Three-Dimensional Analysis of Urban Aerosols by use of a Combined Lidar, Scanning Electron Microscopy, and X-Ray Microanalysis

Polarization-independent optical circulator for high accuracy Faraday depolarization lidar

A high precision, polarization-independent optical circulator was developed for high accuracy Faraday depolarization lidar. Glan laser prisms and other novel optics were utilized in the circulator optics, resulting in a high extinction ratio of polarization of >30 dB. High accuracy is needed to detect a small rotation angle in the polarization plane of the propagating beam. It is generated by the Faraday effect due to the lightning discharge. The developed circulator delivered high performance of insertion loss and isolation as laser transmitter and echo receiver in the inline lidar optics.

Quantitative Determination of Low-Z Elements in Single Atmospheric Particles on Boron Substrates by Automated Scanning Electron Microscopy−Energy-Dispersive X-ray Spectrometry

Atmospheric aerosols consist of a complex heterogeneous mixture of particles. Single-particle analysis techniques are known to provide unique information on the size-resolved chemical composition of aerosols. A scanning electron microscope (SEM) combined with a thin-window energy-dispersive X-ray (EDX) detector enables the morphological and elemental analysis of single particles down to 0.1 microm with a detection limit of 1-10 wt %, low-Z elements included. To obtain data statistically representative of the air masses sampled, a computer-controlled procedure can be implemented in order to run hundreds of single-particle analyses (typically 1000-2000) automatically in a relatively short period of time (generally 4-8 h, depending on the setup and on the particle loading). However, automated particle analysis by SEM-EDX raises two practical challenges: the accuracy of the particle recognition and the reliability of the quantitative analysis, especially for micrometer-sized particles with low atomic number contents. Since low-Z analysis is hampered by the use of traditional polycarbonate membranes, an alternate choice of substrate is a prerequisite. In this work, boron is being studied as a promising material for particle microanalysis. As EDX is generally said to probe a volume of approximately 1 microm3, geometry effects arise from the finite size of microparticles. These particle geometry effects must be corrected by means of a robust concentration calculation procedure. Conventional quantitative methods developed for bulk samples generate elemental concentrations considerably in error when applied to microparticles. A new methodology for particle microanalysis, combining the use of boron as the substrate material and a reverse Monte Carlo quantitative program, was tested on standard particles ranging from 0.25 to 10 microm. We demonstrate that the quantitative determination of low-Z elements in microparticles is achievable and that highly accurate results can be obtained using the automatic data processing described here compared to conventional methods.

Frequency Agile Infrared Lidar Based on a NonTracking KNbO(3) Optical Parametric Oscillator

We present what is to our knowledge the first mid-IR lidar system based on a KNbO(3) optical parametric oscillator pumped by a Ti:sapphire laser. The optical parametric oscillator works in a nontracking configuration and provides high-frequency agility from 1 to 4 mum. This system constitutes an extension to the IR of UV lidars described previously [Europhys. J. D 4, 231 (1998); Appl. Opt. 37, 2231 (1998); Atmos. Environ. 32, 2957 (1998)] for the determination of aerosol concentrations in urban atmospheres. As first field tests, measurements at 3.5 mum were performed in fog conditions. Water droplet size and concentration were determined from Mie calculations. Quantitative temporal mappings and angular profiles are presented.