Influence of Mg2+ on the conformational flexibility of a tetracycline aptamer

Simultaneous Localization of Two High Affinity Divalent Metal Ion Binding Sites in the Tetracycline RNA Aptamer with Mn2+-Based Pulsed Dipolar EPR Spectroscopy

Mg2+ ions play an essential part in stabilizing the tertiary structure of nucleic acids. While the importance of these ions is well documented, their localization and elucidation of their role in the structure and dynamics of nucleic acids are often challenging. In this work, pulsed electron-electron double resonance spectroscopy (PELDOR, also known as DEER) was used to localize two high affinity divalent metal ion binding sites in the tetracycline RNA aptamer with high accuracy. For this purpose, the aptamer was labeled at different positions with a semirigid nitroxide spin label and diamagnetic Mg2+ was replaced with paramagnetic Mn2+, which did not alter the folding process or ligand binding. Out of the several divalent metal ion binding sites that are known from the crystal structure, two binding sites with high affinity were detected: one that is located at the ligand binding center and another at the J1/2 junction of the RNA.

Theoretical analysis of divalent cation effects on aptamer recognition of neurotransmitter targets

Aptamer-based sensing of small molecules such as dopamine and serotonin in the brain, requires characterization of the specific aptamer sequences in solutions mimicking the in vivo environment with physiological ionic concentrations. In particular, divalent cations (Mg2+ and Ca2+) present in brain fluid, have been shown to affect the conformational dynamics of aptamers upon target recognition. Thus, for biosensors that transduce aptamer structure switching as the signal response, it is critical to interrogate the influence of divalent cations on each unique aptamer sequence. Herein, we demonstrate the potential of molecular dynamics (MD) simulations to predict the behaviour of dopamine and serotonin aptamers on sensor surfaces. The simulations enable molecular-level visualization of aptamer conformational changes that, in some cases, are significantly influenced by divalent cations. The correlations of theoretical simulations with experimental findings validate the potential for MD simulations to predict aptamer-specific behaviors on biosensors.

Magnesium Ion-Driven Folding and Conformational Switching Kinetics of Tetracycline Binding Aptamer: Implications for in vivo Riboswitch Engineering

Engineering in vitro selected RNA aptamers into in vivo functional riboswitches represents a long-standing challenge in molecular biology. The highly specific aptamer domain of the riboswitch undergoes a conformational adjustment in response to ligand sensing, which in turn exerts the regulatory function. Besides essential factors like structural complexity and ligand binding kinetics, the active role of magnesium ions in stabilizing RNA tertiary structures and assisting in ligand binding can be a vital criterion. We present spectroscopic studies on the magnesium ion-driven folding of the Tetracycline binding aptamer. Using fluorescent labels, the aptamer pre-folding and subsequent ligand binding is monitored by magnesium titration experiments and time-resolved stopped-flow measurements. A minimum concentration of 0.5 mM magnesium is required to fold into a magnesium ion-stabilized binding-competent state with a preformed binding pocket. Tetracycline binding causes a pronounced conformational change that results in the establishment of the triple helix core motif, and that further propagates towards the closing stem. By a dynamic acquisition of magnesium ions, a kink motif is formed at the intersection of the triple helix and closing stem regions. This ultimately entails a stabilization of the closing stem which is discussed as a key element in the regulatory function of the Tetracycline aptamer.

Development of silver nanoparticles and aptamer conjugated biosensor for rapid detection of E. coli in a water sample

A simple, rapid, and sensitive electrochemical biosensor based on a screen-printed carbon electrode (SPCE) was developed for onsite detection of E. coli in real time. This work analyzed the effect of aptamer conjugation and PBS buffer solution on the colloidal stability of the silver nanoparticles (AgNPs). Aggregations of the AgNPs after aptamer conjugation in PBS buffer were observed from the particle size distribution analysis. The AgNP-aptamer conjugation and its affinity towards E. coli (DH5α) were confirmed by UV-visible spectrophotometry, which showed a linear increment in the absorption with increasing E.coli concentration. The screen-printed carbon electrodes were modified by drop-casting of AgNPs, which were used as an effective immobilization platform for E. coli-specific aptamers. The modified electrode's surface modification and redox behavior were characterized using cyclic voltammetry. Finally, E. coli was detected using differential pulse voltammetry with an optimized incubation time of 15 min. The developed biosensors showed a linear decrease in current intensity with an increase in the concentration of E. coli. The biosensor had a relative standard deviation (RSD) of 6.91% (n = 3), which showed good reproducibility. The developed biosensors are highly sensitive and have a limit of detection (LOD) as low as 150 CFU/ml. The biosensor showed good selectivity for E.coli coli when comparing the signal response obtained for bacteria other than E.coli. Also, the biosensor was found stable for four weeks at room temperature and showed high recoveries from 95.27% to 107% during the tap water sensitivity validation.

A review on recent advances in methods for site-directed spin labeling of long RNAs

RNAs are important biomolecules that play essential roles in various cellular processes and are crucially linked with many human diseases. The key to elucidate the mechanisms underlying their biological functions and develop RNA-based therapeutics is to investigate RNA structure and dynamics and their connections to function in detail using a variety of approaches. Magnetic resonance techniques including paramagnetic nuclear magnetic resonance (NMR) and electron magnetic resonance (EPR) spectroscopies have proved to be powerful tools to gain insights into such properties. The prerequisites for paramagnetic NMR and EPR studies on RNAs are to achieve site-specific spin labeling of the intrinsically diamagnetic RNAs, which however is not trivial, especially for long ones. In this review, we present some covalent labeling strategies that allow site-specific introduction of electron spins to long RNAs. Generally, these strategies include assembly of long RNAs via enzymatic ligation of short oligonucleotides, co- and post-transcriptional site-specific labeling empowered with the unnatural base pair system, and direct enzymatic functionalization of natural RNAs. We introduce a few case studies to discuss the advantages and limitations of each strategy, and to provide a vision for the future development.

Thermal treatment affects aptamers' structural profiles

Using anion-exchange high performance liquid chromatography under non-denaturing conditions, the conformational flexibility of adenosine-, ampicillin-, and quinine aptamers were studied. It was found that all three aptamers showed more than one species when not subjected to thermal anneal. Addition of ligand to untreated aptamers did not significantly change the structural distribution. Upon heating followed by slow cooling, however, all three aptamers were found to exist virtually solely in one structure, presumably the partial hairpin species. It was also found that sonication of quinine aptamer, but not adenosine and ampicillin aptamer, led to its elution off HPLC as virtually a single species. These changes in conformational distribution as a result of thermal anneal or sonication were further confirmed by UV/vis and circular dichroism spectroscopy, as well as melt curves. The findings provided basis for future optimization of aptamer selection and preparation, where thermal anneal can help optimize selection efficiency and improve the consistency in the interpretation of results.

Tapping the potential of synthetic riboswitches: reviewing the versatility of the tetracycline aptamer

Synthetic riboswitches are a versatile class of regulatory elements that are becoming increasingly established in synthetic biology applications. They are characterized by their compact size and independence from auxiliary protein factors. While naturally occurring riboswitches were mostly discovered in bacteria, synthetic riboswitches have been designed for all domains of life. Published design strategies far exceed the number of riboswitches found in nature. A core element of any riboswitch is a binding domain, called an aptamer, which is characterized by high specificity and affinity for its ligand. Aptamers can be selected de novo, allowing the design of synthetic riboswitches against a broad spectrum of targets. The tetracycline aptamer has proven to be well suited for riboswitch engineering. Since its selection, it has been used in a variety of applications and is considered to be well established and characterized. Using the tetracycline aptamer as an example, we aim to discuss a large variety of design approaches for synthetic riboswitch engineering and their application. We aim to demonstrate the versatility of riboswitches in general and the high potential of synthetic RNA devices for creating new solutions in both the scientific and medical fields.

Spin-Labeled Riboswitch Synthesized from a Protected TPA Phosphoramidite Building Block

The nitroxide TPA (2,2,5,5-tetramethyl-pyrrolin-1-oxyl-3-acetylene) is an excellent spin label for EPR studies of RNA. Previous synthetic methods, however, are complicated and require special equipment. Herein, we describe a uridine derived phosphoramidite with a photocaged TPA unit attached. The light sensitive 2-nitrobenzyloxymethyl group can be removed in high yield by short irradiation at 365 nm. Based on this approach, a doubly spin-labeled 27mer neomycin sensing riboswitch was synthesized and studied by PELDOR. The overall thermal stability of the fold is not much reduced by TPA. In-line probing nevertheless detected changes in local mobility.

Paramagnetic Chemical Probes for Studying Biological Macromolecules

Paramagnetic chemical probes have been used in electron paramagnetic resonance (EPR) and nuclear magnetic resonance (NMR) spectroscopy for more than four decades. Recent years witnessed a great increase in the variety of probes for the study of biological macromolecules (proteins, nucleic acids, and oligosaccharides). This Review aims to provide a comprehensive overview of the existing paramagnetic chemical probes, including chemical synthetic approaches, functional properties, and selected applications. Recent developments have seen, in particular, a rapid expansion of the range of lanthanoid probes with anisotropic magnetic susceptibilities for the generation of structural restraints based on residual dipolar couplings and pseudocontact shifts in solution and solid state NMR spectroscopy, mostly for protein studies. Also many new isotropic paramagnetic probes, suitable for NMR measurements of paramagnetic relaxation enhancements, as well as EPR spectroscopic studies (in particular double resonance techniques) have been developed and employed to investigate biological macromolecules. Notwithstanding the large number of reported probes, only few have found broad application and further development of probes for dedicated applications is foreseen.

Split aptamer acquisition mechanisms and current application in antibiotics detection: a short review

Antibiotic contamination is becoming a prominent global issue. Therefore, sensitive, specific and simple technology is desirable the demand for antibiotics detection. Biosensors based on split aptamer has gradually attracted extensive attention for antibiotic detection due to its higher sensitivity, lower cost, false positive/negative avoidance and flexibility in sensor design. Although many of the reported split aptamers are antibiotics aptamers, the acquisition and mechanism of splitting is still unknow. In this review, six reported split aptamers in antibiotics are outlined, including Enrofloxacin, Kanamycin, Tetracycline, Tobramycin, Neomycin, Streptomycin, which have contributed to promote interest, awareness and thoughts into this emerging research field. The study introduced the pros and cons of split aptamers, summarized the assembly principle of split aptamer and discussed the intermolecular binding of antibiotic-aptamer complexes. In addition, the recent application of split aptamers in antibiotic detection are introduced. Split aptamers have a promising future in the design and development of biosensors for antibiotic detection in food and other field. The development of the antibiotic split aptamer meets many challenges including mechanism discovery, stability improvement and new biosensor development. It is believed that split aptamer could be a powerful molecular probe and plays an important role in aptamer biosensor.

A Carbazole-Derived Nitroxide That Is an Analogue of Cytidine: A Rigid Spin Label for DNA and RNA

A variety of semirigid and rigid spin labels comprise a valuable arsenal for measurements of biomolecular structures and dynamics by electron paramagnetic resonance (EPR) spectroscopy. Here, we report the synthesis and characterization of rigid spin labels Ċ and Ċm for DNA and RNA, respectively, that are carbazole-derived nitroxides and analogues of cytidine. Ċ and Ċm were converted to their phosphoramidites and used for their incorporation into oligonucleotides by solid-phase synthesis. Analysis of Ċ and Ċm by single-crystal X-ray crystallography verified their identity and showed little deviation from planarity of the nucleobase. Analysis of the continuous-wave (CW) EPR spectra of the spin-labeled DNA and RNA duplexes confirmed their incorporation into the nucleic acids and the line-shape was characteristic of rigid spin labels. Circular dichroism (CD) and thermal denaturation studies of the Ċ-labeled DNAs and Ċm-labeled RNAs indicated that the labels are nonperturbing of duplex structure.

Do the P1 and P2 hairpins of the Guanidine-II riboswitch interact?

Riboswitches regulate genes by adopting different structures in responds to metabolite binding. The guanidine-II riboswitch is the smallest representative of the ykkC class with the mechanism of its function being centred on the idea that its two stem loops P1 and P2 form a kissing hairpin interaction upon binding of guanidinium (Gdm⁺). This mechanism is based on in-line probing experiments with the full-length riboswitch and crystal structures of the truncated stem loops P1 and P2. However, the crystal structures reveal only the formation of the homodimers P1 | P1 and P2 | P2 but not of the proposed heterodimer P1 | P2. Here, site-directed spin labeling (SDSL) in combination with Pulsed Electron–Electron Double Resonance (PELDOR or DEER) is used to study their structures in solution and how they change upon binding of Gdm⁺. It is found that both hairpins adopt different structures in solution and that binding of Gdm⁺ does indeed lead to the formation of the heterodimer but alongside the homodimers in a statistical 1:2:1 fashion. These results do thus support the proposed switching mechanism.

Mg2+ Sensing by an RNA Fragment: Role of Mg2+-Coordinated Water Molecules

RNA molecules selectively bind to specific metal ions to populate their functional active states, making it important to understand their source of ion selectivity. In large RNA systems, metal ions interact with the RNA at multiple locations, making it difficult to decipher the precise role of ions in folding. To overcome this complexity, we studied the role of different metal ions (Mg²⁺, Ca²⁺, and K⁺) in the folding of a small RNA hairpin motif (5'-ucCAAAga-3') using unbiased all-atom molecular dynamics simulations. The advantage of studying this system is that it requires specific binding of a single metal ion to fold to its native state. We find that even for this small RNA, the folding free energy surface (FES) is multidimensional as different metal ions present in the solution can simultaneously facilitate folding. The FES shows that specific binding of a metal ion is indispensable for its folding. We further show that in addition to the negatively charged phosphate groups, the spatial organization of electronegative nucleobase atoms drives the site-specific binding of the metal ions. Even though the binding site cannot discriminate between different metal ions, RNA folds efficiently only in a Mg²⁺ solution. We show that the rigid network of Mg²⁺-coordinated water molecules facilitates the formation of important interactions in the transition state. The other metal ions such as K⁺ and Ca²⁺ cannot facilitate the formation of such interactions. These results allow us to hypothesize possible metal-sensing mechanisms in large metalloriboswitches and also provide useful insights into the design of appropriate collective variables for studying large RNA molecules using enhanced sampling methods.

Screening of multiple hemoprotein-specific aptamers and their applications for the binding, quantification, and extraction of hemoproteins in a microfluidic system

The blood hemoproteins, albumin, γ-globulin, and fibrinogen, serve as biomarkers for a variety of human diseases, including kidney and hepatorenal syndromes. Therefore, there is a need to quickly and accurately measure their concentrations in blood. Herein, nucleic acid aptamers demonstrating high affinity and specificity toward these hemoproteins were selected via systematic evolution of ligands by exponential enrichment, and their ability to capture their protein targets was assessed with sodium dodecyl sulfate-polyacrylamide gel electrophoresis followed by a tetramethyl benzidine assay. The limits of detection for the hemoproteins were all around 10-3 μM, and dissociation constant values of 131, 639, and 29nM were obtained; capture rates were measured to be 66%, 71%, and 61%, which is likely to be suitable for clinical diagnostics. Furthermore, a multi-layer microfluidic disk system featuring hemoprotein-specific aptamers for depleting hemoproteins was demonstrated. It could be a promising approach to use aptamers to replace conventional antibodies.

Site-Directed Spin Labeling of RNA with a Gem-Diethylisoindoline Spin Label: PELDOR, Relaxation, and Reduction Stability

Ribonucleic acid function is governed by its structure, dynamics, and interaction with other biomolecules and influenced by the local environment. Thus, methods are needed that enable one to study RNA under conditions as natural as possible, possibly within cells. Site-directed spin-labeling of RNA with nitroxides in combination with, for example, pulsed electron-electron double resonance (PELDOR or DEER) spectroscopy has been shown to provide such information. However, for in-cell measurements, the usually used gem-dimethyl nitroxides are less suited, because they are quickly reduced under in-cell conditions. In contrast, gem-diethyl nitroxides turned out to be more stable, but labeling protocols for binding these to RNA have been sparsely reported. Therefore, we describe here the bioconjugation of an azide functionalized gem-diethyl isoindoline nitroxide to RNA using a copper (I)-catalyzed azide-alkyne cycloaddition ("click"-chemistry). The labeling protocol provides high yields and site selectivity. The analysis of the orientation selective PELDOR data show that the gem-diethyl and gem-dimethyl labels adopt similar conformations. Interestingly, in deuterated buffer, both labels attached to RNA yield TM relaxation times that are considerably longer than observed for the same type of label attached to proteins, enabling PELDOR time windows of up to 20 microseconds. Together with the increased stability in reducing environments, this label is very promising for in-cell Electron Paramagnetic Resonance (EPR) studies.

Dynamic nuclear polarization on a hybridized hammerhead ribozyme: An explorative study of RNA folding and direct DNP with a paramagnetic metal ion cofactor

While uniform isotope labeling of ribonucleic acids (RNA) can simply and efficiently be achieved by in-vitro transcription, the specific introduction of nucleotides in larger constructs is non-trivial and often ineffective. Here, we demonstrate how a medium-sized (67-mer), biocatalytically relevant RNA (hammerhead ribozyme, HHRz) can be formed by spontaneous hybridization of two differently isotope-labeled strands, each individually synthesized by in-vitro transcription. This allows on the one hand for a significant reduction in the number of isotope-labeled nucleotides and thus spectral overlap particularly under magic-angle spinning (MAS) dynamic nuclear polarization (DNP) NMR conditions, on the other hand for orthogonal ¹³C/¹⁵N-labeling of complementary strands and thus for specific investigation of structurally or functionally relevant inter-strand and/or inter-stem contacts. By this method, we are able to confirm a non-canonical interaction due to single-site resolution and unique spectral assignments by two-dimensional ¹³C-¹³C (PDSD) as well as ¹⁵N-¹³C (TEDOR) correlation spectroscopy under "conventional" DNP enhancement. This contact is indicative of the ribozyme's functional conformation, and is present in frozen solution irrespective of the presence or absence of a Mg²⁺ co-factor. Finally, we use different isotope-labeling schemes in order to investigate the distance dependence of paramagnetic interactions and direct metal-ion DNP if the diamagnetic Mg²⁺ is substituted by paramagnetic Mn²⁺.

Nucleic acid enzymes based on functionalized nucleosides

Nucleic acid-based enzymes have recently joined their proteinaceous counterparts as important biocatalysts. While RNA enzymes (ribozymes) are found in nature, deoxyribozymes or DNAzymes are man-made entities. Numerous ribozymes and DNAzymes have been identified by Darwinian selection methods to catalyze a broad array of chemical transformations. Despite these important advances, practical applications involving nucleic acid enzymes are often plagued by relatively poor pharmacokinetic properties and cellular uptake, rapid degradation by nucleases and/or by the limited chemical arsenal carried by natural DNA and RNA. In this review, the two main chemical approaches for the modification of nucleic acid-based catalysts, particularly DNAzymes, are described. These methods aim at improving the functional properties of nucleic acid enzymes by mitigating some of these shortcomings. In this context, recent developments in the post-SELEX processing of existing nucleic acid catalysts as well as efforts for the selection of DNAzymes and ribozymes with modified nucleoside triphosphates are summarized.

Ion-dependent mobility effects of the Fusobacterium nucleatum glycine riboswitch aptamer II via site-directed spin-labeling (SDSL) electron paramagnetic resonance (EPR)

Site-directed spin-labeling (SDSL) with continuous wave electron paramagnetic resonance (cw-EPR) spectroscopy was utilized to probe site-specific changes in backbone dynamics that accompany folding of the isolated 84 nucleotide aptamer II domain of the Fusobacterium nucleatum (FN) glycine riboswitch. Spin-labels were incorporated using splinted ligation strategies. Results show differential dynamics for spin-labels incorporated into the backbone at a base-paired and loop region. Additionally, the addition of a biologically relevant concentration of 5 mM  Mg²⁺, to an RNA solution with 100 mM K⁺, folds and compacts the structure, inferred by a reduction in spin-label mobility. Furthermore, when controlling for ionic strength, Mg²⁺ added to the RNA induces more folding/less flexibility at the two sites than RNA with K⁺ alone. Addition of glycine does not alter the dynamics of this singlet aptamer II, indicating that the full length riboswitch construct may be needed for glycine binding and induced conformational changes. This work adds to our growing understanding of how splinted-ligation SDSL can be utilized to interrogate differential dynamics in large dynamic RNAs, providing insights into how RNA folding and structure is differentially stabilized by monovalent versus divalent cations.

Binding of tetracycline to its aptamer determined by 2D-correlated Mn2+ hyperfine spectroscopy

The tetracycline-binding RNA aptamer (TC-aptamer) binds its cognate ligand the antibiotic tetracycline (TC) via a Mg²⁺ or Mn²⁺ ion with high affinity at high divalent metal ion concentrations (K_D=800pM, ⩾10 mM). These concentrations lie above the physiological divalent metal ion concentration of ca. 1 mM and it is known from literature, that the binding affinity decreases upon decreasing the divalent metal ion concentration. This work uses a Mn²⁺ concentration of 1 mM and 1D-hyperfine experiments reveal two pronounced ³¹P couplings from the RNA besides the ¹³C signal of ¹³C-labeled TC. From these 1D-hyperfine data alone, however, no conclusions can be drawn on the binding of TC. Either TC may bind via Mn²⁺ to the aptamer or TC may form a free Mn-TC complex and some Mn²⁺ also binds to the aptamer. In this work, we show using 2D-correlated hyperfine spectroscopy at Q-band frequencies (34 GHz), that the ¹³C and ³¹P signals can be correlated; thus arising from a single species. We use THYCOS (triple hyperfine correlation spectroscopy) and 2D ELDOR-detected NMR (2D electron electron double resonance detected NMR) for this purpose showing that they are suitable techniques to correlate two different nuclear spin species (¹³C and ³¹P) on two different molecules (RNA and TC) to the same electron spin (Mn²⁺). Out of the two observed ³¹P-hyperfine couplings, only one shows a clear correlation to ¹³C. Although THYCOS and 2D EDNMR yield identical results, 2D EDNMR is far more sensitive. THYCOS spectra needed a time factor of ×20 in comparison to 2D EDNMR to achieve a comparable signal-to-noise.