Synchrotron Radiation Based X-ray Absorption Spectroscopy: Fundamentals and Applications in Photocatalysis

Photocatalysis is one of the most promising green technologies to utilize solar energy for clean energy achievement and environmental governance. There is a knotty problem to rational designing high-performance photocatalyst, which largely depends on an in-depth insight into their structure-activity relationships and complex photocatalytic reaction mechanisms. Synchrotron radiation based X-ray absorption spectroscopy (XAS) is an important characterization method for photocatlayst to offer the element-specific key geometric and electronic structural information at the atomic level, on this basis, time-resolved XAS technique has a huge impact on mechanistic understanding of photochemical reaction owing to their powerful ability to probe, in real-time, the electronic and geometric structures evolution within photocatalysis reactions. This review will focus on the fundamentals of XAS and their applications in photocatalysis. The detailed applications obtained from XAS is described through the following aspects: 1) identifying local structure of photocatalyst; 2) uncovering in situ structure and chemical state evolution during photocatalysis; 3) revealing the photoexcited process. We will provide an in depth understanding on how the XAS method can guide the rational design of highly efficient photocatalyst. Finally, a systematic summary of XAS and related significance is made and the research perspectives are suggested.

Advances in the Electrocatalytic Hydrogen Evolution Reaction by Metal Nanoclusters-based Materials

With the development of renewable energy systems, clean hydrogen is burgeoning as an optimal alternative to fossil fuels, in which its application is promising to retarding the global energy and environmental crisis. The hydrogen evolution reaction (HER), capable of producing high-purity hydrogen rapidly in electrocatalytic water splitting, has received much attention. Abundant research about HER has been done, focusing on advanced electrocatalyst design with high efficiency and robust stability. As potential HER catalysts, metal nanoclusters (MNCs) have been studied extensively. They are composed of several to a hundred metal atoms, with sizes being comparable to the Fermi wavelength of electrons, that is, < 2.0 nm. Different from metal atoms/nanoparticles, they exhibit unique catalytic properties due to their quantum size effect and low-coordination environment. In this review, the activity-enhancing approaches of MNCs applied in HER electrocatalysis are mainly summarized. Furthermore, recent progress in MNCs classified with different stabilization strategies, that is, the freestanding MNCs, MNCs with organic, metal and carbon supports, are introduced. Finally, the current challenges and deficiencies of these MNCs for HER are prospected.

Fabrication of VO Nanorings on a Porous Carbon Architecture for High-Performance Li-Ion Batteries

Vanadium monoxide (VO) is a promising candidate as an anode for lithium-ion batteries due to its high theoretical capacity, low cost, and considerable electronic conductivity. Unfortunately, a large volume change during electrochemical processes obstructs its practical application. In this work, a composite of VO nanorings grown on a porous carbon architecture is prepared via a topochemical self-reduction approach. When used as an anode for lithium-ion batteries, improved redox kinetics from enhanced electronic conduction and the corresponding fast lithium-ion diffusion is observed to greatly promote the electrochemical performance of lithium-ion batteries. The resulting composite delivered a reversible capacity of 336 mA h g^-1 after 400 cycles at 10 A g^-1 with a capacity retention of 85%, owing to the synergistic effect of VO nanorings and porous carbon in alleviating volume changes that result in a long-term cycling ability at a high current density. At 20 A g^-1, the composite anode exhibited a rate capability of 235 mA h g^-1, superior to all VO-based electrodes reported in the literature. Furthermore, a full cell was first fabricated by employing VO@C-2 as the anode and LiFePO₄ as the cathode, which exhibited a capacity of 213 mA h g^-1 after 100 cycles at 0.1 A g^-1, indicating the potential of VO as an anode for practical application.

Influence of Phosphorus Doping on Triazole-Based g-C3N5 Nanosheets for Enhanced Photoelectrochemical and Photocatalytic Performance

Triazole-based g-C₃N₅, a potential catalyst, has received little attention over the years. We prepared phosphorus-doped g-C₃N₅ with one triazole and two triazine units for the first time to investigate its photoelectrochemical (PEC) and photocatalytic properties. The doping states and crystalline structures of the samples were determined using X-ray techniques, namely, X-ray diffraction, X-ray photoelectron spectroscopy, and X-ray absorption fine structure analysis. Our results suggested that the phosphorus was substituted into carbon sites form P-N/P═N bonds with four coordination, which contribute P 2p level donor states in the band gap to enhance light absorption and reduce charge separation. Therefore, P-doped g-C₃N₅ exhibited higher PEC current density and better photocatalytic efficiency toward the degradation of rhodamine B dye or tetracycline under light irradiation compared to the undoped g-C₃N₅ sample. However, excess phosphorus doping resulted in the formation of impurities and disrupted the triazine and triazole units, reducing the PEC and photocatalytic efficiency. In summary, P-doped g-C₃N₅ was successfully prepared in the present study and represents a promising, facile, and effective catalyst for energy applications and environmental remediation.

Dual Ag/Co cocatalyst synergism for the highly effective photocatalytic conversion of CO2 by H2O over Al-SrTiO3

Loading Ag and Co dual cocatalysts on Al-doped SrTiO₃ (AgCo/Al-SrTiO₃) led to a significantly improved CO-formation rate and extremely high selectivity toward CO evolution (99.8%) using H₂O as an electron donor when irradiated with light at wavelengths above 300 nm. Furthermore, the CO-formation rate over AgCo/Al-SrTiO₃ (52.7 μmol h⁻¹) was a dozen times higher than that over Ag/Al-SrTiO₃ (4.7 μmol h⁻¹). The apparent quantum efficiency for CO evolution over AgCo/Al-SrTiO₃ was about 0.03% when photoirradiated at a wavelength at 365 nm, with a CO-evolution selectivity of 98.6% (7.4 μmol h⁻¹). The Ag and Co cocatalysts were found to function as reduction and oxidation sites for promoting the generation of CO and O₂, respectively, on the Al-SrTiO₃ surface.

Deposition Ag and Co dual cocatalysts onto Al-SrTiO₃ significantly improves its activity for photoreduction of CO₂ by H₂O, with extremely high selectivity to CO evolution (99.8%), in which Ag and Co enable CO₂ reduction and H₂O oxidation, respectively.

Improvement in Cobalt Phosphate Electrocatalyst Activity toward Oxygen Evolution from Water by Glycine Molecule Addition and Functional Details

Electrochemical water splitting using renewable energy shows promise for the development of sustainable hydrogen production methods. The process requires a highly active electrocatalyst for oxygen evolution to improve the overall water splitting efficiency. The present study showed that oxygen evolution improved dramatically upon the addition of glycine to cobalt phosphate, when the glycine was added to the electrolyte solution during electrodeposition. The functionality of the organic molecules was investigated using in situ UV-vis absorption, in situ X-ray absorption fine structure, and in situ infrared (IR) absorption spectroscopy in the attenuated total reflection mode. The results demonstrated that the glycine molecules assembled cobalt oxide clusters composed of CoO₆ (CoOOH) octahedrons a few nanometers in diameter upon the electrodeposition of cobalt catalysts. This suggests that the cobalt-glycine catalyst can decompose water to oxygen gas efficiently, because the number of cobalt oxide clusters increased as active reaction sites upon the addition of glycine molecules.

Solid energy calibration standards for P K-edge XANES: electronic structure analysis of PPh4Br

P K-edge X-ray absorption near-edge structure (XANES) spectroscopy is a powerful method for analyzing the electronic structure of organic and inorganic phosphorus compounds. Like all XANES experiments, P K-edge XANES requires well defined and readily accessible calibration standards for energy referencing so that spectra collected at different beamlines or under different conditions can be compared. This is especially true for ligand K-edge X-ray absorption spectroscopy, which has well established energy calibration standards for Cl (Cs₂CuCl₄) and S (Na₂S₂O₃·5H₂O), but not neighboring P. This paper presents a review of common P K-edge XANES energy calibration standards and analysis of PPh₄Br as a potential alternative. The P K-edge XANES region of commercially available PPh₄Br revealed a single, highly resolved pre-edge feature with a maximum at 2146.96 eV. PPh₄Br also showed no evidence of photodecomposition when repeatedly scanned over the course of several days. In contrast, we found that PPh₃ rapidly decomposes under identical conditions. Density functional theory calculations performed on PPh₃ and PPh₄⁺ revealed large differences in the molecular orbital energies that were ascribed to differences in the phosphorus oxidation state (III versus V) and molecular charge (neutral versus +1). Time-dependent density functional theory calculations corroborated the experimental data and allowed the spectral features to be assigned. The first pre-edge feature in the P K-edge XANES spectrum of PPh₄Br was assigned to P 1s → P-C π* transitions, whereas those at higher energy were P 1s → P-C σ*. Overall, the analysis suggests that PPh₄Br is an excellent alternative to other solid energy calibration standards commonly used in P K-edge XANES experiments.