Molecular vibrations of bisphenol "S" revealed by FTIR spectroscopy and their correlation with bisphenol "A" disclosed by principal component analysis

Towards the assessment of exposure to bisphenols in everyday items with increased accuracy by the use of integrated calibration method (ICM)-based methodology

The most crucial purpose of the measurement is to obtain a reliable result that reflects the actual qualitative and/or quantitative features of the tested material. The overriding goal of analytical chemistry is to obtain accurate results after compensating of various interference effects as well as non-linear calibration dependence. A new approach based on an integrated calibration method (ICM) supported by H-point standard addition method (HPSAM) has been used to improve the quality of analytical results. The proposed methodological approach was extended using the step-by-step dilution procedure, and five measurement conditions were used to eliminate multiplicative, additive, and non-linear interferences. On this basis, a set of estimations is obtained to improve the quality of the analytical results. The analytical usefulness of the proposed approach was tested on the example of the determination of three compounds from the group of bisphenols (BPs) using the chromatographic technique - HPLC-DAD (high-performance liquid chromatography with diode array detection). Compared to the reference method - fluorescence spectroscopy - the obtained results were characterized by excellent accuracy (RE=3 % in most cases). The developed methodology allowed to carry out a risk assessment on BPA, BPF, and BPS present in samples of shop receipts and canned food. Store clerks have been shown to be particularly vulnerable to PBF and BPS in receipts due to skin permeation (exposure factors were equal to 308.97 µg/g for BPF and 181.89 µg/g for BPS). Consumers should also pay close attention to the BPA found in canned food samples (the average concentration was equal to 20.61 µg/mL, and the tolerable daily intake was exceeded over 165.000 times). The analytical method and the methodological approach were evaluated using the RGB model and the AGREE approach - it was shown that the method can be successfully used for other analytical purposes (the method is White) and is environmentally friendly (Significance=0.63).

Synthesis and characterization of an engineered dual crosslinked hydrogel system based on hyaluronic acid, chondroitin sulfate, and carboxymethyl chitosan with platelet‐rich plasma

Hydrogels play a key role in cartilage tissue engineering (CTE) and cell transplantation. Idealy, the hydrogels designed for CTE should facilitate the formation of cartilage ECM, cilinically. However, challenges remain to engineer hydrogels with controllable responses, fast‐self recovery, and high stability. In the present study, a dual crosslinked hydrogel system based on the electrostatic and ionic bonds by mixing polymers composed of hyaluronic acid (HA), chondroitin sulfate (CS), and carboxymethyl chitosan (CMC) combined with platelet‐rich plasma (PRP) was successfully prepared. To increase the stability of hydrogel, 1‐Ethyl‐3‐(3‐dimethylamino propyl‐carbodiimide hydrochloride (EDC)/N‐hydroxy‐succinimide (NHS) was used as the crosslinking agent. The results revealed more stability of dual crosslinking hydrogel (HC54) due to proper stoichiometric ratio between polymers components and the crosslinking agent. According to the rheology results, a non‐Newtonian and viscoelastic behavior was recognized for all hydrogels and the highest mechanical property (modulus) of HC54 hydrogel was confirmed. Based on the SEM micrographs and weight loss analysis, the lowest degradation rate was observed for the HC54 hydrogel after immersion in phosphate buffered saline solution. PRP release from the hydrogel was analyzed with the Bradford assay method and a cumulative release of 50 percent during 15 days was found. Finally, the MTT assay conducted on dual crosslinked HA/CS/CMC hydrogel with and without PRP both demonstrated cytocompatibility of hydrogel while the presence of PRP enhanced the cell viability.

Research Progress of Applying Infrared Spectroscopy Technology for Detection of Toxic and Harmful Substances in Food

In recent years, food safety incidents have been frequently reported. Food or raw materials themselves contain substances that may endanger human health and are called toxic and harmful substances in food, which can be divided into endogenous, exogenous toxic, and harmful substances and biological toxins. Therefore, realizing the rapid, efficient, and nondestructive testing of toxic and harmful substances in food is of great significance to ensure food safety and improve the ability of food safety supervision. Among the nondestructive detection methods, infrared spectroscopy technology has become a powerful solution for detecting toxic and harmful substances in food with its high efficiency, speed, easy operation, and low costs, while requiring less sample size and is nondestructive, and has been widely used in many fields. In this review, the concept and principle of IR spectroscopy in food are briefly introduced, including NIR and FTIR. Then, the main progress and contribution of IR spectroscopy are summarized, including the model’s establishment, technical application, and spectral optimization in grain, fruits, vegetables, and beverages. Moreover, the limitations and development prospects of detection are discussed. It is anticipated that infrared spectroscopy technology, in combination with other advanced technologies, will be widely used in the whole food safety field.

Terahertz spectroscopy of Bisphenol "A", "AF", "S", "E" and the interrelationship between their molecular vibrations

Bisphenol "A" is a widespread environmental hormone. After the prohibition on the use of BPA in some applications, it is progressively replaced by its variants. However, these variants of Bisphenol "A" are also noxious. It is therefore of the utmost importance to find the similarity among these materials and put all of them under restriction to avoid harmful effects. Therefore, Bisphenol "A", "AF", "E", and "S" are studied by Terahertz spectroscopy (0.5-2.5 THz). Various molecular vibrations are found and assigned based on density-functional-theory calculations. Refractive Indices are calculated as well. The principal component analysis reveals the critical vibrational frequencies for their detection and shows the correlation between them.

M, M. P, Mohan G, Shastry S, Chidangil S. Laser Raman tweezer spectroscopy to explore the bisphenol A-induced changes in human erythrocytes

Hemoglobin depletion was observed at higher BPA concentration.