Competitive regulation of modular allosteric aptazymes by a small molecule and oligonucleotide effector

Reductive Charge Transfer through an RNA Aptamer

The transfer of charges through double helical DNA is a very well investigated bioelectric phenomenon. RNA, on the contrary, has been less studied in this regard. The few available data report on charge transfer through RNA duplex structures mainly composed of homonucleotide sequences. In the light of the RNA world scenarios, it is an interesting question, if charge transfer can be coupled with RNA function. Functional RNAs however, contain versatile structural motifs. Therefore, electron transport also through non‐Watson–Crick base‐paired regions might be required. We here demonstrate distance‐dependent reductive charge transfer through RNA duplexes and through the non‐Watson–Crick base‐paired region of an RNA aptamer.

Assembly of a Ribozyme Ligase from Short Oligomers by Nonenzymatic Ligation

Our current understanding of the chemistry of the primordial genetic material is fragmentary at best. The chemical replication of oligonucleotides long enough to perform catalytic functions is particularly problematic because of the low efficiency of nonenzymatic template copying. Here we show that this problem can be circumvented by assembling a functional ribozyme by the templated ligation of short oligonucleotides. However, this approach creates a new problem because the splint oligonucleotides used to drive ribozyme assembly strongly inhibit the resulting ribozyme. We explored three approaches to the design of splint oligonucleotides that enable efficient ligation but which allow the assembled ribozyme to remain active. DNA splints, splints with G:U wobble pairs, and splints with G to I (Inosine) substitutions all allowed for the efficient assembly of an active ribozyme ligase. Our work demonstrates the possibility of a transition from nonenzymatic ligation to enzymatic ligation and reveals the importance of avoiding ribozyme inhibition by complementary oligonucleotides.

Duplexed aptamers: history, design, theory, and application to biosensing

Nucleic acid aptamers are single stranded DNA or RNA sequences that specifically bind a cognate ligand. In addition to their widespread use as stand-alone affinity binding reagents in analytical chemistry, aptamers have been engineered into a variety of ligand-specific biosensors, termed aptasensors. One of the most common aptasensor formats is the duplexed aptamer (DA). As defined herein, DAs are aptasensors containing two nucleic acid elements coupled via Watson-Crick base pairing: (i) an aptamer sequence, which serves as a ligand-specific receptor, and (ii) an aptamer-complementary element (ACE), such as a short DNA oligonucleotide, which is designed to hybridize to the aptamer. The ACE competes with ligand binding, such that DAs generate a signal upon ligand-dependent ACE-aptamer dehybridization. DAs possess intrinsic advantages over other aptasensor designs. For example, DA biosensing designs generalize across DNA and RNA aptamers, DAs are compatible with many readout methods, and DAs are inherently tunable on the basis of nucleic acid hybridization. However, despite their utility and popularity, DAs have not been well defined in the literature, leading to confusion over the differences between DAs and other aptasensor formats. In this review, we introduce a framework for DAs based on ACEs, and use this framework to distinguish DAs from other aptasensor formats and to categorize cis- and trans-DA designs. We then explore the ligand binding dynamics and chemical properties that underpin DA systems, which fall under conformational selection and induced fit models, and which mirror classical SN1 and SN2 models of nucleophilic substitution reactions. We further review a variety of in vitro and in vivo applications of DAs in the chemical and biological sciences, including riboswitches and riboregulators. Finally, we present future directions of DAs as ligand-responsive nucleic acids. Owing to their tractability, versatility and ease of engineering, DA biosensors bear a great potential for the development of new applications and technologies in fields ranging from analytical chemistry and mechanistic modeling to medicine and synthetic biology.

Ligand-dependent ribozymes

The discovery of catalytic RNA (ribozymes) more than 30 years ago significantly widened the horizon of RNA-based functions in natural systems. Similarly to the activity of protein enzymes that are often modulated by the presence of an interaction partner, some examples of naturally occurring ribozymes are influenced by ligands that can either act as cofactors or allosteric modulators. Recent discoveries of new and widespread ribozyme motifs in many different genetic contexts point toward the existence of further ligand-dependent RNA catalysts. In addition to the presence of ligand-dependent ribozymes in nature, researchers have engineered ligand dependency into natural and artificial ribozymes. Because RNA functions can often be assembled in a truly modular way, many different systems have been obtained utilizing different ligand-sensing domains and ribozyme activities in diverse applications. We summarize the occurrence of ligand-dependent ribozymes in nature and the many examples realized by researchers that engineered ligand-dependent catalytic RNA motifs. We will also highlight methods for obtaining ligand dependency as well as discuss the many interesting applications of ligand-controlled catalytic RNAs. WIREs RNA 2017, 8:e1395. doi: 10.1002/wrna.1395 For further resources related to this article, please visit the WIREs website.

In vitro selection of allosteric ribozymes that sense the bacterial second messenger c-di-GMP

Recently, a number of study have shown the ligand-dependent allosteric ribozymes can be harnessed as biosensors, high-throughput screening, and agents for the control of gene expression in vivo, called artificial riboswitches. In this chapter, we describe how in vitro selection can be used to create an allosteric ribozyme that senses bacterial second messenger cyclic-di-GMP (c-di-GMP). A hammerhead ribozyme was joined to a natural c-di-GMP class I riboswitch aptamer via communication modules. Both c-di-GMP-activating and -inhibiting ribozyme can be obtained by this approach.

Cooperative multicomponent self-assembly of nucleic acid structures for the activation of DNAzyme cascades: a paradigm for DNA sensors and aptasensors

The activation of a DNAzyme cascade by the cooperative self-assembly of multicomponent nucleic acid structures is suggested as a method for the amplified sensing of DNA, or the specific substrates of aptamers. According to one configuration, the DNA analyte 1 is detected by two tailored nucleic acids 2 and 3 that form a multicomponent supramolecular structure with a ribonucleobase-containing quasi-circular DNA 4, but only upon the concomitant hybridization with 1. The resulting supramolecular nucleic acid structure includes the Mg(2+)-dependent DNAzyme that cleaves the ribonucleobase site of 4. The cleavage of the quasi-circular DNA 4 results in the fragmentation of the supramolecular structure and the release of two horseradish peroxidase (HRP) mimicking units that were incorporated in the blocked quasi-circular DNA 4. The HRP-mimicking DNAzyme catalyzed the oxidation of 2,2'-azino-bis(3-ethylbenzothiazoline)-6-sulfonic acid (ABTS(2-)) by H(2)O(2) to ABTS(*-), and the product provided the colorimetric readout signal for the analyzed DNA. The method enabled the analysis of DNA with a detection limit of 1 x 10(-12) M. Similarly, an analogous DNAzyme cascade was activated by the low-molecular-weight substrates, adenosine triphosphate (ATP) or cocaine. This was induced by the self-assembly of nucleic acids that included fragments of the respective aptamers and the Mg(2+)-dependent DNAzyme. Furthermore, nucleic acids consisting of fragments of the aptamers against ATP or cocaine and fragments of the HRP-mimicking DNAzyme self-assemble, in the presence of the respective substrates, to the active DNAzyme structure that catalyzes the oxidation of ABTS(2-) by H(2)O(2) to form the colored product ABTS(*-). The resulting product provided the readout signal for the recognition events. The cooperative interaction in the formation of the supramolecular nucleic acid assemblies and the activation of the DNAzymes are discussed.

Characterization of a fluorophore binding RNA aptamer by fluorescence correlation spectroscopy and small angle X-ray scattering

Using fluorescence correlation spectroscopy (FCS), we have established an in vitro assay to study RNA dynamics by analyzing fluorophore binding RNA aptamers at the single molecule level. The RNA aptamer SRB2m, a minimized variant of the initially selected aptamer SRB-2, has a high affinity to the disulfonated triphenylmethane dye sulforhodamine B. A mobility shift of sulforhodamine B after binding to SRB2m was measured. In contrast, patent blue V (PBV) is visible only if complexed with SRB2m due to increased molecular brightness and minimal background. With small angle X-ray scattering (SAXS), the three-dimensional structure of the RNA aptamer was characterized at low resolution to analyze the effect of fluorophore binding. The aptamer and sulforhodamine B-aptamer complex was found to be predominantly dimeric in solution. Interaction of PBV with SRB2m led to a dissociation of SRB2m dimers into monomers. Radii of gyration and hydrodynamic radii, gained from dynamic light scattering, FCS, and fluorescence cross-correlation experiments, led to comparable conclusions. Our study demonstrates how RNA-aptamer fluorophore complexes can be simultaneously structurally and photophysically characterized by FCS. Furthermore, fluorophore binding RNA aptamers provide a tool for visualizing single RNA molecules.

Modular reporter hairpin ribozymes for analyzing molecular interactions

Methods for the detection of biologically relevant interactions by highly precise catalytic control elements based on hairpin ribozymes, and their subsequent analysis are described. These include ribozyme design, catalytic performance in real time as a function of fluorescence signal amplification, and applications for sensing protein and nucleic acid interactions in high-throughput formats. Detailed instructions for two of our main reporter ribozyme formats that either follow repressible or inducible regulatory mechanisms are provided. We have shown that these techniques can be applied for detecting diverse target molecules including microRNAs, or protein-protein interactions. These reporter systems thus represent a general way to obtain signal-amplifying sensors for diverse applications in molecular profiling.

Simple fluorescent sensors engineered with catalytic DNA 'MgZ' based on a non-classic allosteric design

Most NAE (nucleic acid enzyme) sensors are composed of an RNA-cleaving catalytic motif and an aptameric receptor. They operate by activating or repressing the catalytic activity of a relevant NAE through the conformational change in the aptamer upon target binding. To transduce a molecular recognition event to a fluorescence signal, a fluorophore-quencher pair is attached to opposite ends of the RNA substrate such that when the NAE cleaves the substrate, an increased level of fluorescence can be generated. However, almost all NAE sensors to date harbor either NAEs that cannot accommodate a fluorophore-quencher pair near the cleavage site or those that can accept such a modification but require divalent transition metal ions for catalysis. Therefore, the signaling magnitude and the versatility of current NAE sensors might not suffice for analytical and biological applications. Here we report an RNA-cleaving DNA enzyme, termed ‘MgZ’, which depends on Mg²⁺ for its activity and can accommodate bulky dye moieties next to the cleavage site. MgZ was created by in vitro selection. The selection scheme entailed acidic buffering and ethanol-based reaction stoppage to remove selfish DNAs. Characterization of MgZ revealed a three-way junction structure, a cleavage rate of 1 min⁻¹, and 26-fold fluorescence enhancement. Two ligand-responsive NAE sensors were rationally designed by linking an aptamer sequence to the substrate of MgZ. In the absence of the target, the aptamer-linked substrate is locked into a conformation that prohibits MgZ from accessing the substrate. In the presence of the target, the aptamer releases the substrate, which induces MgZ-mediated RNA cleavage. The discovery of MgZ and the introduction of the above NAE sensor design strategy should facilitate future efforts in sensor engineering.

Reversible photo-regulation of a hammerhead ribozyme using a diffusible effector

The potential utility of catalytic RNAs and DNAs (ribozymes and deoxyribozymes, respectively) as reagents in molecular biology as well as therapeutic agents for a variety of human diseases, has long been recognized. Although naturally occurring RNA-cleaving ribozymes are typically not subject to feedback control, rational methodologies for the creation of allosteric ribozymes, by functional combination of ribozyme and ligand-responsive aptamer RNA elements, have existed for some years. Here, we report the in vitro selection of RNA aptamers specific for binding one but not the other of two light-induced isomers of a dihydropyrene photo-switch compound, and the utilization of such an aptamer for the construction of the UG-dihydropyrene ribozyme, an allosteric hammerhead ribozyme whose catalysis is controllable by irradiation with visible versus ultraviolet light. In the presence of micromolar concentrations of the photo-switch compound, the ribozyme behaves as a two-state switch, exhibiting a >900-fold difference in catalytic rates between the two irradiation regimes. We anticipate that the UG-dihydropyrene, and other ribozymes like it, may find significant application in the developmental biology of model organisms such as Drosophila melanogaster and Caenorhabditis elegans, as well as in the biomedical sciences.

DNA aptamer-mediated regulation of the hairpin ribozyme by human alpha-thrombin

The combination of specific ligand-binding aptamers with hairpin ribozyme catalysis generates molecules that can be controlled by external factors. Here we have generated hairpin ribozymes that can be regulated by a short DNA aptamer specific for human alpha-thrombin. This was achieved by constructing a ribozyme variant harboring an RNA sequence complementary to the aptamer, to which the aptamer can hybridize forming a heteroduplex. In this way, the DNA aptamer completely abolishes the catalytic activity of the ribozyme, due to the formation of an inactive ribozyme conformation. However, in the presence of the aptamer's target protein human alpha-thrombin, the inhibitory effect of the DNA aptamer is competitively neutralized and the ribozyme is activated in a highly specific fashion. Protein-responsive allosteric ribozymes are proposed to act as tools with potential applications in medicine where fast detection of clinically relevant targets is required.

Deoxyribozymes that recode sequence information

Allosteric nucleic acid ligases have been used previously to transform analyte-binding into the formation of oligonucleotide templates that can be amplified and detected. We have engineered binary deoxyribozyme ligases whose two components are brought together by bridging oligonucleotide effectors. The engineered ligases can 'read' one sequence and then 'write' (by ligation) a separate, distinct sequence, which can in turn be uniquely amplified. The binary deoxyribozymes show great specificity, can discriminate against a small number of mutations in the effector, and can read and recode DNA information with high fidelity even in the presence of excess obscuring genomic DNA. In addition, the binary deoxyribozymes can read non-natural nucleotides and write natural sequence information. The binary deoxyribozyme ligases could potentially be used in a variety of applications, including the detection of single nucleotide polymorphisms in genomic DNA or the identification of short nucleic acids such as microRNAs.