The control of nocifensive movements in the caterpillar Manduca sexta

In response to a noxious stimulus on the abdomen, caterpillars lunge their head towards the site of stimulation. This nocifensive 'strike' behavior is fast (∼0.5 s duration), targeted and usually unilateral. It is not clear how the fast strike movement is generated and controlled, because caterpillar muscle develops peak force relatively slowly (∼1 s) and the baseline hemolymph pressure is low (<2 kPa). Here, we show that strike movements are largely driven by ipsilateral muscle activation that propagates from anterior to posterior segments. There is no sustained pre-strike muscle activation that would be expected for movements powered by the rapid release of stored elastic energy. Although muscle activation on the ipsilateral side is correlated with segment shortening, activity on the contralateral side consists of two phases of muscle stimulation and a marked decline between them. This decrease in motor activity precedes rapid expansion of the segment on the contralateral side, presumably allowing the body wall to stretch more easily. The subsequent increase in contralateral motor activation may slow or stabilize movements as the head reaches its target. Strike behavior is therefore a controlled fast movement involving the coordination of muscle activity on each side and along the length of the body.

Stepping pattern changes in the caterpillar Manduca sexta: the effects of orientation and substrate

Most animals can successfully travel across cluttered, uneven environments and cope with enormous changes in surface friction, deformability and stability. However, the mechanisms used to achieve such remarkable adaptability and robustness are not fully understood. Even more limited is the understanding of how soft, deformable animals such as tobacco hornworm Manduca sexta (caterpillars) can control their movements as they navigate surfaces that have varying stiffness and are oriented at different angles. To fill this gap, we analyzed the stepping patterns of caterpillars crawling on two different types of substrate (stiff and soft) and in three different orientations (horizontal and upward/downward vertical). Our results show that caterpillars adopt different stepping patterns (i.e. different sequences of transition between the swing and stance phases of prolegs in different body segments) based on substrate stiffness and orientation. These changes in stepping pattern occur more frequently in the upward vertical orientation. The results of this study suggest that caterpillars can detect differences in the material properties of the substrate on which they crawl and adjust their behavior to match those properties.

Central pattern generating networks in insect locomotion

Central pattern generators (CPGs) are neural circuits that based on their connectivity can generate rhythmic and patterned output in the absence of rhythmic external inputs. This property makes CPGs crucial elements in the generation of many kinds of rhythmic motor behaviors in insects, such as flying, walking, swimming, or crawling. Arguably representing the most diverse group of animals, insects utilize at least one of these types of locomotion during one stage of their ontogenesis. Insects have been extensively used to study the neural basis of rhythmic motor behaviors, and particularly the structure and operation of CPGs involved in locomotion. Here, we review insect locomotion with regard to flying, walking, and crawling, and we discuss the contribution of central pattern generation to these three forms of locomotion. In each case, we compare and contrast the topology and structure of the CPGs, and we point out how these factors are involved in the generation of the respective motor pattern. We focus on the importance of sensory information for establishing a functional motor output and we indicate behavior-specific adaptations. Furthermore, we report on the mechanisms underlying coordination between different body parts. Last but not least, by reviewing the state-of-the-art knowledge concerning the role of CPGs in insect locomotion, we endeavor to create a common ground, upon which future research in the field of motor control in insects can build.

The design and development of Branch Bot: a branch-crawling, caterpillar-inspired, soft robot

A soft climbing robot has the potential to access locations such as wiring ducts and tree canopies that are unreachable by humans and traditional rigid robots. In addition, a soft robot is robust and can fall without damaging itself or its environment. We present a soft, branch-crawling robot that is inspired by the passive gripping mechanisms used by caterpillars. The conformability of the robot’s soft body makes it uniquely suited to move in a complex 3D environment. A key innovation is that grip release is actively controlled and coordinated with propulsion generated by stored elastic energy. The robot is molded from silicone rubber and actuated using remote motor-tendons coupled to the structure through Bowden cables. Grip is achieved passively through an elastic flexure that pushes a compliant finger against the dowel. Experimental results show that the gripper is easily able to support the weight of the robot, and that the body structure allows the robot to crawl horizontally, vertically, and along branches. This robot demonstrates some key advantages of a soft robotic platform over traditional rigid robots.

A Fully Three-Dimensional Printed Inchworm-Inspired Soft Robot with Magnetic Actuation

In the field of robotics, researchers are aiming to develop soft or partially soft bodied robots that utilize the motion and control system of various living organisms in nature. These robots have the potential to be robust and versatile, even safer for human interaction compared to traditional rigid robots. Soft robots based on biomimetic principles are being designed for real life applications by paying attention to different shape, geometry, and actuation systems in these organisms that respond to surrounding environments and stimuli. Especially, caterpillars or inchworms have garnered attention due to their soft compliant structure and crawling locomotion system making them ideal for maneuvering in congested spaces as a transport function. Currently, there are two major challenges with design and fabrication of such soft robots: using an efficient actuation system and developing a simple manufacturing process. Different actuation systems have been explored, which include shape memory alloy based coils and hydraulic and pneumatic actuators. However, the intrinsic limitations due to overall size and control system of these actuators prevent their integration in flexibility, lightweight, and compact manner, limiting practical and untethered applications. In comparison, magnetic actuation demonstrates simple wireless noncontact control. In terms of manufacturing process, additive manufacturing has emerged as an effective tool for obtaining structural complexity with high resolution, accuracy, and desired geometry. This study proposes a fully three-dimensional (3D) printed, monolithic, and tetherless inchworm-inspired soft robot that uses magnetic actuation for linear locomotion and crawling. Its structure is multimaterial heterogeneous particle-polymer composite with locally programmed material compositions. This soft robot is directly printed in one piece from a 3D computer model, without any manual assembly or complex processing steps, and it can be controlled by an external wireless force. This article presents its design and manufacturing with the novel magnetic field assisted projection stereolithography technique. Analytical models and numerical simulations of the crawling locomotion of the soft robot are also presented and compared with the experimental results of the 3D printed prototype. The overall locomotion mechanism of the magnetically actuated soft robot is evaluated with friction tests and stride efficiency analysis.

Caterpillar Climbing: Robust, Tension-Based Omni-Directional Locomotion

Animals that must transition from horizontal to inclined or vertical surfaces typically change their locomotion strategy to compensate for the relative shift in gravitational forces. The species that have been studied have stiff articulated skeletons that allow them to redistribute ground reaction forces (GRFs) to control traction. Most also change their stepping patterns to maintain stability as they climb. In contrast, caterpillars, most of which are highly scansorial, soft-bodied, and lack rigid support or joints, can move with the same general kinematics in all orientations. In this study, we measure the GRFs exerted by the abdominal prolegs of Manduca sexta (Linnaeus) during locomotion. We show that, despite the orthogonal shift in gravitational forces, caterpillars use the same tension-based environmental skeleton strategy to crawl horizontally and to climb vertically. Furthermore, the transition from horizontal to vertical surfaces does not seem to require a change in gait; instead gravitational loading is used to help maintain a stance-phase body tension against which the muscles can pull the body upwards.