Biofilm and catheter-related bloodstream infections

Antibiotic lock therapy for the treatment of peripherally inserted central venous catheter-related bloodstream infection in patients with hematological malignancies: a single center retrospective study

Catheter-related bloodstream infections represent one of the most prevalent complications in patients with peripherally inserted central venous catheters (PICCs). The application of antibiotic lock therapy (ALT), particularly in patients with hematological malignancies, has not been well documented. We aim to share our experience on ALT for these patients and to evaluate its effectiveness and safety. All cases of patients with hematological malignancies who had PICC from January 2018 to October 2024 were retrospectively reviewed. Microbiologic data of PICC-related bloodstream infections (PRBSIs) were collected. A comparison was made between patients managed with ALT and those without it. Factors affecting PICC removal were also explored. A total of 45 patients experienced 67 episodes of PRBSIs, yielding an incidence rate of 2.98 per 1,000 PICC days. The median time of PRBSI onset was 42 days. Predominant pathogens included Gram-negative bacilli (49.3%) and Gram-positive cocci (35.8%). The catheter salvage rate was significantly higher at 76.5% when ALT was combined with systemic antibiotic therapy (SAT), compared to 51.5% for SAT alone (p = 0.033). 3 death events (3/34) compared with 4 death events (4/33) occurred in each therapeutic regimen (p = 0.709). Elevated procalcitonin levels (> 2ng/ml) and inadequate empirical therapy were risk factors for PICC removal; conversely, ALT served as a protective factor against it. ALT in combination with systemic antibiotics is a safe and effective approach for managing PRBSIs in patients with hematological malignancies, helping to avoid unnecessary catheter removal and could be considered in clinical practice when catheter retention is desired.

Unveiling the nanoworld of antimicrobial resistance: integrating nature and nanotechnology

A significant global health crisis is predicted to emerge due to antimicrobial resistance by 2050, with an estimated 10 million deaths annually. Increasing antibiotic resistance necessitates continuous therapeutic innovation as conventional antibiotic treatments become increasingly ineffective. The naturally occurring antibacterial, antifungal, and antiviral compounds offer a viable alternative to synthetic antibiotics. This review presents bacterial resistance mechanisms, nanocarriers for drug delivery, and plant-based compounds for nanoformulations, particularly nanoantibiotics (nAbts). Green synthesis of nanoparticles has emerged as a revolutionary approach, as it enhances the effectiveness, specificity, and transport of encapsulated antimicrobials. In addition to minimizing systemic side effects, these nanocarriers can maximize therapeutic impact by delivering the antimicrobials directly to the infection site. Furthermore, combining two or more antibiotics within these nanoparticles often exhibits synergistic effects, enhancing the effectiveness against drug-resistant bacteria. Antimicrobial agents are routinely obtained from secondary metabolites of plants, including essential oils, phenols, polyphenols, alkaloids, and others. Integrating plant-based antibacterial agents and conventional antibiotics, assisted by suitable nanocarriers for codelivery, is a potential solution for addressing bacterial resistance. In addition to increasing their effectiveness and boosting the immune system, this synergistic approach provides a safer and more effective method of tackling future bacterial infections.

Bacterial Communities and Their Role in Bacterial Infections

Since infections associated with microbial communities threaten human health, research is increasingly focusing on the development of biofilms and strategies to combat them. Bacterial communities may include bacteria of one or several species. Therefore, examining all the microbes and identifying individual community bacteria responsible for the infectious process is important. Rapid and accurate detection of bacterial pathogens is paramount in healthcare, food safety, and environmental monitoring. Here, we analyze biofilm composition and describe the main groups of pathogens whose presence in a microbial community leads to infection (Staphylococcus aureus, Enterococcus spp., Cutibacterium spp., bacteria of the HACEK, etc.). Particular attention is paid to bacterial communities that can lead to the development of device-associated infections, damage, and disruption of the normal functioning of medical devices, such as cardiovascular implants, biliary stents, neurological, orthopedic, urological and penile implants, etc. Special consideration is given to tissue-located bacterial biofilms in the oral cavity, lungs and lower respiratory tract, upper respiratory tract, middle ear, cardiovascular system, skeletal system, wound surface, and urogenital system. We also describe methods used to analyze the bacterial composition in biofilms, such as microbiologically testing, staining, microcolony formation, cellular and extracellular biofilm components, and other methods. Finally, we present ways to reduce the incidence of biofilm-caused infections.

A new dynamic in vitro model for evaluating antimicrobial activity against bacterial biofilms on central venous catheters

Central venous catheters (CVCs) are widely used for intravenous medication administration. However, biofilm formation along the catheter surface is the main most important cause of catheter-related bloodstream infections. Nowadays, several antimicrobial-coated catheters are available to prevent biofilm development. In this study, we introduced a new dynamic in vitro model to evaluate the antimicrobial activity against bacterial biofilms on CVCs. Rifampicin-minocycline-coated catheters and control catheters without antimicrobial component were assembled into the model to test the antimicrobial activity on external surface and internal surface. After 1 h irrigation of Staphylococcus epidermidis or Staphylococcus aureus preculture and 23 h irrigation of Trypticase Soy Broth, the viable adherent organism was collected and counted. The enumeration results showed that the number of bacteria attached to antibacterial catheter was significantly less than that of the control catheter, both on external surface (P < 0.05) and internal surface (P < 0.05). The results were further confirmed by the scanning electron microscopy. In conclusion, the dynamic in vitro model can be applied to evaluate the antimicrobial activity against bacterial biofilms grown on the external and internal surfaces of CVCs used in clinical practice.IMPORTANCEFor the first time, a new dynamic in vitro model was constructed to evaluate the antimicrobial activity against bacterial biofilms on central venous catheters (CVCs) on both external surface and internal surface. This model could be applied to evaluate the antimicrobial activity against bacterial biofilms not only on CVCs but also other types of catheters.

Microbiological analysis of tunneled hemodialysis catheters isolated from patients receiving hemodialysis in Saskatchewan

Aim: To compare the microbial communities inside hemodialysis catheters from symptomatic and asymptomatic patients to determine their differences.Materials & methods: Catheters (n = 41) were removed from patients in the Saskatchewan Health Authority over an 18-month period. The catheter section inside the body was flushed and the contents were evaluated using culture-dependent and culture-independent analysis.Results: All catheters were colonized by bacteria, with considerable overlap between groups based on microbial communities and the individual species detected. More Gram-negative species were detected by sequencing, whereas predominantly Gram-positive strains were cultured. Antibiotic resistance and biofilm formation was widespread and not correlated with either catheter group.Conclusion: Common pathogens were detected in each set of catheters, therefore predicting infections based on the microbiology is difficult.

Clinical Outcome of Patients with Escherichia coli Isolated from Catheter Lumens and/or Peripheral Blood Cultures: A Retrospective Analysis

BACKGROUND

Escherichia coli commonly causes catheter-related bloodstream infection (C-RBSI) in specific populations. The differential time to positivity (DTTP) technique is the recommended conservative procedure for diagnosing C-RBSIs.

METHODS

We conducted a retrospective study of episodes in which E. coli was isolated from catheter lumens obtained using the DTTP technique. Microbiological and clinical data were obtained based on the DTTP technique as either catheter colonization, C-RBSI, or non-C-RBSI.

RESULTS

A total of 89 catheter blood cultures were included, classified as follows: catheter colonization, 33.7%; C-RBSI, 9.0%; and non-C-RBSI, 57.3%. Only 15.7% of the catheters were withdrawn, with no positive catheter-tip cultures. We found no statistically significant differences in catheter type, antibiotic treatment, or clinical outcome among the groups, except for the frequency of catheter lock therapy or in the frequency of successful treatment. Mortality was associated with C-RBSI in only one patient.

CONCLUSION

E. coli bacteremia diagnosed by the DTTP technique was classified as non-catheter-related in most patients. As the majority of the catheters were retained, E. coli bacteremia could not be microbiologically confirmed as catheter-related by the catheter-tip culture. Future studies are needed to assess the profitability of the DTTP technique for diagnosing E. coli C-RBSIs.

Antibiotic lock solutions as adjunct therapy for catheter-related blood stream infections in pediatric hemodialysis patients

The predominant use of intravenous catheters as primary access type in the pediatric hemodialysis population is associated with an increased risk of catheter related blood stream infections. While strict adherence to catheter placement and long-term care guidelines have helped to decrease the incidence of these infections, blood stream infections remain an infection burden in pediatric patients with long term hemodialysis catheters. The formation of biofilms on the surfaces of these catheters has been shown to be a source of microbes causing blood stream infections. One of the strategies for preventing bacterial colonization, inhibiting microbial multiplication, and suppressing the seeding of these microbes from biofilms upon maturation, has been the use of antibiotic-based lock solutions in-between dialysis treatments. Although clinical guidelines for the use of antibiotic lock solutions are yet to be developed, available evidence suggests a beneficial role of antibiotic lock solutions in the management of catheter related blood stream infections. Additionally, a clear understanding of how biofilms are formed and their role in the pathogenesis of catheter related bloodstream infection will facilitate the development of solutions that can prevent biofilm formation and inhibit their multiplication, maturation and seeding into the bloodstream.

Polysaccharide-based hydrogels for medical devices, implants and tissue engineering: A review

Hydrogels are highly biocompatible biomaterials composed of crosslinked three-dimensional networks of hydrophilic polymers. Owing to their natural origin, polysaccharide-based hydrogels (PBHs) possess low toxicity, high biocompatibility and demonstrate in vivo biodegradability, making them great candidates for use in various biomedical devices, implants, and tissue engineering. In addition, many polysaccharides also show additional biological activities such as antimicrobial, anticoagulant, antioxidant, immunomodulatory, hemostatic, and anti-inflammatory, which can provide additional therapeutic benefits. The porous nature of PBHs allows for the immobilization of antibodies, aptamers, enzymes and other molecules on their surface, or within their matrix, potentiating their use in biosensor devices. Specific polysaccharides can be used to produce transparent hydrogels, which have been used widely to fabricate ocular implants. The ability of PBHs to encapsulate drugs and other actives has been utilized for making neural implants and coatings for cardiovascular devices (stents, pacemakers and venous catheters) and urinary catheters. Their high water-absorption capacity has been exploited to make superabsorbent diapers and sanitary napkins. The barrier property and mechanical strength of PBHs has been used to develop gels and films as anti-adhesive formulations for the prevention of post-operative adhesion. Finally, by virtue of their ability to mimic various body tissues, they have been explored as scaffolds and bio-inks for tissue engineering of a wide variety of organs. These applications have been described in detail, in this review.

Understanding the diagnosis of catheter-related bloodstream infection: real-time monitoring of biofilm growth dynamics using time-lapse optical microscopy

Background

The differential time to positivity (DTTP) technique is recommended for the conservative diagnosis of catheter-related bloodstream infection (C-RBSI). The technique is based on a 120-minute difference between microbial growth in blood drawn through the catheter and blood drawn through a peripheral vein. However, this cut-off has failed to confirm C-RBSI caused by Candida spp. and Staphylococcus aureus.

Objective

We hypothesized that the biofilm of both microorganisms disperses faster than that of other microorganisms and that microbial load is rapidly equalized between catheter and peripheral blood. Therefore, our aim was to compare the biofilm dynamics of various microorganisms.

Methods

Biofilm of ATCC strains of methicillin-resistant Staphylococcus epidermidis, methicillin-susceptible S. aureus, Enterococcus faecalis, Escherichia coli and Candida albicans was grown on silicon disks and analyzed using time-lapse optical microscopy. The time-lapse images of biofilms were processed using ImageJ2 software. Cell dispersal time and biofilm thickness were calculated.

Results

The mean (standard deviation) dispersal time in C. albicans and S. aureus biofilms was at least nearly 3 hours lower than in biofilm of S. epidermidis, and at least 15 minutes than in E. faecalis and E. coli biofilms.

Conclusion

Our findings could explain why early dissemination of cells in C. albicans and S. aureus prevents us from confirming or ruling out the catheter as the source of the bloodstream infection using the cut-off of 120 minutes in the DTTP technique. In addition, DTTP may not be sufficiently reliable for E. coli since their dispersion time is less than the cut-off of 120 minutes.

Promising Materials in the Fight against Healthcare-Associated Infections: Antibacterial Properties of Chitosan-Polyhedral Oligomeric Silsesquioxanes Hybrid Hydrogels

New technologies and materials could help in this fight against healthcare-associated infections. As the majority of these infections are caused by antibiotic-resistant bacteria, the development of materials with intrinsic antibacterial properties is a promising field of research. We combined chitosan (CS), with antibacterial properties, with polyhedral oligomeric silsesquioxanes (POSS), a biocompatible polymer with physico-chemical, mechanical, and rheological properties, creating a hydrogel using cross-linking agent genipin. The antibacterial properties of CS and CS-POSS hydrogels were investigated against nosocomial Gram-positive and Gram-negative bacteria both in terms of membrane damage and surface charge variations, and finally, the anti-biofilm property was studied through confocal microscopy. Both materials showed a good antibacterial capacity against all analyzed strains, both in suspension, with % decreases between 36.36 and 73.58 for CS and 29.86 and 66.04 for CS-POSS, and in plates with % decreases between 55.29 and 78.32 and 17.00 and 53.99 for CS and CS-POSS, respectively. The treated strains compared to the baseline condition showed an important membrane damage, which also determined a variation of surface charges, and finally, for both hydrogels, a remarkable anti-biofilm property was highlighted. Our findings showed a possible future use of these biocompatible materials in the manufacture of medical and surgical devices with intrinsic antibacterial and anti-biofilm properties.

Distinct bacterial population dynamics and disease dissemination after biofilm dispersal and disassembly

Microbial communities that form surface-attached biofilms must release and disperse their constituent cells into the environment to colonize fresh sites for continued survival of their species. For pathogens, biofilm dispersal is crucial for microbial transmission from environmental reservoirs to hosts, cross-host transmission, and dissemination of infections across tissues within the host. However, research on biofilm dispersal and its consequences in colonization of fresh sites remain poorly understood. Bacterial cells can depart from biofilms via stimuli-induced dispersal or disassembly due to direct degradation of the biofilm matrix, but the complex heterogeneity of bacterial populations released from biofilms rendered their study difficult. Using a novel 3D-bacterial "biofilm-dispersal-then-recolonization" (BDR) microfluidic model, we demonstrated that Pseudomonas aeruginosa biofilms undergo distinct spatiotemporal dynamics during chemical-induced dispersal (CID) and enzymatic disassembly (EDA), with contrasting consequences in recolonization and disease dissemination. Active CID required bacteria to employ bdlA dispersal gene and flagella to depart from biofilms as single cells at consistent velocities but could not recolonize fresh surfaces. This prevented the disseminated bacteria cells from infecting lung spheroids and Caenorhabditis elegans in on-chip coculture experiments. In contrast, EDA by degradation of a major biofilm exopolysaccharide (Psl) released immotile aggregates at high initial velocities, enabling the bacteria to recolonize fresh surfaces and cause infections in the hosts efficiently. Hence, biofilm dispersal is more complex than previously thought, where bacterial populations adopting distinct behavior after biofilm departure may be the key to survival of bacterial species and dissemination of diseases.

Microbial Biofilms: Applications, Clinical Consequences, and Alternative Therapies

Biofilms are complex communities of microorganisms that grow on surfaces and are embedded in a matrix of extracellular polymeric substances. These are prevalent in various natural and man-made environments, ranging from industrial settings to medical devices, where they can have both positive and negative impacts. This review explores the diverse applications of microbial biofilms, their clinical consequences, and alternative therapies targeting these resilient structures. We have discussed beneficial applications of microbial biofilms, including their role in wastewater treatment, bioremediation, food industries, agriculture, and biotechnology. Additionally, we have highlighted the mechanisms of biofilm formation and clinical consequences of biofilms in the context of human health. We have also focused on the association of biofilms with antibiotic resistance, chronic infections, and medical device-related infections. To overcome these challenges, alternative therapeutic strategies are explored. The review examines the potential of various antimicrobial agents, such as antimicrobial peptides, quorum-sensing inhibitors, phytoextracts, and nanoparticles, in targeting biofilms. Furthermore, we highlight the future directions for research in this area and the potential of phytotherapy for the prevention and treatment of biofilm-related infections in clinical settings.

Auranofin coated catheters inhibit bacterial and fungal biofilms in a murine subcutaneous model

Microbe entry through catheter ports can lead to biofilm accumulation and complications from catheter-related bloodstream infection and ultimately require antimicrobial treatment and catheter replacement. Although strides have been made with microbial prevention by applying standardized antiseptic techniques during catheter implantation, both bacterial and fungal microbes can present health risks to already sick individuals. To reduce microbial adhesion, murine and human catheters were coated with polyurethane and auranofin using a dip coating method and compared to non-coated materials. Upon passage of fluid through the coated material in vitro, flow dynamics were not impacted. The unique antimicrobial properties of the coating material auranofin has shown inhibitory activity against bacteria such as Staphylococcus aureus and fungi such as Candida albicans. Auranofin coating on catheters at 10mg/mL reduced C. albicans accumulation in vitro from 2.0 x 10⁸ to 7.8 x 10⁵ CFU for mouse catheters and from 1.6 x 10⁷ to 2.8 x 10⁶ for human catheters, showing an impact to mature biofilms. Assessment of a dual microbe biofilm on auranofin-coated catheters resulted in a 2-log reduction in S. aureus and a 3-log reduction in C. albicans compared to uncoated catheters. In vivo assessment in a murine subcutaneous model demonstrated that catheters coated with 10 mg/mL auranofin reduced independent S. aureus and C. albicans accumulation by 4-log and 1-log, respectively, compared to non-coated catheters. In conclusion, the auranofin-coated catheters demonstrate proficiency at inhibiting multiple pathogens by decreasing S. aureus and C. albicans biofilm accumulation.

Clinical Escherichia coli: From Biofilm Formation to New Antibiofilm Strategies

Escherichia coli is one of the species most frequently involved in biofilm-related diseases, being especially important in urinary tract infections, causing relapses or chronic infections. Compared to their planktonic analogues, biofilms confer to the bacteria the capacity to be up to 1000-fold more resistant to antibiotics and to evade the action of the host’s immune system. For this reason, biofilm-related infections are very difficult to treat. To develop new strategies against biofilms, it is important to know the mechanisms involved in their formation. In this review, the different steps of biofilm formation in E. coli, the mechanisms of tolerance to antimicrobials and new compounds and strategies to combat biofilms are discussed.