Optimization and Enhancement of the Peroxidase-like Activity of Hemin in Aqueous Solutions of Sodium Dodecylsulfate

Iron porphyrins play several important roles in present-day living systems and probably already existed in very early life forms. Hemin (= ferric protoporphyrin IX = ferric heme b), for example, is the prosthetic group at the active site of heme peroxidases, catalyzing the oxidation of a number of different types of reducing substrates after hemin is first oxidized by hydrogen peroxide as the oxidizing substrate of the enzyme. The active site of heme peroxidases consists of a hydrophobic pocket in which hemin is embedded noncovalently and kept in place through coordination of the iron atom to a proximal histidine side chain of the protein. It is this partially hydrophobic local environment of the enzyme which determines the efficiency with which the sequential reactions of the oxidizing and reducing substrates proceed at the active site. Free hemin, which has been separated from the protein moiety of heme peroxidases, is known to aggregate in an aqueous solution and exhibits low catalytic activity. Based on previous reports on the use of surfactant micelles to solubilize free hemin in a nonaggregated state, the peroxidase-like activity of hemin in the presence of sodium dodecyl sulfate (SDS) at concentrations below and above the critical concentration for SDS micelle formation (critical micellization concentration (cmc)) was systematically investigated. In most experiments, 3,3',5,5'-tetramethylbenzidine (TMB) was applied as a reducing substrate at pH = 7.2. The presence of SDS clearly had a positive effect on the reaction in terms of initial reaction rate and reaction yield, even at concentrations below the cmc. The highest activity correlated with the cmc value, as demonstrated for reactions at three different HEPES concentrations. The 4-(2-hydroxyethyl)-1-piperazineethanesulfonate salt (HEPES) served as a pH buffer substance and also had an accelerating effect on the reaction. At the cmc, the addition of l-histidine (l-His) resulted in a further concentration-dependent increase in the peroxidase-like activity of hemin until a maximal effect was reached at an optimal l-His concentration, probably corresponding to an ideal mono-l-His ligation to hemin. Some of the results obtained can be understood on the basis of molecular dynamics simulations, which indicated the existence of intermolecular interactions between hemin and HEPES and between hemin and SDS. Preliminary experiments with SDS/dodecanol vesicles at pH = 7.2 showed that in the presence of the vesicles, hemin exhibited similar peroxidase-like activity as in the case of SDS micelles. This supports the hypothesis that micelle- or vesicle-associated ferric or ferrous iron porphyrins may have played a role as primitive catalysts in membranous prebiotic compartment systems before cellular life emerged.

Ferric heme b in aqueous micellar and vesicular systems: state-of-the-art and challenges

Ferric heme b (= ferric protoporphyrin IX = hemin) is an important prosthetic group of different types of enzymes, including the intensively investigated and widely applied horseradish peroxidase (HRP). In HRP, hemin is present in monomeric form in a hydrophobic pocket containing among other amino acid side chains the two imidazoyl groups of His170 and His42. Both amino acids are important for the peroxidase activity of HRP as an axial ligand of hemin (proximal His170) and as an acid/base catalyst (distal His42). A key feature of the peroxidase mechanism of HRP is the initial formation of compound I under heterolytic cleavage of added hydrogen peroxide as a terminal oxidant. Investigations of free hemin dispersed in aqueous solution showed that different types of hemin dimers can form, depending on the experimental conditions, possibly resulting in hemin crystallization. Although it has been recognized already in the 1970s that hemin aggregation can be prevented in aqueous solution by using micelle-forming amphiphiles, it remains a challenge to prepare hemin-containing micellar and vesicular systems with peroxidase-like activities. Such systems are of interest as cheap HRP-mimicking catalysts for analytical and synthetic applications. Some of the key concepts on which research in this fascinating and interdisciplinary field is based are summarized, along with major accomplishments and possible directions for further improvement. A systematic analysis of the physico-chemical properties of hemin in aqueous micellar solutions and vesicular dispersions must be combined with a reliable evaluation of its catalytic activity. Future studies should show how well the molecular complexity around hemin in HRP can be mimicked by using micelles or vesicles. Because of the importance of heme b in virtually all biological systems and the fact that porphyrins and hemes can be obtained under potentially prebiotic conditions, ideas exist about the possible role of heme-containing micellar and vesicular systems in prebiotic times.

Enzyme-Mimicking Materials from Designed Self-Assembly of Lysine-Rich Peptides and G-Quadruplex DNA/Hemin DNAzyme: Charge Effect of the Key Residues on the Catalytic Functions

In enzymatic active sites, the essential functional groups are spatially arranged as a result of the enzyme three-dimensional folding, which leads to remarkable catalytic properties. We are inspired to self-assemble the polylysine peptides with guanine-rich DNA and hemin as cofactor to fabricate the peroxidase-mimicking catalytic nanomaterials. The DNA can fold into G-quadruplex to provide a supramolecular scaffold and a nucleobase for supporting and coordinating hemin, and the polylysine provides amine as distal groups to promote the H₂O₂ adsorption to the iron of hemin. The polylysine and DNA components synergistically accelerated the hemin-catalyzed reactions, and the complex containing ε-polylysine exhibited higher activity than α-polylysine. This activity difference is attributed to the higher pK_a value and more susceptible protonation of amine of ε-polylysine than α-polylysine. The ε-polylysine/DNA/hemin had similar coordination states of hemin and conformations of the components to α-polylysine/DNA/hemin but accelerated the formation of the intermediate compound I faster than α-polylysine. Theoretical simulation reveals that the unprotonated NH₂ behaved like a base catalyst, similar to His-42 residue in the natural heme pocket, while the protonated NH₃⁺ acted as an acid, which indicated that the base catalyst on the distal side of the hemin pocket is more active than the acid. This work provides an avenue to control the distribution of the catalytic residues in an enzyme-like active site and to understand the roles of the key residues of native enzymes.

Nature of a H2O Molecule Confined in the Hydrophobic Interface between the Heme and G-Quartet Planes in a Heme-DNA Complex

Heme binds selectively to the 3'-terminal G-quartet of all parallel G-quadruplex DNAs to form stable heme-DNA complexes. Interestingly, the heme-DNA complexes exhibit various spectroscopic and functional properties similar to those of hemoproteins. Since the nature of the axial ligands is crucial in determining the physicochemical properties of heme, identification and characterization of the axial ligands in a heme-DNA complex are essential to elucidate the structure-function relationship in the complex. NMR studies of a complex possessing a low-spin ferric heme with a water molecule (H₂O) and cyanide ion (CN^-) as the axial ligands allowed detailed characterization of the physicochemical nature of the axial H₂O ligand. We found that the in-plane asymmetry of the heme electronic structure of the complex is not largely affected by the axial H₂O coordination, indicating that the H₂O confined in the hydrophobic interface between the heme and G-quartet planes of the complex rotates about the coordination bond with respect to the heme. The effect of the hydrogen(H)/deuterium(D) isotope replacement of the axial H₂O on the heme electronic structure was manifested in the isotope shifts of paramagnetically shifted heme methyl proton signals of the complex in such a manner that three resolved peaks associated with axial H₂O, HDO, and D₂O were observed for each of the heme methyl proton signals. These findings provide not only the basis for an understanding of the nature of the unique axial H₂O but also an insight into the molecular mechanism responsible for the control of the heme reactivity in the heme-DNA complex.

A cationic copolymer as a cocatalyst for a peroxidase-mimicking heme-DNAzyme

Heme binds to a parallel-stranded G-quadruplex DNA to form a peroxidase-mimicking heme-DNAzyme. An interpolyelectrolyte complex between the heme-DNAzyme and a cationic copolymer possessing protonated amino groups was characterized and the peroxidase activity of the complex was evaluated to elucidate the effect of the polymer on the catalytic activity of the heme-DNAzyme. We found that the catalytic activity of the heme-DNAzyme is enhanced through the formation of the interpolyelectrolyte complex due to the general acid catalysis of protonated amino groups of the polymer, enhancing the formation of the iron(iv)oxo porphyrin π-cation radical intermediate known as Compound I. This finding indicates that the polymer with protonated amino groups can act as a cocatalyst for the heme-DNAzyme in the oxidation catalysis. We also found that the enhancement of the activity of the heme-DNAzyme by the polymer depends on the local heme environment such as the negative charge density in the proximity of the heme and substrate accessibility to the heme. These findings provide novel insights as to molecular design of the heme-DNAzyme for enhancing its catalytic activity.

Effects of Heme Electronic Structure and Local Heme Environment on Catalytic Activity of a Peroxidase-Mimicking Heme-DNAzyme

The catalytic cycle of a peroxidase-mimicking heme-DNAzyme involves an iron(IV)oxo porphyrin π-cation radical intermediate known as compound I formed through heterolytic O-O bond cleavage of an Fe³⁺-bound hydroperoxo ligand (Fe-OOH) in compound 0, like that of a heme enzyme such as horseradish peroxidase (HRP). Peroxidase assaying of complexes composed of chemically modified hemes possessing various electron densities of the heme iron atom (ρ_Fe) and parallel-stranded tetrameric G-quadruplex DNAs of oligonucleotides d(TTAGGG), d(TTAGGGT), and d(TTAGGGA) was performed to elucidate the effects of the heme electronic structure and local heme environment on the catalytic activity of the heme-DNAzyme. The study revealed that the DNAzyme activity is enhanced through an increase in the ρ_Fe and general base catalysis of the adenine base adjacent to the heme, which are reminiscent of the "push" and "pull" mechanisms in the catalytic cycle of HRP, respectively, and that the activity of the heme-DNAzyme can be independently controlled through the heme electronic structure and local heme environment. These findings allow a deeper understanding of the structure-function relationship of the peroxidase-mimicking heme-DNAzyme.

Endonuclease IV-Regulated DNAzyme Motor for Universal Single-nucleotide Variation Discrimination

Single-nucleotide variation (SNV) detection plays significant roles in disease diagnosis and treatment. Generally, auxiliary probe, restricted design rules, complicated detection system, and repeated experimental parameter optimization are needed to obtain satisfactory tradeoff between sensitivity and selectivity for SNV discrimination, especially when different mutant sites need to be distinguished. To overcome these limitations, we developed a universal, straightforward, and relatively cheap SNV discrimination strategy, which simultaneously possessed high sensitivity and selectivity. The excellent performance of this strategy was ascribed to the SNV discrimination property of endonuclease IV (Endo IV) and the different hydrolysis behavior between free deoxyribozyme (DNAzyme) and the trapped DNAzyme to the substrates modified on gold nanoparticles (AuNPs). When Endo IV recognized the mutant-type target (MT), free DNAzyme was released from the probe, and the DNAzyme motor was activated with the help of cofactor Mn²⁺ to generate an amplified fluorescence signal. On the contrary, the wild-type target (WT) could not effectively trigger the DNAzyme motor. Moreover, for different SNV types, the corresponding probe could be designed by simply changing the sequence hybridized with the target and retaining the DNAzyme sequence. Thus, the fluorescence signal generation system does not need to change for different SNV targets. Five clinical-related SNVs were determined with the limit of detection (LOD) ranging from 0.01 to 0.05%, which exhibited competitive sensitivity over existing SNV detection methods. This strategy provided another insight into the properties of Endo IV and DNAzyme, expanded the applications of DNAzyme motor, and has great potential to be used for precision medicine.

A heme•DNAzyme activated by hydrogen peroxide catalytically oxidizes thioethers by direct oxygen atom transfer rather than by a Compound I-like intermediate

Hemin [Fe(III)-protoporphyrin IX] is known to bind tightly to single-stranded DNA and RNA molecules that fold into G-quadruplexes (GQ). Such complexes are strongly activated for oxidative catalysis. These heme•DNAzymes and ribozymes have found broad utility in bioanalytical and medicinal chemistry and have also been shown to occur within living cells. However, how a GQ is able to activate hemin is poorly understood. Herein, we report fast kinetic measurements (using stopped-flow UV-vis spectrophotometry) to identify the H2O2-generated activated heme species within a heme•DNAzyme that is active for the oxidation of a thioether substrate, dibenzothiophene (DBT). Singular value decomposition and global fitting analysis was used to analyze the kinetic data, with the results being consistent with the heme•DNAzyme's DBT oxidation being catalyzed by the initial Fe(III)heme-H2O2 complex. Such a complex has been predicted computationally to be a powerful oxidant for thioether substrates. In the heme•DNAzyme, the DNA GQ enhances both the kinetics of formation of the active intermediate as well as the oxidation step of DBT by the active intermediate. We show, using both stopped flow spectrophotometry and EPR measurements, that a classic Compound I is not observable during the catalytic cycle for thioether sulfoxidation.

Insights into G-Quadruplex-Hemin Dynamics Using Atomistic Simulations: Implications for Reactivity and Folding

Guanine quadruplex nucleic acids (G4s) are involved in key biological processes such as replication or transcription. Beyond their biological relevance, G4s find applications as biotechnological tools since they readily bind hemin and enhance its peroxidase activity, creating a G4-DNAzyme. The biocatalytic properties of G4-DNAzymes have been thoroughly studied and used for biosensing purposes. Despite hundreds of applications and massive experimental efforts, the atomistic details of the reaction mechanism remain unclear. To help select between the different hypotheses currently under investigation, we use extended explicit-solvent molecular dynamics (MD) simulations to scrutinize the G4/hemin interaction. We find that besides the dominant conformation in which hemin is stacked atop the external G-quartets, hemin can also transiently bind to the loops and be brought to the external G-quartets through diverse delivery mechanisms. The simulations do not support the catalytic mechanism relying on a wobbling guanine. Similarly, the catalytic role of the iron-bound water molecule is not in line with our results; however, given the simulation limitations, this observation should be considered with some caution. The simulations rather suggest tentative mechanisms in which the external G-quartet itself could be responsible for the unique H₂O₂-promoted biocatalytic properties of the G4/hemin complexes. Once stacked atop a terminal G-quartet, hemin rotates about its vertical axis while readily sampling shifted geometries where the iron transiently contacts oxygen atoms of the adjacent G-quartet. This dynamics is not apparent from the ensemble-averaged structure. We also visualize transient interactions between the stacked hemin and the G4 loops. Finally, we investigated interactions between hemin and on-pathway folding intermediates of the parallel-stranded G4 fold. The simulations suggest that hemin drives the folding of parallel-stranded G4s from slip-stranded intermediates, acting as a G4 chaperone. Limitations of the MD technique are briefly discussed.

Structural and functional characterization of complexes between heme and dimeric parallel G-quadruplex DNAs

Heme has been receiving considerable interest as a prosthetic group of ribozymes and deoxyribozymes, because heme-bound nucleic acids exhibit peroxidase-like catalytic activities (Travascio, P., Li, Y., and Sen, D. (1998) Chem. Biol, 5, 505-517). The interaction of heme with dimeric G-quadruplexes formed from d(TAGGGTTAGGGT) and d(TAGGGTTAGGGA) has been characterized to gain a deeper understanding of the molecular recognition of G-quadruplex DNAs by heme. We found that heme binds selectively to the 3'-terminal G-quartet of a dimeric parallel G-quadruplex of d(TAGGGTTAGGGT), whereas binding of heme to a dimeric antiparallel G-quadruplex of d(TAGGGTTAGGGA) does not occur, suggesting that an orderly arrangement of the constituent guanine deoxyribose rings, with respect to the G-quartet plane, is crucial for the binding of heme to the DNA. The preferential binding of heme to the 3'-terminal G-quartet of parallel G-quadruplex DNAs allowed a systematic modification of the heme environment in the complex through the DNA sequence. The activity of the complexes was found to increase with increasing number of adenine bases adjacent to the heme in the complexes, possibly due to improvement of the accessibility of aromatic substrate, i.e., 10-acetyl-3,7-dihydroxyphenoxazine, to the heme, and an increase in the frequency of appearance of a specific orientation of the adenine bases, with respect to the heme, optimized for its activity as an acid-base catalyst to enhance the peroxidase activity of the complex.