Sandstorm effect on experimental optical camera communication

Curved OLED-based NLOS optical camera communications links

In this paper, for the first time, to the best of our knowledge, we experimentally demonstrate the use of a curved organic light emitting diode (OLED) as a transmitter (Tx) in the non-line-of-sight (NLOS) optical camera communication (OCC) link for an indoor environment using a camera as a receiver. The proposed NLOS-OCC scheme is evaluated for the signal-to-noise ratio (SNR) and the reception success rates R r s under key photographic and communication parameters, including exposure times t e x p and gain values G v, as well as the transmission frequency f s and the distance L. The SNR analysis is performed using a binary classification procedure based on a Gaussian mixture model for the first time, to the best of our knowledge, for OLED-based NLOS-OCC links. We also derive and demonstrate that the effect of G v on the SNR with respect to L is minimal based on the pixel illumination model. The initial analysis suggests that, for a wall reflector-based NLOS-OCC link that is 2 m long, the SNR and R r s increase by 1 dB and 4% (83-87%) for f s of 600 Hz, with an increase in t e x p of 1000-1500 µs and G v of 25-45 dB.

Long-distance indoor optical camera communication using side-emitting fibers as distributed transmitters

We present a design approach for a long-distance optical camera communication (OCC) system using side-emitting fibers as distributed transmitters. We demonstrate our approach feasibility by increasing the transmission distance by two orders up to 40 m compared to previous works. Furthermore, we explore the effect of the light-emitting diode (LED) modulation frequency and rolling shutter camera exposure time on inter-symbol interference and its effective mitigation. Our proposed OCC-fiber link meets the forward-error-correction (FEC) limit of 3.8 · 10-3 of bit error rate (BER) for up to 35 m (with BER= 3.35 · 10-3) and 40 m (with BER=1.13 · 10-3) using 2-mm and 3-mm diameter side-emitting fibers, respectively. Our results at on-off keying modulation frequencies of 3.54 kHz and 5.28 kHz pave the way to moderate-distance outdoor and long-distance indoor highly-reliable applications in the Internet of Things and OCC using side-emitting fiber-based distributed transmitters.

VLC Network Design for High Mobility Users in Urban Tunnels

Current vehicular systems require real-time information to keep drivers safer and more secure on the road. In addition to the radio frequency (RF) based communication technologies, Visible Light Communication (VLC) has emerged as a complementary way to enable wireless access in intelligent transportation systems (ITS) with a simple design and low-cost deployment. However, integrating VLC in vehicular networks poses some fundamental challenges. In particular, the limited coverage range of the VLC access points and the high speed of vehicles create time-limited links that the existing handover procedures of VLC networks can not be accomplished timely. Therefore, this paper addresses the problem of designing a vehicular VLC network that supports high mobility users. We first modify the traditional VLC network topology to increase uplink reliability. Then, a low-latency handover scheme is proposed to enable mobility in a VLC network. Furthermore, we validate the functionality of the proposed VLC network design method by using system-level simulations of a vehicular tunnel scenario. The analysis and the results show that the proposed method provides a steady connection, where the vehicular node is available more than 99% of the time regardless of the number of vehicular nodes on this network. Additionally, the system is able to achieve a Frame-Error-Rate (FER) performance lower than 10^-3.

Convolutional autoencoder for exposure effects equalization and noise mitigation in optical camera communication

In rolling shutter-based optical camera communication (OCC), the camera's exposure time limits the achievable reception bandwidth. In long-exposure settings, the image sensor pixels average the incident received power, producing inter-symbol interference (ISI), which is perceived in the images as a spatial mixture of the symbol bands. Hence, the shortest possible exposure configuration should be selected to alleviate ISI. However, in these conditions, the camera produces dark images with impracticable light conditions for human or machine-supervised applications. In this paper, a novel convolutional autoencoder-based equalizer is proposed to alleviate exposure-related ISI and noise. Furthermore, unlike other systems that use artificial neural networks for equalization and decoding, the training procedure is conducted offline using synthetic images for which no prior information about the deployment scenario is used. Hence the training can be performed for a wide range of cameras and signal-to-noise ratio (SNR) conditions, using a vast number of samples, improving the network fitting and the system decoding robustness. The results obtained in the experimental validation record the highest ISI mitigation potential for Manchester encoded on-off keying signals. The system can mitigate the ISI produced by exposure time windows that are up to seven times longer than the transmission symbol duration, with bit error rates (BER) lower than 10^-5 under optimal SNR conditions. Consequently, the reception bandwidth improves up to 14 times compared to non-equalized systems. In addition, under harsh SNRs conditions, the system achieves BERs below the forward error correction limit for 1dB and 5 dB while operating with exposure times that are 2 and 4 times greater than the symbol time, respectively.

Wireless Sensor Networks Using Sub-Pixel Optical Camera Communications: Advances in Experimental Channel Evaluation

Optical wireless communications in outdoor scenarios are challenged by uncontrollable atmospheric conditions that impair the channel quality. In this paper, different optical camera communications (OCC) equipment are experimentally studied in the laboratory and the field, and a sub-pixel architecture is raised as a potential solution for outdoor wireless sensor networks (WSN) applications, considering its achievable data throughput, the spatial division of sources, and the ability of cameras to overcome the attenuation caused by different atmospheric conditions such as rain, turbulence and the presence of aerosols. Sub-pixel OCC shows particularly adequate capabilities for some of the WSN applications presented, also in terms of cost-effectiveness and scalability. The novel topology of sub-pixel projection of multiple transmitters over the receiver using small optical devices is presented as a solution using OCC that re-uses camera equipment for communication purposes on top of video-monitoring.

Optical Camera Communication as an Enabling Technology for Microalgae Cultivation

Optical Camera Communication (OCC) systems have a potential application in microalgae production plants. In this work, a proof-of-concept prototype consisting of an artificial lighting photobioreactor is proposed. This reactor optimises the culture's photosynthetic efficiency while transmitting on-off keying signals to a rolling-shutter camera. Upon reception, both signal decoding and biomass concentration sensing are performed simultaneously using image processing techniques. Moreover, the communication channel's theoretical modelling, the data rate system's performance, and the plant distribution requirements and restrictions for a production-scale facility are detailed. A case study is conducted to classify three different node arrangements in a real facility, considering node visibility, channel capacity, and space exploitation. Finally, several experiments comprising radiance evaluation and Signal-to-Noise Ratio (SNR) computation are performed at different angles of view in both indoor and outdoor environments. It is observed that the Lambertian-like emission patterns are affected by increasing concentrations, reducing the effective emission angles. Furthermore, significant differences in the SNR, up to 20 dB, perceived along the illuminated surface (centre versus border), gradually reduce as light is affected by greater dispersion. The experimental analysis in terms of scattering and selective wavelength attenuation for green (Arthrospira platensis) and brown (Rhodosorus marinus) microalgae species determines that the selected strain must be considered in the development of this system.