A thermocouple system for continuous thermometry in radiofrequency hyperthermia

Specific absorption rate and tissue temperature in local hyperthermia

Specific absorption rate (SAR) and tissue temperature were measured for a total of 83 treatments in 33 patients who received local hyperthermia treatment for cancer. The patients were grouped into three categories according to tumor size. Hyperthermia was induced by 13.56 MHz electromagnetic energy applied using capacitive coupling. A method is described for evaluating SAR from the tissue temperature traces at any time in the treatment when a step change is made in applied power. The method is possible only if the temperature traces are free from interference and the total power delivered to the patient is monitored. Mean values of SAR ranged from 4.6 to 89 W kg-1 depending on the treatment site. Satisfactory heating was achieved for superficial tumors, with temperatures greater than 42 degrees C being recorded in 69% of treatments. For axillary nodes only 4% of treatments exceeded 42 degrees C. For cervix tumors an idealized tumor model was used to estimate tumor temperature from the temperature and SAR measured in the adjacent normal tissue. From the model it appears necessary either to raise the systemic temperature to 40 degrees C or to increase the SAR by at least a factor of 4 to obtain a temperature of 42 degrees C in a typical tumor. Measurements of SAR and temperature are essential for feedback control of computer models which, in principle, could provide a complete distribution of temperature during a hyperthermia treatment. Furthermore, measured SAR provides a direct comparison of the power deposition from different treatment machines in a clinical environment. The data presented form a basis for comparison with the clinical use of other heating systems.

The practical use of thermocouples for temperature measurement in clinical hyperthermia

The use of thermocouples as invasive thermometers in clinical hyperthermia is comprehensively and critically reviewed. The ability to construct thermocouple probes as small-bore, multiple junction assemblies is a major reason for their popularity and full constructional details are given. The potential sources of measurement error when using thermocouples both in temperature gradients and in electromagnetic or ultrasonic heating fields are discussed. Emphasis is placed upon simple practical solutions to these problems and a combination of good measurement practice and electrical filtering can reduce errors to an insignificant level. Techniques are suggested for the assessment of thermocouple performance during clinical measurement. With careful use, thermocouples can be reliable and convenient thermometers.