Effect on the output of a luminescent solar concentrator on application of organic wavelength-selective mirrors

Biomimetic light-harvesting funnels for re-directioning of diffuse light

Efficient sunlight harvesting and re-directioning onto small areas has great potential for more widespread use of precious high-performance photovoltaics but so far intrinsic solar concentrator loss mechanisms outweighed the benefits. Here we present an antenna concept allowing high light absorption without high reabsorption or escape-cone losses. An excess of randomly oriented pigments collects light from any direction and funnels the energy to individual acceptors all having identical orientations and emitting ~90% of photons into angles suitable for total internal reflection waveguiding to desired energy converters (funneling diffuse-light re-directioning, FunDiLight). This is achieved using distinct molecules that align efficiently within stretched polymers together with others staying randomly orientated. Emission quantum efficiencies can be >80% and single-foil reabsorption <0.5%. Efficient donor-pool energy funneling, dipole re-orientation, and ~1.5-2 nm nearest donor-acceptor transfer occurs within hundreds to ~20 ps. Single-molecule 3D-polarization experiments confirm nearly parallel emitters. Stacked pigment selection may allow coverage of the entire solar spectrum.

Zero-reabsorption doped-nanocrystal luminescent solar concentrators

Optical concentration can lower the cost of solar energy conversion by reducing photovoltaic cell area and increasing photovoltaic efficiency. Luminescent solar concentrators offer an attractive approach to combined spectral and spatial concentration of both specular and diffuse light without tracking, but they have been plagued by luminophore self-absorption losses when employed on practical size scales. Here, we introduce doped semiconductor nanocrystals as a new class of phosphors for use in luminescent solar concentrators. In proof-of-concept experiments, visibly transparent, ultraviolet-selective luminescent solar concentrators have been prepared using colloidal Mn(2+)-doped ZnSe nanocrystals that show no luminescence reabsorption. Optical quantum efficiencies of 37% are measured, yielding a maximum projected energy concentration of ∼6× and flux gain for a-Si photovoltaics of 15.6 in the large-area limit, for the first time bounded not by luminophore self-absorption but by the transparency of the waveguide itself. Future directions in the use of colloidal doped nanocrystals as robust, processable spectrum-shifting phosphors for luminescent solar concentration on the large scales required for practical application of this technology are discussed.

Luminescent solar concentration with semiconductor nanorods and transfer-printed micro-silicon solar cells

We utilize CdSe/CdS seeded nanorods as a tunable lumophore for luminescent concentration. Transfer-printed, ultrathin crystalline Si solar cells are embedded directly into the luminescent concentrator, allowing the study of luminescent concentrators with an area over 5000 times the area of the solar cell. By increasing the size of the CdS rod with respect to the luminescent CdSe seed, the reabsorption of propagating photons is dramatically reduced. At long luminescence propagation distances, this reduced reabsorption can overcome the diminished quantum yield inherent to the larger semiconductor structures, which is studied with lifetime spectroscopy. A Monte Carlo ray tracing model is developed to explain the performance of the luminescent concentrator and is then used as a design tool to determine the effect of luminescence trapping on the concentration of light using both CdSe/CdS nanorods and a model organic dye. We design an efficient luminescence trapping structure that should allow the luminescent concentrator based on CdSe/CdS nanorods to operate in the high-concentration regime.

High-performance flexible waveguiding photovoltaics

The use of flat-plane solar concentrators is an effective approach toward collecting sunlight economically and without sun trackers. The optical concentrators are, however, usually made of rigid glass or plastics having limited flexibility, potentially restricting their applicability. In this communication, we describe flexible waveguiding photovoltaics (FWPVs) that exhibit high optical efficiencies and great mechanical flexibility. We constructed these FWPVs by integrating poly-Si solar cells, a soft polydimethylsiloxane (PDMS) waveguide, and a TiO₂-doped backside reflector. Optical microstructures that increase the light harvesting ability of the FWPVs can be fabricated readily, through soft lithography, on the top surface of the PDMS waveguide. Our optimized structure displayed an optical efficiency of greater than 42% and a certified power conversion efficiency (PCE) of 5.57%, with a projected PCE as high as approximately 18%. This approach might open new avenues for the harvesting of solar energy at low cost with efficient, mechanically flexible photovoltaics.

Increased efficiency of luminescent solar concentrators after application of organic wavelength selective mirrors

Organic wavelength-selective mirrors are used to reduce the loss of emitted photons through the surface of a luminescent solar concentrator (LSC). A theoretical calculation suggests that application of a 400 nm broad reflector on top of an LSC containing BASF Lumogen Red 305 as a luminophore can reflect 91% of all surface emitted photons back into the device. Used in this way, such broad reflectors could increase the edge-emission efficiency of the LSC by up to 66%. Similarly, 175 nm broad reflectors could increase efficiency up to 45%. Measurements demonstrate more limited effectiveness and dependency on the peak absorbance of the LSC. At higher absorbance, the increased number of internal re-absorption events reduces the effectiveness of the reflectors, leading to a maximum increase in LSC efficiency of ~5% for an LSC with a peak absorbance of 1. Reducing re-absorption by reducing dye concentration or the coverage of the luminophore coating results in an increase in LSC efficiency of up to 30% and 27%, respectively.

Progress in phosphors and filters for luminescent solar concentrators

Luminescent solar concentrators would allow for high concentration if losses by reabsorption and escape could be minimized. We introduce a phosphor with close-to-optimal luminescent properties and hardly any reabsorption. A problem for use in a luminescent concentrator is the large scattering of this material; we discuss possible solutions for this. Furthermore, the use of broad-band cholesteric filters to prevent escape of luminescent radiation from this phosphor is investigated both experimentally and using simulations. Simulations are also used to predict the ultimate performance of luminescent concentrators.

Dye alignment in luminescent solar concentrators: I. Vertical alignment for improved waveguide coupling

Luminescent solar concentrators (LSCs) use dye molecules embedded in a flat-plate waveguide to absorb solar radiation. Ideally, the dyes re-emit the absorbed light into waveguide modes that are coupled to solar cells. But some photons are always lost, re-emitted through the face of the LSC and coupled out of the waveguide. In this work, we improve the fundamental efficiency limit of an LSC by controlling the orientation of dye molecules using a liquid crystalline host. First, we present a theoretical model for the waveguide trapping efficiency as a function of dipole orientation. Next, we demonstrate an increase in the trapping efficiency from 66% for LSCs with no dye alignment to 81% for a LSC with vertical dye alignment. Finally, we show that the enhanced trapping efficiency is preserved for geometric gains up to 30, and demonstrate that an external diffuser can alleviate weak absorption in LSCs with vertically-aligned dyes.