Production of Lipase by Pseudomonas Aeruginosa JCM5962(T) Under Semi-Solid State Fermentation: Potential use of Azadirachta Indica (Neem) Oil Cake

Preparation, purification, and biochemical of fat-degrading bacterial enzymes from pig carcass compost and its application

BACKGROUND

A lot of kitchen waste oil is produced every day worldwide, leading to serious environmental pollution. As one of the environmental protection methods, microorganisms are widely used treating of various wastes. Lipase, as one of the cleaning agents can effectively degrade kitchen waste oil. The composting process of pig carcasses produces many lipase producing microorganisms, rendering compost products an excellent source for isolating lipase producing microorganisms. To our knowledge, there are no reports isolating of lipase producing strains from the high temperature phase of pig carcass compost.

METHODOLOGY

Lipase producing strains were isolated using a triglyceride medium and identified by 16S rRNA gene sequencing. The optimal fermentation conditions for maximum lipase yield were gradually optimized by single-factor tests. The extracellular lipase was purified by ammonium sulfate precipitation and Sephadex G-75 gel isolation chromatography. Amino acid sequence analysis, structure prediction, and molecular docking of the purified protein were performed. The pure lipase's enzymatic properties and application potential were evaluated by characterizing its biochemical properties.

RESULTS

In this study, a lipase producing strain of Bacillus sp. ZF2 was isolated from pig carcass compost products, the optimal fermentation conditions of lipase: sucrose 3 g/L, ammonium sulfate 7 g/L, Mn2+ 1.0 mmol/L, initial pH 6, inoculum 5%, temperature 25 ℃, and fermentation time 48 h. After purification, the specific activity of the purified lipase reached 317.59 U/mg, a 9.78-fold improvement. Lipase had the highest similarity to the GH family 46 chitosanase and molecular docking showed that lipase binds to fat via two hydrogen bonds at Gln146 (A) and Glu203 (A). Under different conditions (temperature, metal ions, organic solvents, and surfactants), lipase can maintain enzymatic activity. Under different types of kitchen oils, lipase has low activity only for 'chicken oil', in treating other substrates, the enzyme activity can exceed 50%.

CONCLUSIONS

This study reveals the potential of lipase for waste oil removal, and future research will be devoted to the application of lipase.

Optimization and characterization of alkaliphilic lipase from a novel Bacillus cereus NC7401 strain isolated from diesel fuel polluted soil

Five Bacillus cereus strains including B. cereus AVP12, B. cereus NC7401, B. cereus BDBCO1, B. cereus JF70 and B. specie JL47 isolated from the diesel fuel polluted soil adhered to the roots of Tagetes minuta were screened for lipase production with phenol red agar method. B. cereus NC7401 strain successfully expressing and secreting lipase with maximal lipolytic activity was subjected to a submerged fermentation process with five different carbon (starch, glucose, maltose, fructose, and lactose) and five different nitrogen (tryptone, ammonium nitrate, peptone, urea, yeast extract) sources to produce lipase enzyme. Maximum enzyme activity was found with starch (30.6 UmL-1), maltose (40 UmL-1), and tryptone (38.6 UmL-1), and the lipases produced using these sources were named lipase A, B, and C respectively. The total protein content of 8.56, 8.86, and 2.75 μg mL-1 were obtained from B. cereus NC7401 cultured using starch, maltose, and tryptone respectively. Lipase was stable between temperature range 30–80°C and pH 5–10 whereas optimally active at 55°C and pH 8.0. The enzyme was relatively stable for 10 days at 4°C and its optimum reaction time with the substrate was 30 minutes. It was tolerant to 1.5% (v/v) methanol as an organic solvent, 1.5% (v/v) Triton X-100 as a media additive and 1.5% (w/v) Ni2+ as a metal ion. SDS, n-hexane, and Ag+ inhibited lipolytic activity. Oil stains were removed from cotton fabric which showed oil removal efficiency enhancement in the presence of a lipase. Fat hydrolysis of 20, 24, and 30% was achieved following 6 hours of incubation of the fat particles with lipase A, B, and C respectively at a concentration of 20 mg mL-1. To as best of our knowledge, this study on lipases extracted from bacteria of Azad Kashmir, Pakistan origin has never been reported before.

Microbial Degradation and Value Addition to Food and Agriculture Waste

Food and agriculture waste (FAW) is a serious problem that is increasing globally. Wastage of raw materials or processed food due to various man-made activities is huge. This solid waste which is either being discarded by humans in their daily activities or an obligatory residue of agricultural processes is severely harming our environment. This becomes a major concern in densely populated agri-based countries, like India, China, and the USA. It is strongly debated that such issues need to be addressed very emphatically for sustainable development of ourselves and our surroundings. Lots of economic benefits can be obtained by reducing the food loss or converting the agricultural waste into useful products and these advantages can be in the form of better food security, reduced production cost, biodegradable products, and environment sustainability with cleaner options to reduce the ever-increasing global problem of garbage and waste management. Proper management of these substances can considerably lessen the risks to individual health. Reprocessing of waste is of great advantage as FAW has many components which may form an available resource to be converted to another useful product. Several approaches have been made for converting food waste into fruitful products. Bioconversion being the most prominent approach is helping us in a major way to overcome the problem of FAW. Microorganisms are at the forefront of this and have been extensively explored for their bioconversion potential. The present work focuses on the current state of food and agriculture waste and their valorization approaches. Through extensive literature review, we have highlighted and discussed the potential of microorganisms in bioconversion of waste, major types of functional ingredients derived during the process, and potential constraints in implementation of such state-of-the-art technology at industrial scale. The review also gives a brief technical overview of the conversion of waste products into energy generation and biofuels.

Role of acid/alkali-treatment in primary sludge anaerobic fermentation: Insights into microbial community structure, functional shifts and metabolic output by high-throughput sequencing

This study aimed to investigate the effect of acid- or alkali-treatment on volatile fatty acids (VFAs) production and microbiological mechanism during primary sludge anaerobic fermentation. Seven fermentation experiments were conducted at different pH (3-12). Results showed that the optimal pH was 10 for accumulation of VFAs. High-throughput sequencing results indicated that acid and alkali treatment could inhibit Erysipelotrichaceae_UCG-004 and norank_p_Aminicenantes, instead of promoting Pseudomonas and Tissierella at acidic and alkaline condition, respectively. Besides, molecular ecological networks (MENs) analysis and multivariate canonical correspondence analysis (CCA) revealed that the microbial community interactions are significant different between acid and alkali treatment groups, and acetic acid was the most vital factor in the distinct bacterial community assemblages. Predictive functional profiling using marker gene sequences found that amino acid transport and metabolism was the most abundant metabolic type with 8.43-9.41%, and acid- and alkali-treatment did not benefit Stickland reaction.