Tunable defect modes of one-dimensional photonic crystals containing a Dirac semimetal-based metamaterial defect layer

Broad/narrowband switchable terahertz absorber based on Dirac semimetal and strontium titanate for temperature sensing

A broadband and narrowband switchable terahertz (THz) absorber based on a bulk Dirac semimetal (BDS) and strontium titanate (STO) is proposed. Narrowband and broadband absorption can be switched by adjusting the Fermi level of the BDS. When the Fermi level of the BDS is 100 meV, the device is an absorber with three narrowband absorption peaks. The frequencies are 0.44, 0.86, and 1.96 THz, respectively, when the temperature of STO is 250 K. By adjusting the temperature of STO from 250 to 500 K, the blue shifts of the frequencies are approximately 0.14, 0.32, and 0.60 THz, respectively. The sensitivities of the three absorption peaks are 0.56, 1.27, and 2.38 GHz/K, respectively. When the Fermi level of the BDS is adjusted from 100 to 30 meV, the device can be switched to a broadband absorber with a bandwidth of 0.70 THz. By adjusting the temperature of STO from 250 to 500 K, the central frequency shifts from 1.40 to 1.79 THz, and the bandwidth broadens from 0.70 to 0.96 THz. The sensitivity of the central frequency is 1.57 GHz/K. The absorber also has a wide range of potential applications in multifunctional tunable devices, such as temperature sensors, stealth equipment, and filters.

Tunable multichannel Fibonacci one-dimensional terahertz photonic crystal filter

This paper proposes a multichannel terahertz optical filter based on a one-dimensional photonic crystal with a third-order Fibonacci structure, including a bulk Dirac semimetal. The tuning of the optical properties of the proposed structure has been theoretically studied as a function of the Dirac semimetals' Fermi energy. Furthermore, the effects of the Fibonacci structure's periodic number and light's incident angle on optical channels were investigated. The results reveal that changes in the Fermi energy and incident angle remarkably affect the frequency and transmission of the optical channels. Additionally, the number of optical channels increases by increasing the periodic number of the Fibonacci structure.

Photonic bandgap engineering in hybrid one-dimensional photonic crystals containing all-dielectric elliptical metamaterials

Metamaterials with negative permittivities or/and permeabilities greatly enrich photonic bandgap (PBG) engineering in one-dimensional (1-D) photonic crystals (PhCs). Nevertheless, their inevitable optical losses strongly destroy the crucial prohibition characteristic of PBGs, which makes such engineered PBGs not utilizable in some relevant physical processes and optical/optoelectronic devices. Herein, we bridge a link between 1-D PhCs and all-dielectric loss-free metamaterials and propose a hybrid 1-D PhC containing all-dielectric elliptical metamaterials to engineer angle-dependence of PBGs. Associating the Bragg scattering theory with the iso-frequency curve analysis, an analytical model is established to precisely describe the angle-dependence of PBG. Based on the analytical model, two types of special PBGs, i.e., angle-insensitive and angle-sensitive PBGs, are designed. By further introducing defects into the designed 1-D PhCs, angle-dependence of defect modes can also be flexibly controlled. Our protocol opens a viable route to precisely engineering PBGs and promotes the development of PBG-based physics and applications.

Terahertz angle-independent photonic bandgap in a one-dimensional photonic crystal containing InSb-based hyperbolic metamaterials

According to the Bragg scattering theory, terahertz (THz) photonic bandgaps (PBGs) in all-dielectric one-dimensional (1-D) photonic crystals (PhCs) are strongly dependent on the incident angle. Such a strongly angle-dependent property of the PBGs not only limits the widths of omnidirectional PBGs, but also causes the strongly angle-dependent property of defect modes and optical Tamm states in multilayer structures containing all-dielectric 1-D PhCs. Until now, ways to achieve a THz angle-independent PBG have been an open problem. Herein, according to the existing phase-variation compensation theory, we achieve a THz angle-independent PBG in a 1-D PhC containing indium antimonide (InSb)-based hyperbolic metamaterials for transverse magnetic polarization. Different from conventional strongly angle-dependent PBGs, the angle-independent PBG remains almost unshifted as the incident angle changes. The relative frequency shifts of the upper and the bottom edges of the angle-independent PBG are only 1.4% and 0.4%, respectively. Besides, the angle-independent property of the PBG is robust against the disturbance of the layer thickness. The proposed 1-D PhC composes only two frequently used materials: silicon (Si) and InSb. Such a Si/InSb multilayer can be fabricated by the current ion-assisted electron beam coating or spin coating techniques. This THz angle-independent PBG would be utilized to design THz omnidirectional filters or absorbers.

The impact of magnetized cold plasma and its various properties in sensing applications

These analyses present a novel magnetized cold plasma-based 1D photonic crystal structure for detecting the refractive index of various bio-analytes. The proposed structure is designed with two photonic crystals composed of an alternating layer of right-hand polarization and left-hand polarization of the magnetized cold plasma material with a central defect layer. Transmittance characteristics of the structure are studied by employing the well-known transfer matrix method. Various geometrical parameters such as electron density, external magnetic field, thickness of odd and even layers of the multilayers, thickness of the sample layer, and incident angle are judiciously optimized to attain the best sensitivity, figure of merit, quality factor, signal-to-noise ratio, detection range and limit of detection. Finally, a maximum sensitivity of 25 GHz/RIU is accomplished with the optimized value of structure parameters, which can be considered as a noteworthy sensing performance.

Dynamically dual-tunable dual-band to four-band metamaterial absorbers based on bulk Dirac semimetal and vanadium dioxide

In this work, we investigate dynamically dual-tunable dual-band, triple-band, and four-band metamaterial absorbers (MAs) based on a bulk Dirac semimetal (BDS) and vanadium dioxide (VO₂). Due to the bright-bright mode coupling between BDS rods, the dual-band, triple-band, and four-band MAs can be realized when the VO₂ is in a fully metallic state. The average absorptivity of the absorption peaks in the three MAs reaches 97%, 98.6%, and 96.4% respectively. The physical mechanism can be explained by the radiating two-oscillator model. The resonant frequencies and absorptance intensities at absorption peaks in each MA can be dynamically tuned by varying the BDS Fermi energy and the VO₂ conductivity.

Unidirectional Invisibility in PT-Symmetric Cantor Photonic Crystals

In this paper, we investigate the nonreciprocity of reflection in parity-time−symmetric (PT-symmetric) Cantor photonic crystals (PCs). Two one-dimensional PCs abiding by the Cantor sequence are PT-symmetric about the center. The PT symmetry and defect cavities in Cantor PCs can induce optical fractal states which are transmission modes. Subsequently, the left and right reflectionless states are located on both sides of a transmission peak. The invisible effect depends on the incident direction and the invisible wavelength can be modulated by the gain–loss factor. This study has potential applications in tunable optical reflectors and invisible cloaks.

Bistable absorption in a 1D photonic crystal with a nanocomposite defect layer

We investigate the nonlinear absorption properties of a defective one-dimensional photonic crystal at the near-infrared range using the nonlinear transfer matrix method. The defect is a nanocomposite layer containing vanadium dioxide nanoparticles sandwiched between two nonlinear dielectric layers. The linear absorption spectrum of the designed structure has three resonant absorption lines at the bandgap region of the photonic crystal. We can reconfigure the structure in the linear regime from nearly transparent to absorbent or vice versa in multiple resonant wavelengths by adjusting the temperature. Moreover, the system shows absorptive bistability by adjusting the intensity and incident angle of the input light. We discuss the tunability of the nonlinear absorption in detail. In the nonlinear regime, we show that, besides the temperature, the structure can be reconfigured from absorbent to transparent and vice versa by adjusting the incident optical power and the incident angle. We validate the results by examining the electric field distribution throughout the structure.

Bi-tunable terahertz absorber based on strontium titanate and Dirac semimetal

We proposed a polarization-insensitive absorber based on strontium titanate (STO) and bulk Dirac semimetal (BDS) in the terahertz (THz) region. The center frequency of the absorption peak can be independently regulated by temperature or Fermi energy level of STO or BDS, respectively. The numerical simulation result reveals that the peak absorptivity reaches to 99.98% at 2.16 THz when the temperature and Fermi energy were set at 300 K and 20 meV, respectively. Interestingly, by adjusting the temperature of STO from 250 to 400 K, the simulation results indicate that the center frequency can be tuned from 1.94 to 2.53 THz, and peak absorptivity can be maintained above 99% at normal incident. As the Fermi energy EF of Dirac semimetal increases from 10 to 60 meV, the center frequency can be changed from 2.14 to 2.44 THz and the amplitude of absorption peaks can be tuned from 99.9% to 82.8%. Impedance matching theory was used to understand the tunable performance. Furthermore, interference theory was employed to further explain the absorption mechanism of the proposed absorber. The absorber achieves bi-controlled absorptance via two independently controllable methods, which may provide guidance to research tunable, smart and multifunctional terahertz devices.

Tunable narrow terahertz absorption of one-dimensional photonic crystals embedded with Dirac semimetal-dielectric defect layers

The absorption characteristics of one-dimensional photonic crystals embedded with Dirac semimetal-dielectric defect layers are studied using the transfer matrix method. Numerical results show that our proposed structure can realize near-perfect narrow absorption for its strong field localization effects. The absorption frequency is tunable by adjusting the Fermi energy of the Dirac semimetal, temperature, permittivity of the dielectric, and the structural parameters. Moreover, double or multiple absorption channels can be achieved by changing the structure. Furthermore, the absorption performance is wide-angle and insensitive to polarization of the incident wave. Such properties exhibit potential value in designing selective absorbers and thermal detectors.