Anionic ordering in Pb2Ti4O9F2 revisited by nuclear magnetic resonance and density functional theory

A combination of ¹⁹F magic angle spinning (MAS) nuclear magnetic resonance (NMR) and density functional theory (DFT) were used to study the ordering of F atoms in Pb₂Ti₄O₉F₂. This analysis revealed that F atoms predominantly occupy two of the six available inequivalent sites in a ratio of 73 : 27. DFT-based calculations explained the preference of F occupation on these sites and quantitatively reproduced the experimental occupation ratio, independent of the choice of functional. We concluded that the Pb atom's 6s² lone pair may play a role (∼0.1 eV per f.u.) in determining the majority and minority F occupation sites with partial density of states and crystal orbital Hamiltonian population analyses applied to the DFT wave functions.

Strontium Nitridoborate Hydride Sr2BN2H Verified by Single-Crystal X-ray and Neutron Powder Diffraction

Combining different anions in one material allows tuning of its structural, magnetic, and electronic properties. We hereby present the mixed anion compound Sr₂BN₂H, expanding the less-known class of nitridoborate hydrides. Solid-state reaction of Sr₂N, BN, and SrH₂ at 850 °C in a tube furnace yielded a gray, air- and moisture-sensitive powder of Sr₂BN₂H. It crystallizes as colorless platelets in the orthorhombic space group Pnma (no. 62) with a = 9.9164(2), b = 3.9079(1), and c = 10.1723(2) Å and Z = 4. An initial structural model was obtained from single-crystal X-ray diffraction data and corroborated by neutron powder diffraction data of the corresponding deuteride. Further validation by ¹H and ¹¹B MAS NMR, FTIR, and Raman spectroscopy complements the structural proof of anionic hydrogen present in the compound. Quantum chemical calculations support the experimental findings and reveal the electronic structure of Sr₂BN₂H.

Aliovalent anion substitution as a design concept for heteroanionic Ruddlesden–Popper hydrides

Aliovalent anion substitution 2 O2− ⇒ N3− + H− in LiLa2HO3 yields the heteroanionc hydrides LiLa2NH2O and LiLa2N1.5H2.5.

Zero-to-Two Nanoarchitectonics: Fabrication of Two-Dimensional Materials from Zero-Dimensional Fullerene

Nanoarchitectonics of two-dimensional materials from zero-dimensional fullerenes is mainly introduced in this short review. Fullerenes are simple objects with mono-elemental (carbon) composition and zero-dimensional structure. However, fullerenes and their derivatives can create various types of two-dimensional materials. The exemplified approaches demonstrated fabrications of various two-dimensional materials including size-tunable hexagonal fullerene nanosheet, two-dimensional fullerene nano-mesh, van der Waals two-dimensional fullerene solid, fullerene/ferrocene hybrid hexagonal nanosheet, fullerene/cobalt porphyrin hybrid nanosheet, two-dimensional fullerene array in the supramolecular template, two-dimensional van der Waals supramolecular framework, supramolecular fullerene liquid crystal, frustrated layered self-assembly from two-dimensional nanosheet, and hierarchical zero-to-one-to-two dimensional fullerene assembly for cell culture.

Mixed Anion Control of the Partial Oxidation of Methane to Methanol on the β-PtO2 Surface

Although the C-H bond of methane is very strong, it can be easily dissociated on the (110) surface of β-PtO2. This is because a very stable Pt-C bond is formed between the coordinatively unsaturated Pt atom and CH3 on the surface. Owing to the stable nature of the Pt-C bond, CH3 is strongly bound to the surface. When it comes to methanol synthesis from methane, the Pt-C bond has to be cleaved to form a C-O bond during the reaction process. However, this is unlikely to occur on the β-PtO2 surface: The activation energy of the process is calculated to be so large as 47.9 kcal/mol. If the surface can be modified in such a way that the ability for the C-H bond activation is maintained but the Pt-C bond is weakened, a catalyst combining the functions of C-H bond cleavage and C-O bond formation can be created. For this purpose, analyzing the orbital interactions on the surface is found to be very useful, resulting in a prediction that the Pt-C bond can be weakened by replacing the O atom trans to the C atom with a N atom. This would be a sort of process to make β-PtO2 a mixed anion compound. Density functional theory simulations of catalytic reactions on the β-PtO2 surface show that the activation energy of the rate-limiting step of methanol synthesis can be reduced to 27.7 kcal/mol by doping the surface with N.

Progress in Molecular Nanoarchitectonics and Materials Nanoarchitectonics

Although various synthetic methodologies including organic synthesis, polymer chemistry, and materials science are the main contributors to the production of functional materials, the importance of regulation of nanoscale structures for better performance has become clear with recent science and technology developments. Therefore, a new research paradigm to produce functional material systems from nanoscale units has to be created as an advancement of nanoscale science. This task is assigned to an emerging concept, nanoarchitectonics, which aims to produce functional materials and functional structures from nanoscale unit components. This can be done through combining nanotechnology with the other research fields such as organic chemistry, supramolecular chemistry, materials science, and bio-related science. In this review article, the basic-level of nanoarchitectonics is first presented with atom/molecular-level structure formations and conversions from molecular units to functional materials. Then, two typical application-oriented nanoarchitectonics efforts in energy-oriented applications and bio-related applications are discussed. Finally, future directions of the molecular and materials nanoarchitectonics concepts for advancement of functional nanomaterials are briefly discussed.

Na3 SO4 H-The First Representative of the Material Class of Sulfate Hydrides

The first representative of a novel class of mixed-anionic compounds, the sulfate hydride Na3 SO4 H, and the corresponding deuteride Na3 SO4 D were obtained from the solid-state reaction of NaH or NaD with dry Na2 SO4 . Precise reaction control is required, because too harsh conditions lead to the reduction of sulfate to sulfide. A combined X-ray and neutron diffraction study revealed that the compound crystallizes in the tetragonal space group P4/nmm with the lattice parameters a=7.0034(2) Å and c=4.8569(2) Å. The sole presence of hydride and absence of hydroxide ions is proven by vibrational spectroscopy and comparison with spectra predicted from quantum chemical calculations. 1 H and 23 Na MAS NMR spectra are consistent with the structure of Na3 SO4 H: a single 1 H peak at 2.9 ppm is observed, while two peaks at 15.0 and 6.2 ppm for the inequivalent 23 Na sites are observed. Elemental analysis and quantum chemical calculations further support these results.

Controlling the growth of a SiO2 coating on hydrophobic CsPbBr3 nanocrystals towards aqueous transfer and high luminescence

Silica coating can effectively solve the stability issue of lead halide perovskite nanomaterials. However, it is difficult to achieve aqueous SiO₂ coating on hydrophobic CsPbBr₃ nanocrystals (NCs). In this paper, the hydrolysis process of tetramethoxysilane was controlled to get a homogeneous SiO₂ coating or a NC/SiO₂ Janus structure. In step 1, the Cs₄PbBr₆ NCs were silanized using partially hydrolyzed tetramethoxysilane (PH-TMOS). During this process, the Si-OH groups which came from PH-TMOS were absorbed onto the surface of the Cs₄PbBr₆ NCs with the removal of hydrophobic oleic acid (OA) ligands. In step 2, phase transformation from Cs₄PbBr₆ to CsPbBr₃ occurred owing to the injection of water. Meanwhile, further hydrolysis of TMOS took place and generated cross-linked Si-O-Si. Because the silanization in step 1 created lots of growth sites, the condensation of SiO₂ was not limited to the interface between water and hexane. After growing for 12 h, the fully covered CsPbBr₃@SiO₂ capsules were prepared. The anion exchange reactions of the CsPbBr₃@SiO₂ capsules were studied. Only one even and symmetric PL peak was apparent during the anion exchange process, which was different from the bare CsPbBr₃ NCs. This result demonstrated that the SiO₂ shell can act as a buffer layer to block the direct contact of CsPbBr₃ with the excess PbBr₂ precursor in solution. Compared with the CsPbBr₃ NCs, CsPbBr₃@SiO₂ showed better stability in polar solvent and air. A bright green emission was also observed under UV light after 90 days. The successful preparation of CsPbBr₃@SiO₂ capsules with enhanced stability paves the way for the further development of lead halide perovskite nanomaterials.

Borate Hydrides as a New Material Class: Structure, Computational Studies, and Spectroscopic Investigations on Sr5 (BO3 )3 H and Sr5 (11 BO3 )3 D

The unprecedented borate hydride Sr5 (BO3 )3 H and deuteride Sr5 (11 BO3 )3 D crystallizing in an apatite-related structure are reported. Despite the presence of hydride anions, the compound decomposes only slowly in air. Doped with Eu2+ , it shows broad-band orange-red emission under violet excitation owing to the 4f6 5d-4f7 transition of Eu2+ . The observed 1 H NMR chemical shift is in good agreement with previously reported 1 H chemical shifts of ionic metal hydrides as well as with quantum chemical calculations and very different from 1 H chemical shifts usually found for hydroxide ions in similar materials. FTIR and Raman spectroscopy of different samples containing 1 H, 2 H, nat B, and 11 B combined with calculations unambiguously prove the absence of hydroxide ions and the sole incorporation of hydride ions into the borate. The orange-red emission obtained by doping with Eu2+ shows that the new compound class might be a promising host material for optical applications.

Charge-Separation-Type Ionic Crystals with Mixed AuI4CoIII2 and AuI4NiIICoIII Hexanuclear Complexes

Treatment of a digold(I) metalloligand, [Au^I₂(dppe)(d-Hpen)₂] (H₂L^Au; d-H₂pen = d-penicillamine, dppe = 1,2-bis(diphenylphosphino)ethane), with a 1:1 mixture of Co(OAc)₂ and Ni(OAc)₂ under aerobic conditions resulted in the formation of three types of hexanuclear complexes: [Co^III₂(L^Au)₂]²⁺, [Ni^IICo^III(L^Au)₂]⁺, and [Ni^II₂(L^Au)₂]. The addition of NaNO₃, M¹NO₃ (M¹ = K, Rb, Cs), and M²(NO₃)₂ (M² = Ca, Sr, Ba) to the reaction mixture led to co-crystallization of [Co^III₂(L^Au)₂]²⁺ and [Ni^IICo^III(L^Au)₂]⁺ as a solid solution to form the charge-separation (CS)-type ionic crystals 1_Na, 1_M1, and 1_M2, respectively, while [Ni^II₂(L^Au)₂] independently crystallized as a single species (2). In 1_Na, [Co^III₂(L^Au)₂]²⁺ and [Ni^IICo^III(L^Au)₂]⁺ cations assemble in a 1:2 ratio to form a cationic supramolecular octahedron accommodating 4 H₃O⁺ ions, while 10 nitrate ions are packed in each hydrophilic tetrahedral interstice of the crystal to form an anionic adamantane cluster. The overall structures of 1_M1 and 1_M2 are very similar to that of 1_Na, having a CS-type structure composed of cationic supramolecular octahedra with a +12 charge and anionic inorganic clusters with a -10 charge. However, 1_M1 contains M¹ ions in place of the H₃O⁺ ions in 1_Na, and furthermore, a novel rhombic dodecahedron cluster composed of 14 nitrate ions, which encapsulates two M² ions, is formed in each hydrophilic tetrahedral interstice in 1_M2.

Nanoarchitectonics of Nanoporous Carbon Materials in Supercapacitors Applications

High surface area and large pore volume carbon materials having hierarchical nanoporous structure are required in high performance supercapacitors. Such nanoporous carbon materials can be fabricated from organic precursors with high carbon content, such as synthetic biomass or agricultural wastes containing cellulose, hemicellulose, and lignin. Using recently developed unique concept of materials nanoarchitectonics, high performance porous carbons with controllable surface area, pore size distribution, and hierarchy in nanoporous structure can be fabricated. In this review, we will overview the recent trends and advancements on the synthetic methods for the production of hierarchical porous carbons with one- to three-dimensional network structure with superior performance in supercapacitors applications. We highlight the promising scope of accessing nanoporous graphitic carbon materials from: (i) direct conversion of single crystalline self-assembled fullerene nanomaterials and metal organic frameworks, (ii) hard- and soft-templating routes, and (iii) the direct carbonization and/or activation of biomass or agricultural wastes as non-templating routes. We discuss the appealing points of the different synthetic carbon sources and natural precursor raw-materials derived nanoporous carbon materials in supercapacitors applications.