Monitoring nitrite, N-nitrosodiethanolamine, and mutagenicity in cutting fluids used in the metal industry

Towards commercial scale postcombustion capture of CO2 with monoethanolamine solvent: key considerations for solvent management and environmental impacts

Chemical absorption with aqueous amine solvents is the most advanced technology for postcombustion capture (PCC) of CO(2) from coal-fired power stations and a number of pilot scale programs are evaluating novel solvents, optimizing energy efficiency, and validating engineering models. This review demonstrates that the development of commercial scale PCC also requires effective solvent management guidelines to ensure minimization of potential technical and environmental risks. Furthermore, the review reveals that while solvent degradation has been identified as a key source of solvent consumption in laboratory scale studies, it has not been validated at pilot scale. Yet this is crucial as solvent degradation products, such as organic acids, can increase corrosivity and reduce the CO(2) absorption capacity of the solvent. It also highlights the need for the development of corrosion and solvent reclamation technologies, as well as strategies to minimize emissions of solvent and degradation products, such as ammonia, aldehydes, nitrosamines and nitramines, to the atmosphere from commercial scale PCC. Inevitably, responsible management of aqueous and solid waste will require more serious consideration. This will ultimately require effective waste management practices validated at pilot scale to minimize the likelihood of adverse human and environmental impacts from commercial scale PCC.

Summary of the findings from the exposure assessments for metalworking fluid mortality and morbidity studies

Since 1985, a number of North American researchers have evaluated the association between worker exposure to metalworking fluids (MWFs) and cancer mortality or respiratory morbidity. The studies have used different methods to measure the MWF aerosol concentration and to evaluate the exposures to the specific components of the MWF aerosol (bacteria, endotoxin, elements, metals, ethanolamines, polyaromatic hydrocarbons). This diversity of approaches makes comparison of study results difficult and has impeded the development of an occupational exposure limit (OEL) for metalworking fluids. This article summarizes the exposures measured in these North American epidemiologic studies by estimating their thoracic and inhalable MWF particulate levels. In addition, issues that must be resolved before a universal sampling and analysis method for MWF can be recommended are reviewed, including: the use of gravimetric versus extractable analysis; whether the analytical limit of detection can support a lower occupational exposure limit; if the volatile components of mineral oils should also be collected; and whether there are components of specific concern in MWFs that should be regulated separately. Finally, recommendations for future directions in MWF exposure assessment and control are suggested.

Monitoring airborne genotoxicants in the rubber industry using genotoxicity tests and chemical analyses

This research was designed to examine the presence of mutagenic/carcinogenic compounds in airborne pollutants in the rubber industry using an integrated chemical/biological approach. Inhalable airborne particulate matter (PM-10: <10 microm) was collected in four rubber factories using a high-volume sampler equipped with a cascade impactor for particle fractionation. The organic extracts of two different fractions (0.5-10 microm and <0.5 microm) were examined for mutagenicity with the Ames test and for in vitro DNA-damaging activity in human leukocytes by single-cell microgel electrophoresis (Comet assay). The extracts were also studied by gas chromatography/mass spectrometry (GC/MS) for polycyclic aromatic hydrocarbon (PAH) content. Nitrosamines in ambient air were sampled on cartridges and analysed by GC with a thermal energy analyser (TEA) detector. Airborne volatile genotoxins were monitored in situ using a clastogenicity plant test (Tradescantia/micronuclei test). The results showed that airborne particulates were mainly very fine (<0.5 microm) and that trace amounts of genotoxic nitrosamines (N-nitrosodimethylamine: 0.10-0.98 microg/m(3); N-nitrosomorpholine: 0.77-2.40 microg/m(3)) and PAH (total PAH: 0.34-11.35 microg/m(3)) were present in air samples. Some extracts, particularly those obtained from the finest fractions, were mutagenic with the Ames test and genotoxic with the Comet assay. In situ monitoring of volatile mutagens using the Tradescantia/micronuclei test gave positive results in two working environments. The results showed the applicability of this integrated chemical-biological approach for detecting volatile and non-volatile genotoxins and for monitoring genotoxic hazards in the rubber industry.

Biological monitoring of workers exposed to N-nitrosodiethanolamine in the metal industry

Biological monitoring of occupational hazards was performed in workers using cutting fluids containing N-nitrosodiethanolamine (NDELA). The study involved a group of 25 male subjects from some metal factories in central Italy who used cutting fluids with an NDELA content of > or = 5 mg/l (high-exposure group) and a group of 37 males exposed to cutting fluids with an NDELA content < 5 mg/l (low-exposure group). For comparison, we recruited a control group consisting of 37 subjects living in the same area. For all subjects, internal dose (urinary excretion of NDELA, mutagens, and thioethers), early biological effects (sister chromatid exchanges in blood peripheral lymphocytes), and urinary excretion of D-glucaric acid (DGA) as an endpoint product in the glucuronidation pathway were assessed. The results showed that only the workers using cutting fluids with NDELA concentrations of > or = 5 mg/l excreted trace amounts of NDELA in their urine. Urine excretion of mutagens was similar in the two exposure groups and in the controls. High-exposure subjects had a higher mean value of urinary thioethers than low-exposure and control subjects, but no differences were found in urinary DGA or lymphocyte sister chromatid exchange among the three groups. Smoking status increased the mean values of all the biomarkers, and coffee drinking was associated with urinary DGA excretion.