Crystalline behavior of chitosan organic acid salts

Chiral Nanostructured Glycerohydrogel Sol-Gel Plates of Chitosan L- and D-Aspartate: Supramolecular Ordering and Optical Properties

A comprehensive study was performed on the supramolecular ordering and optical properties of thin nanostructured glycerohydrogel sol-gel plates based on chitosan L- and D-aspartate and their individual components in the X-ray, UV, visible, and IR ranges. Our comparative analysis of chiroptical characteristics, optical collimated transmittance, the average cosine of the scattering angle, microrelief and surface asymmetry, and the level of structuring shows a significant influence of the wavelength range of electromagnetic radiation and the enantiomeric form of aspartic acid on the functional characteristics of the sol-gel materials. At the macrolevel of the supramolecular organization, a complex topography of the surface layer and a dense amorphous-crystalline ordering of polymeric substances were revealed, while at the nanolevel, there were two forms of voluminous scattering domains: nanospheres with diameters of 60-120 nm (L-) and 45-55 nm (D-), anisometric particles of lengths within ~100-160 (L-) and ~85-125 nm (D-), and widths within ~10-20 (L-) and ~20-30 nm (D-). The effect of optical clearing on glass coated with a thin layer of chitosan L-(D-)aspartate in the near-UV region was discovered (observed for the first time for chitosan-based materials). The resulting nanocomposite shape-stable glycerohydrogels seem promising for sensorics and photonics.

Requirements in structure for chiral recognition of chitosan derivatives

In order to investigate the influence of a minor variation in structure of N-acyl chitosan derivatives on enantioseparation, chiral selectors (CSs) of chitosan 3,6-bis(phenylcarbamate)-2-(phenylacetamide)s and chitosan 3,6-bis(phenylcarbamate)-2-(cyclohexylacetamide)s were synthesized. The corresponding chiral stationary phases (N-PhAc CSPs and N-cHeAc CSPs) were also prepared, respectively, with the two series of CSs. Enantioseparation results revealed that the N-PhAc CSPs were better than the N-cHeAc ones in enantioseparation. Thus, benzyl group (Bn) at C₂ should be more preferable to enantioseparation than cyclohexylmethyl (cyclohexyl-CH₂-) at the same position. Because N-PhAc CSPs exhibited higher enantioseparation capability than chitosan 3,6-bis(phenylcarbamate)-2-(benzamide) based CSPs (N-Bz CSPs), the Bn should also be more beneficial to enantioseparation than phenyl group (Ph) at C₂ in N-Bz CSPs. In addition, it was found that, the cyclohexyl group at C₂ in chitosan 3,6-bis(phenylcarbamate)-2-(cyclohexylformamide) CSPs was better than cyclohexyl-CH₂- in N-cHeAc CSPs to enantioseparation. In a word, a minor variation at C₂ of chitosan derivatives significantly affected enantioseparation. After the prepared CSPs were stood for six months, their enantioseparation capabilities were changed obviously, and the changes were probably related to nature, position and number of a substituent on Ph connected to carbamates at C₃ and C₆ of the CSs.

Biocomposite Materials Based on Chitosan and Lignin: Preparation and Characterization

In this study, bioactive composite systems based on natural polymers (chitosan and lignin) were prepared in this study. The structural, mechanical, and morphological properties of chitosan-based materials containing various amounts of lignin filler were investigated. The infra-red IR spectroscopy data confirmed the formation of chemical bonds between the components of the obtained composites. The mechanical properties of film samples were studied in air and in physiological solution. It was demonstrated that the breaking elongation values of the obtained film samples in the wet state were higher (150–160%) than the corresponding (average) value of a pure chitosan film (100%). The scanning electron microscopy and atomic force microscopy data demonstrated that the introduction of lignin had caused significant changes in the surface morphology of films. The appearance of a strongly pronounced texture and porosity facilitated cell proliferation on the surface of composites, i.e., the bioactivity of film samples was enhanced with an increasing lignin content in the chitosan matrix.

Physicochemical Properties and Cell Viability of Shrimp Chitosan Films as Affected by Film Casting Solvents. I-Potential Use as Wound Dressing

Chitosan solubility in aqueous organic acids has been widely investigated. However, most of the previous works have been done with plasticized chitosan films and using acetic acid as the film casting solvent. In addition, the properties of these films varied among studies, since they are influenced by different factors such as the chitin source used to produce chitosan, the processing variables involved in the conversion of chitin into chitosan, chitosan properties, types of acids used to dissolve chitosan, types and amounts of plasticizers and the film preparation method. Therefore, this work aimed to prepare chitosan films by the solvent casting method, using chitosan derived from Litopenaeus vannamei shrimp shell waste, and five different organic acids (acetic, lactic, maleic, tartaric, and citric acids) without plasticizer, in order to evaluate the effect of organic acid type and chitosan source on physicochemical properties, degradation and cytotoxicity of these chitosan films. The goal was to select the best suited casting solvent to develop wound dressing from shrimp chitosan films. Shrimp chitosan films were analyzed in terms of their qualitative assessment, thickness, water vapor permeability (WVP), water vapor transmission rate (WVTR), wettability, tensile properties, degradation in phosphate buffered saline (PBS) and cytotoxicity towards human fibroblasts using the resazurin reduction method. Regardless of the acid type employed in film preparation, all films were transparent and slightly yellowish, presented homogeneous surfaces, and the thickness was compatible with the epidermis thickness. However, only the ones prepared with maleic acid presented adequate characteristics of WVP, WVTR, wettability, degradability, cytotoxicity and good tensile properties for future application as a wound dressing material. The findings of this study contributed not only to select the best suited casting solvent to develop chitosan films for wound dressing but also to normalize a solubilization protocol for chitosan, derived from Litopenaeus vannamei shrimp shell waste, which can be used in the pharmaceutical industry.

Dual spinneret electrospun nanofibrous/gel structure of chitosan-gelatin/chitosan-hyaluronic acid as a wound dressing: In-vitro and in-vivo studies

Structural and compositional similarity to the natural extracellular matrix (ECM) is a main characteristic of an ideal scaffold for tissue regeneration. In order to resemble the fibrous/gel structure of skin ECM, a multicomponent scaffold was fabricated using biopolymers with structural similarity to ECM and wound healing properties i.e., chitosan (CS), gelatin (Gel) and hyaluronic acid (HA). The CS-Gel and CS-HA nanofibers were simultaneously electrospun on the collector through dual-electrospinning technique. The presence of polymers, possible interactions, and formation of polyelectrolyte complex were proven by attenuated total reflectance Fourier transform infrared (ATR-FTIR) spectroscopy and thermogravimetric analysis (TGA). The noncomplex component of CS-HA fibers formed a gel state when the scaffold was exposed to the aqueous media, while the CS-Gel fibers reserved their fibrous structure, resulting in formation of fibrous/gel structure. The CS-Gel/CS-HA scaffold showed significantly higher cell proliferation (109%) in the first 24 h comparing with CS (90%) and CS-Gel (96%) scaffolds. Additionally, the initial cell adhesion improved by incorporation of HA. The in-vivo wound healing results in rat elucidated more wound healing capability of the CS-Gel/CS-HA scaffold in which new tissue with most similarity to the normal skin was formed.

Ionic Conductivity and Structure of Chitosan Films Modified with Lactic Acid-Choline Chloride NADES

The natural deep eutectic solvent (NADES) based on choline chloride (ChCl) and lactic acid (LA) was used for the preparation of chitosan (CS) films by the solution casting method. The content of NADES in films was from 0 to 82 wt%. The impact of NADES on the morphology and crystalline structure of films was investigated using scanning electron microscopy as well as wide-angle and small-angle X-ray scattering. The experimental results allow to propose CS chains swelling in NADES. FTIR spectroscopy confirms the interactions between CS and NADES components via the formation of hydrogen and ion bonds. The thermal properties of the composite films were studied by simultaneous thermogravimetric and differential thermal analysis. Thermomechanical analysis demonstrated appearance of two transitions at temperatures between -23 and -5 °C and 54-102 °C depending on NADES content. It was found that electrical conductivity of film with 82 wt% of NADES reaches 1.7 mS/cm. The influence of the composition and structure of films on the charge carriers concentration and their mobility is discussed.

Tuning the Hydrophilic/Hydrophobic Balance to Control the Structure of Chitosan Films and Their Protein Release Behavior

The control over the crystallinity of chitosan and chitosan/ovalbumin films can be achieved via an appropriate balance of the hydrophilic/hydrophobic interactions during the film formation process, which then controls the release kinetics of ovalbumin. Chitosan films were prepared by solvent casting. The presence of the anhydrous allomorph can be viewed as a probe of the hydrophobic conditions at the neutralization step. The semicrystalline structure, the swelling behavior of the films, the protein/chitosan interactions, and the release behavior of the films were impacted by the DA and the film processing parameters. At low DAs, the chitosan films neutralized in the solid state corresponded to the most hydrophobic environment, inducing the crystallization of the anhydrous allomorph with and without protein. The most hydrophilic conditions, leading to the hydrated allomorph, corresponded to non-neutralized films for the highest DAs. For the non-neutralized chitosan acetate (amorphous) films, the swelling increased when the DA decreased, whereas for the neutralized chitosan films, the swelling decreased. The in vitro release of ovalbumin (model protein) from chitosan films was controlled by their swelling behavior. For fast swelling films (DA = 45%), a burst effect was observed. On the contrary, a lag time was evidenced for DA = 2.5% with a limited release of the protein. Furthermore, by blending chitosans (DA = 2.5% and 45%), the release behavior was improved by reducing the burst effect and the lag time. The secondary structure of ovalbumin was partially maintained in the solid state, and the ovalbumin was released under its native form.

Hydrous salts of 1-aminoethylidenediphosphonic acid and piperazidine: temperature induced reversible structural transformation in a humid environment

A series of hydrous salts constructed using AEDPH₄ and piperazidine (pip) were synthesized and structurally characterized. A reversible structural transformation circle is observed in single crystals of compounds 1–3.

Preparation of chitosan films using different neutralizing solutions to improve endothelial cell compatibility

The development of chitosan-based constructs for application in large-size defects or highly vascularized tissues is still a challenging issue. The poor endothelial cell compatibility of chitosan hinders the colonization of vascular endothelial cells in the chitosan-based constructs, and retards the establishment of a functional microvascular network following implantation. The aim of the present study is to prepare chitosan films with different neutralization methods to improve their endothelial cell compatibility. Chitosan salt films were neutralized with either sodium hydroxide (NaOH) aqueous solution, NaOH ethanol solution, or ethanol solution without NaOH. The physicochemical properties and endothelial cell compatibility of the chitosan films were investigated. Results indicated that neutralization with different solutions affected the surface chemistry, swelling ratio, crystalline conformation, nanotopography, and mechanical properties of the chitosan films. The NaOH ethanol solution-neutralized chitosan film (Chi-NaOH/EtOH film) displayed a nanofiber-dominant surface, while the NaOH aqueous solution-neutralized film (Chi-NaOH/H(2)O film) and the ethanol solution-neutralized film (Chi-EtOH film) displayed nanoparticle-dominant surfaces. Moreover, the Chi-NaOH/EtOH films exhibited a higher stiffness as compared to the Chi-NaOH/H(2)O and Chi-EtOH films. Endothelial cell compatibility of the chitosan films was evaluated with a human microvascular endothelial cell line, HMEC-1. Compared with the Chi-NaOH/H(2)O and Chi-EtOH films, HMECs cultured on the Chi-NaOH/EtOH films fully spread and exhibited significantly higher levels of adhesion and proliferation, with retention of the endothelial phenotype and function. Our findings suggest that the surface nanotopography and mechanical properties contribute to determining the endothelial cell compatibility of chitosan films. The nature of the neutralizing solutions can affect the physicochemical properties and endothelial cell compatibility of chitosan films. Therefore, selection of suitable neutralization methods is highly important for the application of chitosan in tissue engineering.

Theoretical investigation of hydrogen bonding effects on oxygen, nitrogen, and hydrogen chemical shielding and electric field gradient tensors of chitosan/HI salt

A density functional theory study has been carried out to calculate the (17)O, (15)N, (13)C, and (1)H chemical shielding as well as (17)O, (14)N, and (2)H electric field gradient tensors of chitosan/HI type I salt. These calculations were performed using the B3LYP functional and 6-311++G (d,p) and 6-31++G (d,p) basis sets. Calculated EFG and chemical shielding tensors were used to evaluate the (17)O, (14)N, and (2)H nuclear quadruple resonance, NQR, and (17)O, (15)N, (13)C, and (1)H nuclear magnetic resonance, NMR, parameters in the cluster model, which are in good agreement with the available experimental data. The difference in the isotropic shielding (sigma(iso)) and quadrupole coupling constant (C(Q)) between monomer and target molecule in the cluster was analyzed in detail. It was shown that both EFG and CS tensors are sensitive to hydrogen-bonding interactions, and calculating both tensors is an advantage. A different influence of various hydrogen bond types, N-Hcdots, three dots, centeredI, O-Hcdots, three dots, centeredI, and N-Hcdots, three dots, centeredO was observed on the calculated CS and EFG tensors. On the basis of this study, nitrogen and O-6 are the most important nuclei to confirm crystalline structure of chitosan/HI. These nuclei have large change in their CS and EFG tensors because of forming intermolecular hydrogen bonds. Moreover, the quantum chemical calculations indicated that the intermolecular hydrogen-bonding interactions play an essential role in determining the relative orientation of CS and EFG tensors of O-6 and nitrogen atoms in the molecular frame axes.

Effect of Addition of Water-Soluble Chitin on Amylose Film

Amylose films blended with chitosan, which were free from additives such as acid, salt, and plasticizer, were prepared by casting mixtures of an aqueous solution of an enzymatically synthesized amylose and that of water-soluble chitin (44.1% deacetylated). The presence of a small amount of chitin (less than 10%) increased significantly the permeability of gases (N2, O2, CO2, C2H4) and improved the mechanical parameters of amylose film; particularly, the elastic modulus and elongation of the blend films were larger than those of amylose or chitin films. No antibacterial activity was observed with either amylose or water-soluble chitin films. But amylose films having a small amount of chitin showed strong antibacterial action, suggesting a morphological change in water-soluble chitin on the film surface by blending with amylose molecule. These facts suggested the presence of a molecular complex of amylose and chitosan.

Three D structures of chitosan

Crystal structures of two polymorphs of chitosan, tendon (hydrated) and annealed (anhydrous) polymorphs, have been reported. In both crystals, chitosan molecule takes up similar conformation (Type I form) to each other, an extended two-fold helix stabilized by intramolecular O3-O5 hydrogen bond, which is also similar to the conformation of chitin or cellulose. Three chitosan conformations other than Type I form have been found in the crystals of chitosan-acid salts. In the salts with acetic and some other acids, called Type II salts, chitosan molecule takes up a relaxed two-fold helix composed of asymmetric unit of tetrasaccharide. This conformation seems to be unstable because no strong intramolecular hydrogen bond like Type I form. Type II crystal changes to the annealed polymorph of chitosan by a spontaneous water-removing action of the acid. Chitosan molecule in its hydrogen iodide salt prepared at low temperature takes a 4/1 helix with asymmetric unit of disaccharide. The fourth chitosan conformation was found to be a 5/3 helix in chitosan salts with medical organic acids having phenyl group such as salicylic or gentisic acids. Similar conformation of chitosan molecule in the aspirin (acetylsalicylic acid) salt was suggested by a solid-sate NMR measurement.

Plausible molecular and crystal structures of chitosan/HI type II salt

Chitosan/HI type II salt prepared from crab tendon was investigated by X-ray fiber diffraction. Two polymer chains and 16 iodide ions (I(-)) crystallized in a tetragonal unit cell with lattice parameters of a = b = 10.68(3), c (fiber axis) = 40.77(13) A, and a space group P4(1). Chitosan forms a fourfold helix with a 40.77 A fiber period having a disaccharide as the helical asymmetric unit. One of the O-3... O-5 intramolecular hydrogen bonds at the glycosidic linkage is weakened by interacting with iodide ions, which seems to cause the polymer to take the 4/1-helical symmetry rather than the extended 2/1-helix. The plausible orientations of two O-6 atoms in the helical asymmetric unit were found to be gt and gg. Two chains are running through at the corner and the center of the unit cell along the c-axis. They are linked by hydrogen bonds between N-21 and O-61 atoms. Two out of four independent iodide ions are packed between the corner chains while the other two are packed between the corner and center chains when viewing through the ab-plane. The crystal structure of the salt is stabilized by hydrogen bonds between these iodide ions and N-21, N-22, O-32, O-61, O-62 of the polymer chains.

Two different molecular conformations found in chitosan type II salts

The type II structure of chitosan acidic salts prepared from crab tendon in solid state was studied using an X-ray fiber diffraction technique together with the linked-atom least-squares (LALS) technique. The cylindrical Patterson method was applied to confirm the molecular conformation of the chitosan. It was shown that there are two different helical conformations for type II salts. One is the relaxed twofold helix having a tetrasaccharide as an asymmetric unit as found in chitosan.HCl salt, which was previously reported as a conformation of chitosan.HCOOH salt. The other is the fourfold helix having a disaccharide as an asymmetric unit newly found in chitosan.HI salt.