optimization and Evaluation of the Thermosensitive In Situ and Adhesive Gel for Rectal Delivery of Budesonide

Preparation and In Vitro and In Vivo Evaluation of Rectal In Situ Gel of Meloxicam Hydroxypropyl-β-cyclodextrin Inclusion Complex

Meloxicam (MLX) is one of the most effective NSAIDs, but its poor water solubility and low bioavailability limit its clinical application. In this study, we designed a thermosensitive in situ gel of the hydroxypropyl-β-cyclodextrin inclusion complex (MLX/HP-β-CD-ISG) for rectal delivery to improve bioavailability. The best method for preparing MLX/HP-β-CD was the saturated aqueous solution method. The optimal inclusion prescription was optimized using an orthogonal test, and the inclusion complex was evaluated via PXRD, SEM, FTIR and DSC. Then, MLX/HP-β-CD-ISG was characterized regarding the gel properties, release in vitro, and pharmacokinetics in vivo. The inclusion rate of the inclusion complex obtained via the optimal preparation process was 90.32 ± 3.81%. The above four detection methods show that MLX is completely embedded in the HP-β-CD cavity. The developed MLX/HP-β-CD-ISG formulation has a suitable gelation temperature of 33.40 ± 0.17 °C, a gelation time of 57.33 ± 5.13 s, pH of 7.12 ± 0.05, good gelling ability and meets the requirements of rectal preparations. More importantly, MLX/HP-β-CD-ISG significantly improved the absorption and bioavailability of MLX in rats, prolonging the rectal residence time without causing rectal irritation. This study suggests that the MLX/HP-β-CD-ISG can have a wide application prospect with superior therapeutic benefits.

Self-Double-Emulsifying Drug Delivery System Enteric-Coated Capsules: A Novel Approach to Improve Oral Bioavailability and Anti-inflammatory Activity of Panax notoginseng Saponins

In this work, self-double-emulsifying drug delivery system enteric-coated capsules (PNS-SDE-ECC) were used to enhance the oral bioavailability and anti-inflammatory effects of Panax notoginseng saponins (PNS), which are rapidly biodegradable, poorly membrane permeable, and highly water-soluble compounds. The PNS-SDEDDS formulated by a modified two-step method spontaneously emulsified to W/O/W double emulsions in the outer aqueous solution, which significantly promoted the absorption of PNS in the intestinal tract. The release study revealed that PNS-SDE-ECC exhibited sustained release of PNS within 24 h and the stability study indicated that PNS-SDE-ECC were stable at room temperature for up to 3 months. Furthermore, compared to PNS gastric capsules, the relative bioavailability of NGR1, GRg1, GRe, GRb1, and GRd in PNS-SDE-ECC was increased by 4.83, 10.78, 9.25, 3.58, and 4.63 times, respectively. More importantly, PNS-SDE-ECC significantly reduced OXZ-induced inflammatory damage in the colon by regulating the expression of TNF-α, IL-4, IL-13, and MPO cytokines. Overall, the prepared PNS-SDE-ECC may serve as a viable vehicle for increasing the oral bioavailability of PNS and its anti-inflammatory action on ulcerative colitis.

Thermoresponsive mucoadhesive hybrid gels in advanced drug delivery systems

Thermoresponsive polymers have seen extensive use in the development of stimuli-responsive drug formulations for oral, buccal, nasal, ocular, topical, rectal, parenteral, and vaginal routes of administration. Despite their great potential, their use has been limited by various obstacles, such as undesirable high polymer concentration, wide gelation temperature, low gel strength, poor mucoadhesiveness, and short retention. Mucoadhesive polymers have been suggested to improve the mucoadhesive features of thermoresponsive gels, leading to increased drug bioavailability and efficacy. This article highlights the use of in-situ thermoresponsive mucoadhesive hydrogel blends or hybrids that have been developed and assessed in various routes of administration.

Optimization and Evaluation of the Quercus infectoria Galls Thermosensitive In Situ Gel for Rectal Delivery

Quercus infectoria galls (QIGs) have a long history of treating ulcerative colitis (UC). The aqueous extract of QIG has an anti-UC effect. However, QIG's enema is easy to leak, and the action time and dose of the drug cannot be controlled well. Thus, QIG is inconvenient to use. This study aims to screen and prepare an optimized thermosensitive in situ gel with slow release and retention. Taking the transition sol-gel temperature (T _sol-gel) as the investigation index, the Box-Behnken design response surface method (BBD-RSM) was used to optimize the dosages of Poloxamer 407 (P407), Poloxamer 188 (P188), and hydroxypropyl methyl cellulose (HPMC). Moreover, three formulations were selected, and the in vitro release rates were further optimized. The optimized rates of P407, P188, and HPMC were 24.07%, 1.22%, and 0.60%, respectively, and T _sol-gel was 32.8°C ± 0.4°C. The cumulative release of gallic acid in the gel conformed to the first-order kinetic equation, and gallic acid was released entirely within 24 h. In addition, the morphological and chemical characterization of thermosensitive in situ gel demonstrated that excipients did not affect the characteristic functional groups of QIG and that the surface of the QIG gel had a porous and loose structure. Rheological methods showed that the QIG thermosensitive in situ gel was fluid at low temperature and semisolid at gelation temperature. Therefore, the prepared gel was sensitive to temperature and had slow-release, local retention properties.

Preparation of a novel tacrolimus ion sensitive ocular in situ gel and in vivo evaluation of curative effect of immune conjunctivitis

BACKGROUND

The aim of this study was to formulate a novel TAC preparation into an in situ gel for ocular drug delivery, in order to prolong the residence time on mucosal surfaces and increase patient compliance.

METHODS

The optimal formulation was characterized by surface morphology, gelling capacity, viscosity, stability and in vitro release. In vivo studies were also conducted to evaluate the precorneal retention and pharmacodynamic results.

RESULTS

In this study, the TAC in situ gel can be prepared by a simple solvent stirring method, and the optimized formulation exhibited good stability within 3 months. During storage, the initial viscosity of the formula had little change. The results of viscosity measurement showed that TAC in situ gel was typical of pseudo plastic systems and exhibited a marked increase in viscosity stimulated with STF. In vitro and in vivo studies illustrated that TAC in situ gel administration facilitated the retention and sustained release of TAC.

CONCLUSIONS

TAC combined with in situ gelling agents demonstrates an efficient topical drug delivery platform.

Preparation, in vitro and in vivo Evaluation of Thermosensitive in situ Gel Loaded with Ibuprofen-Solid Lipid Nanoparticles for Rectal Delivery

Background

Ibuprofen (IBU), a nonsteroidal anti-inflammatory drug, shows poor gastrointestinal absorption due to its low solubility, which limits its clinical application.

Objective

In the present study, we aimed to develop thermosensitive gel-mediated ibuprofen-solid lipid nanoparticles (IBU-SLN-ISG) to improve the dissolution and bioavailability of IBU after rectal delivery.

Methods

IBU-loaded SLNs (IBU-SLNs) were developed and optimized applying Box-Behnken design. The optimized IBU-SLNs were characterized by physicochemical parameters and morphology. Then, the optimized IBU-SLNs was incorporated into the gel and characterized for gel properties and rheology and investigated its release in vitro, pharmacokinetics in vivo, rectal irritation and rectal retention time.

Results

The optimized SLNs had an EE of 90.74 ± 1.40%, DL of 11.36 ± 1.20%, MPS of 166.77 ± 2.26 nm, PDI of 0.27 ± 0.08, and ZP of −21.00 ± 0.59 mV. The FTIR spectra confirmed successful encapsulation of the drug inside the nanoparticle as only peaks responsible for the lipid could be identified. This corroborated well with XRD spectra, which showed a completely amorphous state of the IBU-SLNs as compared to the crystalline nature of the pure drug. The gelation temperature of the prepared IBU-SLN-ISG was 33.30 ± 0.78°C, the gelation time was 14.67 ± 2.52 s, the gel strength was 54.00 ± 1.41 s, and the mucoadhesion was (11.54±0.37) × 10²dyne/cm². The in vitro results of IBU-SLNs and IBU-SLN-ISG showed a biphasic release pattern with initial burst release followed by sustained release. More importantly, IBU-SLN-ISG produced much better absorption of IBU and improved bioavailability in rats. In addition, IBU-SLN-ISG caused no irritation or damage to rectal tissues, and could be retained in the rectum for a long time.

Conclusion

Thermosensitive in situ gel loaded with IBU-solid lipid nanoparticles might be further developed as a more convenient and effective rectal dosage form.

Polymeric long-acting drug delivery systems (LADDS) for treatment of chronic diseases: Inserts, patches, wafers, and implants

Non-oral long-acting drug delivery systems (LADDS) encompass a range of technologies for precisely delivering drug molecules into target tissues either through the systemic circulation or via localized injections for treating chronic diseases like diabetes, cancer, and brain disorders as well as for age-related eye diseases. LADDS have been shown to prolong drug release from 24 h up to 3 years depending on characteristics of the drug and delivery system. LADDS can offer potentially safer, more effective, and patient friendly treatment options compared to more invasive modes of drug administration such as repeated injections or minor surgical intervention. Whilst there is no single technology or definition that can comprehensively embrace LADDS; for the purposes of this review, these systems include solid implants, inserts, transdermal patches, wafers and in situ forming delivery systems. This review covers common chronic illnesses, where candidate drugs have been incorporated into LADDS, examples of marketed long-acting pharmaceuticals, as well as newly emerging technologies, used in the fabrication of LADDS.