Genetic variation in drought resilience-related traits among wheat multiple synthetic derivative lines: insights for climate resilience breeding

Heat Stress-Tolerant Quantitative Trait Loci Identified Using Backcrossed Recombinant Inbred Lines Derived from Intra-Specifically Diverse Aegilops tauschii Accessions

In the face of climate change, bringing more useful alleles and genes from wild relatives of wheat is crucial to develop climate-resilient varieties. We used two populations of backcrossed recombinant inbred lines (BIL1 and BIL2), developed by crossing and backcrossing two intra-specifically diverse Aegilops tauschii accessions from lineage 1 and lineage 2, respectively, with the common wheat cultivar 'Norin 61'. This study aimed to identify quantitative trait loci (QTLs) associated with heat stress (HS) tolerance. The two BILs were evaluated under heat stress environments in Sudan for phenology, plant height (PH), grain yield (GY), biomass (BIO), harvest index (HI), and thousand-kernel weight (TKW). Grain yield was significantly correlated with BIO and TKW under HS; therefore, the stress tolerance index (STI) was calculated for these traits as well as for GY. A total of 16 heat-tolerant lines were identified based on GY and STI-GY. The QTL analysis performed using inclusive composite interval mapping identified a total of 40 QTLs in BIL1 and 153 QTLs in BIL2 across all environments. We detected 39 QTLs associated with GY-STI, BIO-STI, and TKW-STI in both populations (14 in BIL1 and 25 in BIL2). The QTLs associated with STI were detected on chromosomes 1A, 3A, 5A, 2B, 4B, and all the D-subgenomes. We found that QTLs were detected only under HS for GY on chromosome 5A, TKW on 3B and 5B, PH on 3B and 4B, and grain filling duration on 2B. The higher number of QTLs identified in BIL2 for heat stress tolerance suggests the importance of assessing the effects of intraspecific variation of Ae. tauschii in wheat breeding as it could modulate the heat stress responses/adaptation. Our study provides useful genetic resources for uncovering heat-tolerant QTLs for wheat improvement for heat stress environments.

Identification of Glu-D1 Alleles and Novel Marker-Trait Associations for Flour Quality and Grain Yield Traits under Heat-Stress Environments in Wheat Lines Derived from Diverse Accessions of Aegilops tauschii

Heat stress during grain filling is considered one of the major abiotic factors influencing wheat grain yield and quality in arid and semi-arid regions. We studied the effect of heat stress on flour quality and grain yield at moderate and continuous heat stress under natural field conditions using 147 lines of wheat multiple synthetic derivatives (MSD) containing Aegilops tauschii introgressions. The study aimed to identify the marker–trait associations (MTAs) for the quality traits and grain yield under heat-stress conditions and identify stress-resilient germplasm-combining traits for good flour quality and grain yield. The MSD lines showed considerable genetic variation for quality traits and grain yield under heat-stress conditions; some lines performed better than the recurrent parent, Norin 61. We identified two MSD lines that consistently maintained relative performance (RP) values above 100% for grain yield and dough strength. We found the presence of three high-molecular-weight glutenin subunits (HMW-GSs) at the Glu-D1 locus derived from Ae. tauschii, which were associated with stable dough strength across the four environments used in this study. These HMW-GSs could be potentially useful in applications for future improvements of end-use quality traits targeting wheat under severe heat stress. A total of 19,155 high-quality SNP markers were used for the genome-wide association analysis and 251 MTAs were identified, most of them on the D genome, confirming the power of the MSD panel as a platform for mining and exploring the genes of Ae. tauschii. We identified the MTAs for dough strength under heat stress, which simultaneously control grain yield and relative performance for dough strength under heat-stress/optimum conditions. This study proved that Ae. tauschii is an inexhaustible resource for genetic mining, and the identified lines and pleiotropic MTAs reported in this study are considered a good resource for the development of resilient wheat cultivars that combine both good flour quality and grain yield under stress conditions using marker-assisted selection.

Exploiting Wild Emmer Wheat Diversity to Improve Wheat A and B Genomes in Breeding for Heat Stress Adaptation

Wheat is highly sensitive to temperature beyond the optimum. To improve wheat adaptation to heat stress, the best option is to exploit the diversity of wild wheat progenitors. This study aimed to identify germplasm and quantitative trait loci associated with heat stress tolerance from wild emmer wheat diversity. We evaluated a diverse set of multiple derivative lines harboring chromosome segments from nine wild emmer wheat parents under four environments: two optimum environments at Tottori, Japan and Dongola, Sudan, one moderate heat stress environment, and one severe heat stress environment at Wad Medani, Sudan. Genome-wide association analysis was conducted with 13,312 SNP markers. Strong marker-trait associations (MTAs) were identified for chlorophyll content at maturity on chromosomes 1A and 5B: these MTAs explained 28.8 and 26.8% of the variation, respectively. A region on chromosome 3A (473.7-638.4 Mbp) contained MTAs controlling grain yield, under optimum and severe heat stress. Under severe heat stress, regions on chromosomes 3A (590.4-713.3 Mbp) controlled grain yield, biomass, days to maturity and thousand kernel weight, and on 3B (744.0-795.2 Mbp) grain yield and biomass. Heat tolerance efficiency (HTE) was controlled by three MTAs, one each on chromosomes 2A, 2B, and 5A under moderate heat stress and one MTA on chromosome 3A under severe heat stress. Some of the MTAs found here were previously reported, but the new ones originated from the wild emmer wheat genomes. The favorable alleles identified from wild emmer wheat were absent or rare in the elite durum wheat germplasm being bred for heat stress tolerance. This study provides potential genetic materials, alleles, MTAs, and quantitative trait loci for enhancing wheat adaptation to heat stress. The derivative lines studied here could be investigated to enhance other stress tolerance such as drought and salinity.

Enhancing Wheat Flour Quality Through Introgression of High-Molecular-Weight Glutenin Subunits From Aegilops tauschii Accessions

Narrow genetic diversity in the wheat gene pool restricts the improvement of wheat quality traits. Aegilops tauschii possesses valuable genetic diversity that can be used to improve not only biotic and abiotic stresses in arid regions but also wheat yield and quality. Our study, which used 392 multiple synthetic derivatives (MSD) panel developed with Ae. tauschii Coss. introgressions, had three main aims: to explore the genetic diversity of high-molecular-weight glutenin subunits (HMW-GS), to investigate the dough strength and the relationship between protein content and grain yield, and to identify lines with a good flour quality. A wide range of allelic diversity was observed at the Glu-D1 locus, reflecting the impact of the different introgressed portions of Ae. tauschii, and a wide variation was found in dough strength even between lines having the same composition of HMW-GS. We report a negative impact on dough strength of subunit 5t+10t from Ae. tauschii and a relatively positive impact of subunit 2t+12.1t. We identified four MSD lines with significantly enhanced flour quality. Regressing the grain yield of the MSD lines against protein content showed no correlation between the two traits and identified lines with comparable grain yield to the recurrent parent and higher protein content. The identified MSD lines could provide a valuable genetic resource for enhancing the end-use quality of flour without any loss in productivity.

Genomic analysis for heat and combined heat-drought resilience in bread wheat under field conditions

KEY MESSAGE

GWAS on a bread wheat panel with high D genome diversity identified novel alleles and QTLs associated with resilience to combined heat and drought stress under natural field conditions. As heat (H) and drought stresses occur concurrently under field conditions, studying them separately offers limited opportunities for wheat improvement. Here, a wheat diversity panel containing Aegilops tauschii introgressions was evaluated under H and combined heat-drought (HD) stresses to identify quantitative trait loci (QTLs) associated with resilience to the stresses, and to assess the practicability of harnessing Ae. tauschii diversity for breeding for combined stress resilience. Using genome-wide analysis, we identified alleles and QTLs on chromosomes 3D, 5D, and 7A controlling grain yield (GY), kernel number per spike, and thousand-kernel weight, and on 3D (521-549 Mbp) controlling GY alone. A strong marker-trait association (MTA) for GY stability on chromosome 3D (508.3 Mbp) explained 20.3% of the variation. Leaf traits-canopy temperature, vegetation index, and carbon isotope composition-were controlled by five QTLs on 2D (23-96, 511-554, and 606-614 Mbp), 3D (155-171 Mbp), and 5D (407-413 Mbp); some of them were pleiotropic for GY and yield-related traits. Further analysis revealed candidate genes, including GA20ox, regulating GY stability, and CaaX prenyl protease 2, regulating canopy temperature at the flowering stage, under H and HD stresses. As genome-wide association studies under HD in field conditions are scarce, our results provide genomic landmarks for wheat breeding to improve adaptation to H and HD conditions under climate change.

Transpiration response of two bread wheat lines differing in drought resilience and their backcross parent under dry-down conditions

Improving wheat productivity in drylands largely depends on how plants manage limited water resources. Using fraction of transpirable soil water threshold (FTSWTh) and drought stress response function, we characterized the water conservation traits of two wheat multiple synthetic derivative lines (MSD53 and MSD345) which both contain introgressed segments from Aegilops tauschii but differ in drought resilience. The lines and their backcross parent, 'Norin 61', were subjected to dry-down conditions. MSD53 had a higher FTSWTh for transpiration decrease than 'Norin 61' and MSD345. In terms of drought stress response function, MSD53 had the lowest threshold suction, suggesting a lower drought resilience capacity compared with MSD345. However, MSD53 exhibited an effective-water-use trait whereas MSD345 exhibited a water-saving trait under dry-down conditions. These results are consistent with the reported higher yield of MSD53 in comparison with MSD345 under drought stress in Sudan, and demonstrate that high FTSWTh supports effective water use for improved agricultural productivity in drylands. The differences in water conservation traits between the two MSD lines may be attributed to variation in introgressed segments, which can be further explored for drought resilience breeding.