Applicability of Heavy Ion Beam Probing for Stellarator W7-X

Conceptual design of a heavy ion beam probe diagnostic for the Wendelstein 7-X Stellarator

This article describes the current state of the design of the heavy ion beam probe (HIBP) for Wendelstein 7-X (W7-X). It will be the first HIBP diagnostic on an optimized stellarator and is designed to study electric fields and ion scale turbulence in all W7-X reference magnetic configurations. The use of an existing 2 MV accelerator, located outside of the torus hall, results in the need for a circuitous primary beamline. This increases the complexity of the ion optics design to deliver a focused beam to the plasma. To access most of the magnetic configuration space of W7-X, the secondary beamline and an energy analyzer are designed to pivot, thereby redirecting a wider range of secondary beam trajectories. Signal level estimates indicate that the equilibrium potential can be measured at all radii and that the radial coverage for potential and density fluctuations measurements depends on the plasma density.

Evolution of Heavy Ion Beam Probing from the Origins to Study of Symmetric Structures in Fusion Plasmas

The overview discusses development of the unique fusion plasma diagnostics—Heavy Ion Beam Probing (HIBP) in application to toroidal magnetic plasma devices. The basis of the HIBP measurements of the plasma electric potential and processing of experimental data are considered. Diagnostic systems for probing plasma in tokamaks TM-4, TJ-1, TUMAN-3M and T-10, stellarators WEGA, TJ-II and Uragan-2M are presented. Promising results of the HIBP projects for various existing modern machines, such as TCV, TCABR, MAST, COMPASS, GLOBUS-M2, T-15 MD and W7-X and the international fusion tokamak reactor ITER are given. Results from two machines with similar size and plasma parameters, but with different types of the magnetic con-figuration: axisymmetric tokamak T-10 and helically symmetric stellarator TJ-II are compared. The results of studies of stationary potential profiles and oscillations in the form of quasimonochromatic and broadband fluctuations, turbulent particle flux, fluctuations of density and poloidal magnetic field are presented. The properties of symmetric structures—zonal flows and geodesic acoustic modes of plasma oscillations as well as Alfvén Eigenmodes excited by fast particles from neutral beam injection heating are described. General trends in the behavior of electric potential and turbulence in magnetized fusion plasmas are revealed.

Improvement in the spatial resolution of heavy ion beam probe measurements through application of ion optics

A technique for more accurately modeling and improving the spatial resolution of heavy ion beam probe measurements is described. We use a set of particle trajectories to numerically determine the focusing properties of a complicated three-dimensional magnetic field and characterize these properties with a transfer matrix. We then modify the transfer matrix approach of traditional ion optics to include a parameter that describes the ionization location of the detected ions. The ion optics model calculated using this technique enables a more accurate description of the particle trajectories than previously feasible. The model also allows one to easily determine an initial beam focus that could be used during experimental operation to optimize the spatial resolution of measurements. The technique has been applied to the design of a heavy ion beam probe diagnostic for the Wendelstein 7-X stellarator, and improvements in the modeled spatial resolution by a factor of about 2 over previous estimates are possible. The improved spatial resolution will enable measurements of plasma fluctuations with smaller wavelengths than would otherwise be possible.