Laser heating of uncoated optics in a convective medium

Characterization of Absorption Losses and Transient Thermo-Optic Effects in a High-Power Laser System

(1) Background: The modeling, characterization, and mitigation of transient lasers, thermal stress, and thermo-optic effects (TOEs) occurring inside high energy lasers have become hot research topics in laser physics over the past few decades. The physical sources of TOEs are the un-avoidable residual absorption and scattering in the volume and on the surface of passive and active laser elements. Therefore, it is necessary to characterize and mitigate these effects in real laser systems under high-power operations. (2) Methods: The laboratory setup comprised a 10-kW continuous wave laser source with a changeable beam diameter, and dynamic registration of the transient temperature profiles was applied using an infrared camera. Modeling using COMSOL Multiphysics enabled matching of the surface and volume absorption coefficients to the experimental data of the temperature profiles. The beam quality was estimated from the known optical path differences (OPDs) occurring within the examined sample. (3) Results: The absorption loss coefficients of dielectric coatings were determined for the evaluation of several coating technologies. Additionally, OPDs for typical transmissive and reflective elements were determined. (4) Conclusions: The idea of dynamic self-compensation of transient TOEs using a tailored design of the considered transmissive and reflecting elements is proposed.

High-power lasers for directed-energy applications

In this article, we review and discuss the research programs at the Naval Research Laboratory (NRL) on high-power lasers for directed-energy (DE) applications in the atmosphere. Physical processes affecting propagation include absorption/scattering, turbulence, and thermal blooming. The power levels needed for DE applications require combining a number of lasers. In atmospheric turbulence, there is a maximum intensity that can be placed on a target that is independent of the initial beam spot size and laser beam quality. By combining a number of kW-class fiber lasers, scientists at the NRL have successfully demonstrated high-power laser propagation in a turbulent atmosphere and wireless recharging. In the NRL experiments, four incoherently combined fiber lasers having a total power of 5 kW were propagated to a target 3.2 km away. These successful high-power experiments in a realistic atmosphere formed the basis of the Navy's Laser Weapon System. We compare the propagation characteristics of coherently and incoherently combined beams without adaptive optics. There is little difference in the energy on target between coherently and incoherently combined laser beams for multi-km propagation ranges and moderate to high levels of turbulence. Unlike incoherent combining, coherent combining places severe constraints on the individual lasers. These include the requirement of narrow power spectral linewidths in order to have long coherence times as well as polarization alignment of all the lasers. These requirements are extremely difficult for high-power lasers.

Determination of absorption coefficient based on laser beam thermal blooming in gas-filled tube

Thermal blooming of a laser beam propagating in a gas-filled tube is investigated both analytically and experimentally. A self-consistent formulation taking into account heating of the gas and the resultant laser beam spreading (including diffraction) is presented. The heat equation is used to determine the temperature variation while the paraxial wave equation is solved in the eikonal approximation to determine the temporal and spatial variation of the Gaussian laser spot radius, Gouy phase (longitudinal phase delay), and wavefront curvature. The analysis is benchmarked against a thermal blooming experiment in the literature using a CO₂ laser beam propagating in a tube filled with air and propane. New experimental results are presented in which a CW fiber laser (1 μm) propagates in a tube filled with nitrogen and water vapor. By matching laboratory and theoretical results, the absorption coefficient of water vapor is found to agree with calculations using MODTRAN (the MODerate-resolution atmospheric TRANsmission molecular absorption database) and HITRAN (the HIgh-resolution atmospheric TRANsmission molecular absorption database).