Three-dimensional imaging system with both improved lateral resolution and depth of field considering non-uniform system parameters

Integral Imaging Display System Based on Human Visual Distance Perception Model

In an integral imaging (II) display system, the self-adjustment ability of the human eye can result in blurry observations when viewing 3D targets outside the focal plane within a specific range. This can impact the overall imaging quality of the II system. This research examines the visual characteristics of the human eye and analyzes the path of light from a point source to the eye in the process of capturing and reconstructing the light field. Then, an overall depth of field (DOF) model of II is derived based on the human visual system (HVS). On this basis, an II system based on the human visual distance (HVD) perception model is proposed, and an interactive II display system is constructed. The experimental results confirm the effectiveness of the proposed method. The display system improves the viewing distance range, enhances spatial resolution and provides better stereoscopic display effects. When comparing our method with three other methods, it is clear that our approach produces better results in optical experiments and objective evaluations: the cumulative probability of blur detection (CPBD) value is 38.73%, the structural similarity index (SSIM) value is 86.56%, and the peak signal-to-noise ratio (PSNR) value is 31.12. These values align with subjective evaluations based on the characteristics of the human visual system.

Three-Dimensional Integral Imaging with Enhanced Lateral and Longitudinal Resolutions Using Multiple Pickup Positions

In this paper, we propose an enhancement of three-dimensional (3D) image visualization techniques by using different pickup plane reconstructions. In conventional 3D visualization techniques, synthetic aperture integral imaging (SAII) and volumetric computational reconstruction (VCR) can be utilized. However, due to the lack of image information and shifting pixels, it may be difficult to obtain better lateral and longitudinal resolutions of 3D images. Thus, we propose a new elemental image acquisition and computational reconstruction to improve both the lateral and longitudinal resolutions of 3D objects. To prove the feasibility of our proposed method, we present the performance metrics, such as mean squared error (MSE), peak signal-to-noise ratio (PSNR), structural similarity (SSIM), and peak-to-sidelobe ratio (PSR). Therefore, our method can improve both the lateral and longitudinal resolutions of 3D objects more than the conventional technique.

3D photon counting integral imaging by using multi-level decomposition

In this paper, we propose three-dimensional (3D) photon counting integral imaging by using multi-level decomposition such as discrete wavelet transform to improve the visual quality and measurement accuracy under photon-starved conditions. Conventional 3D integral imaging can visualize 3D objects and acquire their depth information. However, the amount of irradiated light on the object causes the degradation of visual quality for 3D images under photon-starved conditions. To visualize 3D objects, photon counting integral imaging has been utilized. It can detect photons from 3D scenes by using a computational photon counting model, which is modelled by the Poisson random process. However, photons occur not only from objects but also in areas where objects do not exist. Moreover, photon fluctuation may occur in the scene through shot noise. Since these noise photons are measurement errors, it may decrease the image quality and accuracy. In contrast, our proposed method uses 2D discrete wavelet transform, which can emphasize the object photons effectively. Finally, our proposed method can enhance the visual quality of 3D images and provide more accurate depth information under photon-starved conditions. To prove the feasibility of our proposed method, we implement the optical experiment and calculate various image quality metrics.

3D light-field display with an increased viewing angle and optimized viewpoint distribution based on a ladder compound lenticular lens unit

Three-dimensional (3D) light-field displays (LFDs) suffer from a narrow viewing angle, limited depth range, and low spatial information capacity, which limit their diversified application. Because the number of pixels used to construct 3D spatial information is limited, increasing the viewing angle reduces the viewpoint density, which degrades the 3D performance. A solution based on a holographic functional screen (HFS) and a ladder-compound lenticular lens unit (LC-LLU) is proposed to increase the viewing angle while optimizing the viewpoint utilization. The LC-LLU and HFS are used to create 160 non-uniformly distributed viewpoints with low crosstalk, which increases the viewpoint density in the middle viewing zone and provides clear monocular depth cues. The corresponding coding method is presented as well. The optimized compound lenticular lens array can balance between suppressing aberration and improving displayed quality. The simulations and experiments show that the proposed 3D LFD can present natural 3D images with the right perception and occlusion relationship within a 65° viewing angle.

Fabrication of a micro-lens array for improving depth-of-field of integral imaging 3D display

In this paper, we present a new, to the best of our knowledge, structure of double pinhole/micro-lens array (DP/MLA) with two center-depth planes, used for improving the depth-of-field (DOF) of integral imaging (II), which can be fabricated by a combination of lithography and inkjet printing. The results show that a black circular groove array prepared by lithography can be used for micro-lens location and reduce the stray light for II. By controlling the parameters of the inkjet printing system, DP/MLA with high precision, high alignment, and good focusing ability can be achieved. When the fabricated DP/MLA is applied in the II system, the reconstructed image has a better three-dimensional (3D) image with higher DOF than that by traditional MLA and higher quality than that by ordinary double-layer MLA.

Wave-optics and spatial frequency analyses of integral imaging three-dimensional display systems

Wave optics is usually thought to be more rigorous than geometrical optics to analyze integral imaging (II) systems. However, most of the previous wave-optics investigations are directed to a certain subsystem or do not sufficiently consider the finite aperture of microlens arrays (MLAs). Therefore, a diffraction-limited model of the entire II system, which consists of pickup, image processing, and reconstruction subsystems, is proposed, and the effects of system parameters on spatial resolution are especially studied. With the help of paraxial scalar diffraction theory, the origin impulse response function of the entire II system is derived; the parameter matching condition with optimum resolution and the wave-optics principle are achieved. Besides, the modulation transfer function is then obtained and Fourier analysis is performed, which indicates that the features of MLA and the display play a critical role in spatial frequency transfer characteristics, greatly affecting the resolution. These studies might be useful for the further research and understanding of II systems, especially for the effective enhancement of resolution.

Bionic-compound-eye structure for realizing a compact integral imaging 3D display in a cell phone with enhanced performance

A bionic-compound-eye structure (BCES), which is a substitute of a microlens array, is proposed to enhance the performance of integral imaging (II) 3D display systems. Hexagonal ocelli without gaps and barriers are predesigned to obtain a continuous image, high-resolution, and uniform parallax. A curved substrate is designed to enhance the viewing angle. In addition, ocelli are fused with the substrate to form a relief structure, BCES. When they are placed above a normal display, continuous and full-parallax 3D images with 150 µm effective resolution and a 28° horizontal, 22° vertical viewing angle could be achieved, about twice as much as that of normal systems. The weight of the BCES is 31 g, and the thickness of the whole system is 22 mm; thus, the BCES-based II (BCES-II) is very compact. In addition, this structure can be easily integrated into a cell phone or iPad for compact quasi-2D and 3D adjustable display.