Phase-noise model for actively linearized frequency-modulated continuous-wave ladar

Impact of laser phase noise on the ranging accuracy of a cooperative MIMO FMCW photonic radar system

In this paper, a FMCW-based cooperative 2×2 MIMO photonic radar system using heterodyne detection is presented. The proposed system consists of two separate sensor nodes that use a linear frequency modulated continuous wave signal, which allows simultaneous monostatic and bistatic radar measurement, where the target range and angle of arrival information are extracted. The additional bistatic information enhances the target detection and estimation capabilities with improved accuracy. This accuracy in practicality is affected by the laser phase noise, which degrades the overall system performance. Here, the analytical laser phase noise model for the MIMO system is derived and implemented to analyze its impact on the ranging accuracy of the proposed system. Under the impact of standard white Gaussian laser phase noise assumption, the monostatic and bistatic response of the detected signal is measured and compared using statistics of measurement error. Further, the signal-to-noise ratio and SSB laser phase noise of the monostatic and bistatic response are measured and compared at different target ranges. At last, the phase-noise-limited ranging accuracy of the system is evaluated and analyzed. The concept shown in this work paves the way for advanced photonic radar system applications such as modern radar systems, electronic warfare systems, metrology, and automotive vehicle radar with multiperspective coherent detection.

Symmetrical dual-sideband oppositely chirped differential FMCW LiDAR

A differential FMCW LiDAR for high-precision distance measurements of remote non-stationary targets is proposed and demonstrated experimentally. The required positive and negative symmetrically oppositely chirped laser beams are generated synchronously through a fixed-frequency laser by employing externally unified broadband optical phase modulation and symmetrical dual-sideband optical filtering. After coaxial transmission and reception, orthogonally polarized optical beat signals containing target distance and vector velocity data are de-chirped separately by optical in-phase and quadrature demodulations and then synchronously received by four-channel photoelectric balance detectors. After differential processing of the received beat signals and a fast Fourier transform, it is possible to implement real-time simultaneous range and vector velocity measurements. The inherent symmetrically oppositely chirped optical frequency make it possible to measure the target distance immune to the internal random phase noise introduced by the spectral linewidth of the frequency-swept laser and the external random phase noise introduced by atmospheric turbulence, speckle, and vibration. Meanwhile, the measurement of the target velocity is immune to the nonlinearity of the frequency-swept laser. These results encourage an approach to overcome the barriers of coherence length, nonlinearity, and external noise, and implement simultaneous real-time ranging and velocimetry of long-range, rapid-moving targets.

Beyond a 107 range-resolution-1 product in an OFDR based on a periodic phase noise estimation method

We present and demonstrate a method based on a periodic phase noise estimation in an optical frequency domain reflectometry (OFDR) capable of a beyond 10⁷ range-resolution^-1 product (RRP) for the first time, which corresponds to 2.5 × improvement compared with the state-of-the-art. The moving average filter is employed to suppress the amplification of noise in the derivation process. Further, with the help of a third-order Taylor expansion, this method provides a highly precise estimation of periodic phase noise, which is the main factor impacting the performance of OFDR systems with medium-to-long measurement range combined with a submillimeter spatial resolution. A spatial resolution within 535 μm over the measurement range of 8 km is obtained. The proposed method offers a promising technique for fiber network monitoring and sensing applications.

Long distance high resolution FMCW laser ranging with phase noise compensation and 2D signal processing

A long distance high resolution frequency-modulated continuous wave (FMCW) laser rangefinder with phase noise compensation and two-dimensional (2D) data processing skills is developed. Range-finding ladar consists of a continuously chirped laser source, an auxiliary reference interferometer, and a monostatic optical transceiver for target illumination and return photon collection. To extend the range unambiguity and lower the electronic processing bandwidth, a two-step laser frequency chirping scheme is adopted, where a long pulse width, small frequency bandwidth laser chirping signal are used in step 1 for coarse distance estimation, and a short pulse width and large frequency bandwidth laser chirping signal are applied afterwards for step 2 high resolution distance realization. An auxiliary reference interferometer is to record the phase noise originated from the laser source to compensate for phase errors induced in the target return photons. The 2D data processing skill helps to coherently sum up all the phase noise removed echo photons to achieve high resolution range peak extraction with high detection sensitivity. Experimental demonstration shows that the proposed FMCW ladar at 1550 nm wavelength with a laser chirping bandwidth of 10 GHz and electronic processing bandwidth of 200 MHz can measure a corner cube test target in an outdoor atmospheric environment, and the measurement results are 12013.905 m with a 2.4 cm range resolution under strong return photon levels and 12013.920 m with a 2.5 cm range resolution under weak return photon levels.

Directly modulated optical negative feedback lasers for long-range FMCW LiDAR

Frequency sweep operation of directly modulated optical negative feedback lasers is numerically and experimentally investigated for frequency-modulated continuous-wave (FMCW) light detection and ranging (LiDAR) with a high signal-to-noise ratio (SNR), particularly over a long range. Low FM noise corresponding to a spectral linewidth of ∼2.0 kHz is sustained even with injection current modulation of an optical negative feedback laser through optical feedback from a Fabry-Perot etalon, and a beat note spectrum with a 30-dB SNR is achieved even when a 300-m delay fiber is used as a ranging sample. These results encourage an approach to provide directly modulated frequency-swept lasers for long-range FMCW LiDAR.

Modeling and optimization of an unbalanced delay interferometer based OPLL system

We present and establish a versatile analytical model that allows overall analysis and optimization for the phase noise performance of the delay interferometer based optical phase-locked loop (OPLL). It allows considering any type of lasers with arbitrary frequency noise properties while taking into account the contributions from various practical noise sources, thus enabling comprehensive investigation for the complicated interaction among underlying limiting factors. The quantitative analysis for their evolution along with the change of the delay of the interferometer unveils the resulting impact on the fundamental limit and dynamics of the output phase noise, leading to a well-balanced loop bandwidth and sensitivity thus enabling the overall optimization in terms of closed-loop noise performance. The tendencies observed and the results predicted in terms of coherence metrics in numerical verification with different lasers have testified to the precision and effectiveness of the proposed model, which is quite capable of acting as a design tool for the insightful analysis and overall optimization with guiding significance for practical applications.

Ultra-long range optical frequency domain reflectometry using a coherence-enhanced highly linear frequency-swept fiber laser source

We report on an ultra-long range optical frequency domain reflectometry (OFDR) using a coherence-enhanced highly linear frequency-swept fiber laser source based on an optoelectronic phase-locked loop (OPLL). The frequency-swept fiber laser is locked to an all-fiber-based Mach-Zehnder interferometer (MZI) to suppress sweep nonlinearity and enhance the laser coherence, leading to a high coherence linear frequency sweep of 1 GHz in the duration time of 25 ms. This enables the OFDR to realize an ultra-long range measurement with a high spatial resolution. As a result, we obtain a 10 cm transform-limited spatial resolution at a 20 km fiber within 25 ms measurement time, and a 72 cm spatial resolution over an entire 200 km fiber link within 5 ms measurement time. The proposed reflectometry provides a high-performance solution with both high spatial resolution and ultra-long measurement range for field real-time fiber network monitoring and sensing applications.