Transponder-based sensor for monitoring electrical properties of biological cell solutions

Resonant Sensors for Low-Cost, Contact-Free Measurement of Hydrolytic Enzyme Activity in Closed Systems

A passive, resonant sensor was developed that can be embedded in closed systems for wireless monitoring of hydrolytic enzyme activity. The resonators are rapidly prototyped from copper coated polyimide substrates that are masked using an indelible marker with an XY plotter and subsequently etched. The resonator's frequency response window is designed by the Archimedean coil length and pitch and is tuned for the 1-100 MHz range for better penetration through soil, water, and tissue. The resonant frequency is measured up to 5 cm stand-off distance by a coplanar, two-loop coil reader antenna attached to a vector network analyzer monitoring the S21 scattering parameter. The resonant frequency is modulated (up to 50 MHz redshift) by changing the relative permittivity of the medium in contact with the resonator (e.g., air to water). The resonant sensors are coated by an enzyme substrate, which, when degraded, causes a change in dielectric and a shift in resonant frequency (up to 7 MHz redshift). The activity (turnover rate, or k_cat) of the enzyme is calculated by fitting the measured data via a custom transport and reaction model which simulates the radial digestion profile. This is used to test purified Subtilisin A and unpurified bacterial protease samples at concentrations of 30 mg/mL to 200 mg/mL with k_cat ranges of 0.003-0.002 and 0.008-0.004 g_substrate/ g_enzyme per second. The sensor response rate can be tuned by substrate composition (e.g., gelatin and glycerol plasticizer weight percentage). Finally, the utility of these sensors is demonstrated by wirelessly measuring the proteolytic activity of farm soil with a measured k_cat of 0.00152 g_substrate/( g_soil·s).

Passive multivariable temperature and conductivity RFID sensors for single-use biopharmaceutical manufacturing components

Single-use biopharmaceutical manufacturing requires monitoring of critical manufacturing parameters. We have developed an approach for passive radio-frequency identification (RFID)-based sensing that converts ubiquitous passive 13.56 MHz RFID tags into inductively coupled sensors. We combine several measured parameters from the resonant sensor antenna with multivariate data analysis and deliver unique capability of multiparameter sensing and rejection of environmental interferences with a single sensor. We demonstrate here the integration of these RFID sensors into single-use biopharmaceutical manufacturing components. We have tested these sensors for over 500 h for measurements of temperature and solution conductivity with the accuracy of 0.1°C (32-48°C range) and accuracy of 0.3-2.9 mS/cm (0.5-230 mS/cm range). We further demonstrate simultaneous temperature and conductivity measurements with an individual RFID sensor with the accuracy of 0.2°C (5-60°C range) and accuracy of 0.9 mS/cm (0.5-183 mS/cm range). Developed RFID sensors provide several important features previously unavailable from other single-use sensing technologies such as the same sensor platform for measurements of physical, chemical, and biological parameters; multi-parameter monitoring with individual sensors; and simultaneous digital identification.

Bacteria Growth Monitoring Through a Differential CMOS Capacitive Sensor

In this paper, we present a bacteria growth monitoring technique using a complementary metal-oxide semiconductor capacitive sensor. The proposed platform features a differential capacitive readout architecture with two interdigitized reference and sensing electrodes. These electrodes are exposed to pure Luria-Bertani (LB) medium and Escherichia Coli (E. Coli) bacteria suspended in the LB medium, respectively. In order to direct the solutions toward the electrodes, two microfluidic channels are implemented atop the electrodes through a direct-write assembly technique. We thereafter demonstrate and discuss the experimental results by using two different bacteria concentrations in the order of 10(6) and 10(7) per 1 mL in the LB medium.

Multianalyte Chemical Identification and Quantitation Using a Single Radio Frequency Identification Sensor

We demonstrate an approach for multianalyte chemical identification and quantitation using a single conventional radio frequency identification (RFID) tag that has been adapted for chemical sensing. Unlike other approaches of using RFID sensors, where a special tag should be designed at a much higher cost, we utilize a conventional RFID tag and coat it with a chemically sensitive film. As an example, we demonstrate detection of several vapors of industrial, health, law enforcement, and security interest (ethanol, methanol, acetonitrile, water vapors) with a single 13.56-MHz RFID tag coated with a solid polymer electrolyte sensing film. By measuring simultaneously several parameters of the complex impedance from such an RFID sensor and applying multivariate statistical analysis methods, we were able to identify and quantify several vapors of interest. With a careful selection of the sensing film and measurement conditions, we achieved parts-per-billion vapor detection limits in air. These RFID sensors are very attractive as ubiquitous multianalyte distributed sensor networks.