Methacrylate-Based Polymeric Sorbents for Recovery of Metals from Aqueous Solutions

The industrialization and urbanization expansion have increased the demand for precious and rare earth elements (REEs). In addition, environmental concerns regarding the toxic effects of heavy metals on living organisms imposed an urgent need for efficient methods for their removal from wastewaters and aqueous solutions. The most efficient technique for metal ions removal from wastewaters is adsorption due to its reversibility and high efficiency. Numerous adsorbents were mentioned as possible metal ions adsorbents in the literature. Chelating polymer ligands (CPLs) with adaptable surface chemistry, high affinity towards targeted metal ions, high capacity, fast kinetics, chemically stable, and reusable are especially attractive. This review is focused on methacrylate-based magnetic and non-magnetic porous sorbents. Special attention was devoted to amino-modified glycidyl methacrylate (GMA) copolymers. Main adsorption parameters, kinetic models, adsorption isotherms, thermodynamics of the adsorption process, as well as regeneration of the polymeric sorbents were discussed.

Enhancement of Cr(VI) ion adsorption by two-step grafting of methacrylamide (MAAm) and 2-(dimethylamino)ethyl methacrylate (DMAEMA) onto polyethylene plate

Polyethylene (PE) plates grafted with a neutral hydrophilic monomer, methacrylamide (MAAm), and a cationic monomer, 2-(dimethylamino)ethyl methacrylate (DMAEMA), (PE-g-PMAAm)-g-PDMAEMA plates, were prepared by the two-step photografting. The Cr(VI) ion adsorption of the resultant (PE-g-PMAAm)-g-PDMAEMA plates was investigated as a function of the initial pH value, temperature, and grafted amounts of PMAAm and PDMAEMA. The adsorption capacity of the (PE-g-PMAAm)-g-PDMAEMA plates had the maximum at the initial pH value of 3.0 and the initial adsorption rate increased with the temperature and increased with the amount of grafted DMAEMA. This result suggests that protonated dimethylamino groups present in the inside of the grafted layer are increasingly involved in the Cr(VI) ion adsorption by the increase in the water absorptivity through the formation of the intermediate grafted layer of PMAAm. The maximum adsorption ratio of 0.510 was obtained for a (PE-g-PMAAm)-g-PDMAEMA plate with G_MAAm = 30 μmol/cm² and G_DMAEMA = 1.7 μmol/cm². The maximum adsorption capacity obtained in this study was comparable to or higher than those of other adsorbents for Cr(VI) ions. The adsorption behaviour obeyed the pseudo-second order kinetic model and was well described by the Langmuir isotherm model, suggesting that the adsorption of Cr(VI) ions occurs through the electrostatic interaction between protonated dimethylamino groups and HCrO4- ions. Cr(VI) ions were successfully desorbed in such eluents as NaCl, NaCl containing NaOH, NH₄Cl, NH₄Cl containing NaOH, and NaOH and (PE-g-PMAAm)-g-PDMAEMA plates were repeatedly used without considerable loss in the adsorption capacity.

Diethylenetriaminepentaacetic acid-thiourea-modified magnetic chitosan for adsorption of hexavalent chromium from aqueous solutions

Chromium pollution is a serious environmental problem given that like most heavy metals, Cr tends to persist and accumulate in the environment. In this study, diethylenetriaminepentaacetic acid-thiourea-modified magnetic chitosan (DTCS-Fe₃O₄) was synthesized for use as an adsorbent for Cr(VI) removal from aqueous solutions. The effects of various treatment conditions on the Cr(VI) adsorption performance of DTCS-Fe₃O₄ composite as well as the kinetics were elucidated. Moreover, by observing the structure and morphology of DTCS-Fe₃O₄, the possible Cr(VI) adsorption mechanism was proposed. DTCS-Fe₃O₄ exhibited a maximum adsorption capacity of 321.3 ± 6.0 mg g^-1. Further, the adsorption process, which followed the Langmuir model for monolayer adsorption, was predominantly governed by chemical adsorption, and could be fitted using the pseudo-second-order kinetics model. Furthermore, given its ease of preparation, low cost, and remarkable performance, it is expected that the DTCS-Fe₃O₄ composite would find wide practical application in the removal of toxic Cr(VI) from wastewater.

Hexavalent Cr ion adsorption and desorption behaviour of expanded poly(tetrafluoro)ethylene films grafted with 2-(dimethylamino)ethyl methacrylate

A new polymeric adsorbent for Cr(VI) ions based on an expanded poly(tetrafluoroethylene) (ePTFE) film was prepared by the combined use of the pretreatment with oxygen plasma and photografting of 2-(dimethylamino)ethyl methacrylate (DMAEMA). The grafting of DMAEMA was characterized by XPS and FT-IR spectroscopic measurements. The adsorption behaviour of DMAEMA-grafted ePTFE (ePTFE-g-PDMAEMA) films was investigated as a function of the experimental parameters, such as the initial pH value, temperature, and grafted amount. The adsorption capacity and initial adsorption rate had the maximum values at the initial pH value of 3.0. On the other hand, the adsorption capacity became almost constant at temperatures higher than 30°C, although the adsorption rate increased over the temperature. The adsorption behaviour obeyed the pseudo-second-order kinetic model and well expressed by the Langmuir isotherm equation with higher correlation coefficients. These results indicate that the adsorption of Cr(VI) ions occurs through the electrostatic interaction between protonated dimethylamino groups on a grafted PDMAEMA chain and HCrO4- ions. Cr(VI) ions were successfully desorbed from Cr(VI)-loaded ePTFE-g-PDMAEMA films in the eluents, such as NaCl at 0.50 M, NH₄Cl at 0.50M, and NaOH at 1.0 mM, and ePTFE-g-PDMAEMA films were repeatedly used for adsorption of Cr(VI) ions without appreciable loss in the adsorption capacity. It should be noted that Cr(VI) ion adsorptivity with a high initial rate was conferred to the ePTFE films. The results obtained in this study emphasize that ePTFE-g-PDMAEMA films can be applied as an adsorbent for Cr(VI) ions.

Characteristics of natural biopolymers and their derivative as sorbents for chromium adsorption: a review

Abstract

Chromium is widely used in industry, and improper disposal of wastewater and industrial residues containing excessive chromium can contaminate water and soil, endangering both environmental and human health. Natural biopolymers and their derivatives have been investigated for removal of chromium (Cr) from wastewater. Cellulose, lignin, tannin, chitin, chitosan, and polypeptides are abundant in nature, and have high potential as adsorbents due to their easy access, low cost, and the recyclability of the captured heavy metals. In order to improve their mechanical strength, recyclability, specific surface area, binding site number, and adsorption rate as adsorbents, native materials have also been modified. This review discusses the source of chromium contamination and the main species of interest, as well as their toxicity. The structures of the aforementioned biopolymers were analyzed, and the adsorption mechanism of chromium and the main influencing factors on this process are discussed. The modification methods of various adsorbents and their adsorption effects on chromium are also detailed, and the developmental direction of research on the use of biopolymer adsorption remediation to control chromium contamination is discussed.

Graphical abstract

Recent advances in hexavalent chromium removal from aqueous solutions by adsorptive methods

Chromium exists mainly in two forms in environmental matrices, namely, the hexavalent (Cr(vi)) and trivalent (Cr(iii)) chromium. While Cr(iii) is a micronutrient, Cr(vi) is a known carcinogen, and that warrants removal from environmental samples. Amongst the removal techniques reported in the literature, adsorption methods are viewed as superior to other methods because they use less chemicals; consequently, they are less toxic and easy to handle. Mitigation of chromium using adsorption methods has been achieved by exploiting the physical, chemical, and biological properties of Cr(vi) due to its dissolution tendencies in aqueous solutions. Many adsorbents, including synthetic polymers, activated carbons, biomass, graphene oxide, and nanoparticles as well as bioremediation, have been successfully applied in Cr(vi) remediation. Initially, adsorbents were used singly in their natural form, but recent literature shows that more composite materials are generated and applied. This review focused on the recent advances, insights, and project future directions for these adsorbents as well as compare and contrast the performances achieved by the mentioned adsorbents and their variants.

Oxygen Vacancy Enhanced Photoreduction Cr(VI) on Few-Layers BiOBr Nanosheets

2D nanomaterials, with unique structural and electronic features, had been demonstrated as excellent photocatalysts, whose catalytic properties could be tunable with surface defect engineering. In this work, few-layer BiOBr nanosheets with oxygen vacancies (BiOBr-Ov) have been fabricated by a simple solvothermal reaction with the help of ethylene glycol. The obtained BiOBr-Ov exhibited the superior photocatalytic performance with a complete reduction of Cr(VI) (20 mg/L) within 12 min by visible light irradiation. Moreover, Cr(VI) with a high concentration (such as 30 mg/L) only requires 2 min to be photoreduced completely under solar light irradiation. The enhanced photocatalytic performance is contributed to the existence of oxygen vacancies. It has been proved by the results of electrochemical impedance and photocurrent that oxygen vacancies can effectively suppress recombination of photogenerated carriers.

Green sample preparation of complex matrices: towards sustainable separations of organic compounds based on the biorefinery concept

The development and application of green analytical techniques aiming at the sample preparation of complex matrices for the study of organic compounds have been growing considerably over the last 15 years. Miniaturisation, automation and solventless techniques are gaining importance in this field, associated to others, as is the case of metrics. However, the unreflected use of the so-called green analytical techniques “might lead to doing the same things better, rather than rethinking solutions altogether”. Some limits and potentialities of the green sample preparation towards sustainable separations of organic compounds using the biorefinery concept will be also discussed in this paper, a promising biobased route that can integrate sustainable extraction and purification processes in a whole complete circular unity.