Evanescent-wave holography by use of surface-plasmon resonance

Two-photon polymerization for 3D biomedical scaffolds: Overview and updates

The needs for high-resolution, well-defined and complex 3D microstructures in diverse fields call for the rapid development of novel 3D microfabrication techniques. Among those, two-photon polymerization (TPP) attracted extensive attention owing to its unique and useful characteristics. As an approach to implementing additive manufacturing, TPP has truly 3D writing ability to fabricate artificially designed constructs with arbitrary geometry. The spatial resolution of the manufactured structures via TPP can exceed the diffraction limit. The 3D structures fabricated by TPP could properly mimic the microenvironment of natural extracellular matrix, providing powerful tools for the study of cell behavior. TPP can meet the requirements of manufacturing technique for 3D scaffolds (engineering cell culture matrices) used in cytobiology, tissue engineering and regenerative medicine. In this review, we demonstrated the development in 3D microfabrication techniques and we presented an overview of the applications of TPP as an advanced manufacturing technique in complex 3D biomedical scaffolds fabrication. Given this multidisciplinary field, we discussed the perspectives of physics, materials science, chemistry, biomedicine and mechanical engineering. Additionally, we dived into the principles of tow-photon absorption (TPA) and TPP, requirements of 3D biomedical scaffolders, developed-to-date materials and chemical approaches used by TPP and manufacturing strategies based on mechanical engineering. In the end, we draw out the limitations of TPP on 3D manufacturing for now along with some prospects of its future outlook towards the fabrication of 3D biomedical scaffolds.

Effects of Electrolyte on Laser-Induced Periodic Surface Structures with Picosecond Laser Pulses

Short-pulsed laser-induced periodic surface structures (SPLIPSSs) have the possibility to control tribology, wettability and biocompatibility. Nevertheless, the optimal structure depends on each functionality, which has not been clarified. The hybrid process with a short-pulsed laser and electrochemical machining (SPLECM) is, then, proposed to fabricate micro/nano hybrid structures and to modify the surface composition for providing high functionalities with material surfaces. Electrochemical machining is a well-established micro-elution and deposition method with noncontact between a workpiece and a tool. In this study, the effects of electrolytes on SPLIPSSs were investigated experimentally by the picosecond laser irradiation on 304 stainless steel substrates in various electrolytes. The geometry of SPLIPSSs depended on the types and the concentration of electrolytes. In the case of copper nitrate solution and copper sulfate solution, LIPSSs and spheroidization of copper were obtained. This study demonstrated the possibility of SPLECM to fabricate micro/nano structures and to control surface composition.

Surface-Plasmon Holography

Holography was originally invented for the purpose of magnifying electron microscopic images without spherical aberration and has been applied to photography for recording and reconstructing three-dimensional objects. Although it has been attracting scientists and ordinary people in the world, it is still a technology in science fiction movies. In this review, we discuss a new version of holography that uses surface plasmons on thin metal film. We discuss conventional holography and its drawbacks, such as overlapping of ghost and background due to the contribution of unnecessary diffraction and monochromacy for avoiding the unwanted diffraction components of different colors. Surface-plasmon holography is a version of near-field holography to overcome drawbacks of conventional holography. Comparison with conventional and volume holography for color reconstruction is discussed in reciprocal lattice space. Localized mode of surface plasmons and meta-surface holography are also reviewed, and feature perspectives and issues are discussed.

Holographic metalens for switchable focusing of surface plasmons

Surface plasmons polaritons (SPPs) are light-like waves confined to the interface between a metal and a dielectric. Excitation and control of these modes requires components such as couplers and lenses. We present the design of a new lens based on holographic principles. The key feature is the ability to switchably control SPP focusing by changing either the incident wavelength or polarization. Using phase-sensitive near-field imaging of the surface plasmon wavefronts, we have observed their switchable focusing and steering as the wavelength or polarization is changed.

Holographic optical metasurfaces: a review of current progress

In this article, we review recent developments in the field of surface electromagnetic wave holography. The holography principle is used as a tool to solve an inverse engineering problem consisting of designing novel plasmonic interfaces to excite either surface waves or free-space beams with any desirable field distributions. Leveraging on the new nanotechnologies to carve subwavelength features within the large diffracting apertures of conventional holograms, it is now possible to create binary holographic interfaces to shape both amplitude phase and polarization of light. The ability of the new generation of ultrathin and compact holographic optical devices to fully address light properties could find widespread applications in photonics.

Color selectivity of surface-plasmon holograms illuminated with white light

By using the optical frequency dependence of surface-plasmon polaritons, color images can be reconstructed from holograms illuminated with white light. We report details on the color selectivity of the color holograms. The selectivity is tuned by the thickness of a dielectric film covering a plasmonic metal film. When the dielectric is SiO(2) and the metal is silver, the appropriate thicknesses are 25 and 55 nm, respectively. In terms of spatial color uniformity, holograms made of silver-film corrugations are better than holograms recorded on photographic film on a flat silver surface.

Multi-focus plasmonic lens design based on holography

Multi-focus plasmonic lens with metallic nanoslits of variant widths have great potential applications in optical interconnection, integrated optics and nanophotonics. But the design method with simulated annealing algorithm or Yang-Gu algorithm requires complex calculation and multi focuses are limited to be set on the same output plane. In this paper, we propose a design method based on holography. The desired light field distribution and the incident plane wave can be treated as object wave and reference wave, respectively. So the calculation is relative simple and multi focuses can be located in different output plane. Numerical simulation of multi-focus lens design is performed through finite-difference time-domain (FDTD) method and the result confirms the feasibility of our method.

Investigation of LPG-SPR sensors using the finite element method and eigenmode expansion method

As compared to the well-known traditional couple-mode theory, in this study, we proposed a visual, graphical, and simple numerical simulation method for long-period fiber-grating surface-plasmon-resonance (LPG-SPR) sensors. This method combines the finite element method and the eigenmode expansion method. The finite element method was used to solve for the guided modes in fiber structures, including the surface plasmon wave. The eigenmode expansion method was used to calculate the power transfer phenomenon of the guided modes in the fiber structure. This study provides a detailed explanation of the key reasons why the periodic structure of long-period fiber-grating (LPG) can achieve significantly superior results for our method compared to those obtained using other numerical methods, such as the finite-difference time-domain and beam propagation methods. All existing numerical simulation methods focus on large-sized periodic components; only the method established in this study has 3D design and analysis capabilities. In addition, unlike the offset phenomenon of the design wavelength λ(D) and the maximum transmission wavelength λ(max) of the traditional coupled-mode theory, the method established in this study has rapid scanning LPG period capabilities. Therefore, during the initial component design process, only the operating wavelength must be set to ensure that the maximum transmission wavelength of the final product is accurate to the original setup, for example, λ = 1550 nm. We verified that the LPG-SPR sensor designed in this study provides a resolution of ~-45 dB and a sensitivity of ~27000 nm/RIU (refractive index unit). The objective of this study was to use the combination of these two numerical simulation methods in conjunction with a rigorous, simple, and complete design process to provide a graphical and simplistic simulation technique that reduces the learning time and professional threshold required for research and applications of LPG-SPR sensors.

Holographic detection of the orbital angular momentum of light with plasmonic photodiodes

Metallic components such as plasmonic gratings and plasmonic lenses are routinely used to convert free-space beams into propagating surface plasmon polaritons and vice versa. This generation of couplers handles relatively simple light beams, such as plane waves or Gaussian beams. Here we present a powerful generalization of this strategy to more complex wave-fronts, such as vortex beams that carry orbital angular momentum, also known as topological charge. This approach is based on the principle of holography: the coupler is designed as the interference pattern of the incident vortex beam and focused surface plasmon polaritons. We have integrated these holographic plasmonic interfaces into commercial silicon photodiodes, and demonstrated that such devices can selectively detect the orbital angular momentum of light. This holographic approach is very general and can be used to selectively couple free-space beams into any type of surface wave, such as focused surface plasmon polaritons and plasmonic Airy beams.

Surface wave holography on designing subwavelength metallic structures

We report a method in the framework of surface wave holography to manipulate the electromagnetic wave on the metallic surface for realizing complicated electromagnetic wave transport functionalities in three-dimensional (3D) space. The method allows for direct determination of the metallic surface structure morphology for a given transport functionality, by means of writing desirable object information on the metallic surface via interference with a reference surface wave. We have employed the analytical approach to design and build metallic surface structures that realize arbitrary single-point focusing, arbitrary single-direction beam collimation, and simultaneous two-point focusing of electromagnetic wave in 3D space. Good agreement between numerical simulations and microwave experimental measurements has been found and confirms the power of the method in conceptually understanding and exploiting the surface electromagnetic wave on subwavelength metal structures.

Surface-plasmon holography with white-light illumination

The recently emerging three-dimensional (3D) displays in the electronic shops imitate depth illusion by overlapping two parallax 2D images through either polarized glasses that viewers are required to wear or lenticular lenses fixed directly on the display. Holography, on the other hand, provides real 3D imaging, although usually limiting colors to monochrome. The so-called rainbow holograms--mounted, for example, on credit cards--are also produced from parallax images that change color with viewing angle. We report on a holographic technique based on surface plasmons that can reconstruct true 3D color images, where the colors are reconstructed by satisfying resonance conditions of surface plasmon polaritons for individual wavelengths. Such real 3D color images can be viewed from any angle, just like the original object.

Analysis of the coupling of light into a metal-dielectric composite waveguide structure and its application for use as a wavelength-band selection filter

We analyzed and experimentally tested a metal-dielectric composite waveguide structure. After coating the surface of the metal layer in the Kretschmann attenuated total internal reflection configuration with a dielectric layer, we explain the coupling of incident light into the coated layer. After finding the dispersion relationships for the layered media including the metal-dielectric composite waveguide, we can determine a solution for its existence in a complex domain. By inscribing a periodic grating structure in the dielectric layer of the metal-dielectric composite waveguide, we experimentally verify the coupling of incident light on the metal-dielectric composite waveguide structure and propose its application for use as a wavelength-band selection filter.

Cavity-enhanced biosensing utilizing plasmon resonance modes

Traditionally, surface plasmon resonance (SPR) biosensors utilize absorption of light radiation incident upon noble metal films above the total internal reflection angles. Herein we extend the SPR phenomenon to incorporate cavity plasmon resonance (CPR) excitation of metallic films at incidence angles below the critical angle. While SPR occurs for TM polarized light only and requires very specific excitation conditions, which could be disadvantageous in some practical designs, CPR does not require complicated evanescent field excitation above the critical total internal reflection angle and can be implemented for both transverse electric (TE) and transverse magnetic (TM) fields even under normal incidence (TEM). These and other unique features of CPR enable a more flexible design of highly efficient and sensitive biosensing devices.

Holography with surface-plasmon-coupled waveguide modes

We report on an attempt to use the enhancement effect of surface-plasmon resonance to improve the image quality of a waveguide hologram. With a structure consisting of a waveguide medium sandwiched between a metal film and a hologram, we obtained holographic images reconstructed by surface-plasmon-coupled waveguide modes. Comparison of the holographic images reconstructed by TM and TE modes indicates that the surface-plasmon effect is responsible for better image quality in diffraction efficiency and image contrast.